a mailbox command and which registers to copy back in when
the command completes, the bits being set need to not only
specify what bits you want to add from the default from the
table but also what bits you want *subtract* (mask) from the
default from the table.
A failing ISP2200 command pointed this out.
Much appreciation to: marius, who persisted and narrowed down what
the failure delta was, and shamed me into actually fixing it.
MFC after: 1 week
function is leaf. The frame allows ddb to not loose the direct caller
of bcopy() in backtrace.
Other functions from support.s would benefit from the same change as
well, but for now bcopy() is the most frequent offender.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
"Logical unit not supported" errors. First initiates specific target rescan,
second -- destroys specific LUN. That allows to automatically detect changes
in list of device LUNs. This mechanism doesn't work when target is completely
idle, but probably that is all what can be done without active polling.
Reviewed by: ken
Sponsored by: iXsystems, Inc.
additions.
* Add some new tracing events to aid in debugging.
* Add in a debugging mode to drop transmit and received frames, specifically
to test whether seeing or hearing heartbeats correctly cause LACP to
drop the port.
* Add in (and make default) a strict LACP mode, which requires the
heartbeat on a port to be heard before it's used. Sometimes vendor ports
will hang but the link layer stays up, resulting in hung traffic.
* Add logging the number of link status flaps, again to aid in debugging
badly behaving switch ports.
* Calculate the lagg interface port speed as the multiple of the
configured ports, rather than the largest.
Obtained from: Netflix
MFC after: 2 weeks
ixgbe driver. As it was, when building them as a module INET
and INET6 are not defined. In these drivers it does not cause
a panic, however it does result in different behavior in the
ioctl routine when you are using a module vs static, and I
think the behavior should be the same.
MFC after: 3 days
MFprojects/camlock r248982:
Stop abusing xpt_periph in random plases that really have no periph related
to CCB, for example, bus scanning. NULL value is fine in such cases and it
is correctly logged in debug messages as "noperiph". If at some point we
need some real XPT periphs (alike to pmpX now), quite likely they will be
per-bus, and not a single global instance as xpt_periph now.
when building the driver as a module the result of the present
system results in INET and INET6 being undefined, and will cause
the panic in ixgbe_tso_setup(). The Makefile in the module directory
now renders the conditional in the source unnecessary and wrong.
MFC after: ASAP - the panic as a module must not get into 9.2
duplicated sockets a multicast address is bound and either
SO_REUSEPORT or SO_REUSEADDR is set.
But actually it works for the following combinations:
* SO_REUSEPORT is set for the fist socket and SO_REUSEPORT for the new;
* SO_REUSEADDR is set for the fist socket and SO_REUSEADDR for the new;
* SO_REUSEPORT is set for the fist socket and SO_REUSEADDR for the new;
and fails for this:
* SO_REUSEADDR is set for the fist socket and SO_REUSEPORT for the new.
Fix the last case.
PR: 179901
MFC after: 1 month
block copy, when copying the superblock into the snapshot. UFS1 does
not align superblock on the block boundary, and bcopy runs off the end
of the buffer.
Reported by: Andre Albsmeier <Andre.Albsmeier@siemens.com>
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
changers that don't support the DVCID and CURDATA bits that were
introduced in the SMC spec.
These changers will return an Illegal Request type error if the
bits are set. This causes "chio status" to fail.
The fix is two-fold. First, for changers that claim to be SCSI-2
or older, don't set the DVCID and CURDATA bits for READ ELEMENT
STATUS. For newer changers (SCSI-3 and newer), we default to
setting the new bits, but back off and try the READ ELEMENT STATUS
without the bits if we get an Illegal Request type error.
This has been tested on a Qualstar TLS-8211, which is a SCSI-2
changer that does not support the new bits, and a Spectra T-380,
which is a SCSI-3 changer that does support the new bits. In the
absence of a SCSI-3 changer that does not support the bits, I
tested that with some error injection code. (The SMC spec says
that support for CURDATA is mandatory, and DVCID is optional.)
scsi_ch.c: Add a new quirk, CH_Q_NO_DVCID that gets set for
SCSI-2 and older libraries, or newer libraries that
report errors when the DVCID/CURDATA bits are set.
In chgetelemstatus(), use the new quirk to
determine whether or not to set DVCID and CURDATA.
If we get an error with the bits set, back off and
try without the bits. Set the quirk flag if the
read element status succeeds without the bits set.
Increase the READ ELEMENT STATUS timeout to 60
seconds after testing with a Spectra T-380. The
previous value was 10 seconds, and too short for
the T-380. This may be decreased later after
some additional testing and investigation.
Tested by: Andre Albsmeier <Andre.Albsmeier@siemens.com>
Sponsored by: Spectra Logic
MFC after: 3 days
Although using -i with -c does not seem very useful, it seems inappropriate
to read commands from the terminal in this case.
Side effect: if the -s -c extension is used and the -s option is turned off
using 'set +s' during the interactive part, the shell now exits after an
error or interrupt. Note that POSIX only specifies -s as option to sh, not
to set.
See also Austin Group issue #718.
Submitted by: "YAMAMOTO, Shigeru" <shigeru@iij.ad.jp>
Reviewed by: adrian
In PC-BSD 9.1, VIMAGE is enabled in the kernel config.
For laptops with Bluetooth capability, such as the HP Elitebook 8460p,
the kernel will panic upon bootup, because curthread->td_vnet
is not initialized.
Properly initialize curthread->td_vnet when initializing the Bluetooth stack.
This allows laptops such as the HP Elitebook 8460p laptop
to properly boot with VIMAGE kernels.
them changed (or was removed from the tree) then portsnap would delete
that file. This happened earlier today when one of two empty port
directories was removed. Uniquifying the lists of needed files fixes
this.
9.2-RELEASE candidate.
MFC after: 3 days
to drain the reserve. This was broken in r243040, causing deadlock.
Note that VM_WAIT call in case of uma_zalloc() failure from pagedaemon
would only wait for the v_pageout_free_min anyway.
Reported and tested by: pho
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
