Commit Graph

74015 Commits

Author SHA1 Message Date
Alexander Motin
1ddbcde832 ATA_FLUSHCACHE is a 36bit format command, not 48. 2009-08-30 15:36:56 +00:00
Alexander Motin
4dbabf1049 MFp4:
- Add Command Completion Coalescing support.
 - Add SNTF support.
 - Add two more power management modes (4, 5), implemented on driver level.
 - Fix interface mode setting.
 - Reduce interface reset time.
 - Do not report meaningless protocol/transport versions.
 - Report CAP2 register content.
 - Some performance optimizations.
2009-08-30 15:20:13 +00:00
Alexander Motin
35713642d9 MFp4:
- Add SNTF support.
 - Do not report meaningless transport/protocol versions.
2009-08-30 15:06:03 +00:00
Bjoern A. Zeeb
ecc2fda872 Make sure FreeBSD binaries without .note.ABI-tag section work
correctly and do not match a colliding Debian GNU/kFreeBSD
brandinfo statements.
For this mark the Debian GNU/kFreeBSD brandinfo that it must have
an .note.ABI-tag section and ignore the old EI_OSABI brandinfo
when comparing a possibly colliding set of options.

Due to SYSINIT we add the brandinfo in a non-deterministic order,
so native FreeBSD is not always first. We may want to consider
to force native FreeBSD to come first as well.

The only way a problem could currently be noticed is when running an
i386 binary without the .note.ABI-tag on amd64 and the Debian GNU/kFreeBSD
brandinfo  was matched first,  as the fallback to ld-elf32.so.1 does
not exist in that case.

Reported and tested by:	ticso
In collaboration with:	kib
MFC after:		3 days
2009-08-30 14:38:17 +00:00
Qing Li
42cb3aa492 Prefix on-link verification is being performed on statically
configured prefixes. Since these statically configured prefixes
do not have any associated advertising routers, these prefixes
are treated as unreachable and those prefix routes are deleted
from the routing table. Therefore bypass prefixes that are not
learned from router advertisements during prefix on-link check.

Reviewed by:	hrs
2009-08-30 02:07:23 +00:00
Konstantin Belousov
f25fa6abb2 Reverse r196640 and r196644 for now. 2009-08-29 21:53:08 +00:00
Konstantin Belousov
b6b2d1bf88 Dispose the kernel stack of the proper thread.
Submitted by:	alc
MFC after:	1 week
2009-08-29 18:01:02 +00:00
Robert Noland
cbc3c1f687 Swap the start/end virtual addresses in pmap_invalidate_cache_range().
This fixes the functionality on non SelfSnoop hardware.

Found by:	rnoland
Submitted by:	alc
Reviewed by:	kib
MFC after:	3 days
2009-08-29 16:01:21 +00:00
Konstantin Belousov
c3cf0b476f Remove the altkstacks, instead instantiate threads with kernel stack
allocated with the right size from the start. For the thread that has
kernel stack cached, verify that requested stack size is equial to the
actual, and reallocate the stack if sizes differ [1].

This fixes the bug introduced by r173361 that was committed several days
after r173004 and consisted of kthread_add(9) ignoring the non-default
kernel stack size.

Also, r173361 removed the caching of the kernel stacks for a non-first
thread in the process. Introduce separate kernel stack cache that keeps
some limited amount of preallocated kernel stacks to lower the latency
of thread allocation. Add vm_lowmem handler to prune the cache on
low memory condition. This way, system with reasonable amount of the
threads get lower latency of thread creation, while still not exhausting
significant portion of KVA for unused kstacks.

Submitted by:	peter [1]
Discussed with:	jhb, julian, peter
Reviewed by:	jhb
Tested by:	pho
MFC after:	1 week
2009-08-29 13:28:02 +00:00
John Baldwin
58e279db02 Mark the fake pages constructed by the OBJT_SG pager valid. This was
accidentally lost at one point during the PAT development.  Without this
fix vm_pager_get_pages() was zeroing each of the pages.

Submitted by:	czander @ NVidia
MFC after:	3 days
2009-08-29 02:17:40 +00:00
Warner Losh
3132ad0d1d Connect bwi up to the build. While there are some problems with this
driver still, it generally works well for most people most of the
time.  It is still too green for GENERIC, however.

Submitted by:	many (latest being kwm@)
MFC after:	2 days (before RC1 if possible)
2009-08-29 01:34:42 +00:00
Marko Zec
a26f987f5d Fix a few panics in linuxulator + VIMAGE due to curvnet not being set.
This change affects only options VIMAGE builds.

Reviewed by:	julian
MFC after:	3 days
2009-08-28 22:51:07 +00:00
Marko Zec
a99fcfd4ca Introduce a separate sx lock for protecting lists of vnet sysinit
and sysuninit handlers.

Previously, sx_vnet, which is a lock designated for protecting
the vnet list, was (ab)used for protecting vnet sysinit / sysuninit
handler lists as well.  Holding exclusively the sx_vnet lock while
invoking sysinit and / or sysuninit handlers turned out to be
problematic, since some of the handlers may attempt to wake up
another thread and wait for it to walk over the vnet list, hence
acquire a shared lock on sx_vnet, which in turn leads to a deadlock.
Protecting vnet sysinit / sysuninit lists with a separate lock
mitigates this issue, which was first observed with
flowtable_flush() / flowtable_cleaner() in sys/net/flowtable.c.

Reviewed by:	rwatson, jhb
MFC after:	3 days
2009-08-28 22:30:55 +00:00
John Baldwin
2fa8c8d21e Extend the device pager to support different memory attributes on different
pages in an object.
- Add a new variant of d_mmap() currently called d_mmap2() which accepts
  an additional in/out parameter that is the memory attribute to use for
  the requested page.
- A driver either uses d_mmap() or d_mmap2() for all requests but not both.
  The current implementation uses a flag in the cdevsw (D_MMAP2) to indicate
  that the driver provides a d_mmap2() handler instead of d_mmap().  This
  is done to make the change ABI compatible with existing drivers and
  MFC'able to 7 and 8.

Submitted by:	alc
MFC after:	1 month
2009-08-28 14:06:55 +00:00
Ed Schouten
f105c8be8c Hook up the pty(4) module to the build. 2009-08-28 10:23:40 +00:00
Michael Tuexen
2b77dd0181 Fix a bug where vlan interfaces are not supported by SCTP.
Approved by: rrs (mentor)
MFC after: 3 days
2009-08-28 08:41:59 +00:00
Qing Li
9231d35f4d In ip_output(), the flow-table module must not try to cache L2/L3
information for interface of IFF_POINTOPOINT or IFF_LOOPBACK type.
Since the L2 information (rt_lle) is invalid for these interface
types, accidental caching attempt will trigger panic when the invalid
rt_lle reference is accessed.

When installing a new route, or when updating an existing route, the
user supplied gateway address may be an interface address (this is
particularly true for point-to-point interface related modules such
as ppp, if_tun, if_gif). Currently the routing command handler always
set the RTF_GATEWAY flag if the gateway address is given as part of the
command paramters. Therefore the gateway address must be verified against
interface addresses or else the route would be treated as an indirect
route, thus making that route unusable.

Reviewed by:	kmacy, julia, rwatson
Verified by:	marcus
MFC after:	3 days
2009-08-28 07:01:09 +00:00
Qing Li
0437a93339 Do not try to free the rt_lle entry of the cached route in
ip_output() if the cached route was not initialized from the
flow-table. The rt_lle entry is invalid unless it has been
initialized through the flow-table.

Reviewed by:	kmacy, rwatson
MFC after:	immediately
2009-08-28 05:37:31 +00:00
Sam Leffler
4b9222b7ea revert r196600; didn't notice it'd been done already
Submitted by:	jhay
2009-08-27 17:55:44 +00:00
Sam Leffler
c1d8b5aadd change default regdomain for thailand
Obtained from:	linux-wireless@kernel.org
2009-08-27 17:42:37 +00:00
Sam Leffler
418db7a1b2 enable mesh by default 2009-08-27 17:33:44 +00:00
Jamie Gritton
c4884ffa6f Fix a LOR between allprison_lock and vnode locks by releasing
allprison_lock before releasing a prison's root vnode.

PR:		kern/138004
Reviewed by:	kib
Approved by:	bz (mentor)
MFC after:	3 days
2009-08-27 16:15:51 +00:00
Pawel Jakub Dawidek
07a93e6b3c There's no need for checking result of M_WAITOK allocation. 2009-08-27 08:40:51 +00:00
Pawel Jakub Dawidek
c16ce31b31 Fix an obvious topology lock leak.
MFC after:	3 days
2009-08-27 08:28:34 +00:00
Qing Li
7bcee7f336 When multiple interfaces exist in the system, with each interface having
an IPv6 address assigned to it, and if an incoming packet received on
one interface has a packet destination address that belongs to another
interface, the routing table is consulted to determine how to reach this
packet destination. Since the packet destination is an interface address,
the route table will return a host route with the loopback interface as
rt_ifp. The input code must recognize this fact, instead of using the
loopback interface, the input code performs a search to find the right
interface that owns the given IPv6 address.

Reviewed by:	bz, gnn, kmacy
MFC after:	immediately
2009-08-26 21:32:50 +00:00
Stanislav Sedov
622247c0fb - Add quirk for Sony DSC digital cameras. This umass devices fail
to attach without these quirks applied.

PR:		usb/137035
URL:		http://lists.freebsd.org/pipermail/freebsd-current/2009-August/010852.html
Reported by:	Henri Hennebert <hlh@restart.be>, Andrey V. Elsukov <bu7cher@yandex.ru>
MFC after:	1 week
2009-08-26 21:14:28 +00:00
Marius Strobl
5486ffc898 Add a temporary workaround which just lets init die instead of
causing a panic if it is killed due to a unsolved stack overflow
seen very late during shutdown on sparc64 when the gmirror worker
process exists, which is a regression introduced in 8.0.

Reviewed by:	kib
MFC after:	3 days
2009-08-26 21:10:47 +00:00
Konstantin Belousov
4f4946d337 Honor the vfs.timestamp_precision sysctl settings for utimes(path, NULL)
and similar calls.

Obtained from:	Petr Salinger, Debian GNU/kFreeBSD, Debian bug #489894
MFC after:	3 days
2009-08-26 14:32:37 +00:00
Robert Watson
ed2dabfc68 Add IFNET_HOLD reserved pointer value for the ifindex ifnet array,
which allows an index to be reserved for an ifnet without making
the ifnet available for management operations.  Use this in if_alloc()
while the ifnet lock is released between initial index allocation and
completion of ifnet initialization.

Add ifindex_free() to centralize the implementation of releasing an
ifindex value.  Use in if_free() and if_vmove(), as well as when
releasing a held index in if_alloc().

Reviewed by:	bz
MFC after:	3 days
2009-08-26 11:13:10 +00:00
Jilles Tjoelker
74d1c4927a Fix poll() on half-closed sockets, while retaining POLLHUP for fifos.
This reverts part of r196460, so that sockets only return POLLHUP if both
directions are closed/error. Fifos get POLLHUP by closing the unused
direction immediately after creating the sockets.

The tools/regression/poll/*poll.c tests now pass except for two other things:
- if POLLHUP is returned, POLLIN is always returned as well instead of only
  when there is data left in the buffer to be read
- fifo old/new reader distinction does not work the way POSIX specs it

Reviewed by:	kib, bde
2009-08-25 21:44:14 +00:00
Robert Watson
61f6986b07 Break out allocation of new ifindex values from if_alloc() and if_vmove(),
and centralize in a single function ifindex_alloc().  Assert the
IFNET_WLOCK, and add missing IFNET_WLOCK in if_alloc().  This does not
close all known races in this code.

Reviewed by:	bz
MFC after:	3 days
2009-08-25 20:21:16 +00:00
Max Laier
c31650ade1 Fix argument ordering to memcpy as well as the size of the copy in the
(theoretical) case that pfi_buffer_cnt should be greater than ~_max.

Submitted by:	pjd
Reviewed by:	{krw,sthen,markus}@openbsd.org
MFC after:	3 days
2009-08-25 19:30:32 +00:00
Andrew Thompson
51e8c0d6c6 It is possible for all the kthreads to exit (hci modules unloaded) which in
turn ends our usb process. This means the proc pointer becomes invalid and will
panic if a new kthread is added. Count the number of threads and clear the proc
pointer on the last one.

Suggested by:	julian
MFC after:	3 days
2009-08-25 16:59:55 +00:00
Gleb Smirnoff
08cc4f3542 Fix build broken in r196524. 2009-08-25 14:08:33 +00:00
Rafal Jaworowski
7ec5aa41ca Introduce SheevaPlug support.
- The device is based on Marvell 88F6281 system on chip.
  - More info about the platform at http://www.plugcomputer.org

  - To build the FreeBSD kernel:
    make buildkernel TARGET_ARCH=arm KERNCONF=SHEEVAPLUG

  - Installation notes at: http://wiki.freebsd.org/FreeBSDMarvell

Submitted by:	Michal Hajduk
Obtained from:	Semihalf
2009-08-25 10:09:25 +00:00
Robert Watson
dc56e98f0d Use locks specific to the lltable code, rather than borrow the ifnet
list/index locks, to protect link layer address tables.  This avoids
lock order issues during interface teardown, but maintains the bug that
sysctl copy routines may be called while a non-sleepable lock is held.

Reviewed by:	bz, kmacy
MFC after:	3 days
2009-08-25 09:52:38 +00:00
Rafal Jaworowski
18159f6a49 Introduce MII_ADDR_BASE option on ARM, which allows to override the default
per platform requirements.

Notes:
- Only used by mge(4) at the moment.

- This is very simplified approach and should be replaced by some long-term
  solution for managing the board/platform configuration (among others the
  MAC-PHY binding info).

Submitted by:	Michal Hajduk
Obtained from:	Semihalf
2009-08-25 09:47:12 +00:00
Rafal Jaworowski
c0d853f6b9 Exclude common Kirkwood settings so they can be shared among various platforms
based on this SOC. This is a preliminary step for SheevaPlug support.

Submitted by:	Michal Hajduk
Obtained from:	Semihalf
2009-08-25 09:39:11 +00:00
Rafal Jaworowski
5694b144c0 Properly handle initial state of power mgmt.
Modules on Marvell SOC can be selectively PM-disabled, and we must not access
disabled devices' registers (attempt to initialize them) unconditionally, as
this leads to the system hang. This patch introduces graceful handling of the
PM state during devices init.

Submitted by:	Michal Hajduk
Obtained from:	Semihalf
2009-08-25 09:35:50 +00:00
Rafal Jaworowski
a7817ce466 Eliminate platform_pmap_init() to simplify Marvell bootstrap code. 2009-08-25 09:30:03 +00:00
Warner Losh
58a745889f Rather than havnig enabled/disabled, implement a max queue depth.
While usually not an issue, this firewalls bugs in the code that may
run us out of memory.

Fix a memory exhaustion in the case where devctl was disabled, but the
link was bouncing.  The check to queue was in the wrong place.

Implement a new sysctl hw.bus.devctl_queue to control the depth.  Make
compatibility hacks for hw.bus.devctl_disable to ease transition.

Reviewed by:	emaste@
Approved by:	re@ (kib)
MFC after:	asap
2009-08-25 06:25:59 +00:00
Xin LI
c5bebef869 Fix VESA modes and allow 8bit depth modes.
PR:		i386/124902
Submitted by:	paradox <ddkprog yahoo com>
MFC after:	2 months
2009-08-24 22:35:53 +00:00
John Baldwin
2fcd493c4b Tweak the way that the ACPI and ISA bus drivers match hint devices to
BIOS-enumerated devices:
- Assume a device is a match if the memory and I/O ports match even if the
  IRQ or DRQ is wrong or missing.  Some BIOSes don't include an IRQ for
  the atrtc device for example.
- Add a hack to better match floppy controller devices.  Many BIOSes do not
  include the starting port of the floppy controller listed in the hints
  (0x3f0) in the resources for the device.  So far, however, all the BIOS
  variations encountered do include the 'port + 2' resource (0x3f2), so
  adjust the matching for "fdc" devices to look for 'port + 2'.

Reviewed by:	imp
MFC after:	3 days
2009-08-24 21:51:46 +00:00
Jack F Vogel
3de029efaf When bridging LRO is causing a problem, the believe
that it would work as long as all interfaces have TSO
seems to be false, until the matter gets sorted out
just disable LRO completely.
2009-08-24 21:04:51 +00:00
Jack F Vogel
d166ef5286 A couple of changes: first, make header split on by default
and remove from its dependency on LRO, my tests have shown
that its always beneficial, even when doing bridging.
Second, fix up a few problems in the statistics code, the
adapter dependencies had gotten lost so some code that should
only run on 82599 was always running, this resulted in bogus
flow control numbers on 82598.
2009-08-24 20:41:51 +00:00
Pyun YongHyeon
e4d5e24821 Don't try to power down PHY when alc(4) failed to map the device.
This fixes system crash when mapping alc(4) device failed in device
attach.

Reported by:	Jim < stapleton.41 <> gmail DOT com >
MFC after:	3 days
2009-08-24 20:37:15 +00:00
Pyun YongHyeon
5fa06abe89 Add RTL8168DP/RTL8111DP device id. While I'm here append "8111D" to
the description of RTL8168D as RL_HWREV_8168D can be either
RTL8168D or RTL8111D.

PR:	kern/137672
MFC after:	3 days
2009-08-24 18:58:13 +00:00
Bjoern A. Zeeb
89ffc202d6 Fix handling of .note.ABI-tag section for GNU systems [1].
Handle GNU/Linux according to LSB Core Specification 4.0,
Chapter 11. Object Format, 11.8. ABI note tag.

Also check the first word of desc, not only name, according to
glibc abi-tags specification to distinguish between Linux and
kFreeBSD.

Add explicit handling for Debian GNU/kFreeBSD, which runs
on our kernels as well [2].

In {amd64,i386}/trap.c, when checking osrel of the current process,
also check the ABI to not change the signal behaviour for Linux
binary processes, now that we save an osrel version for all three
from the lists above in struct proc [2].

These changes make it possible to run FreeBSD, Debian GNU/kFreeBSD
and Linux binaries on the same machine again for at least i386 and
amd64, and no longer break kFreeBSD which was detected as GNU(/Linux).

PR:		kern/135468
Submitted by:	dchagin [1] (initial patch)
Suggested by:	kib [2]
Tested by:	Petr Salinger (Petr.Salinger seznam.cz) for kFreeBSD
Reviewed by:	kib
MFC after:	3 days
2009-08-24 16:19:47 +00:00
Robert Watson
8e937462f4 Make if_grow static -- it's not used outside of if.c, and with the
internals destined to change, it's better if it remains that way.

MFC after:	3 days
2009-08-24 12:52:05 +00:00
Michael Tuexen
24ae5c4a73 This fixes a bug where the value set by SCTP_PARTIAL_DELIVERY_POINT
was not honored, if the socket buffer size was not 4 times that large.

Approved by: rrs (mentor)
MFC after: 3 days.
2009-08-24 11:46:40 +00:00