Sort a few VHT160 and 80+80 lines, update some comments, and remove
a superfluous ','.
No functional changes intended.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
VirtFS allows sharing an arbitrary directory tree between bhyve virtual
machine and the host. Current implementation has a fairly complete support
for 9P2000.L protocol, except for the extended attribute support. It has
been verified to work with the qemu-kvm hypervisor.
Reviewed by: rgrimes, emaste, jhb, trasz
Approved by: trasz (mentor)
MFC after: 1 month
Relnotes: yes
Sponsored by: Conclusive Engineering (development), vStack.com (funding)
Differential Revision: https://reviews.freebsd.org/D10335
newlocale() optionally takes a "base" locale, from which components not
specified in the mask are inherited. POSIX says that newlocale() may
modify "base" and return it, or free "base" and return a newly allocated
locale. We were not doing either, so applications which use newlocale()
to modify an existing base locale end up leaking memory on FreeBSD.
This diff fixes the leak by releasing a reference to the base locale
before returning. This is less efficient than modifying "base"
directly, but is simpler for an initial bug fix. Also, update the man
page to clarify behaviour with respect to "base".
PR: 249416
MFC after: 3 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26522
r366344 fixed and reenabled the assembly optimized skein implementation,
but skein_block objects were not being rebuilt in no-clean builds. This
resulted in failing no-clean builds. SKEIN_USE_ASM controls which
routines come from C vs assembly, and with no explicit dependency
r366344's change to SKEIN_USE_ASM did not cause skein_block.{o,pico}
to be rebuilt.
Add a dependency on this Makefile for the skein_block objects. This
dependency is broader in scope than absolutely required (that is, the
skein_block objects will now be rebuilt on any change to this Makefile).
There are ways this could be addressed, but it is probably not worth the
additional effort or testing time to pursue them.
PR: 248221
Reported by: kevans, Jeremy Faulkner
Discussed with: kevans
Sponsored by: The FreeBSD Foundation
The assembly implementation incorrectly used logical AND instead of
bitwise AND. Fix, and re-enable in libmd.
Submitted by: Yang Zhong <yzhong@freebsdfoundation.org>
Reviewed by: cem (earlier)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26614
The warning generated pre-r366207 is actually a sign comparison warning:
error: comparison of integers of different signs: 'unsigned long' and 'int'
if (strlcpy(buf, execpath, buflen) >= buflen)
Revert parts that affected other lines and just cast this to unsigned int.
The buflen < 0 -> EINVAL has been kept despite no longer serving any
purposes w.r.t. sign-extension because I do believe it's the right thing to
do: "The provided buffer was not the right size for the requested item."
The original warning is confirmed to still be gone with an:
env WARNS=6 make WITHOUT_TESTS=yes.
Reviewed by: asomers, kib
X-MFC-With: r366207
Differential Revision: https://reviews.freebsd.org/D26631
Define separate dependent targets which `afterinstallconfigs` relies on, in
order to modify `${DESTDIR}/etc/master.passwd` and
`${DESTDIR}/etc/nsswitch.conf`.
Mark these targets .PHONY, since they manipulate configurations on the fly and
the generation logic isn't 100% defined in terms of the source files/logic,
and is variable, based on MK_foo flags.
MFC after: 2 weeks
Reviewed by: bapt, brd
Differential Revision: https://reviews.freebsd.org/D20330
Repeating the default WARNS here makes it slightly more difficult to
experiment with default WARNS changes, e.g. if we did something absolutely
bananas and introduced a WARNS=7 and wanted to try lifting the default to
that.
Drop most of them; there is one in the blake2 kernel module, but I suspect
it should be dropped -- the default WARNS in the rest of the build doesn't
currently apply to kernel modules, and I haven't put too much thought into
whether it makes sense to make it so.
Due to the sqlite3 endian detection code preferring to check platform defines
instead of checking endian defines, it is necessary to manually set
the endianness on PowerPC64LE.
Unlike other bi-endian platforms, PowerPC64LE relies entirely on the
generic endianness macros like __BYTE_ORDER__ and has no platform-specific
define to denote little endian.
Add -DSQLITE_BYTEORDER=1234 to the CFLAGS when building libsqlite3 on
powerpc64le.
Fixes runtime operation of sqlite on PowerPC64LE.
Sponsored by: Tag1 Consulting, Inc.
gdtoa wins the award for "most outdated endianness naming convention"
with its IEEE_8087 vs IEEE_MC68k defines. I had a good chuckle.
Update softfloat and arith.h to adjust to BE or LE automatically
based on the low level preprocessor defines.
Fixes printf/scanf on PowerPC64LE, although there is still a problem
lurking regarding Signalling NaNs...
Sponsored by: Tag1 Consulting, Inc.
Given that we have converted to ELFv2 for BE already, endianness is the only
difference between the two ARCHs.
As such, there is no need to differentiate LIBC_ARCH between the two.
Combining them like this lets us avoid needing to have two copies of several
bits for no good reason.
Sponsored by: Tag1 Consulting, Inc.
On Ampere Altra systems, the sparse population of RAM within the
physical address space causes the vm_page_dump bitmap to be much
larger than necessary, increasing the size from ~8 Mib to > 2 Gib
(and overflowing `int` for the size).
Changing the page dump bitmap also changes the minidump file
format, so changes are also necessary in libkvm.
Reviewed by: jhb
Approved by: scottl (implicit)
MFC after: 1 week
Sponsored by: Ampere Computing, Inc.
Differential Revision: https://reviews.freebsd.org/D26131
bootonce feature is temporary, one time boot, activated by
"bectl activate -t BE", "bectl activate -T BE" will reset the bootonce flag.
By default, the bootonce setting is reset on attempt to boot and the next
boot will use previously active BE.
By setting zfs_bootonce_activate="YES" in rc.conf, the bootonce BE will
be set permanently active.
bootonce dataset name is recorded in boot pool labels, bootenv area.
in case of nextboot, the nextboot_enable boolean variable is recorded in
freebsd:nvstore nvlist, also stored in boot pool label bootenv area.
On boot, the loader will process /boot/nextboot.conf if nextboot_enable
is "YES", and will set nextboot_enable to "NO", preventing /boot/nextboot.conf
processing on next boot.
bootonce and nextboot features are usable in both UEFI and BIOS boot.
To use bootonce/nextboot features, the boot loader needs to be updated on disk;
if loader.efi is stored on ESP, then ESP needs to be updated and
for BIOS boot, stage2 (zfsboot or gptzfsboot) needs to be updated
(gpart or other tools).
At this time, only lua loader is updated.
Sponsored by: Netflix, Klara Inc.
Differential Revision: https://reviews.freebsd.org/D25512
by Steve Kargl:
- Use sincos[f] instead of a call to cos[f] and a call to sin[f].
- While here, alphabetize declaration.
Submitted by: sgk at troutmask.apl.washington.edu (Steve Kargl)
- Micro-optimization: use sincosl(x) instead of a call to cosl(x) and
a call to sinl(x). Argument reduction is done once not twice.
- Use a long double constant instead of an invalid double constant.
- Spell scale2 correctly
He could not test ld128, so that patch is untested.
Submitted by: sgk at troutmask.apl.washington.edu (Steve Kargl)
API to the sbget() and sbput() interfaces. Specifically they take
a file descriptor pointer rather than the struct uufsd *disk pointer
used by the libufs cgread() and cgwrite() interfaces. Update fsck_ffs
to use these revised interfaces.
No functional changes intended.
Sponsored by: Netflix
Sometimes nscd(8) will return a 1-byte buffer for a nonexistent entry. This
triggered an integer underflow in grp_unmarshal_func, causing getgrnam_r to
return ERANGE instead of 0.
Fix the user's buffer size check, and add a correct check for a too-small
nscd buffer.
PR: 248932
Event: September 2020 Bugathon
Reviewed by: markj
MFC after: 2 weeks
Sponsored by: Axcient
Differential Revision: https://reviews.freebsd.org/D26204
The current default is provided in various Makefile.inc in some top-level
directories and covers a good portion of the tree, but doesn't cover parts
of the build a little deeper (e.g. libcasper).
Provide a default in src.sys.mk and set WARNS to it in bsd.sys.mk if that
variable is defined. This lets us relatively cleanly provide a default WARNS
no matter where you're building in the src tree without breaking things
outside of the tree.
Crunchgen has been updated as a bootstrap tool to work on this change
because it needs r365605 at a minimum to succeed. The cleanup necessary to
successfully walk over this change on WITHOUT_CLEAN builds has been added.
There is a supplemental project to this to list all of the warnings that are
encountered when the environment has WARNS=6 NO_WERROR=yes:
https://warns.kevans.dev -- this project will hopefully eventually go away
in favor of CI doing a much better job than it.
Reviewed by: emaste, brooks, ngie (all earlier version)
Reviewed by: emaste, arichardson (depend-cleanup.sh change)
Differential Revision: https://reviews.freebsd.org/D26455
I was investigating libarchive test failures on CheriBSD and it turns out
we get a reproducible SIGBUS for test_archive_m5, etc. Debugging this shows
that libarchive and the tests disagree when it comes to the definition of
archive_md5_ctx: libarchive assumes it's the OpenSSL type whereas the test
use the libmd type. The latter is not necessarily aligned enough to store
a pointer (16 bytes for CHERI RISC-V), so we were crashing when storing
EVP_MD_CTX* to an 8-byte-aligned archive_md5_ctx.
To avoid problems like this in the future, factor out the common compiler
flags into a Makefile.inc and include that from the tests Makefile.
Reviewed By: lwhsu
Differential Revision: https://reviews.freebsd.org/D26469
Use MACHINE_CPUARCH with arm64 (aarch64) when we build code that could run
on any 64-bit Arm instruction set. This will simplify checks in downstream
consumers targeting prototype instruction sets.
The only place we check for MACHINE_ARCH == aarch64 is when building the
device tree blobs. As these are targeting current generation ISAs.
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D26370
This would allow interested parties to do experimental runs with an
environment set appropriately to raise all the warnings throughout the
build; e.g. env WARNS=6 NO_WERROR=yes buildworld.
Not currently touching the numerous instances in ^/tools.
MFC after: 1 week
This also fixes a minor issue that was missed in the initial review; the
layout of the MFD_HUGE_* flags is actually not 1:1 bit:flag -- it instead
borrowed the Linux convention of how this is laid out since it was
originally implemented on Linux, the top 6 bits represent the shift required
for the requested page size.
This allows us to remove the flag <-> pgsize mapping table and simplify the
logic just prior to validation of the requested page size.
While we're here, fix two small nits:
- HUGETLB memfd shouldn't exhibit the SHM_GROW_ON_WRITE behavior. We can
only grow largepage shm by appropriately aligned (i.e. requested pagesize)
sizes, so it can't work in the typical/sane fashion. Furthermore, Linux
does the same, so let's be compatible.
- We don't allow MFD_HUGETLB without specifying a pagesize, so no need to
check for that later.
Reviewed by: kib (slightly earlier version)
Literally returning EINVAL from a function designed to return an fd makes
for interesting scenarios.
I cannot assign enough pointy hats to cover this one.
r365524 did accidentally invert this check that sets SHM_LARGEPAGE, leading
non-hugetlb memfd as unconfigured largepage shm and thus test failures when
we try to ftruncate or write to them.
PR: 249236
Discussed with: kib
Found this while trying to get macOS bootstrap to work again after OpenZFS merge.
Reviewed By: #zfs, freqlabs
Differential Revision: https://reviews.freebsd.org/D26192
largepage shm objects.
And since we can, add memfd_create(MFD_HUGETLB) support, hopefully
close enough to the Linux feature.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D24652
for clang, as it uses clang specific builtins, and does not compile
correctly with gcc. Note that gcc packages usually come with their own
libatomic, providing these primitives.
PR: 230888
MFC after: 3 days
X-MFC-With: r364753
getlogin_r is specified by POSIX to to take a size_t len, not int. Fix our
version to do the same, bump the symbol version due to ABI change and
provide compat.
This was reported to break compilation of Ruby 2.8.
Some discussion about the necessity of the ABI compat did take place in the
review. While many 64-bit platforms would likely be passing it in a 64-bit
register and zero-extended and thus, not notice ABI breakage, some do
sign-extend (e.g. mips).
PR: 247102
Submitted by: Bertram Scharpf <software@bertram-scharpf.de> (original)
Submitted by: cem (ABI compat)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D26335
This is being addressed as part of a side-patch I'm working on that builds
all the things with WARNS=6, instead of relying on it being supplied in just
shallow parts of the build with higher-level Makefile.inc.
Provide a prototype for mod_main and annotate the thread function argument
as unused.
MFC after: 1 week
In a side-change that I'm working on to start defaulting src builds to
WARNS=6 where WARNS isn't otherwise specified, GCC6 (and clang, to a lesser
extent) pointed out a number of issues with the resolv tests:
- Global method variable that gets shadowed in run_tests()
- Signed/unsigned comparison between i in run_tests() and hosts->sl_cur
The shadowed variable looks like it might actually be bogus as written, as
we pass it to RUN_TESTS -> run_tests, but other parts use the global method
instead. This change is mainly geared towards correcting that by removing
the global and plumbing the method through from run_tests -> run into the
new thread.
For the signed/unsigned comparison, there's no compelling reason to not just
switch i/nthreads/nhosts to size_t.
The review also included a change to the load() function that was better
addressed by jhb in r365302.
Reviewed by: ngie, pstef
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D24844
Implement the remaining pieces needed to allow userland timestamp reading.
Rewritten based on an intial essay into the problem by Justin Hibbits.
(Copyright changed to my own on his request.)
Tested on ppc64 (POWER9 Talos II), powerpcspe (e500v2 RB800), and
powerpc (g4 PowerBook).
Reviewed by: jhibbits (in irc)
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D26347
MK_MALLOC_PRODUCTION option on -CURRENT.
Also, for the sake of backwards compatibility, support the old way of
enabling 'production malloc', e.g. by adding a define in make.conf(5).
MFC after: 1 week
X-MFC-With: r365371
For historical reasons, defining MALLOC_PRODUCTION in /etc/make.conf has
been used to turn off potentially expensive debug checks and statistics
gathering in the implementation of malloc(3).
It seems more consistent to turn this into a regular src.conf(5) option,
e.g. WITH_MALLOC_PRODUCTION / WITHOUT_MALLOC_PRODUCTION. This can then
be toggled similar to any other source build option, and turned on or
off by default for e.g. stable branches.
Reviewed by: imp, #manpages
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D26337
