to initialize the buffer array in ata_raid_attach() by removing the
initializer. There's no memset(?) in the kernel. Instead, assign
'\0' to the first element. The buffer array holds strings only, so
this is functionally equivalent.
Applies to: ia64
Tripped over by: tinderbox
I missed. Since I did no rearrange any softcs, casting the result of
device_get_softc() to (struct ifnet **) and derefrencing it yeilds a
pointer to the ifp. This makes at least vr(4) nics work.
files after they were repo-copied to sys/dev/atkbdc. The sources of
atkbdc(4) and its children were moved to the new location in preparation
for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in
order to not further scatter them over the whole tree which would have
been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another
reason for the repo-copies was that some of the sources were misfiled,
e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging
atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly.
Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't
ISA-specific.
- Separate the parts of atkbdc_isa.c which aren't actually ISA-specific
but are shareable between different atkbdc(4) bus front-ends into
atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use
bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource()
respectively in atkbdc_isa.c instead of rolling own versions.
- Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for
atkbdc(4). PS/2 controllers and input devices are used on a couple of
Sun OEM boards and occur on either the EBus or the ISA bus. Depending on
the board it's either the only on-board mean to connect a keyboard and
mouse or an alternative to either RS232 or USB devices.
- Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled
without isa(4) (e.g. for EBus-only machines). This ISA-specific part
isn't separated into its own source file, yet, as it requires more work
than was feasible for 6.0 in order to do it in a clean way. Actually
philip@ is working on a rewrite of psm(4) so a more comprehensive
clean-up and separation of hardware dependent and independent parts is
expected to happen after 6.0.
Tested on: i386, sparc64 (AX1105, AXe and AXi boards)
Reviewed by: philip
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.
This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.
Other changes of note:
- Struct arpcom is no longer referenced in normal interface code.
Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
To enforce this ac_enaddr has been renamed to _ac_enaddr.
- The second argument to ether_ifattach is now always the mac address
from driver private storage rather than sometimes being ac_enaddr.
Reviewed by: sobomax, sam
- Initialize val_ec with the content of the volume EC register
for ACPI_IBM_METHOD_VOLUME and ACPI_IBM_METHOD_MUTE in acpi_ibm_sysctl_set()
if there is no CMOS handle present. This fixes setting volume and mute on
such models.
Submitted by: ru
Approved by: philip
- Restructured for easier extensibility and maintainability
- To be more uniform with the other ACPI extras drivers and to better reflect
their actual meaning, some sysctls were moved:
o brightness -> lcd_brightness
o keylight -> thinklight
o enable -> events
o misckey -> hotkey
o avail_mask -> availmask
o key_mask -> eventmask
- New "initialmask" sysctl, which holds the initial eventmask
- The "wlan" sysctl is now read-only, since writing to it didn't have
any effect
- The "version" sysctl was removed, since it seems to be the same (0x100)
on all models I have seen
- Support for more hotkeys by the "hotkey" sysctl
- Improved support of ACPI events. Disabled by default, since it unexpectedly
changes the behaviour of some keys. (on my T41p there are now 24 different
keypress events that get reported)
- write support for: volume, mute, lcd_brightness and thinklight
- led(4) interface for the thinklight [1]
- New sysctls "fan" and "fan_speed" to support reading of fan status and speed
- New sysctl "thermal" to support reading of up to 8 thermal sensors
Reviewed by: philip
Approved by: philip
Submitted by: simon [1]
Inspired by: The Linux ibm_acpi driver by Borislav Deianov
http://ibm-acpi.sourceforge.net/
The ThinkPad Button program (tpb) by Markus Braun
http://www.nongnu.org/tpb/
Thanks to: brueffer, dvl, njl, philip, simon, takawata and the many
testers from freebsd-acpi@ and freebsd-mobile@
- Implement sampling modes and logging support in hwpmc(4).
- Separate MI and MD parts of hwpmc(4) and allow sharing of
PMC implementations across different architectures.
Add support for P4 (EMT64) style PMCs to the amd64 code.
- New pmcstat(8) options: -E (exit time counts) -W (counts
every context switch), -R (print log file).
- pmc(3) API changes, improve our ability to keep ABI compatibility
in the future. Add more 'alias' names for commonly used events.
- bug fixes & documentation.
o purge ath_initkeytable; it's not needed
o add multicast key search support for supporting multiple group keys
(disabled for now; requires updated hal)
o create keycache entry for stations using open auth so they get h/w
antenna management support
o add keycache -> node mapping table; eliminates mac-based lookup in
the net80211 layer
mutex instead of a MTX_DEF one in order to defer preemption while
reading the date and time registers. If we don't manage to read them
within the time slot where we are guaranteed that no updates occur we
might actually read them during an update in which case the output is
undefined.
times which was added in the last revision with what should be a proper
solution as long as keyboards that were pluggged in after the kernel
has fully booted aren't supported. I.e. when sunkbd_configure() is
called for the high-level console probe make sure that the keyboard is
both successfully configured (i.e. also probed) and attached. The band-
aid left the possibility to attach the keyboard device to the high-level
console without attaching the keyboard device itself when the keyboard
is plugged in after uart(4) attached but before syscons(4) does.
share their IRQ lines with the i8042. Any IRQ activity (typically during
attach) on the NS16550 used to connect the keyboard when actually the
PS/2 keyboard is selected in OFW causes interaction with the OBP i8042
driver resulting in a hang (and vice versa). As RS232 keyboards and mice
obviously aren't meant to be used in parallel with PS/2 ones on these
boards don't attach to these NS16550 in case the RS232 keyboard isn't
selected in order to prevent such hangs.
Ok'ed by: marcel
UARTs used to connect keyboards and not also PS/2 keyboards and only
return their package handle in case the keyboard is the preferred one
according to the OFW but otherwise still regardless of whether the
keyboard is used for stdin or not. This is simply achieved by looking
at the 'keyboard' alias and returning the corresponding package handle
in case it refers to a SCC/UART. This is change is done in order to
give the keyboard which the OFW or the user selected in OFW on boards
that support additional types of keyboards besides the RS232 ones also
preference in FreeBSD. It will be also used to determine on Sun AXi and
Sun AXmp boards whether a PS/2 or a RS232 is to be used as these are
sort of mutual exclusive there (see upcoming commit to uart_bus_ebus.c).
Note that Tatung AXi boards have the same issue but the former code
happened to already give the PS/2 keyboard preference by not identifying
the respective UART as keyboard system device there because the PS/2
keyboard node precedes the keyboard UART one in the OFW device tree of
these boards (which isn't the case for the Sun AXi).
Ok'ed by: marcel
the number of registered adapters instead of determining again whether
stdout is a supported card (and which might have failed to attach and
register).
- Fix a bug in the handling of the FBIOSCURSOR IOCTL; the code was meant
to return ENODEV for all invocations expect when used to disable the
cursor and not just when used for enabling the cursor.
- In case the adapter is the OFW stdout move its OFW cursor to the start
of the last line on halt so OFW output doesn't get intermixed with what
FreeBSD left on the screen.
- Drop variable names in the prototypes of some functions in order to
match the style of majority of the prototypes in this file.
the number of registered adapters instead of determining again whether
stdout is a supported card (and which might have failed to attach and
register).
- Drop creator_set_mode() and move the relevant parts to creator_fill_rect()
and creator_putc() respectively. This is a bit cleaner than having to
make sure that creator_set_mode() was called before creator_fill_rect()
or creator_putc() are used and matches better what Xorg does.
- Fix a bug in the handling of the FBIOSCURSOR IOCTL; the code was meant
to return ENODEV for all invocations expect when used to disable the
cursor and not just when used for enabling the cursor.
- In case the adapter is the OFW stdout move its OFW cursor to the start
of the last line on halt so OFW output doesn't get intermixed with what
FreeBSD left on the screen. With hindsight this is what the faking of a
hardware cursor which was removed in the last revision really was about,
i.e. to keep the OFW updated about the current cursor position. The new
approach however is simpler while producing the same result and doesn't
cause the first letter of the OFW output to be turned into a blank and
a newline.
- Add variable names to the prototypes of creator_cursor_*() which were
added in the last revision and list them alphabetically in order to match
the style of this file.
