A doomed VI does not have a valid ifnet.
Reported by: Jithesh Arakkan @ Chelsio
Reviewed by: np
MFC after: 1 week
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D29662
There haven't been any non-obscure drivers that supported this
functionality and it has been impossible to test to ensure that it
still works. The only known consumer of this interface was the engine
in OpenSSL < 1.1. Modern OpenSSL versions do not include support for
this interface as it was not well-documented.
Reviewed by: cem
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D29736
iscsid can be sleeping in iscsi_ioctl() causing the destroy_dev() to
sleep forever if iscsi.ko is unloaded while iscsid is running.
Reported by: Jithesh Arakkan @ Chelsio
Reviewed by: mav
MFC after: 1 week
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D29688
Use .o files directly. Replace the .o.uu files that we uudecode with .o files.
Adjust the kernel and module build to cope.
Suggestions by: markj@, emaste@
Sposnored by: Netflix, Inc
Differential Revision: https://reviews.freebsd.org/D29636
uudecode the .o.uu files and commit directly to the tree. Adjust the build
infrastructure to cope with the new location, both for the kernel and modules.
Sposnored by: Netflix, Inc
Differential Revision: https://reviews.freebsd.org/D29635
Store the .o files directly in the tree. We no longer need to play uuencode
games like we did in the CVS days. Adjust the build infrastructure to match.
Reviewed by: markj@
Sposnored by: Netflix, Inc
Differential Revision: https://reviews.freebsd.org/D29634
We no longer need to use uuencode to uuencode files in our tree. Store the .o
file directly instead. Adjust the build to cope with the new arrangement.
Suggestions by: emaste, bz, donner
Reviewed by: markm
Sposnored by: Netflix, Inc
Differential Revision: https://reviews.freebsd.org/D29632
When packet is a SYN packet, we don't need to modify any existing PCB.
Normally SYN arrives on a listening socket, we either create a syncache
entry or generate syncookie, but we don't modify anything with the
listening socket or associated PCB. Thus create a new PCB lookup
mode - rlock if listening. This removes the primary contention point
under SYN flood - the listening socket PCB.
Sidenote: when SYN arrives on a synchronized connection, we still
don't need write access to PCB to send a challenge ACK or just to
drop. There is only one exclusion - tcptw recycling. However,
existing entanglement of tcp_input + stacks doesn't allow to make
this change small. Consider this patch as first approach to the problem.
Reviewed by: rrs
Differential revision: https://reviews.freebsd.org/D29576
Allows for duplicate locks to be acquired without witness complaining.
Similar flags exists already for rwlock(9) and sx(9).
Reviewed by: markj
MFC after: 3 days
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
NetApp PR: 52
Differential Revision: https://reviews.freebsd.org/D29683n
types.h defines device_t as a typedef of struct device *. struct device
is defined in subr_bus.c and almost all of the kernel uses device_t.
The LinuxKPI also defines a struct device, so type confusion can occur.
This causes bugs and ambiguity for debugging tools. Rename the FreeBSD
struct device to struct _device.
Reviewed by: gbe (man pages)
Reviewed by: rpokala, imp, jhb
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29676
We were passing a LinuxKPI struct device * to a pci(4) function that
expects a device_t.
Reviewed by: manu, hselasky, bz
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29675
The driver needs to provide a LinuxKPI device structure to register
itself with the IB subsystem. It was erroneously using a copy of its
FreeBSD device structure for this purpose.
Use linux_pci_attach_device() instead, following the example of the
Chelsio iwarp driver. Also ensure that we don't leak the faked device
during detach.
Reviewed by: hselasky
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29595
Once a kif is passed to pfi_kkif_attach() we must ensure we never re-use
it for anything else.
Set the kif to NULL afterwards to guarantee this.
Reported-by: syzbot+be5d4f4a7a4c295e659a@syzkaller.appspotmail.com
MFC after: 4 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
It was used for testing armv6 under QEMU, however since then we added
support for the QEMU virt platform.
Reviewed by: imp, manu
Differential Revision: https://reviews.freebsd.org/D29707
This is intended to be used with memory mapped IO, e.g. from
bus_space_map with no flags, or pmap_mapdev.
Use this new memory type in the map request configured by
resource_init_map_request, and in pciconf.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D29692
The mbuf allocated could be a chain and must be freed with m_freem.
Reviewed by: jhb@
MFC after: 1 week
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D29579
Recent testing of network partitioning a FreeBSD NFSv4.1
server from a Linux NFSv4.1 client identified problems
with both the FreeBSD server and Linux client.
Sometimes, after some Linux NFSv4.1/4.2 clients establish
a new TCP connection, they will advance the sequence number
for a session slot by 2 instead of 1.
RFC5661 specifies that a server should reply
NFS4ERR_SEQ_MISORDERED for this case.
This might result in a system call error in the client and
seems to disable future use of the slot by the client.
Since advancing the sequence number by 2 seems harmless,
allow this case if vfs.nfs.linuxseqsesshack is non-zero.
Note that, if the order of RPCs is actually reversed,
a subsequent RPC with a smaller sequence number value
for the slot will be received. This will result in
a NFS4ERR_SEQ_MISORDERED reply.
This has not been observed during testing.
Setting vfs.nfs.linuxseqsesshack to 0 will provide
RFC5661 compliant behaviour.
This fix affects the fairly rare case where a NFSv4
Linux client does a TCP reconnect and then apparently
erroneously increments the sequence number for the
session slot twice during the reconnect cycle.
PR: 254816
MFC after: 2 weeks
That fixes disabled keyboard input after Xorg server has been stopped.
Reviewed by: whu
MFC after: 1 month
Differential revision: https://reviews.freebsd.org/D28171
Commit 7763814fc9c2 changed the internal KAPI between the krpc
and NFS. As such, the krpc, nfscommon and nfscl modules must
all be rebuilt from sources.
During a recent testing event, it was reported that the NFSv4.1/4.2
server erroneously bound the back channel to a new TCP connection.
RFC5661 specifies that the fore channel is implicitly bound to a
new TCP connection when an RPC with Sequence (almost any of them)
is done on it. For the back channel to be bound to the new TCP
connection, an explicit BindConnectionToSession must be done as
the first RPC on the new connection.
Since new TCP connections are created by the "reconnect" layer
(sys/rpc/clnt_rc.c) of the krpc, this patch adds an optional
upcall done by the krpc whenever a new connection is created.
The patch also adds the specific upcall function that does a
BindConnectionToSession and configures the krpc to call it
when required.
This is necessary for correct interoperability with NFSv4.1/NFSv4.2
servers when the nfscbd daemon is running.
If doing NFSv4.1/NFSv4.2 mounts without this patch, it is
recommended that the nfscbd daemon not be running and that
the "pnfs" mount option not be specified.
PR: 254840
Comments by: asomers
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D29475
Such type cannot be used in code that is in common between
FreeBSD and Linux. Use the FreeBSD type instead.
MFC after: 3 days
Reported by: markj
Differential Revision: https://reviews.freebsd.org/D29677
similarly to the Linux driver, by a tunable read only sysctl.
Submitted by: Oleg Sidorkin <osidorkin@gmail.com>
PR: 254884
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
This is my second pass, this time over all of CAM except
for the SCSI target bits. There should be no functional
changes.
Reviewed By: imp
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D29549
Recent testing of network partitioning a FreeBSD NFSv4.1
server from a Linux NFSv4.1 client identified problems
with both the FreeBSD server and Linux client.
Commit 05a39c2c1c18 fixed replying with the cached reply in
in the session slot if same session slot sequence#.
However, the code uses the reply and, as such,
will fail for a subsequent retry of the RPC.
A subsequent retry would be an extremely rare event,
but this patch fixes this, so long as m_copym(..M_NOWAIT)
does not fail, which should also be a rare event.
This fix affects the exceedingly rare case where a NFSv4
client retries a non-idempotent RPC, such as a lock
operation, multiple times. Note that retries only occur
after the client has needed to create a new TCP connection,
with a new TCP connection for each retry.
MFC after: 2 weeks
Slighly relax the gateway validation rules imposed by the
2fe5a79425c7, by requiring only first 8 bytes (everyhing
before sdl_data to be present in the AF_LINK gateway.
Reported by: olivier
inp_lookup_mcast_ifp() is static and is only used in the inp_join_group().
The latter function is also static, and is only used in the inp_setmoptions(),
which relies on inp being non-NULL.
As a result, in the current code, inp_lookup_mcast_ifp() is always called
with non-NULL inp. Eliminate unused RT_DEFAULT_FIB condition and always
use inp fib instead.
Differential Revision: https://reviews.freebsd.org/D29594
Reviewed by: kp
MFC after: 2 weeks
These functions no longer exist in the kernel, so there's no reason to
keep the prototypes in a kernel header. Move them to pfctl where they're
actually implemented.
Reviewed by: glebius
MFC after: 4 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D29643
This will make future extensions of the API much easier.
The intent is to remove support for DIOCADDRULE in FreeBSD 14.
Reviewed by: markj (previous version), glebius (previous version)
MFC after: 4 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D29557
instead of manually inlining it
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D29687
instead of manual zeroing of the debug registers file in pcb.
This centralizes the cleaning code, but the practical difference is
that PCB_DBREGS flag is cleared, saving some operations on context
switching.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D29687
