after the array to its proper location. Otherwise, the linker.hints
file has things out of order and we associated it with whatever was
the previous module.
In a virtual machine, VMCI is exposed as a regular PCI device. The primary
communication mechanisms supported are a point-to-point bidirectional
transport based on a pair of memory-mapped queues, and asynchronous
notifications in the form of datagrams and doorbells. These features are
available to kernel level components such as vSockets through the VMCI
kernel API. In addition to this, the VMCI kernel API provides support for
receiving events related to the state of the VMCI communication channels,
and the virtual machine itself.
Submitted by: Vishnu Dasa <vdasa@vmware.com>
Reviewed by: bcr, imp
Obtained from: VMware
Differential Revision: https://reviews.freebsd.org/D14289
DTB Overlays are useful to change/add nodes to a dtb without the need to
modify it.
Add support for building dtbo during buildkernel.
The goal of DTBO present in the FreeBSD source tree is to fill a gap in
time when we submit changes upstream (Linux). Instead of waiting 2 to 4 months
we can add a DTBO in tree in the meantime.
This is not for adding DTBO for capes/hat/addon boards, those will be
better to put in a ports.
This is also not for enabling a i2c/spi/pwm controller on certain pins,
each user have a different use case for those (which pins to use etc ...)
and we cannot have all possible configuration.
Add a dtbo for sun8i-h3-sid which add the SID node missing in upstream dts.
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D14782
Assert that all such memory is unwired on return to usermode.
The count of the wired memory will be used to detect the copyout mode.
Tested by: pho (as part of the larger patch)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
copyout(9) while owning zone lock.
Despite old value sysctl buffer is wired, spurious faults might still
occur.
Note that we still own the uma_rwlock there, but this lock does not
participate in sensitive lock orders.
Reported and tested by: pho (as part of the larger patch)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
currently on the queue. This prevents accidentally doubly-removing a DAD
entry from the queue, while also simplifying some of the logic in
nd6_dad_stop().
Reviewed by: ae, hrs, vangyzen
MFC after: 2 weeks
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D10943
Most important for the future use, do not call
vm_fault_quick_hold_pages() with disabled pagefaults.
Reported and tested by: pho (as part of the larger patch)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Current code, which copies the potential syscall arguments into the
current frame, puts an arbitrary limit on the number of syscall
arguments. Apparently, mmap(2) and lseek(2) (?) require larger
number. But there is an issue that stack is only need to be mapped to
contain the number of arguments required by the syscall, so copying
arbitrary large number of words from the stack is not completely safe.
Use different approach to convert lcall frame into int $0x80 frame in
place, by doing the retl in kernel. This also allows to stop proceed
vfork case specially, and stop making assumptions about %cs at the
syscall time.
Also, improve comments with the formulations provided by bde.
Reviewed and tested by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
controlled by the TCP_BLACKBOX option.
Enable this as part of amd64 GENERIC. For now, leave it disabled on
other platforms.
Sponsored by: Netflix, Inc.
This pertains exclusively to the set/restore functionality that we offer,
where any changes made by loader.conf previously will be effectively removed
upon reload of the configuration. We don't currently have a need to export
these, so don't bother.
Not all systems use efifb; pull hw.vga.textmode and choose a good console
mode instead if it's set to something non-zero. This is basically a revival
of the code that used to live in boot1, but instead rebased onto this
different way of doing mode selection in loader.efi.
Interestingly enough, the regression that was previously introduced where
GOP would not reflect the console setting does not seem to exist when
console mode selection is done here. I've not done any investigation as to
why this is the case. Nevertheless, boot1.efi is still not the best place to
do mode selection.
This fixes an avoidable EINVAL when the user tries to disable AN after
the port is initialized but l1cfg doesn't have a valid speed to use.
MFC after: 1 week
Sponsored by: Chelsio Communications
Originally KVM set %eax to 0 in the cpuid leaf 0x4000000 rather than
to the highest supported leaf in the hypervisor "branch". Detect this
case and fixup the %eax value so that the hypervisor is still
detected.
Reported by: jpaetzel
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D14810
Default the max resolution to 1080p, we'll accept Width x Height
specifications along with the following presets:
- 480p
- 720p
- 1080p
- 2160p or 4k
- 5k
PR: 224825
Differential Revision: https://reviews.freebsd.org/D14801
UEFI booting requires an EFI System Partition (ESP). On most storage devices
this will be in a specific partition type. To allow booting from CD/ISO
filesystems, UEFI will look for an ESP in the form of a FAT filesystem image
embedded in the image. Historically FreeBSD has added one of these to its
amd64 ISO images but marked it as simply another i386 boot image. Luckily for
us most UEFI implementations are rather forgiving and work this out for us.
This change adds the ability to mark a boot image as being a UEFI image. It
also modifies our ISO generation to use this marking for the UEFI image we
embed.
Reported by: Thomas Schmitt <scdbackup@gmx.net>
Reviewed by: emaste, imp
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D14809
error state.
If the device is in internal error state the hardware will not
generate completions. Just move on to destroy the resources.
Submitted by: slavash@
MFC after: 1 week
Sponsored by: Mellanox Technologies
Change page cleanup flow when in internal error to properly decrement
the page counts when reclaiming pages. That prevents timing out
waiting for extra pages that were actually cleaned up previously.
Submitted by: slavash@
MFC after: 1 week
Sponsored by: Mellanox Technologies
When a PCI error is detected the PCI state could be corrupt, don't
save it in that flow. Save the state after initialization. After
restoring the PCI state during slot reset save it again, restoring
the state destroys the previously saved state info.
Submitted by: slavash@
MFC after: 1 week
Sponsored by: Mellanox Technologies
Since the FW can be shared between PCI functions it is common that
more than one health poll will detected a failure, this can lead to
multiple resets.
The solution is to use a FW locking mechanism using semaphore space to
provide a way to synchronize between functions. The FW semaphore is
acquired via config cycle access. First the VSEC gateway must be
acquired, then the semaphore can be locked by writing a value to it
and confirmed it's locked by reading the same value back. The process
in the same to free the semaphore, except the value written should be
zero.
Submitted by: slavash@
MFC after: 1 week
Sponsored by: Mellanox Technologies
If a FW assert is considered fatal, indicated by a new bit in the
health buffer, reset the FW. After the reset, follow the normal
recovery flow.
Submitted by: slavash@
MFC after: 1 week
Sponsored by: Mellanox Technologies
Some mlx5 adapter firmware allows the driver to reset the firmware in
the event of an error. When a software reset is issued on any physical
function all PFs enter reset state. This is a recoverable condition.
The existing recovery flow was designed to allow the recovery of a
VF after a PF driver reload. This patch expands the scope of that
flow to recover PFs or VFs after a SW reset has been issued.
When a software reset is issued the following occurs:
1. The NIC interface mode is set to SW_RESET (7) while the reset is in
progress.
2. Once the reset completes the NIC interface mode is set to NIC
disabled (1).
After the reset has been issued (added in a subsequent patch) the
health poll for other functions will detect that the NIC interface
state has been set to disabled. This will cause it to enter the
existing recovery flow. If the PCI is still working (meaning it
doesn't return 0xff on all reads) it means recovery can proceed
immediately instead of waiting 60 seconds.
The error detetion has also been refactored to avoid incorrect or
misleading log messages.
Submitted by: slavash@
MFC after: 1 week
Sponsored by: Mellanox Technologies
When mlx5_enter_error_state() operation is forced by shutdown, the
messages surrounding setting the error state are not informational
and confuse users.
Submitted by: kib@
MFC after: 1 week
Sponsored by: Mellanox Technologies
This patch accumulates the following Linux commits:
- 8812c24d28f4972c4f2b9998bf30b1f2a1b62adf
net/mlx5: Add fast unload support in shutdown flow
- 59211bd3b6329c3e5f4a90ac3d7f87ffa7867073
net/mlx5: Split the load/unload flow into hardware and software flows
- 4525abeaae54560254a1bb8970b3d4c225d32ef4
net/mlx5: Expose command polling interface
Submitted by: Matthew Finlay <matt@mellanox.com>
MFC after: 1 week
Sponsored by: Mellanox Technologies
This patch accumulates the following Linux commits:
- 04c0c1ab38e95105d950db5b84e727637e149ce7
net/mlx5: PCI error recovery health care simulation
- 0179720d6be2096b8d0a4d143254ff9e77747daa
net/mlx5: Introduce trigger_health_work function
- 3fece5d676939f42f434c63dfe1bd42d7d94e6f0
net/mlx5: Continue health polling until it is explicitly stopped
Submitted by: Matthew Finlay <matt@mellanox.com>
MFC after: 1 week
Sponsored by: Mellanox Technologies
Bring #includes closer to style(9) and reduce differences between the
(three) MD versions of linux_machdep.c and linux_sysvec.c.
Sponsored by: Turing Robotic Industries Inc.
