RISC-V is a new ISA designed to support computer research and education, and
is now become a standard open architecture for industry implementations.
This is a minimal set of changes required to run 'make kernel-toolchain'
using external (GNU) toolchain.
The FreeBSD/RISC-V project home: https://wiki.freebsd.org/riscv.
Reviewed by: andrew, bdrewery, emaste, imp
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
Differential Revision: https://reviews.freebsd.org/D4445
This both avoids some dependencies on xinstall.host and allows
bootstrapping on older releases to work due to lack of at least 'install -l'
support.
Sponsored by: EMC / Isilon Storage Division
netbsd-tests.test.mk (r289151)
- Eliminate explicit OBJTOP/SRCTOP setting
- Convert all ad hoc NetBSD test integration over to netbsd-tests.test.mk
- Remove unnecessary TESTSDIR setting
- Use SRCTOP where possible for clarity
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Divison
calling thread is supposed to see accesses issued by the initializer.
This means that the read of the once_control->state variable should
have an acquire semantic. Use atomic_thread_fence_acq() when the
value read is ONCE_DONE, instead of straightforward atomic_load_acq(),
to only put a barrier when needed (*).
On the other hand, the updates of the once_control->state with the
intermediate progress state do not need to synchronize with other
state accesses, remove _acq suffix.
Reviewed by: alc (previous version)
Suggested by: alc (*)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
avoids recursion into rtld when leaving libthr critical section for
the deferred signal delivery.
For the same reason, use syscall(2) instead of referencing
__sys_sigreturn(2). Syscall() is already pre-resolved for fork()
interceptor.
Tested by: Andre Meiser <ortadur@web.de>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Clang emits SSE instructions on amd64 in the common path of
pthread_mutex_unlock. If the thread does not otherwise use SSE,
this usage incurs a context-switch of the FPU/SSE state, which
reduces the performance of multiple real-world applications by a
non-trivial amount (3-5% in one application).
Instead of this change, I experimented with eagerly switching the
FPU state at context-switch time. This did not help. Most of the
cost seems to be in the read/write of memory--as kib@ stated--and
not in the #NM handling. I tested on machines with and without
XSAVEOPT.
One counter-argument to this change is that most applications already
use SIMD, and the number of applications and amount of SIMD usage
are only increasing. This is absolutely true. I agree that--in
general and in principle--this change is in the wrong direction.
However, there are applications that do not use enough SSE to offset
the extra context-switch cost. SSE does not provide a clear benefit
in the current libthr code with the current compiler, but it does
provide a clear loss in some cases. Therefore, disabling SSE in
libthr is a non-loss for most, and a gain for some.
I refrained from disabling SSE in libc--as was suggested--because
I can't make the above argument for libc. It provides a wide variety
of code; each case should be analyzed separately.
https://lists.freebsd.org/pipermail/freebsd-current/2015-March/055193.html
Suggestions from: dim, jmg, rpaulo
Approved by: kib (mentor)
MFC after: 2 weeks
Sponsored by: Dell Inc.
Since METAMODE has been added, sys.mk loads bsd.mkopt.mk which ends load loading
bsd.own.mk which then defines SHLIBDIR before all the Makefile.inc everywhere.
This makes /lib being populated again.
Reported by: many
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796
Reviewed by: brooks imp
to handle per-thread information. Since our pthread_setspecific()
implementation calls calloc(3) to allocate per-thread specific data
storage, things get complicated.
Switch the allocator to use bare mmap(2). There is some loss of the
allocated page, since e.g. on amd64, PTHREAD_KEYS_MAX * sizeof(struct
pthread_specific_elem) is 3K (it actually spans whole page due to
padding), but I believe it is more acceptable than additional code for
specialized allocator().
The alternatives would either to make the specific data array be part of
the struct thread, or use internal bindings to call the libc malloc,
avoiding interposing.
Also do the style pass over the thr_spec.c, esp. simplify the
conditionals nesting by returning early when an error detected.
Remove trivial comments.
Found by: yuri@rawbw.com
PR: 200138
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
pwrite(2) syscalls are wrapped to provide compatibility with pre-7.x
kernels which required padding before the off_t parameter. The
fcntl(2) contains compatibility code to handle kernels before the
struct flock was changed during the 8.x CURRENT development. The
shims were reasonable to allow easier revert to the older kernel at
that time.
Now, two or three major releases later, shims do not serve any
purpose. Such old kernels cannot handle current libc, so revert the
compatibility code.
Make padded syscalls support conditional under the COMPAT6 config
option. For COMPAT32, the syscalls were under COMPAT6 already.
Remove WITHOUT_SYSCALL_COMPAT build option, which only purpose was to
(partially) disable the removed shims.
Reviewed by: jhb, imp (previous versions)
Discussed with: peter
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
waitid() function is required to be cancellable by the standard. The
wait6() and ppoll() follow the other syscalls in their groups.
Reviewed by: jhb, jilles (previous versions)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Note that to cancel blocked kevent(2) call, changelist must be empty,
since we cannot cancel a call which already made changes to the
process state. And in reverse, call which only makes changes to the
kqueue state, without waiting for an event, is not cancellable. This
makes a natural usage model to migrate kqueue loop to support
cancellation, where existing single kevent(2) call must be split into
two: first uncancellable update of kqueue, then cancellable wait for
events.
Note that this is ABI-incompatible change, but it is believed that
there is no cancel-safe code that relies on kevent(2) not being a
cancellation point. Option to preserve the ABI would be to keep
kevent(2) as is, but add new call with flags to specify cancellation
behaviour, which only value seems to add complications.
Suggested and reviewed by: jilles
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
only adds support for kernel-toolchain, however it is expected further
changes to add kernel and userland support will be committed as they are
reviewed.
As our copy of binutils is too old the devel/aarch64-binutils port needs
to be installed to pull in a linker.
To build either TARGET needs to be set to arm64, or TARGET_ARCH set to
aarch64. The latter is set so uname -p will return aarch64 as existing
third party software expects this.
Differential Revision: https://reviews.freebsd.org/D2005
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Errors from _thr_umutex_unlock2 should "never happen" in normal
circumstances. If they do, however, return them to the application
so it can fail early and loudly. Hiding the errors will only delay
the inevitable failure, making it harder to find and diagnose.
Submitted by: Eric van Gyzen <eric_van_gyzen@dell.com>
Obtained from: Dell Inc.
PR: 198914
MFC after: 1 week
particular, stdio locking was affected.
Reported and tested by: "Matthew D. Fuller" <fullermd@over-yonder.net>
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
b_destroying member was left uninitialized, which caused spurious
EBUSY.
PR: 197365
Noted by: Florent Guiliani <fguiliani@verisign.com>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The amd64, i386, and sparc64 versions were identical, with the one
difference where the former two used inline asm instead of _tcb_get. I
have compared the function before and after replacing the asm with _tcb_get
and found the object files to be identical.
The arm, mips, and powerpc versions were almost identical. The only
difference was the powerpc version used an alignment of 1 where arm and
mips used 16. As this is an increase in alignment is will be safe.
Along with this arm, mips, and powerpc all passed, when initial was true,
the value returned from _tcb_get as the first argument to
_rtld_allocate_tls. This would then return this pointer back to the caller.
We can remove these extra calls by checking if initial is set and setting
the thread control block directly. As this is what the sparc64 code does
we can use it directly.
As after these observations all the architectures can now have identical
code we can merge them into a common file.
Differential Revision: https://reviews.freebsd.org/D1556
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
cancellation-handling code in the libthr. Translate some syscalls
into their more generic counterpart, and remove translated syscalls
from the table.
List of the affected syscalls:
creat, open -> openat
raise -> thr_kill
sleep, usleep -> nanosleep
pause -> sigsuspend
wait, wait3, waitpid -> wait4
Suggested and reviewed by: jilles (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
though GOT, by staticizing and hiding. Add setter for
__error_selector to hide it as well.
Suggested and reviewed by: jilles
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
(or loading a dso linked to libthr.so into process which was not
linked against threading library).
- Remove libthr interposers of the libc functions, including
__error(). Instead, functions calls are indirected through the
interposing table, similar to how pthread stubs in libc are already
done. Libc by default points either to syscall trampolines or to
existing libc implementations. On libthr load, libthr rewrites the
pointers to the cancellable implementations already in libthr. The
interposition table is separate from pthreads stubs indirection
table to not pull pthreads stubs into static binaries.
- Postpone the malloc(3) internal mutexes initialization until libthr
is loaded. This avoids recursion between calloc(3) and static
pthread_mutex_t initialization.
- Reinstall signal handlers with wrapper on libthr load. The
_rtld_is_dlopened(3) is used to avoid useless calls to sigaction(2)
when libthr is statically referenced from the main binary.
In the process, fix openat(2), swapcontext(2) and setcontext(2)
interposing. The libc symbols were exported at different versions
than libthr interposers. Export both libc and libthr versions from
libc now, with default set to the higher version from libthr.
Remove unused and disconnected swapcontext(3) userspace implementation
from libc/gen.
No objections from: deischen
Tested by: pho, antoine (exp-run) (previous versions)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
It is automatically set when -fPIC is passed to the compiler.
Reviewed by: dim, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D1179
lib/libthr/tests
A variant of this code has been tested on amd64/i386 for some time by
EMC/Isilon on 10-STABLE/11-CURRENT. It builds on other architectures, but the
code will remain off until it's proven it works on virtual hardware or real
hardware on other architectures
Original work by: pho
Sponsored by: EMC / Isilon Storage Division
and explain some internal working of the library, neccessary to
understand the knobs effects.
Reviewed by: bjk, pluknet
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
stack into the stacks of the created threads. Add knob
LIBPTHREAD_SPLITSTACK_MAIN to restore the older behaviour.
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
the whole RLIMIT_STACK-sized region of the kernel-allocated stack as
the stack of main thread.
By default, the main thread stack is clamped at 2MB (4MB on 64bit
ABIs) and the rest is used for other threads stack allocation. Since
there is no programmatic way to adjust the size of the main thread
stack, pthread_attr_setstacksize() is too late, the knob allows user
to manage the main stack size both for single-threaded and
multi-threaded processes with the rlimit.
Reported by: "Ivan A. Kosarev" <ivan@ivan-labs.com>
Tested by: dim
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
This includes:
o All directories named *ia64*
o All files named *ia64*
o All ia64-specific code guarded by __ia64__
o All ia64-specific makefile logic
o Mention of ia64 in comments and documentation
This excludes:
o Everything under contrib/
o Everything under crypto/
o sys/xen/interface
o sys/sys/elf_common.h
Discussed at: BSDcan
