iflib is already a module, but it is unconditionally compiled into the
kernel. There are drivers which do not need iflib(4), and there are
situations where somebody might not want iflib in kernel because of
using the corresponding driver as module.
Reviewed by: marius
Discussed with: erj
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D19041
Rather than mentioning the requirement for 4.x binaries but not
explaining why (it was assuming an upgrade from 4.x to 5.0-current),
explain when compat options are needed (for running existing host
binaries) in a more general way while using a more modern example
(COMPAT_FREEBSD11 for 11.x binaries). While here, explicitly mention
that a GENERIC kernel should always work.
Reported by: Robert Huff <roberthuff@rcn.com>
Reviewed by: imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18740
The first part of the mips pruning has been commited. This part
is uncontested. Fix the date in the UPDATING file to reflect when
I made the commit. The contested parts will be committed (or not)
once those discussions complete.
This was useful in bring up. However, it causes more issues than the
support is worth (64-bit atomics being chief among them).
Discussed on: freebsd-mips@
Differential Revision: https://reviews.freebsd.org/D18543
relevant and is unused. It's also getting in the way of progress in
some admittedly minor ways. Better to retire it to reduce the burden
on the project.
Discussed on: freebsd-mips@
Differential Revision: https://reviews.freebsd.org/D18543
It has passed an exp run on amd64 and i386, and has testing on arm64. On
other architectures it is expected to run, however it can be disabled by
building world with -DWITHOUT_BSD_CRTBEGIN.
Sponsored by: DARPA, AFRL
- Adding a note to UPDATING
- Adding a note to the history section of the manpage ctm.1
- Adding a message printed to STDERR to the ctm program
This version is meant for release in FreeBSD-12.0 and should remain in
FreeBSD-12 over its life-time.
A follow-up commit will remove ctm from -CURRENT after the MFC to 12
has happened.
Approved by: imp, rgrimes, bcr (man-page)
MFC after: 3 days
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D17969
Update messaging for which drm module to install. Add guidance on what
hardware is supported (which should be copied into the release
notes). Note: the in tree drivers are abandonware. There has been no
organized support for them for many years, and the plan is to still
remove them for all but arm once the transition to drm-*kmod is
complete. Also note that WITHOUT_MODULE_DRM and WITHOUT_MODULE_DRM2
should generally be added to src.conf for anybody using the drm-*kmod
ports. That will become default in 13 soon, however.
Approved by: FreeBSD Graphics Team
Relnotes: Yes
MFC After: 3 days
Differential Revision: https://reviews.freebsd.org/D17451
- Update OpenSSL to version 1.1.1.
- Update Kerberos/Heimdal API for OpenSSL 1.1.1 compatibility.
- Bump __FreeBSD_version.
Approved by: re (kib)
Sponsored by: The FreeBSD Foundation
This is a step in the process of easing migration into the new world order
of DRM drivers. Strongly encourage users towards loading DRM modules via
rc.conf(5) instead of loader.conf(5) by failing the load from loader(8).
Users so inclined may wipe out the blacklist via module_blacklist="" in
loader.conf(5), and it is expected that these modules will eventually be
removed from the blacklist. They may still be loaded as dependencies of
other modules or explicitly via the loader prompt, but this should not be a
major problem.
Approved by: re (rgrimes)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D16914
The workaround described in the 20180530 entry is no longer required.
Amend that entry and add a new 20180530 entry noting lld is the
default amd64 linker.
Reviewed by: imp
Approved by: re (kib)
notices the missing ntpd user and refers to UPDATING. This change makes
it more clear which aspect of UPDATING is important for the ntpd change.
PR: 231334
Approved by: re (gjb)
given in random(4).
This includes updating of the relevant man pages, and no-longer-used
harvesting parameters.
Ensure that the pseudo-unit-test still does something useful, now also
with the "other" algorithm instead of Yarrow.
PR: 230870
Reviewed by: cem
Approved by: so(delphij,gtetlow)
Approved by: re(marius)
Differential Revision: https://reviews.freebsd.org/D16898
Revert r338177, r338176, r338175, r338174, r338172
After long consultations with re@, core members and mmacy, revert
these changes. Followup changes will be made to mark them as
deprecated and prent a message about where to find the up-to-date
driver. Followup commits will be made to make this clear in the
installer. Followup commits to reduce POLA in ways we're still
exploring.
It's anticipated that after the freeze, this will be removed in
13-current (with the residual of the drm2 code copied to
sys/arm/dev/drm2 for the TEGRA port's use w/o the intel or
radeon drivers).
Due to the impending freeze, there was no formal core vote for
this. I've been talking to different core members all day, as well as
Matt Macey and Glen Barber. Nobody is completely happy, all are
grudgingly going along with this. Work is in progress to mitigate
the negative effects as much as possible.
Requested by: re@ (gjb, rgrimes)
As discussed on the MLs drm2 conflicts with the ports' version and there
is no upstream for most if not all of drm. Both have been merged in to
a single port.
Users on powerpc, 32-bit hardware, or with GPUs predating Radeon
and i915 will need to install the graphics/drm-legacy-kmod. All
other users should be able to use one of the LinuxKPI-based ports:
graphics/drm-stable-kmod, graphics/drm-next-kmod, graphics/drm-devel-kmod.
MFC: never
Approved by: core@
Turns out there was a hidden dependency we hasn't counted upon. The
host load /boot/userboot.so to boot the VMs it runs. This means that
the change to lua meant suddently that nobody could run their older
VMs because LUA wasn't in 10.0, last month's HardenedBSD, 11.2 or
whatever. Even more than for the /boot/loader* binaries, we need a
good coexistance strategy for this. While that's being designed and
implemented, drop back to always 4th for userboot.so. This will fail
safe in all but the most extreme environments (but lua-only hacks
to .lua files won't be processes in VMs until we fix it).
Differential Review: https://reviews.freebsd.org/D16805
After years in the making, lualoader is ready to make its debut. Both
flavors of loader are still built by default, and may be installed as
/boot/loader or /boot/loader.efi as appropriate either by manually creating
hard links or using LOADER_DEFAULT_INTERP as documented in build(7).
Discussed with: imp
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D16795
--color may be set to one of: 'auto', 'always', and 'never'.
'auto' is the default behavior- output colors only if -G or COLORTERM are
set, and only if stdout is a tty.
'always' is a new behavior- output colors always. termcap(5) will be
consulted unless TERM is unset or not a recognized terminal, in which case
ls(1) will fall back to explicitly outputting ANSI escape sequences.
'never' to turn off any environment variable and -G usage.
Reviewed by: cem, 0mp (both modulo last-minute manpage changes
Differential Revision: https://reviews.freebsd.org/D16741
The jedec_ts(4) driver has been marked as deprecated in stable/11, and is
now being removed from -HEAD. Add a notice in UPDATING, and update the few
remaining references (regarding jedec_dimm(4)'s compatibility and history)
to reflect the fact that jedec_ts(4) is now deleted.
Reviewed by: avg
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D16537
The latter matches the rest of the tree better [0]. The UPDATING entry has
been updated to reflect this, and the new tunable is now documented in
loader(8) [1].
Reported by: imp [0], Shawn Webb [1]
As noted in UDPATING, the new loader tunable efi.rt_disabled may be used to
disable EFIRT at runtime. It should have no effect if you are not booted via
UEFI boot.
MFC after: 6 weeks
loading.
If we are booting in a conforming UEFI Boot Manager Environment, then
use the BootCurrent variable to find the BootXXXX we're using. Once we
find that, then if it contains more than one EFI_DEVICE_PATH in its
what to boot section, try to use the last one as the kernel to
load. This will also set the default root partition as well. If
there's only one path, or if there's an error along the way, assume
that nothing specific was specified and revert to the old
algorithm. If something was specified, but not found, then fail the
boot. Otherwise you that, specific thing. On FreeBSD, this can be set
using efibootmgr -l <loader> -k <kernel>. We try a few variations of
kernel to cope with the fact that UEFI comes from a DOS world where
paths might be upper case and/or contain back-slashes.
Note: In an ideal world, we'd work out where we are in chain loading
by looking at the passed-in image handle and doing name
matching. However, that's unreliable since at least boot1.efi booted
images don't have that, hence the assumption that loader.efi needs to
load the last thing on the list, if possible.
The reason we fail for something specific is so that we can fully
participate in the UEFI Boot Manager Protocol and fail over to the
next item in the list of BootOrder choices when something goes wrong
at this stage.
This implements was was talked about in freebsd-arch@ last year
https://docs.freebsd.org/cgi/getmsg.cgi?fetch=3576+0+archive/2017/freebsd-arch/20171022.freebsd-arch
and documented in full (after changed resulting from the discussion) in
https://docs.google.com/document/d/1aK9IqF-60JPEbUeSAUAkYjF2W_8EnmczFs6RqCT90Jg/edit#
although one or two minor details may have been modified in this
implementation to make it work, and the ZFS MEDIA PATH extension isn't
implemented. This does not yet move things to ESP:\efi\freebsd\loader.efi.
RelNotes: Yes
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D16403
zfsloader as a hard link. While newer ones do, the whole point of the
link was to transition to the new world order smoothly. A hard link is
less flexible, but it works and will result in fewer bumps. Adjust
UPDATING entry to match.
This variable has been given the name "loader_env.disabled" as it's the
primary way most people will have an MD environment. This restores the
previously-default behavior of ignoring the loader(8) environment, which may
be useful for vendor distributions or other scenarios where inheriting the
loader environment may be considered a security issue or potentially
breaking of a more locked-down environment.
As the change to config(5) indicates, disabling the loader environment
should not be a choice made lightly since it may provide ACPI hints and
other useful things that the system can rely on to boot.
An UPDATING entry has been added to mention an upgrade path for those that
may have relied on the previous behavior.
Discussed with: bde
Relnotes: yes (maybe)
Replace size_t members with ksize_t (uint64_t) and pointer members
(never used as pointers in userspace, but instead as unique
idenitifiers) with kvaddr_t (uint64_t). This makes the structs
identical between 32-bit and 64-bit ABIs.
On 64-bit bit systems, the ABI is maintained. On 32-bit systems,
this is an ABI breaking change. The ABI of most of these structs
was previously broken in r315662. This also imposes a small API
change on userspace consumers who must handle kernel pointers
becoming virtual addresses.
PR: 228301 (exp-run by antoine)
Reviewed by: jtl, kib, rwatson (various versions)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15386
- inline atomics in modules on i386 and amd64 (they were always
inline on other arches)
- allow modules to opt in to inlining locks by specifying
MODULE_TIED=1 in the makefile
Reviewed by: kib
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D16079
The '%I' format in the kern.corefile sysctl limits the number of
core files that a process can generate to the number stored in the
debug.ncores sysctl. The '%I' format is replaced by the single digit
index. Previously, if all indexes were taken the kernel would overwrite
only a core file with the highest index in a filename.
Currently the system will create a new core file if there is a free
index or if all slots are taken it will overwrite the oldest one.
Reviewed by: kib(code), bcr (updating)
Differential Revision: https://reviews.freebsd.org/D15991
Differential Revision: https://reviews.freebsd.org/D16084
The size limits came from a flawed understanding of dump records.
The real issue was that dump was bogusly interpreting c_count
sometimes. r334978 fixes that.
This driver was merged to HEAD one week prior to Exar publicly announcing they
had left the Ethernet market. It is not known to be used and has various code
quality issues spotted by Brooks and Hiren. Retire it in preparation for
FreeBSD 12.0.
Submitted by: kbowling
Reviewed by: brooks imp
Relnotes: yes
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15442
zones. This does not affect the vast majority of users who do not care about
(or even know about) the tm_isdst flag but may be slightly surprising to those
with a more specialised interest in time zone arcana.
MFC after: 3 days
This driver was for an early and uncommon legacy PCI 10GbE for a single
ASIC, Intel 82597EX. Intel quickly shifted to the long lived ixgbe family.
Submitted by: kbowling
Reviewed by: brooks imp jeffrey.e.pieper@intel.com
Relnotes: yes
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15234
This driver supports legacy, 32-bit PCI devices, and had an ambiguous
license. Supported devices were already reported to be rare in 2003
(when an earlier version of the driver was removed in r123201).
Reviewed by: rgrimes
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15245
While Arcnet has some continued deployment in industrial controls, the
lack of drivers for any of the PCI, USB, or PCIe NICs on the market
suggests such users aren't running FreeBSD.
Evidence in the PR database suggests that the cm(4) driver (our sole
Arcnet NIC) was broken in 5.0 and has not worked since.
PR: 182297
Reviewed by: jhibbits, vangyzen
Relnotes: yes
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15057
Defines in net/if_media.h remain in case code copied from ifconfig is in
use elsewere (supporting non-existant media type is harmless).
Reviewed by: kib, jhb
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15017
With r332099 changing syslogd(8) to parse RFC 5424 formatted syslog
messages, go ahead and also change the syslog(3) libc function to
generate them. Compared to RFC 3164, RFC 5424 has various advantages,
such as sub-second precision for log entry timestamps.
As this change could have adverse effects when not updating syslogd(8)
or using a different system logging daemon, add a notice to UPDATING and
increase __FreeBSD_version.
Differential Revision: https://reviews.freebsd.org/D14926
If you're building -CURRENT releases and it fails when building ISO images on
amd64 you'll need to update makefs.
Reported by: dch
Sponsored by: iXsystems, Inc.
These problems have only been observed with boards using U-Boot (e.g. ARM)
where virtual addresses are already set in the memory map by the firmware
and the firmware is expecting a call to SetVirtualAddressMap to be made.
I refrain from mentioning this in the note because this could also be the
case on some not-yet-tested firmware on amd64 and it's not a bad
recommendation for the general case.
liblua glues the lua run time into the boot loader. It implements all
the runtime routines that lua expects. In addition, it has a few
standard 'C' headers that nueter various aspects of the LUA build that
are too specific to lua to be in libsa. Many refinements from the
original code to improve implementation and the number of included lua
libraries. Use int64_t for lua_Number. Have "/boot/lua" be the default
module path. Numerous cleanups from the original GSoC project,
including hacking libsa to allow lua to be built with only one change
outside luaconf.h.
Add the final bit of lua glue to bring in liblua and plug into the
multiple interpreter framework, previously committed.
Add LOADER_LUA option, currently off by default.
Presently, this is an experimental option. One must opt-in to using
this by defining WITH_LOADER_LUA and WITHOUT_FORTH. It's been
lightly tested, so keep a backup copy of your old loader handy.
The menu code, coming in the next commit, hasn't been exhaustively
tested. A LUA boot loader is 60k larger than a FORTH one, which is
80k larger than a no-interpreter one. Subtle changes in size
may tip things past some subtle limit (the binary is ~430k now
when built with LUA). A future version may offer coexistance.
Bump FreeBSD version to 1200058 to mark the milestone.
Pedro Souza's 2014 Summer of Code project. Rui Paulo, Pedro Arthur,
Zakary Nafziger and Wojciech A. Koszek also contributed. Warner Losh
reworked it extensively into its current form.
Obtained from: https://wiki.freebsd.org/SummerOfCode2014/LuaLoader
Sponsored by: Google Summer of Code
Relnotes: Yes
MFC After: 1 month
Differential Review: https://reviews.freebsd.org/D14295
6.0.0 (branches/release_60 r321788). Upstream has branched for the
6.0.0 release, which should be in about 6 weeks. Please report bugs and
regressions, so we can get them into the release.
Please note that from 3.5.0 onwards, clang, llvm and lldb require C++11
support to build; see UPDATING for more information.
MFC after: 3 months
Disabled the use of RSS hash from the network card aka flowid for
lagg(4) interfaces by default as it's currently incompatible with
the lacp and loadbalance protocols.
The incompatibility is due to the fact that the flowid isn't know
for the first packet of a new outbound stream which can result in
the hash calculation method changing and hence a stream being
incorrectly split across multiple interfaces during normal
operation.
This can be re-enabled by setting the following in loader.conf:
net.link.lagg.default_use_flowid="1"
Discussed with: kmacy
Sponsored by: Multiplay
temporary workaround. This fixes zfs booting generally, but breaks all
GELI booting by default. Add note to UPDATING to this effect. When the
GELI issues are resolved, this will be reverted.
PowerPC kernels in r6 is actually metadata from loader(8) or gibberish
left in r6, which is not required to be anything under the
PAPR/ePAPR/CHRP/OF standards, by another boot loader.
Note that, as a result, systems need a new boot loader to boot PPC kernels
after this revision without ending up at a mountroot prompt. New boot
loaders are backwards compatible and can boot older kernels.
Reviewed by: jhibbits
MFC after: 2 months
Transition to WITH/WITHOUT_LOADER_GELI to flag support or not of GELI
in the boot loaders. Add HAVE_GELI so components can flag they need
support (since it's too large to include everywhere). Add temporary
warnings for the old forms to ease transition.
Also, update test script to build without GELI on x86.
Sponsored by: Netflix
Rename LOADER_FIREWIRE_SUPPORT to MK_LOADER_FIREWIRE. Only build
libfirewire when this is "yes". Add note to updating. Fix build script
to build this for x86 so the option doesn't decay. sparc64 supports
ZFS, so also build it MK_ZFS=no.
Sponsored by: Netflix
This can be disabled by putting WITHOUT_AUTO_OBJ=yes in /etc/src-env.conf, not
/etc/src.conf, or passing it in the environment.
The purpose of this rather than simply flipping the default of AUTO_OBJ to yes
is to avoid hassling users with auto.obj.mk failures if the wanted OBJDIR is
not writable. It will fallback to writing to the source directory like it does
today if MAKEOBJDIRPREFIX is not writable.
The act of enabling MK_AUTO_OBJ disables all 'make obj' treewalks since
previous work has made those not run if MK_AUTO_OBJ==yes in Makefile.inc1.
Relnotes: yes
Reviewed by: sjg
Discussed at: https://lists.freebsd.org/pipermail/freebsd-arch/2016-May/017805.html
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12841
This changes the build OBJDIR from the older style of /usr/obj/<srcdir> for
native builds, and /usr/obj/<target>.<target_arch>/<srcdir> for cross builds to
a new simpler format of /usr/obj/<srcdir>/<target>.<target_arch>. This
new format is used regardless of cross or native build. It allows
easier management of multiple source tree object directories.
The UNIFIED_OBJDIR option will be removed and its feature made permanent
for the 12.0 release.
Relnotes: yes (don't note UNIFIED_OBJDIR option since it will be removed)
Prior work: D3711 D874
Reviewed by: gjb, sjg
Discussed at: https://lists.freebsd.org/pipermail/freebsd-arch/2016-May/017805.html
Discussed with: emaste
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12840
- Remove FreeBSD 4.x of building the kernel.
While it might technically work, it is better to
document the 'correct' way than how to shoot oneself
in the foot
- Remove reference to CVS -P for src.
Without this the user has to mess with 'make -f Makefile.inc1 ...' to figure
out where the files are installed in the OBJDIR and then they need to copy them
to where they really wanted them. Using DESTDIR may be problematic after
r325001 as well.
The files will be installed to DESTDIR/NXTP where NXTP defaults to /nxb-bin.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
files will produce an error and buildkernel will fail. Previously missing
KERNCONF files silently failed giving no indication as to why, only to
subsequently discover during installkernel that the desired kernel was
never built in the first place.
This is a rework of r302865.
This is the correct patch.
Reviewed by: ngie (previous version, r302865)
MFC after: 2 months
Differential Revision: D7167
files will produce an error and buildkernel will fail. Previously missing
KERNCONF files silently failed giving no indication as to why, only to
subsequently discover during installkernel that the desired kernel was
never built in the first place.
This is a rework of r302865.
Reviewed by: ngie (previous version, r302865)
MFC after: 2 months
Differential Revision: D7167
It's awkward to have spaces in CAM device serial numbers. That leads to
such things as device nodes named "/dev/diskid/MYSERIAL%20%20%201". Better
to replace the spaces with "0"s. This change only affects the default
serial numbers for users who don't provide their own.
Reviewed by: ken, mav
MFC after: Never
Relnotes: Yes
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D12263
On hard-float 32-bit arm platforms, always search for the soft float
binaries in the alternative locations.
Sponsored by: Netflix
Differential Review: https://reviews.freebsd.org/D12274
MFC After: 1 week
of fsck to automatically find alternate superblocks when the
standard one is trashed or unavailable.
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D11589
AKA Make time_t 64 bits on powerpc(32).
PowerPC currently (until now) was one of two architectures with a 32-bit time_t
on 32-bit archs (the other being i386). This is an ABI breakage, so all ports,
and all local binaries, *must* be recompiled.
Tested by: andreast, others
MFC after: Never
Relnotes: Yes
Our current approach to dependency tracking cannot cope with switching
generated asm syscall stubs into C wrappers. Perpetuate the hack in
Makefile.inc1 to paper over the problem until we can take a holistic
approach to fixing dependency problems.
Differential Revision: https://reviews.freebsd.org/D11344
Add forward compatibility so that new binaries can run on old
kernels. If the new system call from ino64 isn't available on your
system, then the old one will be used and the results translated. The
stat and statfs families of functions are fully emulated. While not
required by policy, in this case it is helpful to our users to provide
this compatibility. In this case, it allows rollback of the kernel
after installing a new userland should a problem be discovered. It
also prevents foot-shooting if a user does an install before rebooting
with the new kernel. Finally, it allows the use case where one needs
to run new binaries on an old kernel as part of an upgrade process.
The getdirentries family uses tricks that may not work on remote
filesystems. Specifically, it uses a buffer 1/4 the size requested to
get the data from he old syscall.
The code carefully uses direct syscalls for old system calls to avoid
referencing freebsd11_* symbols, which contaminate ld-elf.so.1's
export table due to its use of stat functions, which causes errno to
be incorrect in client programs due to the wrong *stat* function being
resolved in some cases.
This code should removed sometime after 12 is branched.
Tested on: 12-current binaries on a 10.3-beta kernel run and return
consistent results. 12-current kernel and userland with
packages from before ino64 was committed also work.
Differential Revision: https://reviews.freebsd.org/D11185
Reviewed by: kib@, emaste@
The BSDL dtc has grown the needed features (overlays mostly) and is able to
compile all of our base DTS.
You can use WITH_GPL_DTC is you need the GPL one or DTC= in make.conf(5)
to specify an alternate location for the compiler to use.
Discussed with: emaste, imp
All manpages in base are now compatible with mandoc(1), all roff documentation
will be relocated in the doc tree. man(1) can now use groff from the ports tree
if it needs.
Also remove checknr(1) and colcrt(1) which are only useful with groff.
Approved by: (no objections on the mailing lists)
META_MODE users actually do not need to do anything special assuming
they have COMPAT_FREEBSD11 enabled. The host tools in WORLDTMP will
continue to work just fine.
- mention COMPAT_FREEBSD11 earlier so that the steps are in chronological
order
- suggest removing /usr/obj before build to ensure there are no stale
objects
Reviewed by: allanjude, kib
Sponsored by: The FreeBSD Foundation
The upgrade process requires COMPAT_FREEBSD11 to support the combination
of "old" userland and "new" kernel that exists after "make kernel" and
reboot. Mention this explicitly for those using custom kernel configs.
Once the "new" world is installed the COMPAT_FREEBSD11 could be removed
again, but that does not seem necessary to mention in UPDATING.
Reported by: kib
Sponsored by: The FreeBSD Foundation
The existing upgrade process documented in UPDATING is both necessary
and sufficient for upgrading across the ino64 change. However, the
shortcut of installing both kernel + world before a single reboot has
been possible for quite some time, and several developers and users
were surprised by fallout from ino64. Add an explicit entry pointing
out that the full process must be followed.
Reviewed by: allanjude, gjb, vangyzen
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D10877
