checking and only recognizes numbers in base 10. The attached patch
checks errno after strtol() and uses a base of 0 to allow octal, or hex
sector numbers too.
PR: 73112
Submitted by: keramida
MFC after: 2 weeks
strings. This isn't necessarily a bug, but it can be slightly inconvenient,
because atol() doesn't know how to parse hexadecimal or octal numbers and at
least one of the options of ffsinfo(8) would be easier to use if it did.
Changing atol() -> strtol() allows one to use hex masks for -l MASK, i.e.:
orion:/a/freebsd/src/sbin/ffsinfo# ./ffsinfo -l 0x3ff /
PR: 73110
Submitted by: keramida
MFC after: 2 weeks
special-purpose code to display status for an interface for
state that was not address-oriented. This status reporting
was merged in to the address-oriented status reporting but
did not work for link address reporting (as discovered with
fwip interfaces). Correct this mis-merge and eliminate the
bogus kludge that was used for link-level address reporting.
o add an af_other_status method for an address family for
reporting status of things like media, vlan, etc.
o call the af_other_status methods after reporting address
status for an interface
o special-case link address status; when reporting all
status for an interface invoke it specially prior to
reporting af_other_status methods (since it requires the
sockaddr_dl that is passed in to status separately from
the rtmsg address state)
o correct the calling convention for link address status;
don't cast types, construct the proper parameter
This fixes ifconfig on fwip interfaces.
show file name for 'mdconfig -l -u <x>' command.
This allows to preserve API/ABI compatibility with version 0 (that's why
I changed version number back to 0) and will allow to merge this change
to RELENG_5.
MFC after: 5 days
After this change, when component is disconnected because of an I/O error,
it will not be connected and synchronized automatically, it will be logged
as broken and skipped. Autosynchronization can occur, when component is
disconnected (on orphan event) and connected again - there were no I/O
error, so there is no need to not connected the component, but when there were
writes while it wasn't connected, it will be synchronized.
This fix cases, when component is disconnected because of I/O error and can be
connected again and again.
- Bump version number.
- Implement backward compatibility mechanism. After this change when metadata in
old version is detected, it is automatically upgraded to the new (current)
version.
After this change, when component is disconnected because of an I/O error,
it will not be connected and synchronized automatically, it will be logged
as broken and skipped. Autosynchronization can occur, when component is
disconnected (on orphan event) and connected again - there were no I/O
error, so there is no need to not connected the component, but when there were
writes while it wasn't connected, it will be synchronized.
This fix cases, when component is disconnected because of I/O error and can be
connected again and again.
- Bump version number.
- Add version change history.
- Implement backward compatibility mechanism. After this change when metadata in
old version is detected, it is automatically upgraded to the new (current)
version.
o break per-address family support out into separate files
o modularize per-address family and functional operations using
a registration mechanism; this permits configuration according
to which files you include (but beware that order of the files
is important to insure backwards compatibility)
o many cleanups to eliminate incestuous behaviour, global variables,
and poor coding practices (still much more to fix)
The original motivation of this work was to support dynamic addition
of functionality based on the interface so we can eliminate the various
little control programs and so that vendors can distribute ifconfig
plugins that support their in-kernel code. That work is still to be
completed.
o Update 802.11 support for all the new net80211 functionality; some
of these operations (e.g. list *) may be better suited in a different
program
allows the user to force the creation of a GPT even when there's a
MBR on the device. The MBR is simply wiped and any partitions
described by it are lost. Without the -f option one cannot create
a GPT when there's a MBR.
and 'mediasz' is in bytes. As it so happens, we define 'last' as the
sector number of the last sector on the medium which also is the size
of the PMBR partition. Therefore, use 'last' instead of 'mediasz'.
Submitted by: Dan Markarian <markarian at apple dot com>
to lo(4) interfaces to have an effect, and that this is not needed
when using IP fast forwarding.
Sponsored by: eXtensible Open Router Project <URL:http://www.xorp.org/>
MFC after: 3 weeks
to PRECIOUSLIB from bsd.lib.mk. The side effect of this
is making installing the world under jail(8) possible by
using another knob, NOFSCHG.
Reviewed by: oliver
implying that geom(8) is a RAID solution, but it can be used for that
purpose, and a pointer in that direction is better than nothing.
PR: 73088
Submitted by: Miguel Mendez <flynn@energyhq.es.eu.org>
the MBR after it is migrated to a GPT. While this was useful during
the early days when GPT support was under development, it's something
that users can use without knowing what they're getting themselves
into. The possible harm outweights the marginal usefulness it now has.
reversals+system lock ups if they are using ucred based rules
while running with debug.mpsafenet=1.
I am working on merging a shared locking mechanism into ipfw which
should take care of this problem, but it still requires a bit more
testing and review.
1) ginode() is passed a cylinder group number and inode number. The inode
number is relative to the cg. Use this relative number rather than the
absolute inode number when searching the cg inode bitmap to see if the inode
is allocated. Using the absolute number quickly runs the check off the end
of the array and causes invalid inodes to be referenced.
2) ginode() checks the absolute indoe number to make sure that it is greater
than ROOTINO. However, the caller loops through all of the possible inode
numbers and directly passes in values that are < ROOTINO. Instead of halting
the program with an error, just return NULL.
3) When allocating new cylinder groups, growfs was initializing all of the
inodes in the group regardless of this only being required for UFS1. Not
doing this for UFS2 provides a significant performance increase.
These fixes allow growing a filesystem beyond a trivial amount and have
been tested to grow an 8GB filesystem to 1.9TB. Much more testing would
be appreciated.
Obtained from: Sandvine, Inc.
count of zero and instead encode this information in the inode state.
Pass 4 performed a linear search of this list for each inode in
the file system, which performs poorly if the list is long.
Reviewed by: sam & keramida (an earlier version of the patch), mckusick
MFC after: 1 month
- Document better what the -C option means.
- The -c option is currently a no-op.
- The -D and -h options do not allow switching between
single/dual console modes and internal/video consoles.
(This used to be true for the old biosdisk boot code,
but now they just force the multiple consoles mode and
serial console, respectively.)
1M blocks and optionally write the read data to a file or disk.
If a read error happens, the 1M block gets put on the end of the worklist
and will be retried with 64k blocksize.
If a read error happens again, the 64k block gets put at the end of the
worklist and will be retried with single sector reads.
The program keeps trying until you stop it.
You can refresh a disk:
recoverdisk /dev/ad1 /dev/ad1
or salvage a floppy:
recoverdisk /dev/fd0 myfloppy.flp
standing ability to list a non-existant device in /etc/ttys to keep it
from dying. This is a documented feature of init(8):
The init utility can also be used to keep arbitrary daemons running,
automatically restarting them if they die. In this case, the first field
in the ttys(5) file must not reference the path to a configured device
node and will be passed to the daemon as the final argument on its com-
mand line. This is similar to the facility offered in the AT&T System V
UNIX /etc/inittab.
So rather than fix the man page to 'break' this feature, back out the change.
At the time this change was made, people felt that the spamage from
getty was annoying on headless consoles. Andrew Gallatin noted:
> Most of my machines are headless without video cards and use a serial
> console. With devfs this means that /dev/ttyv[1-N] do not exist and
> getty bitches like this:
>
> Sep 26 11:00:11 monet getty[543]: open /dev/ttyv1: No such file or directory
and we went off and applied this hack rather than fixing getty to
sleep forever when it gets an unknown device, as was Andrew's other
suggestion. Since it breaks things, I'm off to do that instead.
and disklabel.5. Refrencing bsdlabel.5 is somewhat bogus as it is not
connected to the build and is mostly unwritten at this point.
Reported by: Matthias Andree <matthias.andree at web.de>
PR: docs/72020
After this change it should be possible to use very big md(4) devices.
- Clean up and simplify the code a bit.
- Use humanize_number(3) to print size of md(4) devices.
- Add 't' suffix which stands for terabyte.
- Make '-S' to really work with all types of devices.
- Other minor changes.
and sent to the DIVERT socket while the original packet continues with the
next rule. Unlike a normally diverted packet no IP reassembly attemts are
made on tee'd packets and they are passed upwards totally unmodified.
Note: This will not be MFC'd to 4.x because of major infrastucture changes.
PR: kern/64240 (and many others collapsed into that one)
contain O_UID, O_GID and O_JAIL opcodes, the F_NOT or F_OR logical
operator bits get clobbered. Making it impossible to use the ``NOT'' or
``OR'' operators with uid, gid and jail based constraints.
The ipfw_insn instruction template contains a ``len'' element which
stores two pieces of information, the size of the instruction
(in 32-bit words) in the low 6 bits of "len" with the 2 remaining
bits to implement OR and NOT.
The current code clobbers the OR and NOT bits by initializing the
``len'' element to the size, rather than OR'ing the bits. This change
fixes this by changing the initialization of cmd->len to an OR operation
for the O_UID, O_GID and O_JAIL opcodes.
This may be a MFC candidate for RELENG_5.
Reviewed by: andre
Approved by: luigi
PR: kern/63961 (partially)
0xffffffff sectors. Document this limit and avoid installing bogus
labels on disks with more sectors.
Allowing the installation of labels addressing as much of the disk as
possiable may be a useful addition in some situations, but this was easy
to implement and should reduce confusion.
PR: bin/71408
increasing it. Add code to ifconfig to use this size to find the
sockaddr_dl after the struct if_data in the routing message. This
allows struct if_data to grow (up to 255 bytes) without breaking
ifconfig.
Submitted by: peter
keyword but without 'logamount' limit the amount of their log messages
by net.inet.ip.fw.verbose_limit sysctl value.
RELENG_5 candidate.
PR: kern/46080
Submitted by: Dan Pelleg
MFC after: 1 week
