bsd.man.mk when I change the latter to use `::' instead of `:'
dependencies. (bsd.man.mk is included because NOMAN isn't defined.
The maninstall target is supposed to be private to bsd.man.mk so
bsd.man.mk doesn't bother testing if it is already defined. The
test for redefinition in Makefile.dev was too early to do anything.)
Change install target to a beforeinstall target (perhaps there should
be an `extrainstall' target so that Makefiles don't have to abuse
one of beforeinstall, install, realinstall or afterinstall). Don't
bother testing for the install target already being defined. Rewrite
the shell loop as a make loop (this reduces the time for installing
groff from 78s to 65s here).
include this in the old makefiles.
I intended to fix only the private maninstall rule but found a lot of
other bogons and bugs:
- strong resistance to installing the program anywhere other than
${DESTDIR}/usr/bin (first, ../../Makefile.inc was not included.
../Makefile/inc was redundantly included instead. Second, /usr/bin
was hard coded).
- the owner, group and permissions were hard coded.
- the man page was installed twice.
- MANDEPEND wasn't necessary.
- calculations to determine the obj directory weren't necessary.
- there were unnecessary private rules for depend, rcsfreeze and tags.
We don't support the rcsfreeze target.
- there was an extra, bogus, rule for `all'.
The final version uses suffix rules to eliminate the remaining verboseness
involving directories (${.CURDIR}) and to potentially allow multiple
shell programs in one directory.
We already check for (and reject entries with) '+' or '-' as the first
character of the key side of the key/data pair; we should check the data
side too. (Letting spurious +/- entries into the NIS maps is bad karma.)
I got tired of see ``UNIX System Managers Manual''
NOTE: There still a couple of UNIXs left in here. There deal with the
documents. We may want to change there also, even though VERY little of there
even pertain to FreeBSD.
instead of the uninitialized one $(DEVICE).
I hoped these changes would fix some of the large runtime macro processing
bugs, but they seem to only fix some small build-time macro substitution
bugs. E.g., `man ms' now tells you to invoke groff with the flags `-ms'
instead of the bogus flags `-m'; `man groff now tells you that the default
device is `ps' instead of the bogus device `'.
shared library. Formerly, the message looked like this:
ld.so: run: libjdp1.so.1.0: Undefined error: 0
The new message looks like this:
ld.so: run: Can't find shared library "libjdp1.so.1.0"
(Where "run" is the name of the program being executed.)
Submitted by: jdp@polstra.com (John Polstra)
symbols.
An easy example to see this is to develop an X program which links
against Xt, but doesn't add -lX11 to the link line. It will link fine,
but cause run-time errors by ld.so because of missing symbols used by Xt
defined in X11. This patch makes the errors more readable.
Submitted by: jdp@polstra.com (John Polstra)
#ifdef out a number of calls to free() left over from the original
GNU ypserv implementation. As near as I can tell, the Berkeley DB
package does its own garbage collection, hence the caller doesn't
have to worry about free()ing the memory returned in the DBT
structures during lookups (I'm still not 1005 sure about this:
the DB code is very hard to follow. I must use dynamically
allocated memory since you can retreive arbitrarily large records
from a database, but I'm not sure where it ends up letting go
of it). This was not true with GDBM; you had
to do your own garbage collection.
The general rule is that if you allocate memory inside an RPC
service routine, you have to free() it the next time the routine is
called since the underlying XDR routines won't do it for you.
But if the DB package does this itself, then we don't need to do
it in the main program.
Note that with the original malloc(), there were never any errors
flagged. phkmalloc complained quite loudly.
in the diff. This makes it so that diffs containing files in different
subdirectories that have the same name not patch the same file. For example
a diff with patches to Makefile, des/Makefile, usr.bin/Makefile would attempt
to patch Makefile three times.
"update -jHEAD" when a file has been added on the specified tag.
It doesn't actually make cvs 'handle' it, it just stops it from dying
and leaving stray locks and other wreckage.
This was suggested by the CVS maintainers, and is in cvs-1.5.1-950901.
1: It stops invalid files being created in the cvs tree
2: It stops the import from aborting without mailing a commit message..
The first is simple, it opens the file for reading before touching the
repository, and the second catches the pieces when it hits an unreadable
file rather than just aborting mid-way through, leaving the repository in
a bit mess.
Reviewed by: rgrimes
specified in the top level Makefiles.
Previously I missed dozens of Makefiles that skip the install after
using `cmp -s' to decide that the install isn't necessary.
LINK_SPEC. This solves a problem with the f77 frontend where
aproviding the -r8 option (use REAL*8) caused `cc' to ``forget'' to
pass the entry point to the linker.
Closes PR #gnu/644: f77 -r8
Reviewed by: watanabe@komadori.earth.s.kobe-u.ac.jp (Takeshi WATANABE)
In ypserv:
yp_svc.c:
- small signal handler tweak (hopefully the last): just use sigemptyset()
to clear sa_mask.
Makefile.yp:
- Let the user specify the location of master.passwd when updating
maps (e.g. make MASTER_PASSWD=/some/path/to/master.passwd). Editing
the file to change the location of master.passwd still works. This
is mostly to let yppassswdd specify the name of the master.passwd
file itself.
In yppasswdd:
yppasswdd.c:
- Roll in some minor changes (mostly casts) from Olaf Kirch's latest
yppasswd package release (version 0.7).
- Use daemon() instead of doing all the deamonizing gruntwork ourselves.
- Call pw_init() after daemonizing ourselves. pw_init() sets up some
resource limits and blocks some signals for us. We used to do this before
every password change, but there's really no point in calling it more
than once during the life of the program.
- Change install_reaper() so that we can use it to de-install the SIGCHLD
handler if we need to (and we do in pw_mkdb() -- this is what I get for
splicing code from two different programs together).
- Use sigemptyset(&act.sa_mask) rather than act.sa_mask = 0: the latter is
decidedly non-portable. (In IRIX, HP-UX and Solaris, sigset_t is an
array of longs, not an int.)
update.c:
- Roll in change from new version (check that we're not modifying an NIS
entry in validate_args()).
- Get rid of call to pw_init() (moved to yppasswdd.c).
- Check return values from pw_util routines and return error status to
yppasswd clients if there's a problem.
- Straighten out password file copying mechanism a little. Keep a grip
on the original password file rather than summarily overwriting it so
that we can restore everything if we fail to fork() a process to update
the NIS maps.
- Pass the name of the password template file (specified with -m or
/etc/master.passwd by default) to the yppwupdate script, which in
turn should now pass it to /var/yp/Makefile.
pw_util.c:
- Nuke the pw_edit() and pw_prompt() functions -- we don't need them.
- Change all warn()s, warnx()s and err()s to syslog()s.
- Make sure we return error status to caller rather than bailing out
in pw_lock() and pw_tmp().
- Don't block SIGTERM in pw_init() (by ignoring SIGTERM, we prevent
yppasswdd from being shut down cleanly).
- Don't let pw_error() exit. (This stuff was stolen from chpass and vipw
which are interactive programs; it's okay to let pw_error() bail out
for these programs, but not in a daemon like yppasswdd).
- Fix signal handling in pw_mkdb (we need to temporarily de-install the
SIGCHLD handler so that we can wait on the pwd_mkdb child ourselves).
pw_copy.c:
- Change all warn()s, warnx()s and err()s to syslog()s.
- Add a bunch of returns() and make pw_copy() return and int ( 0 on success,
-1 on failure) so that update.c can flag errors properly.
- Return -1 after calling pw_error() to signal failures rather than
relying on pw_error() to bail out.
- Abort copying if we discover that we've been asked to change an entry
for a user that exists in the NIS passwd maps but not in the master.passwd
template file. This can happen if the passwd maps and the template file
fall out of sync with each other (or if somebody tries to spoof
us). The old behavior was to create add the entry to the password file,
which yppasswdd should not do under any circumstances.
Makefile:
- update VERSION to 0.7
yppasswdd.8:
- fix typo (forgot a carriage return somewhere)
- remove bogus reference to pwunconv(8) which FreeBSD doesn't have.
- bump version from 0.5 to 0.7
- Reflect changes in password file handling.
yppwupdate:
- Log map rebuilds to /var/yp/ypupdate.log.
- Pass the name of the template password file to /var/yp/Makefile as
$MASTER_PASSWD.
syslog connections unless they were rejected. This helps save wear and
tear on the syslog facility in large networks with many clienst systems.
yp_svc.c: Be a little smarter about using sigaction() -- set the SA_RESTART
flag.
svc_run: Be doubly paranoid about killing off child processes. Do a flag
chack and a pid check before letting child 'threads' self-destruct.
- There are two cases where the server can potentially block for a long
time while servicing a request: when handling a yp_all() request, which
could take a while to complete if the map being transfered is large
(e.g. 'ypcat passwd' where passwd.byname has 10,000 entries in it),
and while doing DNS lookups when in SunOS compat mode (with the -dns
flag), since some DNS lookups can take a long time to complete. While
ypserv is blocked, other clients making requests to the server will
also block. To fix this, we fork() ypall and DNS lookups into subprocesses
and let the parent ypserv process go on servicing other incoming
requests.
We place a cap on the number of simultaneous processes that ypserv can
fork (set at 20 for now) and go back to 'linear mode' if it hits the
limit (which just means it won't fork() anymore until the number of
simultaneous processes drops under 20 again). The cap does not apply
to fork()s done as a result of ypxfr calls, since we want to do our
best to insure that map transfers from master servers succeed.
To make this work, we need our own special copy of svc_run() so that
we can properly terminate child processes once the RPC dispatch
functions have run.
(I have no idea what SunOS does in this situation. The only other
possibility I can think of is async socket I/O, but that seems
like a headache and a half to implement.)
- Do the politically correct thing and use sigaction() instead of
signal() to install the SIGCHLD handler and to ignore SIGPIPEs.
- Doing a yp_all() is sometimes slow due to the way read_database() is
implemented. This is turn is due to a certain deficiency in the DB
hash method: the R_CURSOR flag doesn't work, which means that when
handed a key and asked to return the key/data pair for the _next_
key in the map, we have to reset the DB pointer to the start of the
database, step through until we find the requested key, step one
space ahead to the _next_ key, and then use that. (The original ypserv
code used GDBM has a function called gdbm_nextkey() that does
this for you.) This can get really slow for large maps. However,
when doing a ypall, it seems that all database access are sequential,
so we can forgo the first step (the 'search the database until we find
the key') since the database should remain open and the cursor
should be positioned at the right place until the yp_all() call
finishes. We can't make this assumption for arbitrary yp_first()s
and yp_next()s however (since we may have requests from several clients
for different maps all arriving at different times) so those we have
to handle the old way.
(This would be much easier if R_CURSOR really worked. Maybe I should
be using something other than the hash method.)
Fix the use of /usr/X386 to ${X11BASE}. Fix the pathname /usr/bin/chess
to /usr/games/chess.
XCircle.c:
Fix the comment after an ifdef to make it a real comment to silent gcc.
std.h:
Comment out a private definition of sys_errlist.
texinfo-3.6 distribution to enable the use of the cursor keys.
Since there is an open problem report (gnu/289) for this it might be
of interest for (some of) you.
I (Joerg) have also added a minor hack that makes info recognizing a
window size change while it has been suspended.
Submitted by: thomas@ghpc8.ihf.rwth-aachen.de (Thomas Gellekum)
constructors and destructors.
Add -lgcc_pic to LDADD for the shared library since C++ code uses stuff from
libgcc and we no longer have a shared libgcc. Should this be done by
CPLUSPLUSLIB?
platform, I discovered the following: if you use ypcat (or anything that
does a yp_all() for that matter) to dump out a map and then hit ^C before
it finishes, ypserv gets hit with a SIGPIPE and dies. (The ypall() service
is implemented using TCP.)
Fix: ignore SIGPIPEs.
bootparam_prot.x was changed for nfsv3 but bootparamd and callbootd
kept using the old version which fortunately failed at build time.
Copying hasn't been necessary since path handling was fixed in
rpcgen/rpc_main.c some time ago.
- Use one sprintf() to put together the path to the map database instead
of strcat()s and strcpy()s.
- Make the 'error opening database' Perror() statement sane.
on dlclose. Also correctly call constructors and destructors for libraries
linked with /usr/lib/c++rt0.o.
Change interpretation of dlopen manpage to call _init() rather than init()
for dlopened objects.
Change c++rt0.o to avoid using atexit to call destructors, allowing dlclose to
call destructors when an object is unloaded.
Change interface between crt0 and ld.so to allow crt0 to call a function on
exit to call destructors for shared libraries explicitly.
These changes are backwards compatible. Old binaries will work with the new
ld.so and new binaries will work with the old ld.so. A version number has
been introduced in the crt0-ld.so interface to allow for future changes.
Reviewed by: GAWollman, Craig Struble <cstruble@singularity.bevc.blacksburg.va.us>
cpio/copyout.c:
Don't output a file if the major, minor or totality of its rdev would be
truncated. Print a message about the skipped files to stderr but don't
report the error in the exit status. cpio's abysmal error handling doesn't
allow continuing after an error, and the rdev checks had to be misplaced
to avoid the problem of returning an error code from routines that return
void.
pax/pax.h:
Use the system macros for major(), minor() and makedev().
pax already checks _all_ output conversions for overflow. This has the
undesirable effect that failure to convert relatively useless fields
such as st_dev for regular files causes files not to be output. pax
doesn't report exactly which fields couldn't be converted.
tar/create.c:
Don't output a file if the major or minor its rdev would be truncated.
Print a message about the skipped files to stderr and report the error
in the exit status.
tar/tar.c:
For not immediately fatal errors, exit with status 1, not the error count
(mod 256).
All:
Minor numbers are limited to 21 bits in pax's ustar format and to 18
bits in archives created by gnu tar (gnu tar wastes 3 bits for padding).
pax's and cpio's ustar format is incompatible with gnu tar's ustar
format for other reasons (see cpio/README).
now safely add a line like
ldconfig -m ${PREFIX}/lib
in ports' Makefiles and packing lists without throwing away some
directories the user may have added.
Submitted by: Mostly by Paul Kranenburg <pk@cs.few.eur.nl>
Add a NOMAN= . It doesn't have a manual page yet.
Please don't cry :-). I ask Rod first. the whole isdn subdir is not
used in the moment and is only dead source code in the tree.
