is closed.
Diagnosed by Ted Anderson:
New signal queuing logic was introduced in 6.15 and allows the signal handlers
to be run explicitly by calling handle_pending_signals, instead of
immediately when the signal is delivered. This function is called at
various places, typically when receiving a EINTR from a slow system call
such as read or write. In the pty exit case, it was called from xwrite,
called from flush, while printing the "exit" message after receiving EOF
when reading from the pty (note that the read did not return EINTR but
zero bytes, indicating EOF). The SIGHUP handler, phup(), called
rechist, which opened the history file and began writing the merged
history to it. This process invoked flush recursively to actually write
the data. In this case, however, the flush noticed it was being called
recursively and decided fail by calling stderror.
My conclusion was that the signal was being handled at a bad time. But
whether to fix flush not to care about the recursive call, or to handle
the signal some other time and when to handle it, was unclear to me.
However, by adding an extra call to handle_pending_signals, just after
process() returns to main(), I was able to avoid the truncated history
after network outages and similar failures. I verified this fix in
version 6.17.
Approved by: ed (mentor)
MFC after: 1 week
This has been considered as a security hole on some specialized ml,
but currently the secteam@ doesn't consider that way.
Reviewed by: emaste, des
Sponsored by: Sandvine Incorporated
MFC after: 3 days
used here for a long time and needs their header in anycase.
2) Add (unsigned char) casts to more ctype macros.
3) Simplify menu input handling using ctype instead of range unguarded
hardcoded tricks.
- Support for IPv6 transport for AS lookup.
- Introduce $RA_SERVER to set whois server.
- Support for 4 byte ASN.
- ANSIfy function declaration in as.c.
Tested by: IHANet folks.
that takes into account the width of the largest CPU ID. On systems with
> 10 CPUs the labels for the first 10 CPUs were not lined up properly
otherwise.
Approved by: re (kib)
MFC after: 1 week
addresses several minor issues:
- Fix audit_event definitions of AUE_OPENAT_RWT and AUE_OPENAT_RWTC.
- Fix build on Linux.
- Fix printing of class masks in the audump tool.
MFC after: 3 weeks
Obtained from: TrustedBSD Project
Approved by: re (kib)
Major changes from v429:
* Don't pass "-" to non-pipe LESSOPEN unless it starts with "-".
* Allow a fraction as the argument to the -# (--shift) option.
* Fix highlight bug when underlined/overstruck text matches at end of line.
* Fix non-regex searches with ctrl-R.
Approved by: re (kensmith, kib)
Receipt of a specially-crafted dynamic update message may
cause BIND 9 servers to exit. This vulnerability affects all
servers -- it is not limited to those that are configured to
allow dynamic updates. Access controls will not provide an
effective workaround.
More details can be found here: https://www.isc.org/node/474
All BIND users are encouraged to update to a patched version ASAP.
Approved by: re (re -> SO -> dougb)
of just blowing up. A very similar change to this exists which is
GPLv3 licensed, this is my own change.
This problem was triggered by running the Boost regression tests.
See also: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=31899
Reviewed by: luigi
Approved by: re (kib)
contrib/openbsm and a subset also imported into sys/security/audit.
This patch release addresses several minor issues:
- Fixes to AUT_SOCKUNIX token parsing.
- IPv6 support for au_to_me(3).
- Improved robustness in the parsing of audit_control, especially long
flags/naflags strings and whitespace in all fields.
- Add missing conversion of a number of FreeBSD/Mac OS X errnos to/from BSM
error number space.
MFC after: 3 weeks
Obtained from: TrustedBSD Project
Sponsored by: Apple, Inc.
Approved by: re (kib)
compiled with stack protector.
Use libssp_nonshared library to pull __stack_chk_fail_local symbol into
each library that needs it instead of pulling it from libc. GCC
generates local calls to this function which result in absolute
relocations put into position-independent code segment, making dynamic
loader do extra work every time given shared library is being relocated
and making affected text pages non-shareable.
Reviewed by: kib
Approved by: re (kib)
o add missing Status and Reason codes
o parse/display Action frames
o parse/display Mesh data frames
o parse/display BA frames
Reviewed by: rpaulo
Approved by: re (kib)
/boot/kernel/hptrr.ko
/etc/mail/*.cf
/lib/libcrypto.so.5
/usr/bin/ntpq
/usr/sbin/amd
/usr/sbin/iasl
/usr/sbin/ntpd
/usr/sbin/ntpdate
/usr/sbin/ntpdc
There does not appear to be any purpose to having these timestamps, and
they have the irritating consequence that the aforementioned files will
be different every time they are rebuilt.
After this commit, the only remaining build timestamps are in the kernel,
the boot loaders, /usr/include/osreldate.h (the year in the copyright
notice), and lib*.a (the timestamps on all of the included .o files).
Reviewed by: scottl (hptrr), gshapiro (sendmail), simon (openssl),
roberto (ntp), jkim (acpica)
Approved by: re (kib)
changes from the 9.6.1rc1 version. The first 2 only affect DNSSEC.
named could incorrectly delete NSEC3 records for
empty nodes when processing a update request.
Accept DS responses from delegation only zones.
"delegation-only" was not being accepted in
delegation-only type zones.
- update for getrlimit(2) manpage;
- support for setting RLIMIT_SWAP in login class;
- addition to the limits(1) and sh and csh limit-setting builtins;
- tuning(7) documentation on the sysctls controlling overcommit.
In collaboration with: pho
Reviewed by: alc
Approved by: re (kensmith)
even if some appear to have (partially) corrupted stack traces.
E.g. kernel crashdumps typically have stack weirdness at
userland-kernel boundary.
Obtained from: vendor/upstream (CVS rev 1.118 of stack.c)
Reviewed by: emaste
Approved by: jhb
permanent solution for 9.6.1-release.
"My suggestion is to remove the whole attribute construct.
It only suppresses a warning when a function is unused. In this case
the function is defined as inline, so it's not causing a warning when
not used."
Submitted by: marcel
lots of new features compared to 9.4.x, including:
Full NSEC3 support
Automatic zone re-signing
New update-policy methods tcp-self and 6to4-self
DHCID support.
More detailed statistics counters including those supported in BIND 8.
Faster ACL processing.
Efficient LRU cache-cleaning mechanism.
NSID support.
lots of new features compared to 9.4.x, including:
Full NSEC3 support
Automatic zone re-signing
New update-policy methods tcp-self and 6to4-self
DHCID support.
More detailed statistics counters including those supported in BIND 8.
Faster ACL processing.
Efficient LRU cache-cleaning mechanism.
NSID support.
ipfilter tables via http by the user-level ippool utility. Previously
the 1024-byte buffer used to store a http request coudld easily overflow
if the length of the hostname part of the url passes exceeded 496 bytes. [1]
- Use snprintf to prevent possieble buffer overflows in future. [2]
- Do not try to close the descriptor twice on failure. [2]
Reported by: Maksymilian Arciemowicz <cxib@securityreason.com> [1]
Obtained from: NetBSD CVS [2]
MFC after: 2 weeks
This version is now licensed under a 2-clause BSD license, instead of
the Artistic license. I've reverted a lot of local modifications we made
to ee, because they have been integrated upstream as well.
Only local modifications include:
- $FreeBSD$ ID.
- Pathname to init.ee.
- catopen() call, to honor LC_MESSAGES instead of LANG.
To keep SVN happy, I'm putting an application/octet-stream mime type on
the KOI8 translations.
Reviewed by: current@
The source file, manual page and English translation are now directly
obtained from the contrib/ directory. This makes it a lot easier to
merge a newer version of ee(1) into the tree.
Thanks to: des and jhb
SIGN" instead of U+002D "HYPHEN-MINUS". This is unfortunate for two
reasons: 1) this is not the character which is actually used on the
command line, and 2) it makes it impossible to search a man page for a
specific command-line option.
This patch fixes this, but there are other unresolved issues, such as
confusion between -, \- and hy: while the latter is always (and only)
used for hyphenation, both - and \- are used for negation and
subtraction, and \- is used for command-line options and sometimes
also for parenthesis. IMHO, the correct Unicode characters are:
- hyphenation: either U+2010 or U+00AD, most likely the former (the
latter is the so-called soft hyphen, used to indicate a point at
which a text processor is allowed to hyphenate a word)
- negation and subtraction: U+2212
- parenthesis: in English, U+2214, with spaces suppressed before and
after; in some others (such as Norwegian), U+2213 with spaces
retained.
- command-line options: U+002D, because that is what is actually used
on the command line.
However, fixing this would require extensive modifications to (at least)
the doc and man macro sets...
MFC after: 1 week
OpenBSM history for imported revision below for reference.
MFC after: 2 weeks
Sponsored by: Apple, Inc.
Obtained from: TrustedBSD Project
OpenBSM 1.1
- Change auditon(2) parameters and data structures to be 32/64-bit architecture
independent. Add more information to man page about auditon(2) parameters.
- Add wrapper functions for auditon(2) to use legacy commands when the new
commands are not supported.
- Add default for 'expire-after' in audit_control to expire trail files when
the audit directory is more than 10 megabytes ('10M').
- Interface to convert between local and BSM fcntl(2) command values has been
added: au_bsm_to_fcntl_cmd(3) and au_fcntl_cmd_to_bsm(3), along with
definitions of constants in audit_fcntl.h.
- A bug, introduced in OpenBSM 1.1 alpha 4, in which AUT_RETURN32 tokens
generated by audit_submit(3) were improperly encoded has been fixed.
- Fix example in audit_submit(3) man page. Also, make it clear that we want
the audit ID as the argument.
- A new audit event class 'aa', for post-login authentication and
authorization events, has been added.
Unconstify arguments of bpf_image(), bpf_filter() and bpf_dump(). This
is needed because some ports rely heavely on these arguments (some of
them even roll out their own implemenentations of bpf_dump).
