14821 Commits

Author SHA1 Message Date
alc
a4f72c3f1c _pmap_unwire_pte_hold and pmap_remove_page:
Use pmap_TLB_invalidate instead of invltlb_1pg to eliminate
	unnecessary IPIs.

pmap_remove, pmap_protect and pmap_remove_pages:
	Use pmap_TLB_invalidate_all instead of invltlb to eliminate
	unnecessary IPIs.

pmap_copy:
	Use cpu_invltlb instead of invltlb when updating APTDpde.

pmap_changebit:
	Rather than deleting the unused "set bit" option (which may be
	useful later), make pmap_changebit an inline that is used
	by the new pmap_clearbit procedure.

Collectively, the first three changes reduce the number of TLB shootdown
IPIs by 1/3 for a kernel compile.
1999-04-19 18:45:21 +00:00
luoqi
4e27fe5c86 Fix a potential hang situation.
PR:		i386/2108
1999-04-19 18:44:16 +00:00
peter
6339c0a99a Don't do (1 << irq) to get an interrupt mask when irq = -1.
Submitted by:	Luoqi Chen <luoqi@watermarkgroup.com>
1999-04-19 18:03:51 +00:00
kato
c72fc3b9cd Fixed missing changes for new-bus (return value of the probe routine).
Submitted by:	Takahashi Yoshihiro <nyan@dd.catv.ne.jp>
1999-04-19 16:10:40 +00:00
peter
3fb6d34732 Remove LKM module glue Makefile. 1999-04-19 14:31:55 +00:00
peter
725616780f Zap LKM option and support. Farewell old friend. 1999-04-19 14:19:52 +00:00
peter
a74bdeb7d1 unifdef -DVM_STACK - it's been on for a while for x86 and was checked
and appeared to be working for the Alpha some time ago.
1999-04-19 14:14:14 +00:00
peter
2fc2e936d3 Fix a braino from last commit. 1999-04-19 14:01:42 +00:00
peter
83df0d6078 GC some now unused (and #if 0) code. 1999-04-19 13:34:25 +00:00
peter
ec5fa04f0e Drop the 'at nexus?' from the busses, it's not used.
Reactivate eisa0 and pnp0 in GENERIC, they work..  (eisa has been converted
but pnp still (for the most part) works the old way).
1999-04-19 11:53:36 +00:00
kato
49d52688ca Sync with sys/isa/sio.c revision 1.226. 1999-04-19 11:11:01 +00:00
kato
193b16e006 Sync with sys/i386/i386/userconfig.c revision 1.135. 1999-04-19 11:06:08 +00:00
kato
5e79bb76b5 Sync with sys/boot/i386/loader/Makefile revision 1.32. 1999-04-19 11:02:19 +00:00
brian
44058649e6 Spelling police 1999-04-19 10:18:34 +00:00
dfr
5d0d9feb9e Add commented out entries for ata driver now that it works on the alpha. 1999-04-19 08:56:38 +00:00
dfr
383d09639e Add seatbelts. 1999-04-19 08:55:11 +00:00
dfr
e374d062a8 Fix some confusion between physical and virtual addresses when recording
the driver's choice of memory window.
1999-04-19 08:42:39 +00:00
peter
8794200df4 Always create attach points for the various child busses that can be
attached to the nexus.  With one exception, this (for example) allows
you to do wierd things like kldload the eisa bus on the fly and then
drivers, and have it auto probe the eisa bus when the drivers come online.

The one exception being pci, it only adds the pcib after the presence of
the pci bus is detected and that's #if'ed code.

A side effect of this is that isa and eisa will be attached to the nexus
directly rather than the PCI->ISA or PCI->EISA bridges.  I'm not sure if
this is good or bad at this point, but it seems to be closer to the way
things are for the i386 family...  This is likely to be followed up.

This also fixes compilation without a PCI bus configured and will allow
eisa to work without PCI too.
1999-04-19 08:04:19 +00:00
peter
8755eb28bf EISA can (or will) be a child of the i386 nexus on non-PCI systems. 1999-04-19 07:58:34 +00:00
peter
57dc7b24eb Set the bus description for EISA, like it is for ISA. 1999-04-19 06:57:33 +00:00
imp
314f2274cf Set ifq_maxlen to eliminate "zp0 XXX: driver didn't set ifq_maxlen"
message on boot.

I know this driver is depricated, but I need to use it for a little
while.
1999-04-19 06:56:24 +00:00
sos
390eb1b3d2 Update to use the new-bus framework. No functional changes.
Mostly done by Doug Rabson, minor fixes by me.
1999-04-18 20:48:15 +00:00
peter
8ffa409102 Compile without a PCI bus in the kernel. 1999-04-18 20:15:06 +00:00
peter
b10162efe5 Make the bt isa driver work..
- fix cut/paste problem. :-)
- don't forget to call isa_dmacascade()
- reset the port after we release resources.

That last one is a trap to watch out for..  The isa bus driver uses the
same port/irq/mem/etc variables for the initial probe hints as it does
for allocation/deallocation tracking.  Releasing a resource clears the
variable and then you loose the hint during attach.. (ouch!)
1999-04-18 19:08:28 +00:00
peter
886743eeea Check bus_setup_intr() as a seatbelt... 1999-04-18 19:03:50 +00:00
jkh
c158e3771f Add entries for Intel 82443GX chipset.
Submitted by:           Steinar Haug <sthaug@nethelp.no>
1999-04-18 18:44:21 +00:00
peter
d31d6be6f6 Implement an EISA new-bus framework. The old driver probe mechanism
had a quirk that made a shim rather hard to implement properly and it was
just easier to convert the drivers in one go.  The changes to the
buslogic driver go beyond just this - the whole driver was new-bus'ed
including pci and isa.  I have only tested the EISA part of this so far.

Submitted by:	 Doug Rabson <dfr@nlsystems.com>
1999-04-18 15:50:35 +00:00
peter
dfb16d4177 Remove i386-specific psm.c - it's now in sys/isa/psm.c 1999-04-18 15:13:03 +00:00
peter
c2b064f676 Merge revs 1.57 and 1.60 of i386/isa/psm.c 1999-04-18 15:12:11 +00:00
dfr
58dd4aa092 Add support for 'disabled' probe hint. 1999-04-18 15:10:58 +00:00
kato
6b69df13a8 Sync with follwing files:
Path				Revision
i386/conf/GENERIC		1.162
i386/conf/Makefile.i386		1.146
i386/conf/files.i386		1.236
i386/conf/options.i386		1.111
i386/i386/machdep.c		1.329
i386/i386/userconfig.c		1.134
i386/isa/fd.c			1.135
i386/isa/if_ed.c		1.151
i386/isa/isa_dam.c		1.1
i386/isa/npx.c			1.67
isa/sio.c			1.224
dev/syscons/syscons.c		1.300
i386/isa/wd.c			1.194
isa/vga_isa.c           1.5
isa/atkbd_isa.c         1.3
isa/syscons_isa.c       1.2

Submitted by:	Takahashi Yoshihiro <nyan@wyvern.cc.kogakuin.ac.jp>
1999-04-18 14:42:20 +00:00
peter
da8f615ce6 These two have been replaced with isa/sio* in the generic isa area. 1999-04-18 14:38:42 +00:00
peter
d7c3fd16a8 Merge missing changes from i386/isa/sioreg.h (PC98 related) 1999-04-18 14:37:47 +00:00
peter
8095c1f136 Tidy up a few things left over from the conversion from i386/isa/sio.c.
Leave two #if 0'd notes about the way things used to be done for reference.
1999-04-18 14:35:28 +00:00
kato
3da450ec10 Added PC98 code.
Submitted by:	Takahashi Yoshihiro <nyan@wyvern.cc.kogakuin.ac.jp>
1999-04-18 14:30:55 +00:00
dfr
44d8b46bff Register sio interrupts as fast (fixing some silo overflow messages). 1999-04-18 14:11:01 +00:00
dfr
219dec9bd3 Use perl, not perl5 to compile interfaces. 1999-04-18 13:31:23 +00:00
dcs
1ff58a39ac Add support for Joliet extensions to the iso9660 fs. The related PR
cannot yet be closed, though.

I hope I got all credits right, and that the multiple submitted by lines
do not break anyone's scripts...

PR:		kern/5038, kern/5567
Submitted by:	Keith Jang <keith@email.gcn.net.tw>
Submitted by:	Joachim Kuebart <joki@kuebart.stuttgart.netsurf.de>
Submitted by:	Byung Yang <byung@wam.umd.edu>
Submitted by:	Motomichi Matsuzaki <mzaki@e-mail.ne.jp>
1999-04-18 10:58:03 +00:00
dcs
7da9554ad1 Installs a default loader.rc if none exists. Document loader.conf. 1999-04-18 09:21:12 +00:00
dcs
324546512f A default loader.rc to be installed. 1999-04-18 09:20:08 +00:00
peter
f8ccdc284f I missed this PnP change for new-bus..
Submitted by:	Blaz Zupan <blaz@gold.amis.net>
1999-04-18 06:13:33 +00:00
bde
4b9d91f834 Actually build the new fxp module.
Updated comments about rotten modules.

Fixed disorder and English errors.
1999-04-18 03:18:33 +00:00
paul
067e3249ab Set ifq_maxlen to IFQ_MAXLEN 1999-04-18 01:49:16 +00:00
paul
92f601986d Set ifq_maxlen to number of transmit descriptors. 1999-04-18 01:37:19 +00:00
mjacob
10199fefce Make WangTek 51000 a fixed block device.
PR:		kern/11194
Obtained from:naddy@mips.rhein-neckar.de
1999-04-18 01:05:03 +00:00
paul
9510d8b369 The changes to vm_page.c have broken the assumption that mallocing
early will result in memory below 16M so now we need to explicitly use
contigmalloc to get low physical memory.
1999-04-18 01:03:46 +00:00
n_hibma
1b83672628 UHCI_DEBUG should of course be OHCI_DEBUG
Reported by: MAEKAWA Masahide <bishop@rr.iij4u.or.jp>
1999-04-17 21:48:03 +00:00
dfr
8a353ac4a3 Probe the SiS 85c503 as a PCI-ISA bridge. 1999-04-17 19:48:45 +00:00
peter
649a72f196 Wrap the pcm driver for old isa probes.
Correct #ifdef typo for sbxvi (Thanks Brian!)
1999-04-17 19:38:38 +00:00
peter
82d728b4a9 Disconnect lkm subdir so we don't build a lkm module, in case something
I do breaks world or the nightly snapshots.  (you can still do it by hand
though for the moment)
1999-04-17 16:31:13 +00:00