This addresses a deadlock during boot when EARLY_AP_STARTUP is configured:
a taskqueue thread may call pause() with an ACPI mutex held, and thread0
may block on this mutex before configuring the eventtimer. In this case
the taskqueue thread will sleep forever waiting for its callout to fire.
PR: 220277
Submitted by: jhb
MFC after: 3 days
Includes:
- Support for X550EM devices.
- Support for Bypass adapters.
- Flow Director code moved to separate files
- SR-IOV code moved to separate files
- Netmap code moved to separate files
Differential Revision: https://reviews.freebsd.org/D11232
Submitted by: Jeb Cramer <cramerj@intel.com>
Reviewed by: erj@
Tested by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Sponsored by: Intel Corporation
sbavail() returns u_int and sendwin is a uint32_t. Therefore, min() (which
operates on two u_int values) is able to correctly calculate the minimum
of these two arguments.
Reported by: rrs
MFC after: 1 week
Sponsored by: Netflix
This driver is standard rather than optional because it can always provide
time after a reboot, but it will only provide time after a power cycle if
battery power is supplied to the chip's SNVS power domain.
socket structure into a listening socket. This resulted in an invalid
instruction fault for all 32-bit platforms.
When INVARIANTS is set the union where the two uninitialized fields
reside gets properly zeroed. This patch ensures the two uninitialized
fields are zeroed when INVARIANTS is undefined.
For 64-bit platforms this issue was not visible because so->sol_upcall
which is uninitialized overlaps with so->so_rcv.sb_state which is
already zero during soalloc();
For 32-bit platforms this issue was visible and resulted in an invalid
instruction fault, because so->sol_upcall overlaps with
so->so_rcv.sb_sel which is always initialized to a valid data pointer
during soalloc().
Verifying the offset locations mentioned above are identical is left
as an exercise to the reader.
PR: 220452
PR: 220358
Reviewed by: ae (network), gallatin
Differential Revision: https://reviews.freebsd.org/D11475
Sponsored by: Mellanox Technologies
Collapse should be more effective than defragmentation.
Added missing declaration of ena_check_and_collapse_mbuf().
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
TSO settings were not reflecting real HW capabilities.
DMA tags were created with wrong window - high address was the same as
low, so excluding window was not working.
Capabilities of TX dma transaction were not set properly - TSO max size
had been increased and size of one segment had been adjusted.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
RX lock is no longer required. There can only be one RX cleanup task
running at a time, RX cleanup cannot be executed if interface is not
yet initialized and ena_down() will not free any RX resources if any io
interrupt is being handled - RX cleanup task is only called from an
interrupt handler.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
If drbr_advance() is not called before doing cleanup and packet is
already enqueued for sending (tx_info is holding pointer to mbuf), then
mbuf is cleaned both in drbr_flush() and in cleanup routine, when all
mbufs hold by tx_buffer_info are being released.
This causes panic, because mbuf is released twice.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
If driver left MSI-x handlling routine because interface was put down,
it is not unmasking IRQs, so any requesting interrupt will be awaiting
for unmasking.
On ena_up() routine all interrupts are being unmasked and any awaiting
interrupt will be handled right away.
If handler was executed before driver state was set as running, handling
routine is being ended immediately, leaving IO irqs for given queue
masked.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
It is required to hold lock that is associated with buffer ring before
flushing drbr.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Lack of this lock was causing crash if down was called in
parallel with the initialization routine.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
the commit message; as actually implemented, the intent is to retry
up to 2 ms for controllers to enable bus power.
Noticed by: ian@, rgrimes@
Additional note: Among others, the problem addressed by r320577 is
the APL32 ("Storage Controllers May Not Be Power Gated") erratum.
Hopefully, along with r318282, r320577 works around the remaining
problems seen with Intel Apollo Lake eMMC and SDXC controllers.
The vm_map_fixed() and vm_map_stack() VM functions return Mach error
codes. Convert them into errno values before returning result from
exec_new_vmspace().
While there, modernize the comment and do minor style adjustments.
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Upstream DTS for A64 SoC doesn't provide a /clocks node as Linux switched
to ccu-ng
This commit adds the necessary bits to boot on pine64 with latest DTS from
upstream.
USB is not working for now and some node aren't present in the DTS (like the
PMU, Power Management Unit).
Tested on: Pine64
iflib - reset fl-ifl_fragidx to 0 on iflib_fl_bufs_free(). This caused the
panic in em/igb when adding it to a bridge device.
iflib - Handle out of order packet delivery from hardware in support of LRO
Out of order updates to rxd's is fixed in r315217. However, it is not
completely fixed. While refilling the buffers, iflib is not considering
the out of order descriptors. Hence, it is refilling sequentially.
"idx" variable in _iflib_fl_refill routine is incremented sequentially.
By doing refilling sequentially, it will override the SGEs that
are *IN USE* by other connections. Fix is to maintain a bitmap of
rx descriptors and differentiate the used one with unused one and
refill only at the unused indices. This patch also fixes a
few bugs in bnxt, related to the same feature.
Submitted by: bhargava.marreddy@broadcom.com
Reviewed by: venkatkumar.duvvuru@broadcom.com shurd
Differential Revision: https://reviews.freebsd.org/D10681
Instead of using GID_FT SNS request to get list of registered FCP ports,
use GID_PT to get list of all Nx_Ports, and then use GFF_ID and/or GFT_ID
requests to find whether they are FCP and target capable.
The problem with old approach is that GID_FT does not report ports without
FC-4 type registered. In particular it was impossible to boot OS from
FreeBSD FC target using QLogic FC BIOS, since one does not register FC-4
type even on new cards and so ignored by old code as incompatible.
As a side bonus this allows initiator to skip pointless logins to other
initiators by fetching that information from SNS instead.
In case some switches do not implement GFF_ID/GFT_ID correctly, add sysctls
to disable that functionality. I handled broken GFF_ID of my Brocade 200E,
but there may be other switches with different bugs.
Linux also uses GID_PT, but GFF_ID is disabled by default there, and GFT_ID
is not supported.
Sponsored by: iXsystems, Inc.
It is useful to know exactly what features may be lacking when trying to
mount ext4 filesystems.
Submitted by: Fedor Uporov
Differential Revision: https://reviews.freebsd.org/D11208
to demote it to 512 pages, then remove each of these. We can just remove
the l2 map directly. This is what the intel pmaps already do.
Sponsored by: DARPA, AFRL
gap entry in the vm map being smaller than the sysctl-derived stack guard
size. Otherwise, the value of max_grow can suffer from overflow, and the
roundup(grow_amount, sgrowsiz) will not be properly capped, resulting in
an assertion failure.
In collaboration with: kib
MFC after: 3 days
All 32bit MIPS ABIs align uint64_t on 8-byte. Since struct kevent32
is defined using 32bit types to avoid extra alignment on amd64/i386,
layout of the structure needs paddings on PowerPC and apparently MIPS.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D11434
This patch was inspired by an opposite change made to shrink the code
for the boot loader.
On my i7-4770, it increases the skein1024 speed from 470 to 550 MB/s
Reviewed by: sbruno
MFC after: 1 month
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D7824
