* This fixes cases where the group id of wide commands got lost, e.g. this
happened to the IWM_SCAN_ABORT_UMAC command.
Obtained from: dragonflybsd.git 71310fab0caca79bb5da43d9d642e77a4c27eea2
* Since a RUN -> INIT/SCAN transition seems to immediately destroy the
ieee80211_node for the AP, we can't read the in_assoc value from there.
Instead just directly pass that information via a boolean_t argument.
* Adds iwm_mvm_rm_sta_id() function, which just unconditionally removes
the station from the firmware.
* The iwm_mvm_rm_sta() function shouldn't actually remove the station from
firmware when we are still associated (i.e. during a RUN -> INIT/SCAN
transition).
* So when disassociating we will first call iwm_mvm_rm_sta() to drain the
queues/fifos. Later during disassociation we will then use
iwm_mvm_rm_sta_id() to actually remove the station.
Inspired-By: Linux iwlwifi
Obtained from: dragonflybsd.git 81b3c1fe9122fa22f33d97103039cc375f656231
* Add a per-vap ps_disabled flag, and use it for a workaround which fixes
an association issue when powersaving is enabled.
* Compute flag that should correpsond to the mvmif->bss_conf.ps flag in
Linux's iwlwifi (e.g. this disallows powersaving when not associated
yet).
Inspired-By: Linux iwlwifi
Obtained from: dragonflybsd.git dc2e69bdfe8c9d7049c8a28da0adffbfbc6de5c0
* Power management handling is per-vap, not per-node, so we should pass
the iwm_vap in these arguments.
Obtained from: dragonflybsd.git 62a4e7957a736b4de38938b02fa7eb9b45bc5d0d
* Otherwise we would never update powersaving settings until we complete
an association, after the first authentication attempt.
* This corresponds to what Linux iwlwifi seems to do.
Obtained from: dragonflybsd.git aa128dc02a17c2e616232ef0fa997121e969c995
* Tear down the relevant firmware state (i.e. the station, the vif binding)
in these transition cases.
* Before this case would leave the firmware state lying around, resulting
in errors and firmware panics in the subsequent association attempts.
Obtained from: dragonflybsd.git 94b501399fde6368ae388a669c95b099a6e66e93
* This adds iwm_mvm_rm_sta(), which will be used to tear down firmware
state for better/cleaner iwm_newstate() handling.
* Makes iwm_enable_txq() and iwm_mvm_flush_tx_path() non-static, add
the declarations to if_iwm_util.h for now.
Obtained from: dragonflybsd.git 85d1c6190c4c3564b1a347f253e823aa95c202b2
* Hence no need to keep stuff in separate iwm_assoc() function, just
inline the stuff into iwm_newstate().
Obtained from: dragonflybsd.git e8f7d88e0d030f138f95ecdb7c1a729d9fb0d6ab
* Inspired by iwn(4) and Linux iwlwifi.
* Read wme parameters into a buffer within struct iwm_vap in
iwm_wme_update().
* If we aren't associated yet, the new settings will soon be sent
by iwm_mvm_mac_ctxt_changed() during association.
* If we are already associated, explicitly call iwm_mvm_mac_ctxt_changed()
from iwm_wme_update() to send the new settings to the firmware.
* Change iwm_mvm_ac_to_tx_fifo mapping, to fit the freebsd net80211
WME stream class numbering, instead of Linux's enum ieee80211_ac_numbers.
Obtained from: dragonflybsd.git b8bd6cd746d1f45e616ccfcbeed06dfe452a1108
* Factor out iwm_handle_rxb() function from iwm_notif_intr().
* Removing the IWM_FH_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK flag allows
the device to put multiple frames (both command responses and 80211
frames) into a single RX buffer.
* Uses m_copym() to split up the receive buffers when multiple 80211
frames are received in one RX buffer. The effect is basically the same
as when using m_split(), but we want to keep the original mbuf around
when calling iwm_mvm_rx_rx_mpdu() to make error handling a bit easier
for now.
* Contains a small optimization to avoid the m_copym() when only a single
80211 frame is received in one RX buffer (i.e. matching the existing
behaviour).
Obtained from: dragonflybsd.git b5eb43f0280bbcfd26af51cf5a4b8e8ff3590b67
* Fixes oversight from commit 757eecf0e6c92745aa2eee95811e573c8300850e.
fw_has_api now uses the isset macro instead of a simple logical-and.
Obtained from: dragonflybsd.git c00575de8491dc402abf52c8c7e1cca1ef79e257
* Store macid and color values in struct iwm_vap, to avoid hardcoded
constants a bit.
* Add iwm_mvm_binding_remove_vif() function (will be used in disconnecting
from an access point without resetting the whole device).
* Not adding code from Linux iwlwifi yet, to handle one PHY context to
be bound to several VAPs/virtual-interfaces, it's definitely not needed
in the near future.
Obtained from: dragonflybsd.git f16ef74977e51e1bfc7a625dd18b98b02158e0e5
For GEN1 Hyper-V, vmbus is attached to pcib0, which contains the
resources for PCI passthrough and SR-IOV. There is no
acpi_syscontainer0 on GEN1 Hyper-V.
For GEN2 Hyper-V, vmbus is attached to acpi_syscontainer0, which
contains the resources for PCI passthrough and SR-IOV. There is
no pcib0 on GEN2 Hyper-V.
The ACPI VMBUS device now only holds its _CRS, which is empty as
of this commit; its existence is mainly for upward compatibility.
Device tree structure is suggested by jhb@.
Tested-by: dexuan@
Collabrated-wth: dexuan@
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D10565
controllers that do not support or have broken ACMD12 implementations.
Reviewed by: jmcneill
Obtained from: NetBSD
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC (Netgate)
Differential Revision: https://reviews.freebsd.org/D10602
- Do not leak the adapter lock in sysctl_autoneg.
- Accept only 0 or 1 as valid settings for autonegotiation.
- A fixed speed must be requested by the driver when autonegotiation is
disabled otherwise the firmware will reject the l1cfg command. Use
the top speed supported by the port for now.
MFC after: 3 days
Sponsored by: Chelsio Communications
This might improve throughput slightly when far from the accesspoint,
apparently by allowing the firmware to listen on either of the two
antennas (if there are two, i.e. on 7260/7265/8260), whichever has
a better reception.
Obtained from: dragonflybsd.git 3b7fc5aac51f81062da0a2c8fdac23e683fbd548
* The DEVICE_POWER_FLAGS_CAM_MSK flag was removed in the upstream iwlwifi
in Linux commit ceef91c89480dd18bb3ac51e91280a233d0ca41f.
* Add sc_ps_disabled flag to struct iwm_softc, which corresponds to
mvm->ps_disabled in struct iwl_mvm in Linux iwlwifi.
* Adds a hw.iwm.power_scheme tunable which corresponds to the power_scheme
module parameter in Linux iwlwifi. Set this to 1 for completely
disabling power management, 2 (default) for balanced powermanagement,
and 3 for lowerpower mode (which does dtim period skipping).
* Imports the constants.h file from iwlwifi as if_iwm_constants.h.
* This doesn't allow changing the powermanagement setting while connected,
also one can only choose between enabled and disabled powersaving with
ifconfig (so switching between balanced and low-power mode requires
rebooting to change the tunable).
* After any changes to powermanagement (i.e. "ifconfig wlan0 powersave" to
enable powermanagement, or "ifconfig wlan0 -powersave" for disabling
powermanagement), one has to disconnect and reconnect to the accespoint
for the change to take effect.
Obtained from: dragonflybsd.git d7002a7990d077c92585978ea998474af50f91e0
* Fix a couple of cases where the nic lock ended up not being grabbed
during an iwm_read_prph() or iwm_write_prph().
Obtained from: dragonflybsd.git 6c5470f2db219c61e362c981fea969d97e1b8293
* Target module have ic plus etherswitch ip175c.
* Also add etherswitch support code on rt driver.
Reviewed by: mizhka
Differential Revision: https://reviews.freebsd.org/D10336
Add workaround mii access because of rt1310 is hang up on etherswitch mii poll.
And FDT away on arm platform.
Tested:
* wzr2-g300n
Submitted by: Hiroki Mori <yamori813@yahoo.co.jp>
Reviewed by: mizhka
Differential Revision: https://reviews.freebsd.org/D10295
the TOE. For now this capability is always enabled in kernels with
options RATELIMIT. t4_tom will check if_capenable once the base driver
gets code to support rate limiting for any socket (TOE or not).
This was tested with iperf3 and netperf ToT as they already support
SO_MAX_PACING_RATE sockopt. There is a bug in firmwares prior to
1.16.45.0 that affects the BSD driver only and results in rate-limiting
at an incorrect rate. This will resolve by itself as soon as 1.16.45.0
or later firmware shows up in the driver.
Relnotes: Yes
Sponsored by: Chelsio Communications
Increase hw.psm.synaptics.min_pressure default value from 16 to 32
to nearly match Linux driver (30-35 hysteresis loop).
This makes libinput tap detection more reliable.
Reviewed by: gonzo
Approved by: gonzo (mentor)
MFC after: 2 weeks
It is already included via sys/systm.h
Reviewed by: gonzo
Approved by: gonzo (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D10266
