thanks for their contiued support to FreeBSD.
This is version 10.80.00.003 from codeset 10.2.1 [1]
Obtained from: LSI http://kb.lsi.com/Download16574.aspx [1]
- Emphasize $ipv6_enable and $ipv6_prefer are deprecated.
- Add more detail descriptions about $ipv6_activate_all_interfaces.
- Add some more examples of $ifconfig_IF_ipv6.
- rtsold(8) and rtadvd(8) can be used even when ipv6_gateway_enable=NO now.
Approved by: re (kib)
mod_cc.4 and mod_cc.9 respectively to avoid any possible confusion with the cc.1
gcc man page. Update references to these man pages where required.
Requested by: Grenville Armitage
Approved by: re (kib)
MFC after: 3 days
If it overflows before the taskqueue can run, the task will be
re-added to the taskqueue and cause a loop in the task list.
Reported by: Arnaud Lacombe <lacombar@gmail.com>
Submitted by: Ryan Stone <rysto32@gmail.com>
Reviewed by: jhb
Approved by: re (kib)
MFC after: 1 day
- We no longer use the same data structure in as NetBSD in pucdata.c.
- ppc(4) has had a puc(4) attachment for a while now.
Approved by: re (blackend)
MFC after: 3 days
If a selinfo object is recorded (via selrecord()) and then it is
quickly destroyed, with the waiters missing the opportunity to awake,
at the next iteration they will find the selinfo object destroyed,
causing a PF#.
That happens because the selinfo interface has no way to drain the
waiters before to destroy the registered selinfo object. Also this
race is quite rare to get in practice, because it would require a
selrecord(), a poll request by another thread and a quick destruction
of the selrecord()'ed selinfo object.
Fix this by adding the seldrain() routine which should be called
before to destroy the selinfo objects (in order to avoid such case),
and fix the present cases where it might have already been called.
Sometimes, the context is safe enough to prevent this type of race,
like it happens in device drivers which installs selinfo objects on
poll callbacks. There, the destruction of the selinfo object happens
at driver detach time, when all the filedescriptors should be already
closed, thus there cannot be a race.
For this case, mfi(4) device driver can be set as an example, as it
implements a full correct logic for preventing this from happening.
Sponsored by: Sandvine Incorporated
Reported by: rstone
Tested by: pluknet
Reviewed by: jhb, kib
Approved by: re (bz)
MFC after: 3 weeks
As Garrett points out,
It is no more a debugging interface than setproctitle(3), and has not
been since the name started getting stuffed into the kernel. This
statement may have made sense when the name was only visible in thread
state dumps and the debugger.
PR: threads/158815
Submitted by: wollman@
driver.
Mention all ASIX USB controllers that are supported by axe(4).
Reword media types and explicly mention AX88178 is the only
controller that supports gigabit link.
While I'm here use shorten model instead of showing all controller
model numbers.
to be assigned to a non-default FIB instance.
You may need to recompile world or ports due to the change of struct ifnet.
Submitted by: cjsp
Submitted by: Alexander V. Chernikov (melifaro ipfw.ru)
(original versions)
Reviewed by: julian
Reviewed by: Alexander V. Chernikov (melifaro ipfw.ru)
MFC after: 2 weeks
X-MFC: use spare in struct ifnet
doc/, and now www/ trees, but only using the "cvsup" transport.
When "make update" is run using a tree's makefile, it can also use
"cvs" (except for www/) and "svn" (only src/).
Clean up documentation and code regarding "make update":
- Increase oddness by adding support for WWWSUPFILE and NO_WWWUPDATE to
Makefile.inc1 (analogous to PORTSSUPFILE/NO_PORTSUPDATE and
DOCSUPFILE/NO_DOCUPDATE; WWWSUPFILE already supported by www/Makefile).
- Document all trees that support CVS_UPDATE.
- Document all trees that support SUP_UPDATE.
- Document SVN_UPDATE.
- Document NO_WWWUPDATE.
- make.conf(5) mistakenly said that *SUPFILE* had defaults.
- Add an example entry for WWWSUPFILE.
the system to proceed to boot without bailing out into single user mode,
even when the file system can not be successfully mounted.
This option is implemented in mount(8) and not passed into kernel.
MFC after: 1 month
Many thanks to Tino <tinotom@gmail.com> for drawing my attention to
this, for doing a lot of testing and providing great feedback.
Many thanks to AMD for continuing to release public specifications for
their chipsets.
PR: kern/157568
Tested by: Tino <tinotom@gmail.com>
MFC after: 1 week
controllers because of TX MAC hangs when trying to send a frame
that is larger than 4K (see r200759).
PR: docs/156742
Submitted by: Michael Moll (kvedulv at kvedulv dot de)
Reviewed by: yongari@
MFC after: 6 days
being able to verify, but also having the ability to
fetch distfiles that are missing or failed the checksum
calculation
PR: docs/138887
Submitted by: Radim Kolar (hsn at sendmail dot cz)
MFC after: 5 days
which is now disabled by default. The detection is known to cause hangs
on boot with some new Lenovo laptops on FreeBSD/amd64.
Reported by: gnn
Discussed with: jkim
MFC after: 3 months
When supported by hardware, this allows to control per-port activity, locate
and fault LEDs via the led(4) API for localization and status reporting
purposes. Supporting AHCI controllers may transmit that information to the
backplane controllers via SGPIO interface. Backplane controllers interpret
received statuses in some way (IBPI standard) to report them using present
indicators.
Some files keep the SUN4V tags as a code reference, for the future,
if any rewamped sun4v support wants to be added again.
Reviewed by: marius
Tested by: sbruno
Approved by: re
with INET6 equivalents. Patch reather than re-genenerating src.conf
(given the current problem with the script that does the re-gen).
Reviewed by: gnn
Sponsored by: The FreeBSD Foundation
Sponsored by: iXsystems
MFC after: 2 weeks
wrapper around rman_adjust_resource(). Include a generic implementation,
bus_generic_adjust_resource() which passes the request up to the parent
bus. There is currently no default implementation. A
bus_adjust_resource() wrapper is provided for use in drivers.
Specifically, these changes allow a resource to back a relocatable and
resizable resource such as the I/O window decoders in PCI-PCI bridges.
- rman_adjust_resource() can adjust the start and end address of an
existing resource. It only succeeds if the newly requested address
space is already free. It also supports shrinking a resource in
which case the freed space will be marked unallocated in the rman.
- rman_first_free_region() and rman_last_free_region() return the
start and end addresses for the first or last unallocated region in
an rman, respectively. This can be used to determine by how much
the resource backing an rman must be adjusted to accomodate an
allocation request that does not fit into the existing rman.
While here, document the rm_start and rm_end fields in struct rman,
rman_is_region_manager(), the bound argument to
rman_reserve_resource_bound(), and rman_init_from_resource().
While there, fix the type of the func argument of INIT_TASK macro,
and use the modern name of the analogous facility from Linux kernel.
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
like, determines the path to a pid file as it is specified in a conf file.
Use the new feature for rc.d/named and rc.d/devd, the 2 services in the
base that list their pid files in their conf files.
Remove the now-obsolete named_pidfile, and warn users if they have it set.
on per-device basis.
- While adding support for per-device sysctls, merge from graid branch
support for ADA_TEST_FAILURE kernel option, which opens few more sysctl,
allowing to simulate read and write errors for testing purposes.
- remove self-reference in SEE ALSO section (originally was to s/XR/Xr)
cxgbe.4:
- remove blank line
- add closing .El
Reported by: manlint
MFC after: 3 days
flags, so remove that part from WITHOUT_CXX again.
This is only partially regenerated, as the entries for FDT and GPIO seem to
have switched their default state, too.
o Remove bogus ordering info
o 3C1 actually works, so remove that
o Add warning about making sure BIOS is configured properly for PnP
configured 3c509 cards.
ath_hal needs a lot more work to encompass the list of supported
cards, as the AR5416/AR9160/AR9280/AR9285 list is quite long
and extensive. In addition, there's a lot of AR5212/AR5213 based
cards that aren't on this list.
