We can reach that point with IRQs disabled, and calling ast() with IRQs
disabled can lead to a deadlock.
This should fix the freezes on arm64 under load.
Reviewed by: andrew
The conditional compilation support is now centralized in
tcp_fastopen.h and tcp_var.h. This doesn't provide the minimum
theoretical code/data footprint when TCP_RFC7413 is disabled, but
nearly all the TFO code should wind up being removed by the optimizer,
the additional footprint in the syncache entries is a single pointer,
and the additional overhead in the tcpcb is at the end of the
structure.
This enables the TCP_RFC7413 kernel option by default in amd64 and
arm64 GENERIC.
Reviewed by: hiren
MFC after: 1 month
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D14048
[RFC7413]. It also includes a pre-shared key mode of operation in
which the server requires the client to be in possession of a shared
secret in order to successfully open TFO connections with that server.
The names of some existing fastopen sysctls have changed (e.g.,
net.inet.tcp.fastopen.enabled -> net.inet.tcp.fastopen.server_enable).
Reviewed by: tuexen
MFC after: 1 month
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D14047
The keylist lock was not being acquired early enough. The only side
effect of this bug is that the effective add time of a new key could
be slightly later than it would have been otherwise, as seen by a TFO
client.
Reviewed by: tuexen
MFC after: 1 month
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D14046
the Server Base System Architecture to be a subset of the pl011 r1p5. As
we don't use the removed features it is safe to just attach to the existing
driver as is.
Sponsored by: DARPA, AFRL
(using "boot -d" at the loader propmt or setting boot_ddb in loader.conf).
Submitted by: Thomas Skibo <thomasskibo@yahoo.com>
Differential Revision: https://reviews.freebsd.org/D14428
the iicbus module for FDT-based systems.
The primary motivation for this is that host controller drivers which
declare DRIVER_MODULE(ofw_iicbus, thisdriver, etc, etc) now only need a
single MODULE_DEPEND(thisdriver, ofw_iicbus) for runtime linking to resolve
all the symbols. With ofw_iicbus and iicbus in separate modules, drivers
would need to declare a MODULE_DEPEND() on both, because symbol lookup is
non-recursive through the dependency chain. Requiring a driver to have
MODULE_DEPENDS() on both amounts to requiring the drivers to understand the
kobj inheritence details of how ofw_iicbus is implemented, which seems like
something they shouldn't have to know (and could even change some day).
Also, this is somewhat analogous to how the drivers get built when compiled
into the kernel. You don't have to ask for ofw_iicbus separately, it just
gets built in along with iicbus when option FDT is in effect.
The first call is used to gauge how much spaces is needed. Just computing
the size instead of generating the output allows to not take the proctree
lock.
It gets called by dmu_buf_init_user, which is inline but not static. So it
needs global linkage itself.
Reported by: GCC-6
MFC after: 17 days
X-MFC-With: 329722
If the user configures a states_hashsize or source_nodes_hashsize value we may
not have enough memory to allocate this. This used to lock up pf, because these
allocations used M_WAITOK.
Cope with this by attempting the allocation with M_NOWAIT and falling back to
the default sizes (with M_WAITOK) if these fail.
PR: 209475
Submitted by: Fehmi Noyan Isi <fnoyanisi AT yahoo.com>
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D14367
With r329882, in the absence of a free page shortage we would only take
len(PQ_INACTIVE)+len(PQ_LAUNDRY) into account when deciding whether to
aggressively scan PQ_ACTIVE. Previously we would also include the
number of free pages in this computation, ensuring that we wouldn't scan
PQ_ACTIVE with plenty of free memory available. The change in behaviour
was most noticeable immediately after booting, when PQ_INACTIVE and
PQ_LAUNDRY are nearly empty.
Reviewed by: jeff
new arm64 hardware, e.g. ThunderX2, seems to use this page size so was
failing to attach as the register value read back was incorrect.
While here fix the spelling on shareability.
Sponsored by: DARPA, AFRL
There are no parts useful for usermode applications in
vm/vm_pageout.h. Even for the specific applications like fstat and
lsof.
In my opinion, this protection is redundant and instead userspace
should not include the header at all. Since there are apparently
broken third party codebases, give them a bit of slack by providing
transitional period.
Reported by: julian
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
network device pointer might be NULL. Wait for any pending tasks to
complete before calling axge_stop().
MFC after: 1 week
Sponsored by: Mellanox Technologies
These interfaces were put in place to let QorIQ SoCs dictate CPU idling
semantics, in order to support capabilities such as NAP mode and deep sleep.
However, this never stabilized, and the idling support reverted back to
CPU-level rather than SoC level. Move this code back to cpu.c instead. If
at a later date the lower power modes do come to fruition, it should be done
by overriding the cpu_idle_hook instead of this platform hook.
When I wrote the patch, I wanted to remove SYSINIT() usage from amd64 code.
There is no reason to keep the divergence any more because iwasaki merged
most amd64 suspend/resume code to i386 with r235622. Note this also fixed
an enge case reported by royger. [1]
Suggested by: jhb
Reviewed by: royger
Tested by: royger [1]
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D14400 [1]
After r328977, a wired page m may have m->queue != PQ_NONE.
Reviewed by: kib
X-MFC with: r328977
Differential Revision: https://reviews.freebsd.org/D14485
use it to regulate page daemon output.
This provides much smoother and more responsive page daemon output, anticipating
demand and avoiding pageout stalls by increasing the number of pages to match
the workload. This is a reimplementation of work done by myself and mlaier at
Isilon.
Reviewed by: bsdimp
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14402
No implementation of fpu_kern_enter() can fail, and it was causing needless
error checking boilerplate and confusion. Change the return code to void to
match reality.
(This trivial change took nine days to land because of the commit hook on
sys/dev/random. Please consider removing the hook or otherwise lowering the
bar -- secteam never seems to have free time to review patches.)
Reported by: Lachlan McIlroy <Lachlan.McIlroy AT isilon.com>
Reviewed by: delphij
Approved by: secteam (delphij)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14380
Also correct a typo in the comment for these values, noted by jimharris.
Reviewed by: jimharris
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3715
NVMe support is ready and should be compiled-in
to the ppc64 kernel.
Submitted by: Wojciech Macek <wma@semihalf.org>
Obtained from: Semihalf
Sponsored by: IBM, QCM Technologies
We don't support float in the boot loaders, so don't include
interfaces for float or double in systems headers. In addition, take
the unusual step of spiking double and float to prevent any more
accidental seepage.
2. Sysctls to enable/disable driver_state_dump and error_recovery.
3. Sysctl to control the delay between hw/fw reinitialization and
restarting the fastpath.
4. Stop periodic stats retrieval if interface has IFF_DRV_RUNNING flag off.
5. Print contents of PEG_HALT_STATUS1 and PEG_HALT_STATUS2 on heartbeat
failure.
6. Speed up slowpath shutdown during error recovery.
7. link_state update using atomic_store.
8. Added timestamp information on driver state and minidump captures.
9. Added support for Slowpath event logging
10.Added additional failure injection types to simulate failures.
search for a thread to steal inside a critical section. Since this
allows the search to be preempted, restart the search if preemption
happens since the search results found earlier may no longer be
valid.
Decrease the latency of starting a thread that may be assigned to
this CPU during the search by polling for incoming threads during
the search and switching to that thread instead of continuing the
search.
Test for stale search results and restart the search before going
through the expense of calling tdq_lock_pair(). Retry some tests
after grabbing the locks since things may have changed while waiting
to get both locks.
Eliminate special case handling for stealing from an SMT peer that
uses 1 as the steal threshold. This can only succeed if a thread
has been assigned but our SMT peer has not yet started executing
it. This is quite rare and when it happens the other SMT thread
is generally waiting for the same tdq lock that we hold. Basically
both SMT threads are racing to grab the same spin lock.
Add the kern.sched.always_steal knob from a ULE patch by jeff@.
Incorporate another idea from Jeff's ULE patch. If the sched_switch()
detects that the CPU is about to go idle, try to steal a thread
before switching to the idle thread. Since the search for a thread
to steal has to be done inside a critical section in this context,
limit the impact on latency by adding the knob kern.sched.trysteal_limit
to limit the topological distance of the search and don't restart
the search if we detect stale results. If this search can't find
an stealable thread, the idle loop can do a more complete search.
Also poll for threads being assigned to this CPU during the search
and switch to them instead of continuing the search. This change
is responsibile for the majority of the improvement in parallel
buildworld times.
In sched_balance_group() change the minimum threshold from stealing
a thread from 1 to 2. Poaching a newly assigned thread from a CPU
that is waking up hasn't yet switched to that thread from idle is
likely very rare and is likely to have the same lock race as is
seen when stealing threads in the idle loop. Also use tdq_notify()
to kick the destintation CPU instead of always sending an IPI.
Update a stale comment, the number of transferable threads is not
calculated.
Reviewed by: kib (earlier version)
Comments by: avg, jeff, mav
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D12130
A super-set of the functionality of jedec_ts(4). jedec_dimm(4) reports asset
information (Part Number, Serial Number) encoded in the "Serial Presence
Detect" (SPD) data on JEDEC DDR3 and DDR4 DIMMs. It also calculates and
reports the memory capacity of the DIMM, in megabytes. If the DIMM includes
a "Thermal Sensor On DIMM" (TSOD), the temperature is also reported.
Reviewed by: cem
MFC after: 1 week
Relnotes: yes
Sponsored by: Panasas
Differential Revision: https://reviews.freebsd.org/D14392
Discussed with: avg, cem
Tested by: avg, cem (previous version, no semantic changes)
