This cuts out a large chunk of duplicated *.ucl files that just needed
dependencies tacked on, and gives generate-ucl.sh some leeway in case a
future pkg may need more than one dependency.
Run-through to determine which ones could simply be removed done with for i
in *.ucl; do diff -U3 template.ucl ${i}; done | less and inspecting for any
differences beyond just adding deps at the end. The remaining ucl files are
basically all differently-licensed, require scripts, or are marked vital.
I've opted to remove %PKGDEPS% entirely without regard for third-party ucl,
as pkgbase is not yet considered production. However, I do not hold a strong
position on this and there is approximately 0 chance it will return.
clibs should have been added previously in generate-ucl.sh as one that
doesn't have any dependencies, but do so now that we would otherwise be
tacking on the runtime dependency.
Reviewed by: manu, bapt (earlier version)
Differential Revision: https://reviews.freebsd.org/D23415
The original intention for caroot was to be packaged separately, perhaps so
that users can have a more/less conservative upgrade policy for this
separated from the rest of base.
secure/caroot/Makefile doesn't have anything interesting to package, but its
subdirectories might. Move the PACKAGE= to Makefile.inc so both blacklisted
and trusted get packaged consistently into the correct one rather than the
default -utilities. Also tag the directories for package=caroot, as they
could also be empty; blacklisted is empty by default, but trusted is not.
Add a post-install script to do certctl rehash, along with a note should we
eventually come up with a way to detect that files have been added or
removed that requires a rehash.
-caroot gets a dependency on -utilities, as that's where we provide certctl
at the moment. We can perhaps reconsider this and put certctl into this
package in the future, but there are some bits within -utilities that
unconditionally invoke certctl so let's hold off for now.
Reviewed by: manu (earlier version, before -utilities dep added)
Differential Revision: https://reviews.freebsd.org/D23352
These are just direct copies of the template. If they don't exist but are
attempted to be used, generate-ucl.sh will simply fallback to the template
anyways. Let it do so to reduce potential maintenance burden.
Make stock FreeBSD more useful for people wishing to use them. The
QEMU folks suggested this change. It adds a serial console which
allows them to interact with FreeBSD from the earliest moments. This
allows them to configure FreeBSD via the serial port to set it up for
CI use.
Reviewed by: kevans@
Sponsored by: Netflix, Inc
Differential Revision: https://reviews.freebsd.org/D22786
The recent rpi-firmware update renamed "0" to "zero" in the RPi0 DTB
filename
It also included the components needed to boot the RPi4, so install those
now -- interested parties can install sysutils/u-boot-rpi4 and copy
config_rpi4.txt to config.txt on the FAT partition in order to boot the
board. Do note that we currently don't support ethernet/usb/pci.
Reviewed by: manu
MFC after: 3 days
Postings were sent to -arch@ on 2019/09/13 and 2019/10/01, proposing and
confirming a removal of these scripts on 2019/10/31, due to significant work
needed to bring this into the modern world and nobody having done this work
in the past couple of years. No objections or proposed work was raised in
response to these postings. The tinyware may see a resurrection into a
separate repo for archival purposes if any users of it show interest in
doing so.
MFC after: never
Notices appear both in picobsd(8) (near the top for easy notice) and are
also printed to stderr on every invocation of picobsd for visibility.
The tentative date for removal is October 31st, as no volunteers have
stepped forward at all from postings to -arch@ at least.
No objection from: -arch@
MFC after: 3 days
picobsd/tinyware has had this compact HTTPD server for a long time, and some
people do use it. Move it out into usr.sbin well in advance of any action
being taken on picobsd.
This has been gated behind an HTTPD option defaulted to *off*, primarily for
two reasons:
1.) This code likely needs a good audit, as it's been living off in picobsd
land for a long time, and
2.) We don't currently ship an httpd and this may not be a welcome surprise.
Reviewed by: eugen
Differential Revision: https://reviews.freebsd.org/D21724
Since login and login.conf moved to the utilities packages move also
the post-install related commands.
Reported by: mj-mailinglist@gmx.de
Reviewed by: bapt
The default package use to be FreeBSD-runtime but it should only contain
binaries and libs enough to boot to single user and repair the system, it
is also very handy to have a package that can be tranform to a small mfsroot.
So create a new package named FreeBSD-utilities and make it the default one.
Also move a few binaries and lib into this package when it make sense.
Reviewed by: bapt, gjb
Differential Revision: https://reviews.freebsd.org/D21506
It doesn't need to be in runtime and might help people who want to
experiment with other rc system or don't use one (like in small
embedded mfsroot).
Reviewed by: bapt, gjb
Differential Revision: https://reviews.freebsd.org/D21499
Bootloader file isn't needed for jails so don't include it in FreeBSD-runtime.
Reviewed by: bapt, delphij, gjb
Differential Revision: https://reviews.freebsd.org/D21496
With this last piece in place, make -C /usr/src/release release.iso is
finally able to run in a jail. This was not possible before because
msdosfs cannot be mounted inside a jail.
Submitted by: ryan@ixsystems.com
Reviewed by: emaste@, imp@, gjb@
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D21385
"static" keywords and -Werror,-Wmissing-variable-declarations
This change adds needed "static" so it builds again with WARNS?=6
No functional changes.
MFC after: 1 week
Update login(1), its manual pages, similar utilities, and motd.5 to refer to
the new location.
Suggested by: delphij@ (re: r349256)
Reviewed by: bcr (manpages), delphij
Differential Revision: https://reviews.freebsd.org/D20721
Move the bluetooth related files from FreeBSD-runtime to a new package named
FreeBSD-bluetooth
The FreeBSD runtime is only intended to have everything for a working
FreeBSD installation and bluetooth isn't needed for that.
Reviewed by: bapt, gjb
Differential Revision: https://reviews.freebsd.org/D20959
Move the hostapd related files from FreeBSD-runtime to a new package n
FreeBSD-hostapd
The FreeBSD runtime is only intended to have everything for a working
FreeBSD installation and hostapd isn't needed for that.
Reviewed by: bapt, gjb
Differential Revision: https://reviews.freebsd.org/D20958
Move the wpa related files from FreeBSD-runtime to a new package named
FreeBSD-wpa
The FreeBSD runtime is only intended to have everything for a working
FreeBSD installation and wpa isn't needed for that.
Reviewed by: bapt, gjb
Differential Revision: https://reviews.freebsd.org/D20957
Remove RELEASE_CRUNCH here. It's obsolete and hasn't worked in a while. The
build options need to be revisited, since many older ones are listed, while
newer useful ones are not. But that rototilling I'll leave to others.
directory where the individual distribution sets exist.
The new metadata files include the build date, svn branch, and
revision of the build.
Requested by: Mellanox Technologies (via kib)
MFC after: 3 days
Sponsored by: Rubicon Communications, LLC (Netgate)
SRC_CONF, __MAKE_CONF and SRCCONF, respectively) through
to arm_install_base() and chroot_arm_build_release().
This prevents failures when the target image is intended
to be build with make.conf(5) and src.conf(5) overrides,
which are correctly handled for non-embedded image builds.
Reported and tested by: Daniel Engberg
PR: 238615
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
The fix to override the default python version when building
the sysutils/py-google-compute-engine did not work, and there
are still issues that need to be addressed in the port itself.
See bugzilla 238267 for additional details.
MFC after: 6 days
MFC with: r348438
MFC note: no-op to appease the merge tracker
Sponsored by: The FreeBSD Foundation
size is too small to bootstrap the firstboot_pkgs list.
While here, add the growfs(8) startup script to /etc/rc.conf,
as Vagrant images can be resized by modifying the Vagrantfile.
Reported by: dbaio
PR: 238226
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
The ports/head branch recently switched to python3 as the default,
which breaks the sysutils/py-google-compute-engine startup scripts,
as lang/python installs lang/python3{,.x} where lang/python2{,.x}
are needed.
Set DEFAULT_VERSIONS in release/tools/gce.conf to python=2.7, and
remove the lang/python3 inclusion in VM_EXTRA_PACKAGES.
Additionally, unset DEFAULT_VERSIONS in release/tools/vmimage.subr
to prevent persistence of DEFAULT_VERSIONS=python=2.7 in subsequent
VM/cloud image builds.
Note: at present, this affects only 13-CURRENT and 12-STABLE, as
the stable/11 branch had already switched to using the 2019Q2 branch
at the start of the 11.3-RELEASE cycle, so this does not immediately
affect 11.3-BETA, hence the 1-week merge timeout. This had been
manually tested on 13-CURRENT.
Reported by: ler (privately)
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Summary:
loader has grown to the point it's overflowing the existing 307200 bytes
allocated to it in the HFS boot partition on the isos.
Bump the space reservation up to 500k.
Submitted by: Brandon Bergren
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20301
AMIs have been breaking for the past month due to insufficient disk space.
Due to the small amount of overhead in the disk image, the EC2 AMIs end
up with the same (4GB) minimum disk size.
Reported by: Michal Krawczyk
30GB to 3GB. The raw images can be resized using truncate(1), and
other formats can be resized with tools included with other tools
included with other hypervisors.
Enable the growfs(8) rc(8) at firstboot if the disk was resized
prior to booting the virtual machine for the first time.
Discussed with: several
PR: 232313 (requested in other context)
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
If MACHINE_ARCH doesn't match TARGET_ARCH, and we're not in the special
case of building i386 images on an amd64 host, we need to pull in the
qemu-user-static package; this allows us to run some commands inside
the VM disk image chroot, most notably to install packages.
Reviewed by: gjb
MFC after: 2 weeks
Sponsored by: FreeBSD/EC2 patreon (https://www.patreon.com/cperciva)
to full filesystem. This makes the size of the arm64 SoC images
consistent with armv6 and armv7.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
This script broke around FreeBSD 11.0 as a result of SWAPMETA no longer
being reported by vmstat -z; but it also needs to be reworked due to the
arrival in EC2 of nvme ephemeral disks.
I'll turn this option back on after I've found time to rewrite the
script in question.
PR: 234686
Reported by: meta@
MFC after: 1 week
Currently, the installer uses pre-created 800KB FAT12 filesystems that
it dd's onto the ESP partition.
This changeset improves that by having the installer generate a FAT32
filesystem directly onto the ESP using newfs_msdos and then copying
loader.efi into /EFI/freebsd.
For live installs it then runs efibootmgr to add a FreeBSD boot entry
in the BIOS.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D17947
This fixes 'cdrom' target in the case when world was built by user,
and not root.
Reviewed by: imp
Differential revision: https://reviews.freebsd.org/D18414
Add a configuration for PINEBOOK image.
Pinebook is a arm64 laptop based on a Pine64 board.
Since the usb trackpad need a quirk, add a common function for adding
quirk for arm board.
A default one is supplied as most board to not need quirks.
Reviewed by: gjb
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D18337
list and remaining references from the script used to create the
MANIFEST file used by bsdinstall(8).
No MFC is planned at this time.
Sponsored by: The FreeBSD Foundation
was removed in r318881 when roff was removed from the base
system.
This results in the doc.txz distribution set containing a
single directory (./) which is empty.
Remove the "Additional documentation" option from the menu
selection of bsdinstall(8), as the plain-text documentation
installed in /usr/share/doc is installed as part of the
packageworld target.
The doc entry has not been removed from EXTRA_DISTRIBUTIONS
in Makefile.inc1, in case its removal triggers an issue with
freebsd-update(8), which is currently aware of the world/doc
component, so the empty doc.txz continues to be created as
a precaution.
Noticed by: rgrimes
MFC after: 2 days
MFC before: 12.0-RC1
Sponsored by: The FreeBSD Foundation
src branch is used when generating the hardware.html page.
MFC after: 3 days
MFC before: 12.0-BETA3
MFC with: r339873
Sponsored by: The FreeBSD Foundation
AVAHI to the list. This fixes the textproc/docproj build
seemingly following FLAVORS being added.
Specifically, the problem with the dependency chain here is:
- textproc/docproj depends on print/cups, which sets AVAHI=on
by default;
- net/avahi-app depends on devel/gobject-introspection, which
requires python3+;
- graphics/netpbm depends on graphics/mesa-libs, which can
only be built with python2.7;
- textproc/docproj depends on a number of graphics ports for
font rendering, etc.
MFC after: 3 days
MFC before: 12.0-BETA3
Sponsored by: The FreeBSD Foundation
This feature is disabled on install media as these generally won't have any
interesting kernels to be listed other than the default kernel, so the
potential performance penalty in these situations likely isn't worth it.
Approved by: re (kib)
target.
The doc/share/mk/doc.commands.mk sets SVN to /usr/local/bin/svn
by default, which is not necessarily installed by the documentation
project textproc/docproj port.
Ensure SVN can be evaluated properly to include the hardware pages
by iterating through /usr/local/bin and /usr/bin and looking for
both svn and svnlite binaries, and pass the SVN variable explicitly
through env(1) in the reldoc target to avoid failures if it does not
exist.
Approved by: re (rgrimes)
Sponsored by: The FreeBSD Foundation
dvd1.iso installation medium from including KDE4 to KDE5, as the
KDE4-based ports have been marked as deprecated in the Ports
Collection.
MFC after: 3 days
Approved by: re (rgrimes)
Sponsored by: The FreeBSD Foundation
lualoader has moved to a model where the user is expected to disable color
as desired, rather than disabling it automatically for serial boots, due to
more wide-spread support for color sequences.
In a similar vain, though also to reduce special cases, lualoader no
longer disables the beastie menu automatically for !x86. This was done in
Forth land with a different loader.rc that simply didn't invoke the menu
routines, thus wasn't necessary.
This set of changes puts release images back to how they would've been
experienced prior to the switch to Lua.
Approved by: re (rgrimes)
the probing and attaching of the PS/2 mouse (not present on EC2) and
keyboard (emulated, but not accessible via EC2).
Note that we disable atkbd0 separately even though during device probing
it shows up as a child of atkbdc0; this is necessary because the device
is also initialized during the early console setup from hammer_time.
This change cuts the kernel boot time on an EC2 c5.4xlarge instance from
7259ms down to 4727 ms.
Approved by: re (marius)
SVN checkout for placement into an EC2 AMI. We only run these if there
is a .svn directory; but in the event that SVN was used to check out a
tree which is then exported over NFS, we were unnecessarily noisy.
Reported by: Andrey Fesenko
MFC after: 3 days
X-MFC-With: r336420, r336433, r336593, r336621,
r336622, r336624, r337394, r337401
There are several scripts and targets solely used to generate install
media, make sure DB_FROM_SRC is used in that case in order to prevent
checking the host database, which is irrelevant when generating
install binaries.
Sponsored by: Citrix Systems R&D
PR: 230459
Reviewed by: gjb
Differential revision: https://reviews.freebsd.org/D16638
to help avoid hard-coding 'python<MAJOR>.<MINOR>' in several
scripts in the client-side scripts.
PR: 230248
MFC after: 3 days
Submitted by: gustavo.scalet@collabora.com
Sponsored by: The FreeBSD Foundation
flag to bsdec2-image-upload instructing it to mark the snapshot of its
root disk as public (which is independent from marking the created AMIs
as public).
Requested by: Amazon
When booting via EFI on arm we have no way to know the dtb file to load
and we always use the one provided from the bootloader.
This works in most case but :
U-Boot have some really old DTB for some boards, the sync from Linux isn't done automatically for all boards
Some boards (like TI BeagleBone series) use one u-boot for all the model and it doesn't embed the DTBs
Some boards (like IMX6 based ones), don't embed the DTB
We want u-boot to load and patch the DTB with the mac address or the display
node enabled or not.
Reviewed by: gjb, imp
Differential Revision: https://reviews.freebsd.org/D16596
The images were renamed from KERNCONF to BOARDNAME when
specified, which would result in an image name of:
12.0-CURRENT-arm-armv7-GENERIC.img
which would then be renamed to use the BOARDNAME for the
SoC the image is targeted to use. BOARDNAME was specified
for all images as of r336994, which now causes the ftp-stage
target to fail, as the rename is no longer necessary.
Sponsored by: The FreeBSD Foundation
Pine64 isn't produced anymore but Pine64-LTS is.
This image works on the LTS release and the Sopine module.
Reviewed by: gjb
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D16487
Since we have now EFI framebuffer enabled for ARM64 if we boot on a board
with an screen, u-boot will set up a EFI GOP framebuffer and we won't boot
using the serial console.
Also on RPI3 the firmware always setup the framebuffer area resulting in u-boot
always setup the EFI GOP and FreeBSD never using the serial console.
Reviewed by: gjb, lwshu (previous version)
Differential Revision: https://reviews.freebsd.org/D16472
boot.scr is a u-boot script that loads and execute ubldr.bin
If not present u-boot will automatically boot loader.efi which
is already installed.
This means that all armv6/armv7 images are now booted via EFI
Tested-On: RPI-B
Tested-On: RPI2
Tested-On: OrangePi One
Tested-On: All lot of other boards
MFC after: Never
Relnotes: yes
This is not a problem for 12-CURRENT as EFI boot works but it doesn't
for 11.
While here some board arm_install_uboot also copy ubldr.bin et create
firstboot files but it's already done in arm_install_boot
Reviewed by: gjb
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D16481
FORCE_PKG_REGISTER is broken so multiple invocation of release.sh for the
same board will fails if /scratch isn't cleaned.
Leave it but deinstall the package first.
Reviewed by: gjb
Differential Revision: https://reviews.freebsd.org/D16513
Using KERNEL made sense when all boards had different kernel configuration.
Now that all of them are using GENERIC use the board name instead
Reviewed by: gjb
Differential Revision: https://reviews.freebsd.org/D16512
This produce a generic sdcard image using armv7 GENERIC kernel that
just need some u-boot (or none if the board have u-boot or a SPI flash
for example).
Reviewed by: imp, gjb
Differential Revision: https://reviews.freebsd.org/D16410
They were added for unclear reasons in r277263. The current OpenSSH
defaults (7.5+) are reasonable, and do not include the insecure rc4 cipher:
chacha20-poly1305@openssh.com,
aes128-ctr,aes192-ctr,aes256-ctr,
aes128-gcm@openssh.com,aes256-gcm@openssh.com,
aes128-cbc,aes192-cbc,aes256-cbc
I think I recall there being a reason for a specific list of ciphers on GCE
at the time, but I do not recall what it was, and cannot find any
current GCE documentation of such a list.
So, just revert the explicit configuration and use sane openssh defaults.
PR: 230092
Submitted by: Gustavo Scalet <gustavo.scalet AT collabora.com>
MFC after: 3 days
Security: yes
This config never worked. At no time did u-boot match the kenrel match
the userland. As all the GUMSTIX gear we support is quite old and/or
not working, remove it. The duovero stuff might work, but nobody
has the hardware for it and GUMSTIX hasn't sold it in years.
The change made in r336593 assumes that the build is happening in a
svn checkout resulting in misleading debug output. Check that we're
actually working in an svn checkout before proceeding to call svn.
This is needed with new u-boot that uses the rpi-firmware dtbs.
Reviewed by: gjb
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D16240
This reduce the per-board arm_install_uboot to just install u-boot.
While here remove the installation of rpi.dtb and rpi2.dtb as we load
them from the UFS partition via ubldr.
Reviewed by: gjb, imp (older version)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D16239
and revision number announced in SNS notifications about new EC2 AMIs.
While I'm here, incorporate that information into the AMI "description"
fields, since it's more useful than simply echoing the information
already provided via the AMI "name".
Approved by: gjb
