libdes, and functionally close enough so that we created symlinks
(libdes -> libcrypto) to help older applications. With the import of
OpenSSL 0.9.7, this is no longer true and we no longer install these
symlinks. However, systems that are upgraded may have these symlinks,
which could cause non-obvious breakage at build-time. Therefore, blow
any old symlinks away in the `afterinstall' target.
When libdes was replaced with OpenSSL's libcrypto, there were a few
interfaces that the former implemented but the latter did not. Because
some software in the base system still depended upon these interfaces,
we simply included them in our libcrypto (rnd_keys.c).
Now, finally get around to removing the dependencies on these
interfaces. There were basically two cases:
des_new_random_key -- This is just a wrapper for des_random_key, and
these calls were replaced.
des_init_random_number_generator et. al. -- A few functions were used
by the application to seed libdes's PRNG. These are not necessary
when using libcrypto, as OpenSSL internally seeds the PRNG from
/dev/random. These calls were simply removed.
Again, some of the Kerberos 4 files have been taken off the vendor
branch. I do not expect there to be future imports of KTH Kerberos 4.
can only be built with MIT Kerberos.
If we didn't define this here, then SSL-using applications would have
to define OPENSSL_NO_KRB5 themselves in order to build.
via INCS. Implemented INCSLINKS (equivalent to SYMLINKS) to
handle symlinking include files. Allow for multiple groups of
include files to be installed, with the powerful INCSGROUPS knob.
Documentation to follow.
Added standard `includes' and `incsinstall' targets, use them
in Makefile.inc1. Headers from the following makefiles were
not installed before (during `includes' in Makefile.inc1):
kerberos5/lib/libtelnet/Makefile
lib/libbz2/Makefile
lib/libdevinfo/Makefile
lib/libform/Makefile
lib/libisc/Makefile
lib/libmenu/Makefile
lib/libmilter/Makefile
lib/libpanel/Makefile
Replaced all `beforeinstall' targets for installing includes
with the INCS stuff.
Renamed INCDIR to INCSDIR, for consistency with FILES and SCRIPTS,
and for compatibility with NetBSD. Similarly for INCOWN, INCGRP,
and INCMODE.
Consistently use INCLUDEDIR instead of /usr/include.
gnu/lib/libstdc++/Makefile and gnu/lib/libsupc++/Makefile changes
were only lightly tested due to the missing contrib/libstdc++-v3.
I fully tested the pre-WIP_GCC31 version of this patch with the
contrib/libstdc++.295 stuff.
These changes have been tested on i386 with the -DNO_WERROR "make
world" and "make release".
depending on perl at build time. Makefile.asm is a helper for after the
next import.
With my cvs@ hat on, the relatively small repo cost of this is acceptable,
especially given that we have other (much bigger) things like
lib*.so.gz.uu checked in under src/lib/compat/*.
Reviewed by: kris (maintainer)
Do not install games and profiled libraries to the ${CHROOTDIR}
with the initial installworld.
Eliminate the need in the second installworld. For that, make sure
_everything_ is built in the "world" environment, using the right
tool chain.
Added SUBDIR_OVERRIDE helper stuff to Makefile.inc1. Split the
buildworld process into stages, and skip some stages when
SUBDIR_OVERRIDE is set (used to build crypto, krb4, and krb5
dists).
Added NO_MAKEDB_RUN knob to Makefile.inc1 to avoid running
makewhatis(1) at the end of installworld (used when making crypto,
krb4, and krb5 dists).
In release/scripts/doFS.sh, ensure that the correct boot blocks are
used.
Moved the creation of the "crypto" dist from release.5 to
release.2.
In release.3 and doMFSKERN, build kernels in the "world"
environment. KERNELS now means "additional" kernels, GENERIC is
always built.
Ensure we build crunched binaries in the "world" environment.
Obfuscate release/Makefile some more (WMAKEENV) to achieve this.
Inline createBOOTMFS target.
Use already built GENERIC kernel modules to augment mfsfd's
/stand/modules. GC doMODULES as such.
Assorted fixes:
Get rid of the "afterdistribute" target by moving the single use
of it from sys/Makefile to etc/Makefile's "distribute".
Makefile.inc1: apparently "etc" no longer needs to be last for
"distribute" to succeed.
gnu/usr.bin/perl/library/Makefile.inc: do not override the
"install" and "distribute" targets, do it the "canonical" way.
release/scripts/{man,cat}pages-make.sh: make sure Perl manpages and
catpages appear in the right dists. Note that because Perl does
not respect the MANBUILDCAT (and NOMAN), this results in a loss of
/usr/share/perl/man/cat* empty directories. This will be fixed
soon.
Turn MAKE_KERBEROS4 into a plain boolean variable (if it is set it
means "make KerberosIV"), as documented in the make.conf(5)
manpage. Most of the userland makefiles did not test it for "YES"
anyway.
XXX Should specialized kerberized libpam versions be included into
the krb4 and krb5 dists? (libpam.a would be incorrect anyway if
both krb4 and krb5 dists were choosen.)
Make sure "games" dist is made before "catpages", otherwise games
catpages settle in the wrong dist.
Fast build machine provided by: Igor Kucherenko <kivvy@sunbay.com>
deprecated in favor of the POSIX-defined lowercase variants.
o Change all occurrences of NTOHL() and associated marcros in the
source tree to use the lowercase function variants.
o Add missing license bits to sparc64's <machine/endian.h>.
Approved by: jake
o Clean up <machine/endian.h> files.
o Remove unused __uint16_swap_uint32() from i386's <machine/endian.h>.
o Remove prototypes for non-existent bswapXX() functions.
o Include <machine/endian.h> in <arpa/inet.h> to define the
POSIX-required ntohl() family of functions.
o Do similar things to expose the ntohl() family in libstand, <netinet/in.h>,
and <sys/param.h>.
o Prepend underscores to the ntohl() family to help deal with
complexities associated with having MD (asm and inline) versions, and
having to prevent exposure of these functions in other headers that
happen to make use of endian-specific defines.
o Create weak aliases to the canonical function name to help deal with
third-party software forgetting to include an appropriate header.
o Remove some now unneeded pollution from <sys/types.h>.
o Add missing <arpa/inet.h> includes in userland.
Tested on: alpha, i386
Reviewed by: bde, jake, tmm
dependencies in the correct place, record the fact that -lssh
depends on -lcrypto and -lz.
Removed false dependencies on -lz (except ssh(1) and sshd(8)).
Removed false dependencies on -lcrypto and -lutil for scp(1).
Reviewed by: markm
- Spam /usr/lib some more by making libssh a standard library.
- Tweak ${LIBPAM} and ${MINUSLPAM}.
- Garbage collect unused libssh_pic.a.
- Add fake -lz dependency to secure/ makefiles needed for
dynamic linkage with -lssh.
Reviewed by: des, markm
Approved by: markm
1. To cross-build, one now needs to set TARGET_ARCH, and not the
MACHINE_ARCH. MACHINE_ARCH should never be changed manually!
2. Initialize DESTDIR= explicitly for bootstrap-tools, build-tools,
and cross-tools stages. This fixes broken header and library
dependencies problem. We build them in the host environment,
and obviously want them to depend on host headers and libraries.
The problem with broken header dependencies for bootstrap-tools
and cross-tools was already partially solved (see BOOTSTRAPPING
tests in bsd.prog.mk and bsd.lib.mk), but it was still there for
build-tools if the user ran "make world DESTDIR=/foo". Also,
for all of these stages, the library dependencies were broken
because of how bsd.libnames.mk define DPADD members.
We still provide a glue to install bootstrap- and cross-tools
under the ${WORLDTMP}.
Removed PATH overrides for bootstrap-, build-, and cross-tools
stages. There is just no reason why we would need to override
it, and the hacks to clean up the ${WORLDTMP} in the -DNOCLEAN
case are no longer needed with fixes from this step.
That is, we now never use ${WORLDTMP} headers and libraries,
and we don't use any ${WORLDTMP} installed binaries during
these stages. Again, these stages depend solely on the host
environment, including compiler, headers, and libraries.
3. Moved "miniperl" back from cross-tools (it has nothing to do
with a cross-compiler) to build-tools where it belongs. The
change from step 1 let to do this. Also, to make this work,
build-tools targets of "cc_tools" and "miniperl" were modified
to call "depend". Here follow the detailed explanations.
There are two categories of build tools, for now. In the first
category there are "cc_tools" and "miniperl". They occupy the
whole (sub)directory, and nothing needs to be done in this
subdirectory later during the "all" stage. They are also
constructed using system makefiles. We must build the .depend
early in the build-tools stage because:
1) They use (and depend on) the host environment.
2) If we don't do this in build-tools, the "depend" stage of
buildworld will do this for us; wrong library and header
dependencies will be recorded (DESTDIR=${WORLDTMP}) and,
what's worse, the "all" stage may then clobber the
build-architecture format tools (that we built in the
build-tools stage) with the target-architecture format
ones, breaking cross build.
In the second category there are all other build-tools. They
share their directory with the "main" module that needs them
in the "all" stage, and they don't show up themselves in the
.depend file. The portion of this fix was already committed
in gnu/usr.bin/cc/cc_tools/Makefile,v 1.52.
4. "libperl" is no longer a build tool, and "miniperl" is the
stand-alone application. I had to make this change because
build-tools and "all" stages share the same object directory.
Without this change, if we cross compile, libperl.a is first
built for the build architecture during the build-tools stage
(for the purposes of immediate linkage with "miniperl").
Later on, the "all" stage sees this library as up-to-date,
and doesn't rebuild it. The effect is that the wrong format
static libperl library is installed with installworld.
5. Fixed "includes" to install secure/lib/libtelnet headers if
required.
Reviewed by: bde
directly (except in the definition of MINUSLPAM in bsd.libnames.mk)
since it doesn't give all the libraries necessary for static linkage.
Fixed missing ${LIBPAM} in DPADD.
Fixed some style bugs in DPADD and LDADD.
directly (except in the definition of MINUSLPAM in bsd.libnames.mk)
since it doesn't give all the lbraries necessary for static linkage.
Fixed new and old bugs in DPADD. ${LIBPAM} was missing, and the
library order was different from that in LDADD so `make checkdpadd'
reported a non-bug.
library: wrong library directory, wrong library extension and wrong
comment). This is mainly of historical interest, if any. The library
that gets removed is aout.
Also, backout the beforeinstall -> afterinstall change in rev.1.20
that was required to install proper telnet.h into /usr/include/arpa.
The actual problem is in <bsd.lib.mk>, and I am going to fix it.
- TELNETOBJDIR is gone. `buildworld' already installs libtelnet.a
in ${WORLDTMP}/usr/lib, and we have LIBRARY_PATH pointing there.
- SSHDIR (formerly SSHSRC) is now shared between all SSH modules.
New LIBSSH is introduced for libssh.a (an internal static lib).
Previously, build without prior `obj' was broken; SSH modules
always looked for libssh.a in ${.OBJDIR}. Also, the dependancies
on the libssh.a were missing.
- libtelnet/ did not install the crypto version of telnet.h into
/usr/include/arpa.
- Removed BINOWN, BINMODE, BINDIR and SRCS with default values.
Reviewed by: markm
- MAN[1-9] -> MAN.
this impacts negatively to POLA since once autologin is enabled,
telnet will prompt for a password using getpass() and thus not allow
the usual signal characters or C-]
gratuitous difference between us and our sister project.
This was given to me _ages_ ago. May apologies to Paul for the length
of time its taken me to commit.
Obtained from: Niels Provos <provos@physnet.uni-hamburg.de>/OpenBSD
Submitted by: Paul Herman <pherman@frenchfries.net>
libssl, for example), and hide it behind a make.conf option,
WANT_OPENSSL_MANPAGES, instead of having it commented out. We still can't
install these by default because of clobbering of a number of system
manpages with the same name, but they're there for people who want them.
does include code for the alpha, but as far as I can tell, it is
non-functional (e.g. it's not even compiled by the native openssl build on
the alpha).
Noticed by: gallatin
through the use of a new build directive, MACHINE_CPU, which contains a
list of the CPU generations/features for which optimizations are desired.
This feature will be extended to cover the ports tree in the future.
Currently OpenSSL provides optimizations for i386, i586 and i686-class
CPUs. Currently it has not been tested on an i386 or i486.
Teach make(1) to provide sensible defaults for MACHINE_CPU if it is not
defined (namely, the lowest common denominator CPU we support for each
architecture). Currently this is i386 for the i386 architecture and ev4
for the alpha. sys.mk also sets the variable as a last resort for
consistency with MACHINE_ARCH and bootstrapping from very old versions of
make.
Benchmarks show a significant speed increase even in the i386 case, with
additional improvements for i586 and i686 systems. For maximum performance
define MACHINE_CPU=i686 i586 i386 in /etc/make.conf.
Based on a patch submitted by: Mike Silbersack <silby@silby.com>
Reviewed by: current
one-way hash functions for authentication purposes. There is no more
"set the libcrypt->libXXXcrypt" nightmare.
- Undo the libmd.so hack, use -D to hide the md5c.c internals.
- Remove the symlink hacks in release/Makefile
- the algorthm is set by set_crypt_format() as before. If this is
not called, it tries to heuristically figure out the hash format, and
if all else fails, it uses the optional auth.conf entry to chose the
overall default hash.
- Since source has non-hidden crypto in it there may be some issues with
having the source it in some countries, so preserve the "secure/*"
division. You can still build a des-free libcrypt library if you want
to badly enough. This should not be a problem in the US or exporting
from the US as freebsd.org had notified BXA some time ago. That makes
this stuff re-exportable by anyone.
- For consistancy, the default in absence of any other clues is md5. This
is to try and minimize POLA across buildworld where folk may suddenly
be activating des-crypt()-hash support. Since the des hash may not
always be present, it seemed sensible to make the stronger md5 algorithm
the default.
All things being equal, no functionality is lost.
Reviewed-by: jkh
(flame-proof suit on)
ENABLE_SUID_SSH being defined reenable it for those that want it.
This follows discussion favoring the change from September. It
is not usually necessary to be setuid root, possibly less safe,
and less convenient (cannot use $HOSTALIASES, for example).
Submitted by: jedgar
mimics that of tcpdump in that for normal builds, sendmail will only be
built once. For 'make release', it is built once for the bin dist and
once for the crypto dist. This method also removes the need for two separate
Makefiles (which could become out of sync).
Suggested by: bde
Assisted by: kris
issues that brings, build the non-TLS version of sendmail in
src/usr.sbin/sendmail and the TLS version in src/secure/usr.sbin/sendmail.
This allows the TLS version to be part of the secure distribution when
building a release.
-- Unknown
Now that the RSA algorithm is released into the public domain, build
librsaintl by default unless NO_RSAINTL is set in make.conf.
The native OpenSSL implementation of RSA is much faster, doesn't have
an artificial keysize limitation, has 30% fewer calories and tastes great!
for crypt(3) by now. In any case:
Add crypt_set_format(3) + documentation to -lcrypt.
Add login_setcryptfmt(3) + documentation to -lutil.
Support for switching crypt formats in passwd(8).
Support for switching crypt formats in pw(8).
The simple synopsis is:
edit login.conf; add a passwd_format field set to "des" or "md5"; go nuts :)
Reviewed by: peter
Beyond changes to the build system, this includes fixing up the sample
freebsd.mc configuration for changes in defaults and syntax, removing
outdated documentation, and updating the release notes.
MAKE_foo for things like MAKE_KERBEROS etc. Use that. I managed to
confuse myself last time and made make.conf different to the code. ;-(
Reported by: Jun Kuriyama <kuriyama@FreeBSD.org>
Use that to be the final arbiter of whether or not to build the
librsaintl.so plugin for openssl/openssh. Add a magic WANT_RSAINTL flag
to force building even if USA_RESIDENT=YES.
the librsa* library and reports which version of the library (OpenSSL/RSAREF)
is being used.
This is then used in openssh to detect the failure case of RSAREF and a RSA key
>1024 bits, to print a more helpful error message than 'rsa_public_encrypt() fai
led.'
This is a 4.0-RELEASE candidate.
path so that ERR_load_strings() is found in certain circumstances
involving dlopen(). eg: main program dlopened foo.so which is linked
against libcrypto. If libcrypto then dlopens librsaUSA.so, then it's
search path doens't find libcrypto (!). One "fix" is to force
modules (eg main opening foo.so) to use the RTLD_GLOBAL flag, the other
is to explicitly declare dependencies (as done here).
Reorganize and unify libcrypto's interface so that the RSA implementation
is chosen at runtime via dlopen().
This is a checkpoint and may require more tweaks still.
