Commit Graph

2263 Commits

Author SHA1 Message Date
landonf
5713e2d563 bhnd(4): Add a basic ChipCommon GPIO driver sufficient to support bwn(4)
The driver is functional on both BHND Wi-Fi adapters and MIPS SoCs, but
does not currently include support for features not required by bwn(4),
including GPIO interrupt handling.

Approved by:	adrian (mentor, implicit)
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D12708
2017-11-22 23:10:20 +00:00
landonf
58aba8062f bhnd(4): extend the PMU APIs to support bwn(4)
The bwn(4) driver requires a number of extensions to the bhnd(4) PMU
interface to support external configuration of PLLs, LDOs, and other
parameters that require chipset or PHY-specific workarounds.

These changes add support for:

- Writing raw voltage register values to PHY-specific LDO regulator
  registers (required by LP-PHY).
- Enabling/disabling PHY-specific LDOs (required by LP-PHY)
- Writing to arbitrary PMU chipctrl registers (required for common PHY PLL
  reset support).
- Requesting chipset/PLL-specific spurious signal avoidance modes.
- Querying clock frequency and latency.

Additionally, rather than updating legacy PWRCTL support to conform to the
new PMU interface:

- PWRCTL API is now provided by a bhnd_pwrctl_if.m interface.
- Since PWRCTL is only found in older SSB-based chipsets, translation from
  bhnd(4) bus APIs to corresponding PWRCTL operations is now handled
  entirely within the siba(4) driver.
- The PWRCTL-specific host bridge clock gating APIs in bhnd_bus_if.m have
  been lifted out into a standalone bhnd_pwrctl_hostb_if.m interface.

Approved by:	adrian (mentor, implicit)
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D12664
2017-11-22 20:27:46 +00:00
landonf
549b1b1ebf bhnd(4): Add support for querying DMA address translation parameters
BHND Wi-Fi chipsets and SoCs share a common DMA engine, operating within
backplane address space. To support host DMA on Wi-Fi chipsets, the bridge
core maps host address space onto the backplane; any host addresses must
be translated to their corresponding backplane address.


- Defines a new bhnd_get_dma_translation(9) API to support querying DMA
  address translation parameters from the bhnd(4) bus.
- Extends bhndb(4) to provide DMA translation descriptors from a DMA
  address translation table defined in the host bridge-specific
  bhndb_hwcfg.
- Defines bhndb(4) DMA address translation tables for all supported host
  bridge cores.
- Extends mips/broadcom's bhnd_nexus driver to return an identity (no-op)
  DMA translation descriptor; no translation is required when addressing
  the SoC backplane.

Approved by:	adrian (mentor)
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D12582
2017-11-21 23:25:22 +00:00
landonf
7bdcca7896 bhnd(4): implement MIPS and PCI(e) interrupt support
On BHND MIPS SoCs, this replaces the use of hard-coded MIPS IRQ#s in the
common bhnd(4) core drivers; we now register an INTRNG child PIC that
handles routing of backplane interrupt vectors via the MIPS core.

On BHND PCI devices, backplane interrupt vectors are now routed to the
PCI/PCIe host bridge core when bus_setup_intr() is called, where they are
dispatched by the PCI core via a host interrupt (e.g. INTx/MSI).

The bhndb(4) bridge driver tracks registered interrupt handlers for the
bridged bhnd(4) devices and manages backplane interrupt routing, while
delegating actual bus interrupt setup/teardown to the parent bus on behalf
of the bridged cores.

Approved by:	adrian (mentor, implicit)
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D12518
2017-11-21 23:15:20 +00:00
landonf
89ecfb4cb7 Preemptively map MIPS INTRNG interrupts on non-FDT MIPS targets
This replaces a partial workaround introduced in r305527 that was
incompatible with nested INTRNG interrupt controllers if not also using
FDT.

On non-FDT MIPS INTRNG targets, we now preemptively produce a set of fixed
mappings for the MIPS IRQ range during nexus attach. On FDT targets,
OFW_BUS_MAP_INTR() remains responsible for mapping the MIPS IRQs.

Approved by:	adrian (mentor)
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D12385
2017-11-21 01:54:48 +00:00
brooks
8ad641badc Remove a couple variables that are unused after r325790.
Reported by:	rpokala
2017-11-20 22:18:24 +00:00
pfg
4736ccfd9c sys: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 3-Clause license.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
2017-11-20 19:43:44 +00:00
pfg
9da7bdde06 spdx: initial adoption of licensing ID tags.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.

Initially, only tag files that use BSD 4-Clause "Original" license.

RelNotes:	yes
Differential Revision:	https://reviews.freebsd.org/D13133
2017-11-18 14:26:50 +00:00
jhibbits
88628f7a2c Convert BERI to use ofw_parse_bootargs()
Summary:
ofw_parse_bootargs() was added in r306065 as an attempt to unify the
various copies of the same code.  This simply migrates BERI to use it.

Reviewed By: brooks
Differential Revision: https://reviews.freebsd.org/D12962
2017-11-14 03:23:46 +00:00
jeff
3c355d849c Replace manyinstances of VM_WAIT with blocking page allocation flags
similar to the kernel memory allocator.

This simplifies NUMA allocation because the domain will be known at wait
time and races between failure and sleeping are eliminated.  This also
reduces boilerplate code and simplifies callers.

A wait primitive is supplied for uma zones for similar reasons.  This
eliminates some non-specific VM_WAIT calls in favor of more explicit
sleeps that may be satisfied without new pages.

Reviewed by:	alc, kib, markj
Tested by:	pho
Sponsored by:	Netflix, Dell/EMC Isilon
2017-11-08 02:39:37 +00:00
kib
24ff491bf8 Remove badsect(8).
Failure modes of the modern (that is, produced in the last 25 years)
hard drives and SSDs made the utility outdated.  Since the kernel
interface to support it was removed in r324853, cut the userspace
remnants as well.

Discussed with:	bde (who does not like the removal)
Sponsored by:	The FreeBSD Foundation
MFC after:	2 weeks
2017-11-05 22:00:54 +00:00
mizhka
b2e673ff7f [mips] Pin control configuration for MediaTek RT2880
RT2880 is MIPS4Kc SoC used in many SOHO routers. This commits adds GPIO pin
control configuration of RT2880.

Submitted by:	Hiroki Mori <yamori83@yahoo.co.jp>
Reviewed by:	mizhka, sgalabov
Differential Revision:	https://reviews.freebsd.org/D12648
2017-10-31 11:29:16 +00:00
eadler
45275e3a26 Update several more URLs
- Primarily http -> https
- Primarily FreeBSD project URLs
2017-10-29 08:17:03 +00:00
mmel
be76b77ce7 Add AT_HWCAP2 ELF auxiliary vector.
- allocate value for new AT_HWCAP2 auxiliary vector on all platforms.
 - expand 'struct sysentvec' by new 'u_long *sv_hwcap2', in exactly
   same way as for AT_HWCAP.

MFC after:	1 month
Reviewed by:	kib
Differential Revision:	https://reviews.freebsd.org/D12699
2017-10-21 12:05:01 +00:00
bz
48b1992757 With r181803 on 2008-08-17 23:27:27Z the first VIMAGE commit went into
HEAD.  Enable VIMAGE in GENERIC kernels and some others (where GENERIC does
not exist) on HEAD.

Disable building LINT-VIMAGE with VIMAGE being default.

This should give it a lot more exposure in the run-up to 12 to help
us evaluate whether to keep it on by default or not.
We are also hoping to get better performance testing.
The feature can be disabled using nooptions.

Requested by:		many
Reviewed by:		kristof, emaste, hiren
X-MFC after:		never
Relnotes:		yes
Differential Revision:	https://reviews.freebsd.org/D12639
2017-10-20 21:40:59 +00:00
jhb
5f0eb85166 Remove CPU_HAVEFPU.
Instead, use a runtime decision to handle COP1 traps.  If floating point
support is present in the current CPU, enable saving of the floating point
state.  If support is not present, fail with SIGILL.

Reviewed by:	imp, br
Sponsored by:	DARPA / AFRL
Differential Revision:	https://reviews.freebsd.org/D12707
2017-10-18 17:23:16 +00:00
markj
c87fb69add Move kernel dump offset tracking into MI code.
All of the kernel dump implementations keep track of the current offset
("dumplo") within the dump device. However, except for textdumps, they
all write the dump sequentially, so we can reduce code duplication by
having the MI code keep track of the current offset. The new
dump_append() API can be used to write at the current offset.

This is needed to implement support for kernel dump compression in the
MI kernel dump code.

Also simplify dump_encrypted_write() somewhat: use dump_write() instead
of duplicating its bounds checks, and get rid of the redundant offset
tracking.

Reviewed by:	cem
Sponsored by:	Dell EMC Isilon
Differential Revision:	https://reviews.freebsd.org/D11722
2017-10-18 15:38:05 +00:00
landonf
67cf61ca22 bhnd: Add support for supplying bus I/O callbacks when initializing an EROM
parser.

This allows us to use the EROM parser API in cases where the standard bus
space I/O APIs are unsuitable. In particular, this will allow us to parse
the device enumeration table directly from bhndb(4) drivers, prior to
full attach and configuration of the bridge.

Approved by:	adrian (mentor)
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D12510
2017-09-27 19:48:34 +00:00
landonf
2e486532df bhnd: Implement bhnd(4) platform device registration.
Add bhnd(4) API for explicitly registering BHND platform devices (ChipCommon,
PMU, NVRAM, etc) with the bus, rather than walking the newbus hierarchy to
discover platform devices. These devices are now also refcounted; attempting
to deregister an actively used platform device will return EBUSY.

This resolves a lock ordering incompatibility with bwn(4)'s firmware loading
threads; previously it was necessary to acquire Giant to protect newbus access
when locating and querying the NVRAM device.

Approved by:	adrian (mentor)
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D12392
2017-09-27 19:44:23 +00:00
landonf
f784b2bd99 Add MIPS32/64 Rev2 CP0 intctl register definitions.
Approved by:	adrian (mentor)
Differential Revision:	https://reviews.freebsd.org/D12300
2017-09-15 19:56:21 +00:00
jhb
e5ea82a50d Add AT_HWCAP and AT_EHDRFLAGS on all platforms.
A new 'u_long *sv_hwcap' field is added to 'struct sysentvec'.  A
process ABI can set this field to point to a value holding a mask of
architecture-specific CPU feature flags.  If an ABI does not wish to
supply AT_HWCAP to processes the field can be left as NULL.

The support code for AT_EHDRFLAGS was already present on all systems,
just the #define was not present.  This is a step towards unifying the
AT_* constants across platforms.

Reviewed by:	kib
MFC after:	1 month
Differential Revision:	https://reviews.freebsd.org/D12290
2017-09-14 14:26:55 +00:00
gordon
daef3d23e9 Deorbit catman. The tradeoff of disk for performance has long since tipped
in favor of just rendering the manpage instead of relying on pre-formatted
catpages. Note, this does not impede the ability to use existing catpages,
it just removes the utility to generate them.

Reviewed by:	imp, allanjude
Approved by:	emaste (mentor)
Differential Revision:	https://reviews.freebsd.org/D12317
2017-09-13 16:35:16 +00:00
lidl
9290d460ca Enable dtrace support for mips64 and the ERL kernel config
Turn on the required options in the ERL config file, and ensure
that the fbt module is listed as a dependency for mips in
the modules/dtrace/dtraceall/dtraceall.c file.

PR: 		220346
Reviewed by:	gnn, markj
MFC after:	2 weeks
Differential Revision:	https://reviews.freebsd.org/D12227
2017-09-06 03:19:52 +00:00
lidl
525799add6 Fix whitespace on "options" to be <space><tab>, no functional change 2017-09-04 20:10:34 +00:00
emaste
452dc08dca xls_ehci: eliminate 'format string is not a string literal' warning
Reported by:	Clang
MFC after:	1 week
Sponsored by:	The FreeBSD Foundation
2017-08-30 22:58:11 +00:00
emaste
7eb3bc7856 octeon_ebt3000_cf: eliminate 'format string is not a string literal' warning
Reported by:	Clang
MFC after:	1 week
Sponsored by:	The FreeBSD Foundation
2017-08-30 22:54:11 +00:00
jhb
774be9c6df Apply 64k padding to stack pointer for 32-bit processes.
In particular, MIPS now has COMPAT_FREEBSD32 for n64 kernels so this
cannot be ignored for n64.  On the other hand, it is unneeded for o32
MIPS kernels as the issue is only present when using 64-bit registers,
so remove the workaround from o32 kernels.

Reviewed by:	jmallett
Sponsored by:	DARPA / AFRL
2017-08-30 19:21:11 +00:00
emaste
a9f49d210a arge: correct bzero sizeof (pointed-to object, not pointer)
Reported by:	Clang
MFC after:	1 week
Sponsored by:	The FreeBSD Foundation
2017-08-30 17:38:55 +00:00
jhb
519d9476a9 Allow execution of FreeBSD/mips shared objects.
This was applied to all other FreeBSD architectures in r169846 but wasn't
included in the intial MIPS import.

Sponsored by:	DARPA / AFRL
2017-08-30 00:14:36 +00:00
cem
64e5e4595f Fix limits.h constants to have correct type on MIPS
Use correctly typed constants to avoid bogus errors like
https://lists.freebsd.org/pipermail/svn-src-all/2017-August/150400.html
(like x86 _limits.h).

Reported by:	bde, asomers
Reviewed by:	mjoras, tinderbox
Sponsored by:	Dell EMC Isilon
2017-08-26 03:21:12 +00:00
jhb
750a2fe0b1 Enable hardfloat CPU instructions in the FP exception handler.
This permits compiling with clang's integrated assembler.

Sponsored by:	DARPA / AFRL
2017-08-21 21:48:24 +00:00
bde
fce552fb16 Use better hard-coded defaults for the cursor shape, and remove nearby
redundant initializations.

Hard-code base = 0, height = (approx. 1/8 of the boot-time font height)
in all cases, and remove the BIOS/MD support for setting these values.
This asks for an underline cursor sized for the boot-time font instead
of various less hard-coded but worse values.  I used that think that
the x86 BIOS always gave the same values as the above hard-coding, but
on 1 of my systems it gives the wrong value of base = 1.

The remaining BIOS fields are shift_state and bell_pitch.  These are now
consistently not explicitly reinitialized to 0.  All sc_get_bios_value()
functions except x86's are now empty, and the only useful thing that x86
returns is shift_state.  This really belongs in atkbdc, but heavier
use of the BIOS to read the more useful typematic rate has been removed
there.  fb still makes much heavier use of the BIOS.
2017-08-19 19:33:16 +00:00
markj
ce8e2801bf Rename mkdumpheader() and group EKCD functions in kern_shutdown.c.
This helps simplify the code in kern_shutdown.c and reduces the number
of globally visible functions.

No functional change intended.

Reviewed by:	cem, def
Sponsored by:	Dell EMC Isilon
Differential Revision:	https://reviews.freebsd.org/D11603
2017-08-18 04:04:09 +00:00
markj
f6dd3eb223 Factor out duplicated kernel dump code into dump_{start,finish}().
dump_start() and dump_finish() are responsible for writing kernel dump
headers, optionally writing the key when encryption is enabled, and
initializing the initial offset into the dump device.

Also remove the unused dump_pad(), and make some functions static now that
they're only called from kern_shutdown.c.

No functional change intended.

Reviewed by:	cem, def
Sponsored by:	Dell EMC Isilon
Differential Revision:	https://reviews.freebsd.org/D11584
2017-08-18 03:52:35 +00:00
delphij
a165ab4585 Plug memory leak in arge_encap().
Reported by:	Ilja Van Sprundel <ivansprundel ioactive.com>
Submitted by:	Domagoj Stolfa <domagoj.stolfa gmail.com>
Reviewed by:	adrian
MFC after:	3 days
2017-08-15 06:01:36 +00:00
ian
f2163a3501 Remove the old ds1374 driver and use the ds13rtc driver instead. Adjust
several mips config files accordingly.
2017-08-13 22:07:42 +00:00
adrian
61fb46d666 [ar71xx] get rid of ath_pci - it's built as a module now. 2017-07-28 01:17:38 +00:00
adrian
ce5057b802 [ar933x] make carambola2 work again!
* Add in the hints needed for AR933x ath(4) support - this is the nicer way
  that allows ath to be a module;
* ATH_EEPROM_FIRMWARE is also required for all AR933x chipsets.

Tested:

* Carambola2, AR933x
2017-07-23 07:10:41 +00:00
adrian
823e739b44 [ar933x] re-add the ar71xx_apb device for AR933x.
This prevents the console from working!

Tested:

* carambola2, AR933x
2017-07-23 07:02:10 +00:00
trasz
74a316d911 Make ddb(4) disassembler (x/i) use n32 register names.
Obtained from:	CheriBSD
MFC after:	2 weeks
Sponsored by:	DARPA, AFRL
2017-07-06 15:08:51 +00:00
adrian
0c3e9fef3e [ar724x] put in explicit memory barriers now that read/write register no longer
implicitly do them.

They were removed as part of my "fix this to actually work" a few commits
ago in this file.

Tested:

* AP93, AR7240 + AR9280 PCI
2017-07-06 04:56:23 +00:00
adrian
bcb34fc479 [ar71xx] Start migrating the AR934x based boards over to the new world order.
This unifies the PCI hints with the AHB/NOR hint syntax.

Tested:

* DIR825C1, AR9344 SoC / 2x2 2G + AR9580 PCI 2x2 5G
2017-07-06 04:06:25 +00:00
jah
d1caaa9300 Clean up MD pollution of bus_dma.h:
--Remove special-case handling of sparc64 bus_dmamap* functions.
  Replace with a more generic mechanism that allows MD busdma
  implementations to generate inline mapping functions by
  defining WANT_INLINE_DMAMAP in <machine/bus_dma.h>.  This
  is currently useful for sparc64, x86, and arm64, which all
  implement non-load dmamap operations as simple wrappers
  around map objects which may be bus- or device-specific.

--Remove NULL-checked bus_dmamap macros.  Implement the
  equivalent NULL checks in the inlined x86 implementation.
  For non-x86 platforms, these checks are a minor pessimization
  as those platforms do not currently allow NULL maps.  NULL
  maps were originally allowed on arm64, which appears to have
  been the motivation behind adding arm[64]-specific barriers
  to bus_dma.h, but that support was removed in r299463.

--Simplify the internal interface used by the bus_dmamap_load*
  variants and move it to bus_dma_internal.h

--Fix some drivers that directly include sys/bus_dma.h
  despite the recommendations of bus_dma(9)

Reviewed by:	kib (previous revision), marius
Differential Revision:	https://reviews.freebsd.org/D10729
2017-07-01 05:35:29 +00:00
adrian
48b4146b6b [mips] [ar71xx] Since the wlan/ath drivers use ALQ, ensure we build the module
here otherwise we can't load said module.
2017-06-29 03:58:01 +00:00
adrian
36e5f348b0 [mips] make this compile again after all of the config changes. 2017-06-29 03:57:22 +00:00
lidl
0b1b9b9cfa Add IPSEC support to mips ERL kernel config file 2017-06-26 18:28:00 +00:00
adrian
e440fa01fb [ar71xx] migrate all of the duplicate configuration out into a shared config file.
This brings the default configurations (drivers, net80211 settings, etc) and some
of the shared configuration into std.AR_MIPS_BASE.  I haven't yet moved the
-current settings (witness, memguard, etc) into it.

This should simplify building a lot of the same test images for my MIPS AP board
development and testing.

This is a work in progress; it's not designed to be perfect!
2017-06-16 00:44:23 +00:00
kib
e2a14c603f Move struct syscall_args syscall arguments parameters container into
struct thread.

For all architectures, the syscall trap handlers have to allocate the
structure on the stack.  The structure takes 88 bytes on 64bit arches
which is not negligible.  Also, it cannot be easily found by other
code, which e.g. caused duplication of some members of the structure
to struct thread already.  The change removes td_dbg_sc_code and
td_dbg_sc_nargs which were directly copied from syscall_args.

The structure is put into the copied on fork part of the struct thread
to make the syscall arguments information correct in the child after
fork.

This move will also allow several more uses shortly.

Reviewed by:	jhb (previous version)
Sponsored by:	The FreeBSD Foundation
MFC after:	3 weeks
X-Differential revision:	https://reviews.freebsd.org/D11080
2017-06-12 21:03:23 +00:00
kib
7b6fe97487 Make struct syscall_args visible to userspace compilation environment
from machine/proc.h, consistently on all architectures.

Reviewed by:	jhb
Sponsored by:	The FreeBSD Foundation
MFC after:	3 weeks
X-Differential revision:	https://reviews.freebsd.org/D11080
2017-06-12 20:53:44 +00:00
trasz
2b87c24dc6 Remove unused tlb_write_random().
Sponsored by:	DARPA, AFRL
2017-06-05 11:04:22 +00:00