When not using LLVM libunwind, unwind.h is a generated header and a stale
copy may remain in the OBJDIR after enabling LLVM libunwind. Explicitly
remove it.
Reported by: bz
Reviewed by: bdrewery
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5019
The local build rule used to set -fvisibility=hidden and -fPIC, in
addition to -fexceptions and -D defines that had no effect.
With -fvisibility=hidden and -fPIC in STATIC_CXXFLAGS the standard
bsd.lib.mk rules are suitable for libgcc_s's C++ source.
PR: 206381
Sponsored by: The FreeBSD Foundation
The standard bsd.lib.mk rule is suitable for libgcc_s's C++ source.
The local rule had the following non-functional argument differences
or additions:
1. -DSHARED (rather than -DPIC from bsd.lib.mk)
The C++ sources don't have an #ifdef for either one.
2. -fexceptions
This is enabled by default for C++ so does not need to be set
explicitly.
3. -D__GLIBC__=3
Not used by LLVM libunwind.
4. -DElfW=__ElfN
LLVM libunwind provides its own definition.
PR: 206381
Differential Revision: The FreeBSD Foundation
It is built in libgcc_s.so and libgcc_eh.a to simplify transition.
It is enabled by default on arm64 (where we previously had no other
unwinder) and may be enabled for testing on other platforms by setting
WITH_LLVM_LIBUNWIND in src.conf(5).
Also add compiler-rt's __gcc_personality_v0 implementation for use with
the LLVM unwinder.
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D4787
We intend to replace GNU ld with LLVM's lld, and on the path to there
we'll experiment with having lld installed or linked as /usr/bin/ld.
Thus, make ld.bfd the primary install target for GNU ld, to later
facilitate making the ld link optional.
Reviewed by: davide, dim
Differential Revision: https://reviews.freebsd.org/D4790
This is not properly respecting WITHOUT or ARCH dependencies in target/.
Doing so requires a massive effort to rework targets/ to do so. A
better approach will be to either include the SUBDIR Makefiles directly
and map to DIRDEPS or just dynamically lookup the SUBDIR. These lose
the benefit of having a userland/lib, userland/libexec, etc, though and
results in a massive package. The current implementation of targets/ is
very unmaintainable.
Currently rescue/rescue and sys/modules are still not connected.
Sponsored by: EMC / Isilon Storage Division
Unfortunately filemon/meta mode tracks all indirect dependencies here
since ld(1) is reading libelf when linking in libkvm. Churn would be
reduced if this was able to be limited to direct dependencies.
Sponsored by: EMC / Isilon Storage Division
- Add a kvaddr_type to represent kernel virtual addresses instead of
unsigned long.
- Add a struct kvm_nlist which is a stripped down version of struct nlist
that uses kvaddr_t for n_value.
- Add a kvm_native() routine that returns true if an open kvm descriptor
is for a native kernel and memory image.
- Add a kvm_open2() function similar to kvm_openfiles(). It drops the
unused 'swapfile' argument and adds a new function pointer argument for
a symbol resolving function. Native kernels still use _fdnlist() from
libc to resolve symbols if a resolver function is not supplied, but cross
kernels require a resolver.
- Add a kvm_nlist2() function similar to kvm_nlist() except that it uses
struct kvm_nlist instead of struct nlist.
- Add a kvm_read2() function similar to kvm_read() except that it uses
kvaddr_t instead of unsigned long for the kernel virtual address.
- Add a new kvm_arch switch of routines needed by a vmcore backend.
Each backend is responsible for implementing kvm_read2() for a given
vmcore format.
- Use libelf to read headers from ELF kernels and cores (except for
powerpc cores).
- Add internal helper routines for the common page offset hash table used
by the minidump backends.
- Port all of the existing kvm backends to implement a kvm_arch switch and
to be cross-friendly by using private constants instead of ones that
vary by platform (e.g. PAGE_SIZE). Static assertions are present when
a given backend is compiled natively to ensure the private constants
match the real ones.
- Enable all of the existing vmcore backends on all platforms. This means
that libkvm on any platform should be able to perform KVA translation
and read data from a vmcore of any platform.
Tested on: amd64, i386, sparc64 (marius)
Differential Revision: https://reviews.freebsd.org/D3341
This is so that 'make depend' is not a required build step in these
files.
DPSRCS is overall unneeded. DPSRCS already contains SRCS, so anything
which can safely be in SRCS should be. DPSRCS is mostly just a way to
generate files that should not be linked into the final PROG/LIB. For
headers and grammars it is safe for them to be in SRCS since they will
be excluded during linking and installation.
The only remaining uses of DPSRCS are for generating .c or .o files that
must be built before 'make depend' can run 'mkdep' on the SRCS c files
list. A semi-proper example is in tests/sys/kern/acct/Makefile where a
checked-in .c file has an #include on a generated .c file. The
generated .c file should not be linked into the final PROG though since
it is #include'd. The more proper way here is just to build/link it in
though without DPSRCS. Another example is in sys/modules/linux/Makefile
where a shell script runs to parse a DPSRCS .o file that should not be
linked into the module. Beyond those, the need for DPSRCS is largely
unneeded, redundant, and forces 'make depend' to be ran. Generally,
these Makefiles should avoid the need for DPSRCS and define proper
dependencies for their files as well.
An example of an improper usage and why this matters is in usr.bin/netstat.
nl_defs.h was only in DPSRCS and so was not generated during 'make all',
but only during 'make depend'. The files including it lacked proper
depenencies on it, which forced running 'make depend' to workaround that
bug. The 'make depend' target should mostly be used for incremental build
help, not to produce a working build. This specific example was broken in
the meta build until r287905 since it does not run 'make depend'.
The gnu/lib/libreadline/readline case is fine since bsd.lib.mk has 'OBJS:
SRCS:M*.h' when there is no .depend file.
Sponsored by: EMC / Isilon Storage Division
MFC after: 1 week
Tracking these leads to situations where meta mode will consider the
file to be out of date if /bin/sh or /bin/ln are newer than the source
file. There's no reason for meta mode to do this as make is already
handling the rebuild dependency fine.
Sponsored by: EMC / Isilon Storage Division
This both avoids some dependencies on xinstall.host and allows
bootstrapping on older releases to work due to lack of at least 'install -l'
support.
Sponsored by: EMC / Isilon Storage Division
ld(1) uses the /usr/libdata/ldscripts when linking. These scripts add in the
default search paths of /lib and /usr/lib via 'SEARCH_DIR("DIR")'. These
need to be prefixed by '=' so that the --sysroot flag is respected. This
is not a problem with buildworld since the TOOLS_PREFIX is baked into the
cross-ld. However it is a problem when trying to use ld(1) with --sysroot
anywhere else as it ends up still reading /lib and /usr/lib despite --sysroot.
The default --sysroot (TARGET_SYSTEM_ROOT) is '/' for /usr/bin/ld.
I found this while building with META MODE with uses only --sysroot with
/usr/bin/ld, and found that libraries that I had not built in its sysroot
directory were leaking in. This didn't happen with ports binutils either. This
would also impact external compiler support.
Reviewed by: bapt, brooks
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D4262
The kernel dump does not store these values on the stack.
Use PCB structure to resolve PC and LR properly.
Submitted by: Wojciech Macek <wma@semihalf.com>
Reviewed by: jhb, kib
Obtained from: Semihalf
Sponsored by: Juniper Networks Inc.
Differential Revision: https://reviews.freebsd.org/D4013
In r204548 the 'rm -f ldscripts' was added likely due to reading the
conditional as 'else it is a file'. That seems unlikely though and
the more likely case is just that the directory hasn't been created yet.
Because this races with ,ssother scripts, use 'mkdir -p' which is a minimal
modification vs upstream to avoid the warning of 'File exists' if another
script creates it first. This could replace the 'test -d' as well but
then it's more unneeded change to the upstream script.
Sponsored by: EMC / Isilon Storage Division
netbsd-tests.test.mk (r289151)
- Eliminate explicit OBJTOP/SRCTOP setting
- Convert all ad hoc NetBSD test integration over to netbsd-tests.test.mk
- Remove unnecessary TESTSDIR setting
- Use SRCTOP where possible for clarity
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Divison
This now generates the files into the OBJDIR as needed. Some of the files
are installed directly from the src directory. Files which are generated
from the src directory are renamed to .in to generate them and avoid
colliding with the checked-in file when CURDIR=OBJDIR.
The remaining beforeinstall: handling still needs to be reworked as it does
not work well with staging for packaging.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
out of 'struct pcb' and into a variable-sized region after the
structure. The kgdb code currently only reads the pcb. It does not
read in the FPU save area but instead passes stack garbage as the
FPU's saved context. Fixing this would mean determining the proper
size of the area and fetching it. However, this state is not saved
for running CPUs in stoppcbs[], so the callback would also have to
know to ignore those pcbs. Instead, just remove the call since it is
of limited usefulness. It results in kgdb reporting the state of the
FPU/SIMD registers in userland, not their current values in the kernel.
In particular, it does not report the correct state for any code in
the kernel which does use the FPU and would report incorrect values
in that case.
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D3743
FILES is not used when LIBRARIES_ONLY is set, which is used to build and
install the lib32 sysroot. All of the csu files do quality as "libraries"
for this case so just undefine LIBRARIES_ONLY.
This is still better than the previous realinstall handling as it does
not hook into META_MODE properly.
Sponsored by: EMC / Isilon Storage Division
This partially reverts r270170 for lib/csu/i386 while retaining the
change for using bsd.lib.mk.
These FILES groups could go into lib/csu/Makefile.inc but I've kept them
in the Makefiles for clarity.
Sponsored by: EMC / Isilon Storage Division
The option was added only to ease the transition from GNU Binutils to
ELF Tool Chain tools, and that process is now complete (for the viable
replacements). Noting the removal in UPDATING is sufficient as we have
not shipped a release with the option.
Reviewed by: brooks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3240
ELF Tool Chain elfcopy is nearly a drop-in replacement for GNU objcopy,
but does not currently support PE output which is needed for building
x86 UEFI bits.
Add a src.conf knob to allow installing it as objcopy and set it by
default for aarch64 only, where we don't have a native binutils.
Reviewed by: bapt
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D2887
Rationale: ident(1) is useful out of RCS, lot of scripts are using ident(1) and
failing when base is built WITHOUT_RCS.
This version is:
- fully compatible with RCS 5.7 ident.
- fully compatible with RCS 5.9 ident.
- passes all ident test from GNU RCS 5.9 test suite
This version has support for: svn extension for the Keyword id (double colon and
# before last $)
Différences with GNU RCS ident:
- no long options as found in GNU RCS 5.9 (but not commented there).
- '-V' reports nothing but has been added for compatibility.
Differential Revision: https://reviews.freebsd.org/D3200
Reviewed by: pfg
macros on amd64 and i386. Move the definition to machine/param.h.
kgdb defines INKERNEL() too, the conflict is resolved by renaming kgdb
version to PINKERNEL().
On i386, correct the lowest kernel address. After the shared page was
introduced, USRSTACK no longer points to the last user address + 1 [*]
Submitted by: Oliver Pinter [*]
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Since METAMODE has been added, sys.mk loads bsd.mkopt.mk which ends load loading
bsd.own.mk which then defines SHLIBDIR before all the Makefile.inc everywhere.
This makes /lib being populated again.
Reported by: many
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796
Reviewed by: brooks imp
Clang uses compiler-rt for the code coverage runtime, and ports GCC
provides its own libgcov.
PR: 200203 (exp-run)
Sponsored by: The FreeBSD Foundation
Clang's OpenMP support will emit Intel OpenMP API library calls,
and will therefore require libiomp (or whatever name is settled on).
An up-to-date version of libgomp is included in ports or pkg GCC.
Thus, there is no reason to build base libgomp without base system GCC.
PR: 199979 (exp-run)
Reviewed by: pfg
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D2459
Initial support for FreeBSD specific routines related to counting
online processors and dynamic load balancing.
Fix "detection" of the <sys/sysctl> header which upstream seems to have
done wrong.
Obtained from: GCC pre-4.4 branch (rev. 140497; LGPLv2.1+)
This is not likely to make it into a release and is basically disabled
but should still be useful for testing.
Obtained from: GCC pre-4.3 (rev. 123494, 125542; LGPLv2.1+)
ELF toolchain readelf lacked some functionality at the time other tools
(like size, strip, nm, etc.) were switched over to the ELF toolchain
versions. That has been addressed as of the last update, so we can add
it to the list.
PR: 198950 [exp-run]
Reviewed by: bapt, imp, rpaulo
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D2156
Some users build FreeBSD as non-root in Perforce workspaces. By default,
Perforce sets files read-only unless they're explicitly being edited.
As a result, the -f argument must be used to cp in order to override the
read-only flag when copying source files to object directories. Bare use of
'cp' should be avoided in the future.
Update all current users of 'cp' in the src tree.
Reviewed by: emaste
MFC after: 1 week
Sponsored by: Spectra Logic
To be able to info pages consider installing texinfo from ports print/texinfo or
via pkg: pkg install texinfo
Differential Revision: https://reviews.freebsd.org/D1409
Reviewed by: emaste, imp (previous version)
Relnotes: yes
- Eliminate unused irqframe
- Eliminate unused saframe
- Instead of splitting r4-sp storage between the stack and switchframe,
just put all the registers in switchframe and eliminate the un_32 struct.
Submitted by: Svatopluk Kraus <onwahe@gmail.com>,
Michal Meloun <meloun@miracle.cz>
Recent binutils considered the .gnu.warning.symbol section as a fatal error when
run with --fatal-warnings which makes any users of "insecure" functions from
libc failing to build with recent binutils.
Introduce a new macro: LD_FATAL_WARNINGS=no to run ld(1) with
--no-fatal-warnings for the users of "insecure" functions
Differential Revision: https://reviews.freebsd.org/D1320
This speeds up building the directory from the bootstrap-tools stage in
buildworld as well as building from the subdirectory
Based on a patch submitted via -arch:
https://lists.freebsd.org/pipermail/freebsd-arch/2014-December/016493.html
MFC after: 1 week
Submitted by: Jia-Shiun Li <jiashiun@gmail.com>
Sponsored by: EMC / Isilon Storage Division
Prior to this change the build could fail as follows, if gperf is not
available (or fails):
- make(1) stops due to the gperf error, but an empty target file
(cfns.h) is still created
- the empty cfns.h is newer than the source cfns.gperf so it is not
regenerated on subsequent builds
- the gcc build fails (undefined reference to libc_name_p)
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Summary:
LLVM/Clang generates relocations that our binutils doesn't understand, but newer
binutils does. I got permission from the author of a series of patches to
relicense them as GPLv2 for use in FreeBSD. The upstream git hashes are:
ac2df442ac7901f00af15b272fc48b594b433713
2b95367962dc14f69d3c338c4d54195266e2e169
102890f04c44b64cf5cef4588267dd9f24086ac7
b7fcf6f6bb53b5027e111107f5416769cb9a5798
1d483afedd5a628dc84fb58d1d570f79fdfbfa7b
90aecf7a80c1cefeb45fc10a6cd02c8338e34b4c
3a71aa26df2a372a58e9c11ef9ba51fd0e83320a
727fc41e077139570ea8b8ddfd6c546b2a55627c
With the import of clang 3.5, and a few backported patches, we should be able to
move powerpc and powerpc64 to clang-as-cc soon.
Test Plan: Passes make tinderbox, so no regressions. Binaries built with clang
run on powerpc64.
Reviewers: #committers, dim
Reviewed By: dim
Differential Revision: https://reviews.freebsd.org/D1297
Obtained from: Alan Modra, upstream binutils-gdb git
MFC after: 3 weeks
Relnotes: yes
Set WITH_ELFTOOLCHAIN_TOOLS in src.conf to use the elftoolchain version
of the following tools:
* addr2line
* elfcopy (strip / mcs)
* nm
* size
* strings
Reviewed by: bapt (earlier version)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D1224
comparing it with NOCPU, which became -1 recently. While here, avoid
using it for address calculations if it is negative.
Reviewed by: jhb, adrian
MFC after: 1 week
gperf is used as a build tool for g++ and is not needed for Clang
architectures. Ports and third-party software that need it can use the
up-to-date devel/gperf port.
PR: 194103 (exp-run)
Reviewed by: bapt
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D886
the oabi is still in the tree, but it is expected this will be removed
as developers work on surrounding code.
With this commit the ARM EABI is the only supported supported ABI by
FreeBSD on ARMa 32-bit processors.
X-MFC after: never
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D876
1. 50+% of NO_PIE use is fixed by adding -fPIC to INTERNALLIB and other
build-only utility libraries.
2. Another 40% is fixed by generating _pic.a variants of various libraries.
3. Some of the NO_PIE use is a bit absurd as it is disabling PIE (and ASLR)
where it never would work anyhow, such as csu or loader. This suggests
there may be better ways of adding support to the tree. Many of these
cases can be fixed such that -fPIE will work but there is really no
reason to have it in those cases.
4. Some of the uses are working around hacks done to some Makefiles that are
really building libraries but have been using bsd.prog.mk because the code
is cleaner. Had they been using bsd.lib.mk then NO_PIE would not have
been needed.
We likely do want to enable PIE by default (opt-out) for non-tree consumers
(such as ports). For in-tree though we probably want to only enable PIE
(opt-in) for common attack targets such as remote service daemons and setuid
utilities. This is also a great performance compromise since ASLR is expected
to reduce performance. As such it does not make sense to enable it in all
utilities such as ls(1) that have little benefit to having it enabled.
Reported by: kib
Make sure everything linking to a privatelib and/or an internallib does it directly
from the OBJDIR rather than DESTDIR.
Add src.libnames.mk so bsd.libnames.mk is not polluted by libraries not existsing
in final installation
Introduce the LD* variable which is what ld(1) is expecting (via LDADD) to link to
internal/privatelib
Directly link to the .so in case of private library to avoid having to complexify
LDFLAGS.
Phabric: https://phabric.freebsd.org/D553
Reviewed by: imp, emaste
variants. This allows usable file system images (i.e. those with both a
shell and an editor) to be created with only one copy of the curses library.
Exp-run: antoine
PR: 189842
Discussed with: bapt
Sponsored by: DARPA, AFRL
nothing more. Force it to be "no" when MK_CXX is "no" to simplify
usage. It no longer also means "build g++" since we no longer have a
platform where that's interesting now that pc98 no longer needs clang
and gcc, but not g++. pc98 now just uses clang after boot2 changes.
statically linked into consumers (GDB and variants) in the base
system, and the shared library is no longer installed.
That also allows ports to be able to use a modern version of readline
PR: 162948
Reviewed by: emaste
This includes:
o All directories named *ia64*
o All files named *ia64*
o All ia64-specific code guarded by __ia64__
o All ia64-specific makefile logic
o Mention of ia64 in comments and documentation
This excludes:
o Everything under contrib/
o Everything under crypto/
o sys/xen/interface
o sys/sys/elf_common.h
Discussed at: BSDcan
(/usr/src) tree rather than the OBJDIR (/usr/obj) tree. This fixes
broken incremental builds with the canonical MAKESYSPATH workaround
of .../share/mk. This is a gross kludge.
This is currently an opt-in build flag. Once ASLR support is ready and stable
it should changed to opt-out and be enabled by default along with ASLR.
Each application Makefile uses opt-out to ensure that ASLR will be enabled by
default in new directories when the system is compiled with PIE/ASLR. [2]
Mark known build failures as NO_PIE for now.
The only known runtime failure was rtld.
[1] http://www.bsdcan.org/2014/schedule/events/452.en.html
Submitted by: Shawn Webb <lattera@gmail.com>
Discussed between: des@ and Shawn Webb [2]
This change adds tests/ directories in the source tree to create various
subdirectories in /usr/tests/ and to install placeholder Kyuafiles for
them.
the relevant hierarchies are: cddl, etc, games, gnu and secure.
The reason for this is to simplify the addition of new test programs for
utilities or libraries under any of these directories. Doing so on a
case by case basis is unnecessary and is quite an obscure process.
and finish the job. ncurses is now the only Makefile in the tree that
uses it since it wasn't a simple mechanical change, and will be
addressed in a future commit.
all timestamps in static libraries to 0 so that consecutive builds
from the same source, even on different machines, produce identical
libraries.
MFC after: 3 weeks
This targets the existing ARMv6 and ARMv7 SoCs that contain a VFP unit.
This is an optional coprocessors may not be present in all devices, however
it appears to be in all current SoCs we support.
armv6hf targets the VFP variant of the ARM EABI and our copy of gcc is too
old to support this. Because of this there are a number of WITH/WITHOUT
options that are unsupported and must be left as the default value. The
options and their required value are:
* WITH_ARM_EABI
* WITHOUT_GCC
* WITHOUT_GNUCXX
In addition, without an external toolchain, the following need to be left
as their default:
* WITH_CLANG
* WITH_CLANG_IS_CC
As there is a different method of passing float and double values to
functions the ABI is incompatible with existing armv6 binaries. To use
this a full rebuild of world is required. Because no floating point values
are passed into the kernel an armv6 kernel with VFP enabled will work with
an armv6hf userland and vice versa.
IPX was a network transport protocol in Novell's NetWare network operating
system from late 80s and then 90s. The NetWare itself switched to TCP/IP
as default transport in 1998. Later, in this century the Novell Open
Enterprise Server became successor of Novell NetWare. The last release
that claimed to still support IPX was OES 2 in 2007. Routing equipment
vendors (e.g. Cisco) discontinued support for IPX in 2011.
Thus, IPX won't be supported in FreeBSD 11.0-RELEASE.
