- When looping, check for the pending suspension. Otherwise, other
usermode thread which races with the looping one, could try to
prevent the process from stopping or exiting.
- Add missed checks for the faults from casuword*(). The code is
structured in a way which makes the loops exit if the specified
address is invalid, since both fuword() and casuword() return -1 on
the fault. But if the address is mapped readonly, the typical value
read by fuword() is different from -1, while casuword() returns -1.
Absent the checks for casuword() faults, this is interpreted as the
race with other thread and causes non-interruptible spinning in the
kernel.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Before this change state creating sequence was:
1) lock wire key hash
2) link state's wire key
3) unlock wire key hash
4) lock stack key hash
5) link state's stack key
6) unlock stack key hash
7) lock ID hash
8) link into ID hash
9) unlock ID hash
What could happen here is that other thread finds the state via key
hash lookup after 6), locks ID hash and does some processing of the
state. When the thread creating state unblocks, it finds the state
it was inserting already non-virgin.
Now we perform proper interlocking between key hash locks and ID hash
lock:
1) lock wire & stack hashes
2) link state's keys
3) lock ID hash
4) unlock wire & stack hashes
5) link into ID hash
6) unlock ID hash
To achieve that, the following hacking was performed in pf_state_key_attach():
- Key hash mutex is marked with MTX_DUPOK.
- To avoid deadlock on 2 key hash mutexes, we lock them in order determined
by their address value.
- pf_state_key_attach() had a magic to reuse a > FIN_WAIT_2 state. It unlinked
the conflicting state synchronously. In theory this could require locking
a third key hash, which we can't do now.
Now we do not remove the state immediately, instead we leave this task to
the purge thread. To avoid conflicts in a short period before state is
purged, we push to the very end of the TAILQ.
- On success, before dropping key hash locks, pf_state_key_attach() locks
ID hash and returns.
Tested by: Ian FREISLICH <ianf clue.co.za>
While the changes in r245820 are in line with the ext2 spec,
the code derived from UFS can use negative values so it is
better to relax some types to keep them as they were, and
somewhat more similar to UFS. While here clean some casts.
Some of the original types are still wrong and will require
more work.
Discussed with: bde
MFC after: 3 days
real shared object and libssp_nonshared.a.
This was the last showstopper that prevented from enabling SSP for ports
by default. portmgr@ performed a buildworld which showed no significant
breakage with this patch.
Details:
On i386 for PIC objects, gcc uses the __stack_chk_fail_local hidden
symbol instead of calling __stack_chk_fail directly [1]. This happen
not only with our gcc-4.2.1 but also with the latest gcc-4.8. If you
want the very nasty details, see [2].
OTOH the problem doesn't exist on other architectures. It also doesn't
exist with Clang as the latter will somehow manage to create the
function in the object file at compile time (contrary to only
referencing it through a symbol that will be brought in at link time).
In a perfect world, when an object file is compiled with
-fstack-protector, it will be linked into a binary or a DSO with this
same flag as well, so GCC will add libssp_nonshared.a to the linker
command-line. Unfortunately, we don't control softwares in ports and we
may have such broken DSO. This is the whole point of this patch.
You can reproduce the problem on i386 by compiling a source file into an
object file with "-fstack-protector-all -fPIE" and linking it
into a binary without "-fstack-protector".
This ld script automatically proposes libssp_nonshared.a along with the
real libc DSO to the linker. It is important to understand that the
object file contained in this library will be pulled in the resulting
binary _only if_ the linker notices one of its symbols is needed (i.e.
one of the SSP symbol is missing).
A theorical performance impact could be when compiling, but my testing
showed less than 0.1% of difference.
[1] For 32-bit code gcc saves the PIC register setup by using
__stack_chk_fail_local hidden function instead of calling
__stack_chk_fail directly. See comment line 19460 in:
src/contrib/gcc/config/i386/i386.c
[2] When compiling a source file to an object file, if you use something
which is external to the compilation unit, GCC doesn't know yet if
this symbol will be inside or outside the DSO. So it expects the
worst case and routes the symbol through the GOT, which means
additional space and extra relocation for rtld(1).
Declaring a symbol has hidden tells GCC to use the optimal route (no
GOT), but on the other hand this means the symbol has to be provided
in the same DSO (namely libssp_nonshared.a).
On i386, GCC actually uses an hidden symbol for SSP in PIC objects
to save PIC register setup, as said in [1].
PR: ports/138228
PR: ports/168010
Reviewed by: kib, kan
2011-11-14 Jim Ingham <jingham@apple.com>
* dwarf2read.c (read_type_die): Handle DW_TAG_unspecified_type.
(read_tag_unspecified_type): New function, add a type for the
DW_TAG_unspecified_type die.
Obtained from: Apple, gdb-1752
Only four specific ATA PIO commands transfer several sectors per DRQ block
(interrupt). All other ATA PIO commands transfer one sector or 512 bytes
at one time. Hardcode these exceptions in mvs(4) with ATA_CAM option.
This fixes timeout of READ LOG EXT command used by `smartctl -x /dev/adaX`.
Also it fixes timeout of DOWNLOAD_MICROCODE on `camcontrol fwdownload`.
The reference HAL pushes a config group parameter to the driver layer
to inform it which particular chip behaviour to implement.
This particular value tags it as an AR9285.
The AR9485 chip and AR933x SoC both implement LNA diversity.
There are a few extra things that need to happen before this can be
flipped on for those chips (mostly to do with setting up the different
bias values and LNA1/LNA2 RSSI differences) but the first stage is
putting this code into the driver layer so it can be reused.
This has the added benefit of making it easier to expose configuration
options and diagnostic information via the ioctl API. That's not yet
being done but it sure would be nice to do so.
Tested:
* AR9285, with LNA diversity enabled
* AR9285, with LNA diversity disabled in EEPROM
SPC-4 specification states that serial number may be property of device,
but not a specific logical unit. People reported about FC storages using
serial number in that way, making it unusable for purposes of LUN multipath
detection. SPC-4 states that designators associated with logical unit from
the VPD page 83h "Device Identification" should be used for that purpose.
Report first of them in the new attribute in such preference order: NAA,
EUI-64, T10 and SCSI name string.
While there, make GEOM DISK properly report GEOM::ident in XML output also
using d_getattr() method, if available. This fixes serial numbers reporting
for SCSI disks in `geom disk list` output and confxml.
Discussed with: gibbs, ken
Sponsored by: iXsystems, Inc.
MFC after: 2 weeks
the release/generate-release.sh script by nwhitehorn.
This script can use optional configuration file to override defaults,
making running multiple serialzied builds with different specific
configurations or architecture-specific tunings quite easy.
Sample overrideable options are included in the release.conf.sample
file.
Approved by: kib (mentor)
MFC After: 2 weeks
X-MFC-To: stable/9 only
d_getattr(). Since these drivers use disk(9) KPI and not directly GEOM, use
of that function means KPI layering violation, causing extra g_io_deliver()
call for the request.
While GEOM in general has provider opened while sending BIO_GETATTR,
GEOM DISK does not really need to open disk to read medium-unrelated
attributes for own use.
Proposed by: ken
Explicitly use GNU cpp for preprocessing.
Remove explicit debugging code.
Change some variable names to be less confusing.
Improve some comments.
Improve indentation.
PR: 162211
168785
MFC after: 2 weeks
This adds some new NetBSD releases and makes some simple formatting changes.
With this commit NetBSD and FreeBSD should have identical files.
DragonflyFBSD has the version immediately prior to this commit.
When committing to this file please try to coordinate with all three groups.
Submitted by: Alan Barrett <apb@cequrux.com>
ZFS event processing should work on R/O root filesystems
Illumos ZFS issues:
3749 zfs event processing should work on R/O root filesystems
MFC after: 2 weeks
zpool create should treat -O mountpoint and -m the same
Illumos ZFS issues:
3745 zpool create should treat -O mountpoint and -m the same
MFC after: 2 weeks
to 999.99% CPU. It still won't be aligned if you have a multithreaded
process using more than 1000% CPU (e.g. idle process on an idle 12-way
system), but 100% is a common case.
Submitted by: Jeremy Chadwick (partial)
MFC after: 1 week
- When operating on a core file (-M) and -c is specified we don't clear
the message buffer of the running system.
- If we don't have permission to clear the buffer print the error message
only. That's what Linux does in this case, where this feature was ported
from, and it ensures that the error message doesn't get lost in the noise.
Discussed with: antoine, cognet
Approved by: cognet
linux_file structure and use it instead of directly accessing td_fpop
when destroying the linux_file structure. The td_fpop pointer is not
valid when a cdevpriv destructor is run, and the type-specific close
method has already been called, so f_vnode may not be valid (and the
vnode might have been recycled without our own reference).
Tested by: Julian Stecklina <jsteckli@os.inf.tu-dresden.de>
MFC after: 1 week
