lead to access from the virtual machine to the heap of the bhyve(8) process.
Submitted by: Felix Wilhelm <fwilhelm ernw.de>
Patch by: grehan
Security: FreeBSD-SA-16:38.bhyve
This both avoids some dependencies on xinstall.host and allows
bootstrapping on older releases to work due to lack of at least 'install -l'
support.
Sponsored by: EMC / Isilon Storage Division
Some external tools just do a 'ls /dev/vmm' to figure out the bhyve virtual
machines on the host. These tools break if the devmem device nodes also
appear in /dev/vmm.
Requested by: grehan
due to a change in behavior of the 'vm_map_gpa()'.
Prior to r284539 if 'vm_map_gpa()' was called to map an address range in the
guest MMIO region then it would return NULL. This was used by the "movs"
emulation to detect if the 'src' or 'dst' operand was in MMIO space.
Post r284539 'vm_map_gpa()' started returning a non-NULL pointer even when
mapping the guest MMIO region.
Fix this by returning non-NULL only if [gaddr, gaddr+len) is entirely
within the 'lowmem' or 'highmem' regions and NULL otherwise.
Pointy hat to: neel
Reviewed by: grehan
Reported by: tychon, Ben Perrault (ben.perrault@gmail.com)
MFC after: 1 week
devmem is used to represent MMIO devices like the boot ROM or a VESA framebuffer
where doing a trap-and-emulate for every access is impractical. devmem is a
hybrid of system memory (sysmem) and emulated device models.
devmem is mapped in the guest address space via nested page tables similar
to sysmem. However the address range where devmem is mapped may be changed
by the guest at runtime (e.g. by reprogramming a PCI BAR). Also devmem is
usually mapped RO or RW as compared to RWX mappings for sysmem.
Each devmem segment is named (e.g. "bootrom") and this name is used to
create a device node for the devmem segment (e.g. /dev/vmm/testvm.bootrom).
The device node supports mmap(2) and this decouples the host mapping of
devmem from its mapping in the guest address space (which can change).
Reviewed by: tychon
Discussed with: grehan
Differential Revision: https://reviews.freebsd.org/D2762
MFC after: 4 weeks
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796
Reviewed by: brooks imp
Prior to this change both functions returned 0 for success, -1 for failure
and +1 to indicate that an exception was injected into the guest.
The numerical value of ERESTART also happens to be -1 so when these functions
returned -1 it had to be translated to a positive errno value to prevent the
VM_RUN ioctl from being inadvertently restarted. This made it easy to introduce
bugs when writing emulation code.
Fix this by adding an 'int *guest_fault' parameter and setting it to '1' if
an exception was delivered to the guest. The return value is 0 or EFAULT so
no additional translation is needed.
Reviewed by: tychon
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D2428
%rdi, %rsi, etc are inadvertently bypassed along with the check to
see if the instruction needs to be repeated per the 'rep' prefix.
Add "MOVS" instruction support for the 'MMIO to MMIO' case.
Reviewed by: neel
the 'gpa' was in the guest MMIO region. This would manifest as a segmentation
fault in 'vm_map_copyin()' or 'vm_map_copyout()' because 'vm_map_gpa()' would
return NULL for this 'gpa'.
Fix this by calling 'vm_map_gpa()' in 'vm_copy_setup' and returning a failure
if the 'gpa' cannot be mapped. This matches the behavior of 'vm_copy_setup()'
in vmm.ko.
MFC after: 1 week
Keep track of the next instruction to be executed by the vcpu as 'nextrip'.
As a result the VM_RUN ioctl no longer takes the %rip where a vcpu should
start execution.
Also, instruction restart happens implicitly via 'vm_inject_exception()' or
explicitly via 'vm_restart_instruction()'. The APIs behave identically in
both kernel and userspace contexts. The main beneficiary is the instruction
emulation code that executes in both contexts.
bhyve(8) VM exit handlers now treat 'vmexit->rip' and 'vmexit->inst_length'
as readonly:
- Restarting an instruction is now done by calling 'vm_restart_instruction()'
as opposed to setting 'vmexit->inst_length' to 0 (e.g. emulate_inout())
- Resuming vcpu at an arbitrary %rip is now done by setting VM_REG_GUEST_RIP
as opposed to changing 'vmexit->rip' (e.g. vmexit_task_switch())
Differential Revision: https://reviews.freebsd.org/D1526
Reviewed by: grehan
MFC after: 2 weeks
The new RTC emulation supports all interrupt modes: periodic, update ended
and alarm. It is also capable of maintaining the date/time and NVRAM contents
across virtual machine reset. Also, the date/time fields can now be modified
by the guest.
Since bhyve now emulates both the PIT and the RTC there is no need for
"Legacy Replacement Routing" in the HPET so get rid of it.
The RTC device state can be inspected via bhyvectl as follows:
bhyvectl --vm=vm --get-rtc-time
bhyvectl --vm=vm --set-rtc-time=<unix_time_secs>
bhyvectl --vm=vm --rtc-nvram-offset=<offset> --get-rtc-nvram
bhyvectl --vm=vm --rtc-nvram-offset=<offset> --set-rtc-nvram=<value>
Reviewed by: tychon
Discussed with: grehan
Differential Revision: https://reviews.freebsd.org/D1385
MFC after: 2 weeks
The faulting instruction needs to be restarted when the exception handler
is done handling the fault. bhyve now does this correctly by setting
'vmexit[vcpu].inst_length' to zero so the %rip is not advanced.
A minor complication is that the fault injection APIs are used by instruction
emulation code that is shared by vmm.ko and bhyve. Thus the argument that
refers to 'struct vm *' in kernel or 'struct vmctx *' in userspace needs to
be loosely typed as a 'void *'.
A nested exception condition arises when a second exception is triggered while
delivering the first exception. Most nested exceptions can be handled serially
but some are converted into a double fault. If an exception is generated during
delivery of a double fault then the virtual machine shuts down as a result of
a triple fault.
vm_exit_intinfo() is used to record that a VM-exit happened while an event was
being delivered through the IDT. If an exception is triggered while handling
the VM-exit it will be treated like a nested exception.
vm_entry_intinfo() is used by processor-specific code to get the event to be
injected into the guest on the next VM-entry. This function is responsible for
deciding the disposition of nested exceptions.
Previously the sizes were inferred indirectly based on the size of the mappings
at 0 and 4GB respectively. This works fine as long as size of the allocation is
identical to the size of the mapping in the guest's address space. However, if
the mapping is disjoint then this assumption falls apart (e.g., due to the
legacy BIOS hole between 640KB and 1MB).
it implicitly in vmm.ko.
Add ioctl VM_GET_CPUS to get the current set of 'active' and 'suspended' cpus
and display them via /usr/sbin/bhyvectl using the "--get-active-cpus" and
"--get-suspended-cpus" options.
This is in preparation for being able to reset virtual machine state without
having to destroy and recreate it.
fault on the destination buffer.
Prior to this change a page fault would be detected in vm_copyout(). This
was done after the I/O port access was done. If the I/O port access had
side-effects (e.g. reading the uart FIFO) then restarting the instruction
would result in incorrect behavior.
Fix this by validating the guest linear address before doing the I/O port
emulation. If the validation results in a page fault exception being injected
into the guest then the instruction can now be restarted without any
side-effects.
of the guest linear address space. These APIs in turn use a new ioctl
'VM_GLA2GPA' to convert the guest linear address to guest physical.
Use the new copyin/copyout APIs when emulating ins/outs instruction in
bhyve(8).
the legacy 8259A PICs.
- Implement an ICH-comptabile PCI interrupt router on the lpc device with
8 steerable pins configured via config space access to byte-wide
registers at 0x60-63 and 0x68-6b.
- For each configured PCI INTx interrupt, route it to both an I/O APIC
pin and a PCI interrupt router pin. When a PCI INTx interrupt is
asserted, ensure that both pins are asserted.
- Provide an initial routing of PCI interrupt router (PIRQ) pins to
8259A pins (ISA IRQs) and initialize the interrupt line config register
for the corresponding PCI function with the ISA IRQ as this matches
existing hardware.
- Add a global _PIC method for OSPM to select the desired interrupt routing
configuration.
- Update the _PRT methods for PCI bridges to provide both APIC and legacy
PRT tables and return the appropriate table based on the configured
routing configuration. Note that if the lpc device is not configured, no
routing information is provided.
- When the lpc device is enabled, provide ACPI PCI link devices corresponding
to each PIRQ pin.
- Add a VMM ioctl to adjust the trigger mode (edge vs level) for 8259A
pins via the ELCR.
- Mark the power management SCI as level triggered.
- Don't hardcode the number of elements in Packages in the source for
the DSDT. iasl(8) will fill in the actual number of elements, and
this makes it simpler to generate a Package with a variable number of
elements.
Reviewed by: tycho
This has not added a lot of value when debugging bhyve issues while greatly
increasing the time and space required to store the core file.
Passing the "-C" option to bhyve(8) will change the default and dump guest
memory in the core dump.
Requested by: grehan
Reviewed by: grehan
by adding an argument to the VM_SUSPEND ioctl that specifies how the virtual
machine should be suspended, viz. VM_SUSPEND_RESET or VM_SUSPEND_POWEROFF.
The disposition of VM_SUSPEND is also made available to the exit handler
via the 'u.suspended' member of 'struct vm_exit'.
This capability is exposed via the '--force-reset' and '--force-poweroff'
arguments to /usr/sbin/bhyvectl.
Discussed with: grehan@
from any context i.e., it is not required to be called from a vcpu thread. The
ioctl simply sets a state variable 'vm->suspend' to '1' and returns.
The vcpus inspect 'vm->suspend' in the run loop and if it is set to '1' the
vcpu breaks out of the loop with a reason of 'VM_EXITCODE_SUSPENDED'. The
suspend handler waits until all 'vm->active_cpus' have transitioned to
'vm->suspended_cpus' before returning to userspace.
Discussed with: grehan
New ioctls VM_ISA_ASSERT_IRQ, VM_ISA_DEASSERT_IRQ and VM_ISA_PULSE_IRQ
can be used to manipulate the pic, and optionally the ioapic, pin state.
Reviewed by: jhb, neel
Approved by: neel (co-mentor)
processor-specific VMCS or VMCB. The pending exception will be delivered right
before entering the guest.
The order of event injection into the guest is:
- hardware exception
- NMI
- maskable interrupt
In the Intel VT-x case, a pending NMI or interrupt will enable the interrupt
window-exiting and inject it as soon as possible after the hardware exception
is injected. Also since interrupts are inherently asynchronous, injecting
them after the hardware exception should not affect correctness from the
guest perspective.
Rename the unused ioctl VM_INJECT_EVENT to VM_INJECT_EXCEPTION and restrict
it to only deliver x86 hardware exceptions. This new ioctl is now used to
inject a protection fault when the guest accesses an unimplemented MSR.
Discussed with: grehan, jhb
Reviewed by: jhb
- Similar to the hack for bootinfo32.c in userboot, define
_MACHINE_ELF_WANT_32BIT in the load_elf32 file handlers in userboot.
This allows userboot to load 32-bit kernels and modules.
- Copy the SMAP generation code out of bootinfo64.c and into its own
file so it can be shared with bootinfo32.c to pass an SMAP to the i386
kernel.
- Use uint32_t instead of u_long when aligning module metadata in
bootinfo32.c in userboot, as otherwise the metadata used 64-bit
alignment which corrupted the layout.
- Populate the basemem and extmem members of the bootinfo struct passed
to 32-bit kernels.
- Fix the 32-bit stack in userboot to start at the top of the stack
instead of the bottom so that there is room to grow before the
kernel switches to its own stack.
- Push a fake return address onto the 32-bit stack in addition to the
arguments normally passed to exec() in the loader. This return
address is needed to convince recover_bootinfo() in the 32-bit
locore code that it is being invoked from a "new" boot block.
- Add a routine to libvmmapi to setup a 32-bit flat mode register state
including a GDT and TSS that is able to start the i386 kernel and
update bhyveload to use it when booting an i386 kernel.
- Use the guest register state to determine the CPU's current instruction
mode (32-bit vs 64-bit) and paging mode (flat, 32-bit, PAE, or long
mode) in the instruction emulation code. Update the gla2gpa() routine
used when fetching instructions to handle flat mode, 32-bit paging, and
PAE paging in addition to long mode paging. Don't look for a REX
prefix when the CPU is in 32-bit mode, and use the detected mode to
enable the existing 32-bit mode code when decoding the mod r/m byte.
Reviewed by: grehan, neel
MFC after: 1 month
the virtio backends.
- Add a new ioctl to export the count of pins on the I/O APIC from vmm
to the hypervisor.
- Use pins on the I/O APIC >= 16 for PCI interrupts leaving 0-15 for
ISA interrupts.
- Populate the MP Table with I/O interrupt entries for any PCI INTx
interrupts.
- Create a _PRT table under the PCI root bridge in ACPI to route any
PCI INTx interrupts appropriately.
- Track which INTx interrupts are in use per-slot so that functions
that share a slot attempt to distribute their INTx interrupts across
the four available pins.
- Implicitly mask INTx interrupts if either MSI or MSI-X is enabled
and when the INTx DIS bit is set in a function's PCI command register.
Either assert or deassert the associated I/O APIC pin when the
state of one of those conditions changes.
- Add INTx support to the virtio backends.
- Always advertise the MSI capability in the virtio backends.
Submitted by: neel (7)
Reviewed by: neel
MFC after: 2 weeks
- Add a generic routine to trigger an LVT interrupt that supports both
fixed and NMI delivery modes.
- Add an ioctl and bhyvectl command to trigger local interrupts inside a
guest. In particular, a global NMI similar to that raised by SERR# or
PERR# can be simulated by asserting LINT1 on all vCPUs.
- Extend the LVT table in the vCPU local APIC to support CMCI.
- Flesh out the local APIC error reporting a bit to cache errors and
report them via ESR when ESR is written to. Add support for asserting
the error LVT when an error occurs. Raise illegal vector errors when
attempting to signal an invalid vector for an interrupt or when sending
an IPI.
- Ignore writes to reserved bits in LVT entries.
- Export table entries the MADT and MP Table advertising the stock x86
config of LINT0 set to ExtInt and LINT1 wired to NMI.
Reviewed by: neel (earlier version)
callers treat the MSI 'addr' and 'data' fields as opaque and also lets
bhyve implement multiple destination modes: physical, flat and clustered.
Submitted by: Tycho Nightingale (tycho.nightingale@pluribusnetworks.com)
Reviewed by: grehan@
bhyve supports a single timer block with 8 timers. The timers are all 32-bit
and capable of being operated in periodic mode. All timers support interrupt
delivery using MSI. Timers 0 and 1 also support legacy interrupt routing.
At the moment the timers are not connected to any ioapic pins but that will
be addressed in a subsequent commit.
This change is based on a patch from Tycho Nightingale (tycho.nightingale@pluribusnetworks.com).
to inject edge triggered legacy interrupts into the guest.
Start using the new API in device models that use edge triggered interrupts:
viz. the 8254 timer and the LPC/uart device emulation.
Submitted by: Tycho Nightingale (tycho.nightingale@pluribusnetworks.com)
upcoming in-kernel device emulations like the HPET.
The ioctls VM_IOAPIC_ASSERT_IRQ and VM_IOAPIC_DEASSERT_IRQ are used to
manipulate the ioapic pin state.
Discussed with: grehan@
Submitted by: Tycho Nightingale (tycho.nightingale@pluribusnetworks.com)
