Normally, count=n means read(2) will be called n times on the input to dd. If
the read() returns short, as may happen when reading from a pipe, fewer bytes
will be copied from the input. With conv=sync the buffer is padded with zeros
to fill the rest of the block.
iflag=fullblock causes dd to continue reading until the block is full, so that
count=n means n full blocks are copied. This flag is compatible with illumos
and GNU dd and is used in the ZFS test suite.
Submitted by: Ryan Moeller
Reviewed by: manpages, mmacy@
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D21441
Sets the O_FSYNC flag on the output file. oflag=fsync and oflag=sync are
synonyms just as O_FSYNC and O_SYNC are synonyms. This functionality is
intended to improve portability of dd commands in the ZFS test suite.
Submitted by: Ryan Moeller
Reviewed by: manpages, mmacy@
MFC after: 1 week
Sponsored by: iXsytems, Inc.
Differential Revision: https://reviews.freebsd.org/D21422
close(2) can return errors from previous operations which should not be ignored.
PR: 229616
Submitted by: Thomas Hurst
Reported by: Thomas Hurst
Reviewed by: mmacy@
Obtained from: Ryan Moeller
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21376
The fdatasync flag performs an fdatasync(2) on the output file before closing it.
This will be useful for the ZFS test suite.
Submitted by: Ryan Moeller
Reviewed by: manpages, mmacy@
MFC after: 1 week
Sponsored by: iXSystems, Inc.
Differential Revision: https://reviews.freebsd.org/D21373
[X86] Check MI.isConvertibleTo3Addr() before calling
convertToThreeAddress in X86FixupLEAs.
X86FixupLEAs just assumes convertToThreeAddress will return nullptr
for any instruction that isn't convertible.
But the code in convertToThreeAddress for X86 assumes that any
instruction coming in has at least 2 operands and that the second one
is a register. But those properties aren't guaranteed of all
instructions. We should check the instruction property first.
Pull in r365720 from upstream llvm trunk (by Craig Topper):
[X86] Don't convert 8 or 16 bit ADDs to LEAs on Atom in FixupLEAPass.
We use the functions that convert to three address to do the
conversion, but changing an 8 or 16 bit will cause it to create a
virtual register. This can't be done after register allocation where
this pass runs.
I've switched the pass completely to a white list of instructions
that can be converted to LEA instead of a blacklist that was
incorrect. This will avoid surprises if we enhance the three address
conversion function to include additional instructions in the future.
Fixes PR42565.
This should fix assertions/segfaults when compiling certain ports with
CPUTYPE=atom.
PR: 240928
MFC after: 3 days
As of r347221 the iflib legacy interrupt mode setup assumes that drivers
perform both receive and transmit processing from the interrupt handler.
This assumption is invalid in the vmxnet3 driver, so introduce the
IFLIB_SINGLE_IRQ_RX_ONLY flag to make iflib avoid tx processing in the
interrupt handler.
PR: 239118
Reported and tested by: Juraj Lutter <otis@sk.freebsd.org>
Obtained from: marius
Reviewed by: gallatin
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D21831
Calculate binary file offset using address field, bacause software know only offset to known data, not where to load segment.
With that patch, kernel .data section can have any alignment/offset - kernel boor fine.
PR: 235391
Reviewed by: markj
MFC after: 1 month
Differential Revision: D21827
pv list lock is the main bottleneck during poudriere -j 104 and
pmap_remove_pages is the most impactful consumer. It frees chunks with the lock
held even though it plays no role in correctness. Moreover chunks are often
freed in groups, sample counts during buildkernel (0-sized frees removed):
value ------------- Distribution ------------- count
0 | 0
1 | 8
2 |@@@@@@@ 19329
4 |@@@@@@@@@@@@@@@@@@@@@@ 58517
8 | 1085
16 | 71
32 |@@@@@@@@@@ 24919
64 | 899
128 | 7
256 | 2
512 | 0
Thus:
1. batch freeing
2. move it past unlocking pv list
Reviewed by: alc (previous version), markj (previous version), kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21832
including the TCP header in the first IP packet.
Enforce this in tcp_output(). In addition make sure that at least
one byte payload fits in the TCP segement to allow making progress.
Without this check, a kernel with INVARIANTS will panic.
This issue was found by running an instance of syzkaller.
Reviewed by: jtl@
MFC after: 3 days
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D21665
This API is still young enough that I would expect no one to be dependant on
this yet... Swap the ordering while it's young to match Linux values to
potentially ease implementation of linuxolator syscall, being able to reuse
existing constants.
r347183 bumped GEOM classes to SI_ORDER_SECOND to resolve a race between
them and the initialization of devsoftc.mtx in devinit, but missed this
dependency on g_flashmap that may now lose the race against GEOM
classes/g_init.
There's a great comment that describes the situation that has also been
updated with the new ordering of GEOM classes.
Reported by: bdragon
MFC after: 4 days
This driver is for the usb phy present on rockchip SoC.
It only support RK3399 and host mode for now.
The driver expose the usb clock needed by the usb controller.
On rockchip board it seems that the value in the DTS
are not enough for reseting the chip, I don't know if
the value are really incorrect or if DELAY is not precise
enough or if the rockchip gpio driver have some "lag" of some
kind or not.
For now just add more delay.
Module resets where not implemented when rockchip clocks were commited.
Implement them.
Since all resets registers are contiguous a driver only need to give
the start offset and the number of resets. This avoid to have to declare
every resets.
PLL_MIPI is the last important PLL that we missed.
Add support for it.
Since it's one of the possible parent for TCON0 also add this clock
now that we can.
While here add some info about what video related clocks should be
enabled at boot and with what frequency.
While FreeBSD's implementation of these expect an int inside of libc, that's an
implementation detail that we can hide from the user as it's the natural
promotion of the current mode_t type and before it is used in the kernel, it's
converted back to the narrower type that's the current definition of mode_t. As
such, documenting int is at best confusing and at worst misleading. Instead add
a note that these args are variadic and as such calling conventions may differ
from non-variadic arguments.
WITHOUT_LOCAL_MODULES can be set to disable LOCAL_MODULES for native
builds. WITH_LOCAL_MODULES can be set to leave it enabled for cross
builds.
This does not use a knob in kern.opts.mk because the options framework
does not currently support options whose default varies on the build
type. I discussed a few options there with Warner (e.g. maybe having
a tri-state where the default value is "auto" and having Makefile.inc1
apply logic when MK_LOCAL_MODULES is set to "auto"), but Warner ok'd
this approach for now until a better solution is implemented.
Requested by: many
Reviewed by: imp (in person at EuroBSDCon)
Differential Revision: https://reviews.freebsd.org/D21608
The REPRODUCIBLE_BUILD option is actually managed in two separate
files. src.opts.mk governs the setting for world builds and
kern.opts.mk governs it for kernel builds. r350550 only changed the
default for world builds.
Reported by: emaste
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D21444
initialisation, which is important when the host is dealing with a
SYN flood.
This affects the computation of the initial TCP sequence number for
the client side.
This has been discussed with secteam@.
Reviewed by: gallatin@
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D21616
for RACK specific socket options.
These issues were found by a syzkaller instance.
Reviewed by: rrs@
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D21825
Extend the net backend interface with two functions, namely netbe_rx_disable()
and netbe_rx_enable(), which can be used by the net device emulators to stop
the backend from invoking the receive callback. This is useful for device
emulators, i.e., on hardware resets or to implement receive backpressure.
The mevent module has been extendede to support the addition of a disabled
event. To prevent race conditions, the net backends will start with receive
operation disabled. A follow-up patch will use the new functionalities in
the virtio-net device.
Reviewed by: jhb, markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20973
and reinserting it back with an updated key.
This is one of dependencies for the upcoming stats(3) code.
Reviewed by: cem
Obtained from: Netflix
MFC after: 2 weeks
Sponsored by: Klara Inc, Netflix
Differential Revision: https://reviews.freebsd.org/D21786
