Without this change I get lots of
warning: duplicate script for target "_FILESINS_ldscripts/elf64btsmip_fbsd.xw" ignored
message for every tree walk.
Reviewed By: imp, emaste
Differential Revision: https://reviews.freebsd.org/D18783
GNU binutils ld.bfd 2.17.50 does not support ifuncs and produces broken
binaries when ifuncs are in use. When LLD_IS_LD is default we have an
ifunc-capable system linker and can just avoid installing ld.bfd.
Reported by: theraven
Reviewed by: bz
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18340
These are needed for .ctors/.dtors and .jcr handling. The former needs
all the function pointers to be called in the correct order from the
.init/.fini section. The latter just needs to call a gcj specific function
if it exists with a pointer to the start of the .jcr section.
This is currently disabled until __dso_handle support is added.
Reviewed by: emaste
MFC after: 1 month
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17587
We're studing the possibility of deprecating sbrk(). To make it easier
we're removing unnecessicary uses in the base system. None of these
tools require sbrk(), but they agressively prefer it for no good reason.
Reviewed by: andrew
Approved by: re (kib)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D16141
Its been quite a while since the last time we updated this and since then
we have grown iconv and a bunch of complex math functions.
This only applies to the platforms which still use GCC 4.2.1 in the
toolchain.
Differential Revision: https://reviews.freebsd.org/D16289
- Change the C++ directory entries to honor --sysroot if it is set.
- Don't define CROSS_INCLUDE_DIR for the cross compiler. Instead, set
TARGET_SYSTEM_ROOT to point to WORLDTMP and always define
STANDARD_INCLUDE_DIR.
- Change STANDARD_INCLUDE_DIR and the C++ include directories to just
start with "/usr" always. The compiler will prepend the sysroot when
doing cross-builds. GCC_INCLUDE_DIR (which contains headers that ship
with the compiler such as intrinsincs rather than OS-supplied headers)
remains hardcoded to look in TOOLS_PREFIX.
Reviewed by: bdrewery (older version)
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D15127
GCC 4.2 prefixes these directories with --sysroot meaning that during
buildworld they have a double sysroot.
Reviewed by: bdrewery
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D14780
LLD_BOOTSTRAP (build) is independent of LLD_IS_LD (installed) so they
should not be based on each other.
This is related to upcoming WITH_SYSTEM_LINKER work.
Reviewed by: emaste
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D15836
Import the wrapper script from zstdgrep (written by wiz@netbsd.org)
Modify it to support more than just zstd (adding support for gzip,
lzma, xz and bzip2)
Write a simple manpage dedicated for it.
Only use that new wrapper both for gnu grep and bsd grep
Next step will be removing code related to compression format from bsdgrep
Reviewed by: kevans
Approved by: kevans
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D15193
The change makes the user and kernel address spaces on i386
independent, giving each almost the full 4G of usable virtual addresses
except for one PDE at top used for trampoline and per-CPU trampoline
stacks, and system structures that must be always mapped, namely IDT,
GDT, common TSS and LDT, and process-private TSS and LDT if allocated.
By using 1:1 mapping for the kernel text and data, it appeared
possible to eliminate assembler part of the locore.S which bootstraps
initial page table and KPTmap. The code is rewritten in C and moved
into the pmap_cold(). The comment in vmparam.h explains the KVA
layout.
There is no PCID mechanism available in protected mode, so each
kernel/user switch forth and back completely flushes the TLB, except
for the trampoline PTD region. The TLB invalidations for userspace
becomes trivial, because IPI handlers switch page tables. On the other
hand, context switches no longer need to reload %cr3.
copyout(9) was rewritten to use vm_fault_quick_hold(). An issue for
new copyout(9) is compatibility with wiring user buffers around sysctl
handlers. This explains two kind of locks for copyout ptes and
accounting of the vslock() calls. The vm_fault_quick_hold() AKA slow
path, is only tried after the 'fast path' failed, which temporary
changes mapping to the userspace and copies the data to/from small
per-cpu buffer in the trampoline. If a page fault occurs during the
copy, it is short-circuit by exception.s to not even reach C code.
The change was motivated by the need to implement the Meltdown
mitigation, but instead of KPTI the full split is done. The i386
architecture already shows the sizing problems, in particular, it is
impossible to link clang and lld with debugging. I expect that the
issues due to the virtual address space limits would only exaggerate
and the split gives more liveness to the platform.
Tested by: pho
Discussed with: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
Differential revision: https://reviews.freebsd.org/D14633
When WITH_LLD_IS_LD is set, lld's man page is installed as ld.1.gz, as
was GNU BFD's man page prior to this change.
Reported by: Tobias Kortkamp
Sponsored by: The FreeBSD Foundation
has been switched to libedit long ago, libreadline was built as an
internallib for a while and kept only for gdbtui which was broken using
libreadline.
Since gdb has been mostly deorbitted in all arches, gdbtui was only installed
on arm and sparc64, given it has been removed, gdb has been switched to use
libedit, no consumers are left for libreadline. Thus this removal
only installed on arm and sparc64.
It is the only bits that keeps us having libreadline in base
The rest of gdb can be switched to libedit and will be in another
commit
It merely wanted to use 'all' rather than 'build-tools' so just
add a build-tools target to the Makefile.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Make armv7 as a new MACHINE_ARCH.
Copy all the places we do armv6 and add armv7 as basically an
alias. clang appears to generate code for armv7 by default. armv7 hard
float isn't supported by the the in-tree gcc, so it hasn't been
updated to have a new default.
Support armv7 as a new valid MACHINE_ARCH (and by extension
TARGET_ARCH).
Add armv7 to the universe build.
Differential Revision: https://reviews.freebsd.org/D12010
Consolidate all the regular expressions to convert from MACHINE_ARCH
to MACHINE_CPUARCH into a variable and use that variable in preference
to the almost identical copies in the tree (which should have been
identical).
Differential Revision: https://reviews.freebsd.org/D11986
directories to SUBDIR.${MK_TESTS} idiom
This is being done to pave the way for future work (and homogenity) in
^/projects/make-check-sandbox .
No functional change intended.
MFC after: 1 weeks
Even though gdb and kgdb may not be removed for 12.0 on some architectures,
the notice is unconditional as these tools will likely be removed at some
point in the future when adequate replacements are available (gdb in ports
or lldb in base).
Reviewed by: emaste
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D11477
Since buildenv exports SYSROOT all of these uses will now look in
WORLDTMP by default.
sys/boot/efi/loader/Makefile
A LIBSTAND hack is no longer required for buildenv.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
All manpages in base are now compatible with mandoc(1), all roff documentation
will be relocated in the doc tree. man(1) can now use groff from the ports tree
if it needs.
Also remove checknr(1) and colcrt(1) which are only useful with groff.
Approved by: (no objections on the mailing lists)
When this option is enabled, only gdb and kgdb are installed to
/usr/libexec for use by crashinfo(8). Other bits of GDB such as
gdbserver and gdbtui are not installed. For this option to be
effective, GDB must be enabled.
Rework r317094 to re-enable GDB on all platforms but enable
GDB_LIBEXEC on platforms for which the GDB in ports is a superset of
functionality.
Reviewed by: emaste, kib
Suggested by: kib
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D10449
After r307655 MK_GDB is forced to no if MK_BINUTILS is no, and similarly
MK_GROFF is forced to no if MK_CXX is no, so we can remove nested
conditionals.
Reviewed by: bapt, brooks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8287
Prefer SRCTOP over CURDIR/../../contrib, etc. However, retain the "up
one level" instances of ../ because they are really relative to this
part of the tree and not a means to find the root of the tree. As
such, it's better to leave them since that further the goal of being
able to move directories if watned to in the future.
Differential Revision: https://reviews.freebsd.org/D9932
Sponsored by: Netflix
Silence On: arch@ (twice)
Some of the modifications from the previous summer of code has been integrated
Modification for compatibility with GNU diff output has been added
Main difference with OpenBSD:
Implement multiple GNU diff options:
* --ignore-file-name-case
* --no-ignore-file-name-case
* --normal
* --tabsize
* --strip-trailing-cr
Make diff -p compatible with GNU diff
Implement diff -l
Make diff -r compatible with GNU diff
Capsicumize diffing 2 regular files
Add a simple test suite
Approved by: AsiaBSDcon devsummit
Obtained from: OpenBSD, GSoC
Relnotes: yes
Build and install an o32 set of libraries on mips64 suitable for
running o32 binaries via COMPAT_FREEBSD32. Enable COMPAT_FREEBSD32 in
MALTA64.
Reviewed by: jmallett, imp
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D9032
If set it installs LLD as /usr/bin/ld. LLD (as of version 3.9) is not
capable of linking the world and kernel, but can self-host and link many
substantial applications. GNU ld continues to be used for the world and
kernel build, regardless of how this knob is set.
It is on by default for arm64, and off for all other CPU architectures.
Sponsored by: The FreeBSD Foundation
Hardfloat is now default (use riscv64sf as TARGET_ARCH
for softfloat).
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D8529
Compiler-rt and LLVM's libunwind provide a suitable replacement for
libgcc.a, libgcc_eh.a, and libgcc_s.so.
Remove the now-unused LLVM_LIBUNWIND block from gnu/lib/libgcc.
PR: 213480 [exp-run]
Reviewed by: brooks, ed
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8189
Summary:
The Freescale e500v2 PowerPC core does not use a standard FPU.
Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector processor
unit, which doubles as a FPU. The PowerPC SPE ABI is incompatible with the
stock powerpc ABI, so a new MACHINE_ARCH was created to deal with this.
Additionaly, the SPE opcodes overlap with Altivec, so these are mutually
exclusive. Taking advantage of this fact, a new file, powerpc/booke/spe.c, was
created with the same function set as in powerpc/powerpc/altivec.c, so it
becomes effectively a drop-in replacement. setjmp/longjmp were modified to save
the upper 32-bits of the now-64-bit GPRs (upper 32-bits are only accessible by
the SPE).
Note: This does _not_ support the SPE in the e500v1, as the e500v1 SPE does not
support double-precision floating point.
Also, without a new MACHINE_ARCH it would be impossible to provide binary
packages which utilize the SPE.
Additionally, no work has been done to support ports, work is needed for this.
This also means no newer gcc can yet be used. However, gcc's powerpc support
has been refactored which would make adding a powerpcspe-freebsd target very
easy.
Test Plan:
This was lightly tested on a RouterBoard RB800 and an AmigaOne A1222
(P1022-based) board, compiled against the new ABI. Base system utilities
(/bin/sh, /bin/ls, etc) still function appropriately, the system is able to boot
multiuser.
Reviewed By: bdrewery, imp
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D5683
The proposed change ("Fix building of llvm's unwind if gcc has been
also built") breaks the build with clang/llvm.
Tested with...
(
export SRCCONF=/dev/null WITH_CLANG=
cd gnu/lib/libgcc; make obj; make depend; make all
)
MFC after: 3 days
X-MFC with: r307689
Pointyhat to: bapt
Reported by: Jenkins, O. Hartmann <ohartman@zedat.fu-berlin.de>
Sponsored by: Dell EMC Isilon
when building gcc an unwind.h header is generate in the cc_tool directory
which is included in the CFLAGS before the path where the llvm's unwind.h file
lives
Reviewed by: emaste
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D7357
This is added to facilitate experiments building FreeBSD without
copyleft software.
If WITHOUT_GNU_DIFF is set no /usr/bin/diff or /usr/bin/diff3 will
be built.
If WITHOUT_GNU_GREP is set then BSD grep will be installed as
/usr/bin/bsdgrep or /usr/bin/grep, depending on the WITH_BSD_GREP
knob.
Reviewed by: brooks (earlier)
Sponsored by: The FreeBSD Foundation
Differential Revision: Differential Revision: https://reviews.freebsd.org/D8288
Additional patches to this file are in progress, and having each SUBDIR
entry on a separate line makes it easier to change the order in which
the patches are reviewed, tested, and applied.
GNU rcs is still available as a package:
- rcs: Latest GPLv3 GNU rcs version.
- rcs57: Copy of the latest version of GNU rcs (GPLv2) from base.
Relnotes: yes
It may not be available in certain cross build cases.
Note that this is a slight change in functionality, in that now only the
first line of the source ChangeLog file is processed. This is acceptable
as groff will be retired and we won't encounter a possibly-different
ChangeLog format.
Reported by: jhibbits
Tested by: jhibbits
The source checkout date is not particularly relevant, and this makes
groff man pages build reproducibly.
Reviewed by: bapt
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8158
In FreeBSD 11 ELF Tool Chain's elfcopy is installed as objcopy by
default, with the option to switch back to GNU objcopy by setting
WITHOUT_ELFCOPY_AS_OBJCOPY in make.conf.
We plan to remove the outdated in-tree binutils in FreeBSD 12, so
remove the temporary transition aid.
Reviewed by: brooks, imp
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7337
It also turns off dependencies (bsdinstall, bsdconfig, dpv, tzsetup).
Reviewed by: dteske
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7969
build can break when different source files create the same target
files (case-insensitivity speaking). This is the case for object
files compiled with -fpic and shared libraries. The former uses
an extension of ".So", and the latter an extension ".so". Rename
shared object files from *.So to *.pico to match what NetBSD does.
See also r305855
MFC after: 1 month
Sponsored by: Bracket Computing
Differential Revision: https://reviews.freebsd.org/D7906
The DIRDEPS_BUILD does not have a 'make includes' phase, so it would
otherwise want libc++ to be fully built/staged before building
libgcc. Using the header directly works.
MFC after: 3 days
Sponsored by: EMC / Isilon Storage Division
llvm libunwind includes a libunwind.cpp, but on ARM libunwind.S is found
first in .PATH. Rename the latter one, since it is not going to be
updated again.
Reviewed by: andrew
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7162
Instead of changing the whole course to another POSIX-permitted way
for consistency and uniformity I decide to completely ignore missing
regex fucntionality and focus on fixing bugs in what we have now,
too many small obstacles we have choicing other way, counting ports.
Corresponding libc changes are backed out in r302824.
Instead of trying to expand whole range at regcomp() stage as we do,
GNU regex allocates separate ranges [start,end] set each character
is checked against, so collation is possible and turned on for ranges here.
When something like that will be implemented or our obsoleted regex code
will be replaced to something like TRE, and in case we decide to use
collation in [a-z] ranges, all changes related to r302512 can be backed out,
but now we need consistency.
This also adds missing s/aarch64/arm64 to the sys.mk version and also
adds back armv6hf for universe since it was added to the sys.mk version
in r300438.
MFC after: 3 days
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D7159
This significantly reduces stack space requirements, and runtimes
require only native unwinding.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
This OBJS_DEPEND_GUESS is needed since each target gets its
own .depend.target.o file but also because it is spelled
.meta.target.o with WITH_META_MODE. The OBJS_DEPEND_GUESS
will apply the dependency if the required file is missing.
Also remove redundant .c files while here to avoid prolems with
targets using .ALLSRC and getting multiple source files.
Approved by: re (implicit)
Sponsored by: EMC / Isilon Storage Division
DR #289[0] came down and gcc4.2.1 was on the wrong side of history.
Partially revert GCC r42574 (just remove the error) to rectify the parse
bug to match Clang and other compliant C99 compilers.
An example declaration gcc tripped on before this fix:
void foobar(int [static 1]);
An example declaration gcc did not trip on before this fix:
void foobar(int name[static 1]);
Bump __FreeBSD_cc_version.
[0]: http://www.open-std.org/JTC1/SC22/WG14/www/docs/dr_289.htm
Reported by: allanjude
Sponsored by: EMC / Isilon Storage Division
after r298107
Summary of changes:
- Replace all instances of FILES/TESTS with ${PACKAGE}FILES. This ensures that
namespacing is kept with FILES appropriately, and that this shouldn't need
to be repeated if the namespace changes -- only the definition of PACKAGE
needs to be changed
- Allow PACKAGE to be overridden by callers instead of forcing it to always be
`tests`. In the event we get to the point where things can be split up
enough in the base system, it would make more sense to group the tests
with the blocks they're a part of, e.g. byacc with byacc-tests, etc
- Remove PACKAGE definitions where possible, i.e. where FILES wasn't used
previously.
- Remove unnecessary TESTSPACKAGE definitions; this has been elided into
bsd.tests.mk
- Remove unnecessary BINDIRs used previously with ${PACKAGE}FILES;
${PACKAGE}FILESDIR is now automatically defined in bsd.test.mk.
- Fix installation of files under data/ subdirectories in lib/libc/tests/hash
and lib/libc/tests/net/getaddrinfo
- Remove unnecessary .include <bsd.own.mk>s (some opportunistic cleanup)
Document the proposed changes in share/examples/tests/tests/... via examples
so it's clear that ${PACKAGES}FILES is the suggested way forward in terms of
replacing FILES. share/mk/bsd.README didn't seem like the appropriate method
of communicating that info.
MFC after: never probably
X-MFC with: r298107
PR: 209114
Relnotes: yes
Tested with: buildworld, installworld, checkworld; buildworld, packageworld
Sponsored by: EMC / Isilon Storage Division
Import sdiff(1) from the diff version written by Raymond Lai,
improved during GSoC 2012 by Jesse Hagewood.
Compared to the version done in during that summer of code:
- Remove the zlib frontend: zsdiff
- Compatible output (column size and separators) with GNU sdiff
Compared to GNU sdiff in ports:
- The only difference is padding using spaces vs tabs
Compared to OpenBSD and NetBSD import:
- Implement missing options (including long options) from GNU sdiff
- Improved support for the edition mode (signal handling)
- Output visually compatible with GNU sdiff: size of columns
While here import regression tests from NetBSD adapted to fit the output as
expected by GNU sdiff
Reviewed by: emaste (in part)
Obtained from: OpenBSD, NetBSD, GSoC 2012
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D5981
Differential Revision: https://reviews.freebsd.org/D6032 (diff with NetBSD version)
Differential Revision: https://reviews.freebsd.org/D6033 (diff with OpenBSD version)
Fix a related typo while here.
Note, this change results in the Kyuafile inclusion in the runtime
package, which needs to be fixed, however addresses the PR as far
as I can tell in my tests.
PR: 209114
Submitted by: ngie
Sponsored by: The FreeBSD Foundation
Modify trapframe decoding to properly analyze trapframe.
Provide method for fixup_pc. It happens, that in some kernel
functions, the GDB stack frame decoder cannot determine both
func name and frame size. This is because these functions
either contain invalid instruction, or their format does
not match standard schema. Detect that scenarios and move
PC accordingly to jump into known function schema, which
GDB is able to parse.
Obtained from: Semihalf
Sponsored by: Juniper Networks
Reviewed by: kib, zbb
Differential Revision: https://reviews.freebsd.org/D5976
This reworks the handling of common headers to just include the needed
logic rather than invoke MAKE. This avoids the problem listed in r297842
and avoids other dependency tracking issues.
Pointyhat to: bdrewery
Reported by: Nikolai Lifanov <lifanov@mail.lifanov.com>
Sponsored by: EMC / Isilon Storage Division
