o change timeout to MPSAFE callout
o restructure rule deletion to deal with locking requirements
o replace static buffer used for ipfw control operations with malloc'd storage
Sponsored by: FreeBSD Foundation
o change time to MPSAFE callout
o make debug printfs conditional on DUMMYNET_DEBUG and runtime controllable
by net.inet.ip.dummynet.debug
o make boot-time printf dependent on bootverbose
Sponsored by: FreeBSD Foundation
Special thanks to Pavlin Radoslavov <pavlin@icir.org> for testing and
fixing numerous problems.
Sponsored by: FreeBSD Foundation
Reviewed by: Pavlin Radoslavov <pavlin@icir.org>
Changes from the original implementation:
- Fragmentation is handled by the function m_fragment, which can
be called from whereever fragmentation is needed. Note that this
function is wrapped in #ifdef MBUF_STRESS_TEST to discourage non-testing
use.
- m_fragment works slightly differently from the old fragmentation
code in that it allocates a seperate mbuf cluster for each fragment.
This defeats dma_map_load_mbuf/buffer's feature of coalescing adjacent
fragments. While that is a nice feature in practice, it nerfed the
usefulness of mbuf_stress_test.
- Add two modes of random fragmentation. Chains with fragments all of
the same random length and chains with fragments that are each uniquely
random in length may now be requested.
NB: There is a known LOR on the forwarding path; this needs to be resolved
together with a similar issue in the bridge. For the moment it is
believed to be benign.
Sponsored by: FreeBSD Fondation
returned mbuf can be NULL. Check for NULL in rip_output() when
prepending an IP header. This prevents mbuf exhaustion from
causing a local kernel panic when sending raw IP packets.
PR: kern/55886
Reported by: Pawel Malachowski <pawmal-posting@freebsd.lublin.pl>
MFC after: 3 days
mac_reflect_mbuf_icmp()
mac_reflect_mbuf_tcp()
These entry points permit MAC policies to do "update in place"
changes to the labels on ICMP and TCP mbuf headers when an ICMP or
TCP response is generated to a packet outside of the context of
an existing socket. For example, in respond to a ping or a RST
packet to a SYN on a closed port.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
from queue(3).
Improve vertical compactness by using a IGMP_PRINTF() macro rather
than #ifdefing IGMP_DEBUG a large number of debugging printfs.
Reviewed by: mdodd (SLIST changes)
specific interfaces. This is required by aodvd, and may in future help us
in getting rid of the requirement for BPF from our import of isc-dhcp.
Suggested by: fenestro
Obtained from: BSD/OS
Reviewed by: mini, sam
Approved by: jake (mentor)
of bw_meter entries were processed up to one second ahead.
After an unappropriate rescheduling of some of the bw_meter
entries, the upcalls weren't delivered.
* pim_register_prepare() uses the appropriate sw_csum flag to
call ip_fragment() so the IP checksum is computed properly.
* Modify pim_register_prepare() to take care of IP packets that
don't need fragmentation.
* Add-back in_delayed_cksum() to encap_send(), because it seems it
should be there.
Submitted by: Pavlin Radoslavov <pavlin@icir.org>
binaries in /bin and /sbin installed in /lib. Only the versioned files
reside in /lib, the .so symlink continues to live /usr/lib so the
toolchain doesn't need to be modified.
segments are lost for the application. This broke, for example,
ports/benchmarks/dbs which needs the SYN segment to filter the
contents of the trace buffer for the connection it is interested in.
This patch makes the SYN segments available again. Unfortunately they
are now associated with the listening socket instead of the new one, so
a change to applications is required, but without this patch it wouldn't
work altogether.
PR: kern/45966
code has rotten a bit so that the header length is not correct at
the point when tcp_trace is called. Temporarily compute the correct
value before the call and restore the old value after. This makes
ports/benchmarks/dbs to almost work.
This is a NOP unless you compile with TCPDEBUG.
in tcp_input that leave the function before hitting the tcp_trace
function call for the TCPDEBUG option. This has made TCPDEBUG mostly
useless (and tools like ports/benchmarks/dbs not working). Add
tcp_trace calls to the return paths that could be identified in this
maze.
This is a NOP unless you compile with TCPDEBUG.
new ATMIOCOPENVCC/CLOSEVCC. This allows us to not only use UBR channels
for IP over ATM, but also CBR, VBR and ABR. Change the format of the
link layer address to specify the channel characteristics. The old
format is still supported and opens UBR channels.
Disabled by default. To enable it, the new "options PIM" must be
added to the kernel configuration file (in addition to MROUTING):
options MROUTING # Multicast routing
options PIM # Protocol Independent Multicast
2. Add support for advanced multicast API setup/configuration and
extensibility.
3. Add support for kernel-level PIM Register encapsulation.
Disabled by default. Can be enabled by the advanced multicast API.
4. Implement a mechanism for "multicast bandwidth monitoring and upcalls".
Submitted by: Pavlin Radoslavov <pavlin@icir.org>
This change allows one to specify almost the complete traffic parameters
for IPoverATM channels through the routing table. Up to now we used
4 byte DL addresses (flag, vpi, vciH, vciL). This format is still allowed.
If the address is longer, however, the 5th byte is interpreted as the
traffic class (UBR, CBR, VBR or ABR) and the remaining bytes are the
parameters for this traffic class:
UBR: 0 byte or 3 byte PCR
CBR: 3 byte PCR
VBR: 3 byte PCR, 3 byte SCR, 3 byte MBS
ABR: 3 byte PCR, 3 byte MCR, 3 byte ICR, 3 byte TBE, 1 byte NRM,
1 byte TRM, 2 bytes ADTF, 1 byte RIF, 1 byte RDF and 1 byte CDF
A script to generate the corresponding 'route add' arguments will follow soon.
sysctl:
- sysctlbyname("net.inet.ip.mfctable", ...)
- sysctlbyname("net.inet.ip.viftable", ...)
This change is needed so netstat can use sysctlbyname() to read
the data from those tables.
Otherwise, in some cases "netstat -g" may fail to report the
multicast forwarding information (e.g., if we run a multicast
router on PicoBSD).
* Bug fix: when sending IGMPMSG_WRONGVIF upcall to the multicast
routing daemon, set properly "im->im_vif" to the receiving
incoming interface of the packet that triggered that upcall
rather than to the expected incoming interface of that packet.
* Bug fix: add missing increment of counter "mrtstat.mrts_upcalls"
* Few formatting nits (e.g., replace extra spaces with TABs)
Submitted by: Pavlin Radoslavov <pavlin@icir.org>
code used to call rtrequest(RTM_DELETE, ...). This is a problem, because
the function that just has called us (route_output)
is not really happy with the route it just is creating beeing ripped out
from under it. Unfortunately we also cannot return an error from
ifa_rtrequest. Therefore mark the route just as RTF_REJECT.
check for raw IP system management operations is often (although
not always) implicit due to the namespacing of raw IP sockets. I.e.,
you have to have privilege to get a raw IP socket, so much of the
management code sitting on raw IP sockets assumes that any requests
on the socket should be granted privilege.
Obtained from: TrustedBSD Project
Product of: France
Set 31 is still special because rules belonging to it are not deleted
by the "ipfw flush" command, but must be deleted explicitly with
"ipfw delete set 31" or by individual rule numbers.
This implement a flexible form of "persistent rules" which you might
want to have available even after an "ipfw flush".
Note that this change does not violate POLA, because you could not
use set 31 in a ruleset before this change.
sbin/ipfw changes to allow manipulation of set 31 will follow shortly.
Suggested by: Paul Richards
lastest rev of the spec. Use an explicit flag for Fast Recovery. [1]
Fix bug with exiting Fast Recovery on a retransmit timeout
diagnosed by Lu Guohan. [2]
Reviewed by: Thomas Henderson <thomas.r.henderson@boeing.com>
Reported and tested by: Lu Guohan <lguohan00@mails.tsinghua.edu.cn> [2]
Approved by: Thomas Henderson <thomas.r.henderson@boeing.com>,
Sally Floyd <floyd@acm.org> [1]
Since we already had 'O_NOP' instructions which always match, all
I needed to do is allow the NOP command to have arbitrary length
(i.e. move its label in a different part of the switch() which
validates instructions).
The kernel must know nothing about comments, everything else is
done in userland (which will be described in the upcoming ipfw2.c
commit).
support matching a list of addr/mask pairs so one can write
more efficient rulesets which were not possible before e.g.
add 100 skipto 1000 not src-ip 10.0.0.0/8,127.0.0.1/8,192.168.0.0/16
The change is fully backward compatible.
ipfw2 and manpage commit to follow.
MFC after: 3 days
Should work with both regular and fast ipsec (mutually exclusive).
See manpage for more details.
Submitted by: Ari Suutari (ari.suutari@syncrontech.com)
Revised by: sam
MFC after: 1 week
