The addresses passed when reading and writing keys are always shifted
right by 5 as the memory locations are addressed in 32-byte chunks, so
the quantum needs to be 32, not 8.
MFC after: 1 month
Sponsored by: Chelsio Communications
For some reason the proc UMA zone's ctor, dtor and init functions are
instrumented, but these functions are always available through FBT.
Moreover, the probes are not part of the original Solaris proc
provider, aren't documented, have no uses (e.g., in dwatch(8)) and
have no clear use to begin with. Therefore, remove them.
Reviewed by: rpaulo
Differential Revision: https://reviews.freebsd.org/D2169
For TOE TLS, we just want to advance the send pointer to skip over the
record just sent to the TOE. The recently added sbsndptr_adv() is
sufficient for that and is cheaper.
MFC after: 1 month
Sponsored by: Chelsio Communications
- tidy up memset to have rax set earlier for small sizes
- finish the tail in memset with an overlapping store
- align memset buffers to 16 bytes before using rep stos
Sponsored by: The FreeBSD Foundation
The number of MSI IRQs still defaults to 512, but it can now be
changed at boot time via the machdep.num_msi_irqs tunable.
Reviewed by: kib, royger (older version)
Reviewed by: markj
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D17977
recent changes in spibus and allow the use of different SPI modes on
the same bus.
Reported by: ian
Sponsored by: Rubicon Communications, LLC (Netgate)
It's often useful to have a callback when an I/O takes more than a
threshold amount of time. This adds the infrastructure for periph
devices to register one.
One use-case is as a debugging aide when you need a semi-realtime
indication of an I/O outlier so you can trigger bus capture gear for
vendor analysis.
Sponsored by: Netflix, Inc
rather than the floor(). Returning the floor means that
sbttoX(Xtosbt(y)) != y for almost all values of y. In practice, this
results in a difference of at most 1 in the lsb of the sbintime_t.
This difference is meaningless for all current users of these
functions, but is important for the newly introduced sysctl conversion
routines which implicitly rely on the transformation being idempotent.
Sponsored by: Netflix, Inc
iflib_stop() was not resetting the rxq completion queue state variables.
This meant that for any driver that has receive completion queues, after a
reinit, iflib would start asking what's available on the rx side starting at
whatever the completion queue index was prior to the stop, instead of at 0.
Submitted by: pkelsey
Reported by: pkelsey
MFC after: 3 days
Sponsored by: Limelight Networks
option, we pass -1 down to listen, which causes it to use the
kern.ipc.soacceptqueue sysctl.
Approved by: mav
MFC after: 2 weeks
Sponsored by: iXsystems Inc
The off-by-one errors in 332735 weren't actual errors and were
preventing the last MSI interrupt source from being used. Instead,
the issue is that when all MSI interrupt sources were allocated, the
loop in msix_alloc() would terminate with 'msi' still set to non-null.
The only check for 'i' overflowing was in the 'msi' == NULL case, so
msix_alloc() would try to reuse the last MSI interrupt source instead
of failing.
Fix by moving the check for all sources being in use to just after the
loop.
Reviewed by: kib, markj
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D17976
netmap(4) support for vtnet(4) was incomplete and had multiple bugs.
This commit fixes those bugs to bring netmap on vtnet in a functional state.
Changelist:
- handle errors returned by virtqueue_enqueue() properly (they were
previously ignored)
- make sure netmap XOR rest of the kernel access each virtqueue.
- compute the number of netmap slots for TX and RX separately, according to
whether indirect descriptors are used or not for a given virtqueue.
- make sure sglist are freed according to their type (mbufs or netmap
buffers)
- add support for mulitiqueue and netmap host (aka sw) rings.
- intercept VQ interrupts directly instead of intercepting them in txq_eof
and rxq_eof. This simplifies the code and makes it easier to make sure
taskqueues are not running for a VQ while it is in netmap mode.
- implement vntet_netmap_config() to cope with changes in the number of queues.
Reviewed by: bryanv
Approved by: gnn (mentor)
MFC after: 3 days
Sponsored by: Sunny Valley Networks
Differential Revision: https://reviews.freebsd.org/D17916
Ensure that any time CSUM_IP_TSO or CSUM_IP6_TSO is set that the corresponding
CSUM_IP6?_TCP / CSUM_IP flags are also set.
Rather than requireing drivers to bake-in an understanding that TSO implies
checksum offloads, make it explicit.
This change requires us to move the IFLIB_NEED_ZERO_CSUM implementation to
ensure it's zeroed for TSO.
Reported by: Jacob Keller <jacob.e.keller@intel.com>
MFC after: 1 week
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D17801
r333502 removed initialization of ifc_nhwtxqs, and it's not clear
there's a need to copy it into the struct iflib_ctx at all. Use
ctx->ifc_sctx->isc_ntxqs instead.
Further, iflib_stop() did not clear the last ring in the case where
isc_nfl != isc_nrxqs (such as when IFLIB_HAS_RXCQ is set). Use
ctx->ifc_sctx->isc_nrxqs here instead of isc_nfl.
Reported by: pkelsey
Reviewed by: pkelsey
MFC after: 3 days
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D17979
Also, make the path to the example configuration file absolute.
Reviewed by: bcr
Approved by: krion (mentor, implicit), mat (mentor, implicit)
Differential Revision: https://reviews.freebsd.org/D17985
The d_off field has been added to the dirent structure recently.
Currently filesystems don't support this feature. Support has been
added and tested for zfs, ufs, ext2fs, fdescfs, msdosfs and unionfs.
A stub implementation is available for cd9660, nandfs, udf and
pseudofs but hasn't been tested.
Motivation for this feature: our usecase is for a userspace nfs server
(nfs-ganesha) with zfs. At the moment we cache direntry offsets by
calling lseek once per entry, with this patch we can get the offset
directly from getdirentries(2) calls which provides a significant
speedup.
Submitted by: Jack Halford <jack@gandi.net>
Reviewed by: mckusick, pfg, rmacklem (previous versions)
Sponsored by: Gandi.net
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D17917
Avoid touching all pages in extent_recycle for debug build.
We may have a large number of pages with *zero set (since they are populated on
demand). Only check the first page to avoid paging in all of them.
This makes it easy to compare performance with and without 'retain:true'.
Discussed with: jasone
Obtained from: Qi Wang <interwq at gwu dot edu>
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
- Adding a note to UPDATING
- Adding a note to the history section of the manpage ctm.1
- Adding a message printed to STDERR to the ctm program
This version is meant for release in FreeBSD-12.0 and should remain in
FreeBSD-12 over its life-time.
A follow-up commit will remove ctm from -CURRENT after the MFC to 12
has happened.
Approved by: imp, rgrimes, bcr (man-page)
MFC after: 3 days
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D17969
Update the AMD family 17h temperature reporting based on AMD Tech Doc 56255
OSRR, section 4.2.1.
For CPUS w/CUR_TEMP_RANGE_SEL set, scale the reported temperature into the
range -49..206; i.e., subtract 49°C.
Submitted by: gallatin@
Reported by: bcran@
Reviewed by: me (long ago)
MFC after: 22.57 seconds
Relnotes: yea
Differential Revision: https://reviews.freebsd.org/D16855
As reported, tested, and patch supplied by Johannes.
There may be future work to do to support multiple sensors, but for now, any
sensor at all is a strict improvement for Ryzen 2 systems.
PR: 228480
Submitted by: Johannes Lundberg <johalun0 AT gmail.com> (earlier version)
Reported by: deischen@, Johannes, and numerous others
MFC after: 3.72 days
Allow the location of capabilities.conf to be configured.
Also allow a per-abi syscall prefix to be configured with the
abi_func_prefix syscalls.conf variable and check syscalls against
entries in capabilities.conf with and without the prefix amended.
Take advantage of these two features to allow use shared capabilities.conf
between the default syscall vector and the freebsd32 compatability
layer. We've been inconsistent about keeping the two in sync as
evidenced by the bugs fixed in r340294. This eliminates that problem
going forward.
Reviewed by: kib
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17932
Every µcode-updater must open the cpucontrol devfs node RDWR, open a
firmware file, validate the FW file has a positive length, mmap it, etc.
De-duplicate that identical logic between every individual platform.
Also, constify references to the readonly-mapped firmware files while here.
Sponsored by: Dell EMC Isilon
This was for pre-7.0 CAM support. Neither the CAM nor the busdma
changes over the years have not been ifdef'd. The code cannot build
on 6.x anymore. Support for 6.4 ended in 2010, so remove them.
mutexes but now are converted to epoch(9) use thread-private epoch_tracker.
Embedding tracker into ifnet(9) or ifnet derived structures creates a non
reentrable function, that will fail miserably if called simultaneously from
two different contexts.
A thread private tracker will provide a single tracker that would allow to
call these functions safely. It doesn't allow nested call, but this is not
expected from compatibility KPIs.
Reviewed by: markj
document the libufs interface for fetching and storing inodes.
The undocumented getino / putino interface has been replaced
with a new getinode / putinode interface.
Convert the utilities that had been using the undocumented
interface to use the new documented interface.
No functional change (as for now the libufs library does not
do inode check-hashes).
Reviewed by: kib
Tested by: Peter Holm
Sponsored by: Netflix
They only showed up after I redefined LOCKSTAT_ENABLED to 0.
doing_lockprof in mutex.c is a real (but harmless) bug. Should the
value be non-zero it will do checks for lock profiling which would
otherwise be skipped.
state in rwlock.c is a wart from the compiler, the value can't be
used if lock profiling is not enabled.
Sponsored by: The FreeBSD Foundation
Change the assert paths in rm, rw, and sx locks to match the lock
and unlock paths. I did this for mutexes in r306346.
Reported by: Travis Lane <tlane@isilon.com>
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
