Currently the network change is simulated by link status changes.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8295
These two ALU instructions first appeared on Linux. Then, libpcap adopted
and made them available since 1.6.2. Now more platforms including NetBSD
have them in kernel. So do we.
--이 줄 이하는 자동으로 제거됩니다--
The hashtype on an outgoing mbuf reflects the correct hash on the
transmit side of the connection. If this hash persists on loopback,
the receiving RSS/PCBGROUP code will use it to look up the pcbgroup
for the transmit side, which will often not match the pcbgroup for the
receive side of the connection. This leads to TCP connections
hanging, and dropping the SYN/ACK packet. This is essentially
the same as having a hardware network card generate mbufs with an
incorrect RSS hash.
There are a number of places which can set the hash on transmit,
so the simplest fix is to simply clear the hash at loopback time.
Clearing the hash allows a new, correct hash to be calculated in
software on the receive side.
Reviewed by: jtl
Discussed with: adrian
Sponsored by: Netflix
fix build on 32 bit platforms
simplify logic in netmap_virt.h
The commands (in net/netmap.h) to configure communication with the
hypervisor may be revised soon.
At the moment they are unused so this will not be a change of API.
This commit, long overdue, contains contributions in the last 2 years
from Stefano Garzarella, Giuseppe Lettieri, Vincenzo Maffione, including:
+ fixes on monitor ports
+ the 'ptnet' virtual device driver, and ptnetmap backend, for
high speed virtual passthrough on VMs (bhyve fixes in an upcoming commit)
+ improved emulated netmap mode
+ more robust error handling
+ removal of stale code
+ various fixes to code and documentation (some mixup between RX and TX
parameters, and private and public variables)
We also include an additional tool, nmreplay, which is functionally
equivalent to tcpreplay but operating on netmap ports.
So that everyone in this task have consistent view of link state.
Reviewed by: ae
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8214
The _correct_ way to identify the supported checksum offloading and
TSO parameters is to query OID_TCP_OFFLOAD_HARDWARE_CAPABILITIES.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8088
Since if_addrlist is used only for ipfilter(4), add a macro if_addrlist
in ip_compat.h.
Reviewed by: cy
Differential Revision: https://reviews.freebsd.org/D8059
While here, prefer if_addrhead (FreeBSD) to if_addrlist (BSD compat) naming
for the interface address list in sctp_bsd_addr.c
Reviewed by: tuexen
Differential Revision: https://reviews.freebsd.org/D8051
Fragmented UDP and ICMP packets were corrupted if a firewall with reassembling
feature (like pf'scrub) is enabled on the bridge. This patch fixes corrupted
packet problem and the panic (triggered easly with low RAM) as explain in PR
185633.
bridge_pfil and bridge_fragment relationship:
bridge_pfil() receive (IN direction) packets and sent it to the firewall The
firewall can be configured for reassembling fragmented packet (like pf'scrubing)
in one mbuf chain when bridge_pfil() need to send this reassembled packet to the
outgoing interface, it needs to re-fragment it by using bridge_fragment()
bridge_fragment() had to split this mbuf (using ip_fragment) first then
had to M_PREPEND each packet in the mbuf chain for adding Ethernet
header.
But M_PREPEND can sometime create a new mbuf on the begining of the mbuf chain,
then the "main" pointer of this mbuf chain should be updated and this case is
tottaly forgotten. The original bridge_fragment code (Revision 158140,
2006 April 29) came from OpenBSD, and the call to bridge_enqueue was
embedded. But on FreeBSD, bridge_enqueue() is done after bridge_fragment(),
then the original OpenBSD code can't work as-it of FreeBSD.
PR: 185633
Submitted by: Olivier Cochard-Labbé
Differential Revision: https://reviews.freebsd.org/D7780
They are defined by NDIS spec, so the NDIS prefix.
Reviewed by: hps
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7717
Actually all OIDs defined in net/rndis.h are standard NDIS OIDs.
While I'm here, use the verbose macro name as in NDIS spec.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7679
And use new RNDIS set to configure NDIS offloading parameters.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7641
And switch MAC address query to use new RNDIS query function.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7639
While I'm here, sort the RNDIS status in ascending order.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7594
So that Hyper-V can leverage them instead of rolling its own definition.
Discussed with: hps
Reviewed by: hps
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7592
Use netisr_get_cpuid() in netisr_select_cpuid() to limit cpuid value
returned by protocol to be sure that it is not greather than nws_count.
PR: 211836
Reviewed by: adrian
MFC after: 3 days
- Move group task queue into kern/subr_gtaskqueue.c
- Change intr_enable to return an int so it can be detected if it's not
implemented
- Allow different TX/RX queues per set to be different sizes
- Don't split up TX mbufs before transmit
- Allow a completion queue for TX as well as RX
- Pass the RX budget to isc_rxd_available() to allow an earlier return
and avoid multiple calls
Submitted by: shurd
Reviewed by: gallatin
Approved by: scottl
Differential Revision: https://reviews.freebsd.org/D7393
turn them into a shared definition.
Set M_MCAST/M_BCAST appropriately upon packet reception in net80211, just
before they are delivered up to the ethernet stack.
Submitted by: rstone
The "rtentry" zone does not use UMA_ZONE_ZINIT, so it is invalid to assume the
mutex's memory will be zero. Without MTX_NEW, garbage backing memory may
trigger the "re-initializing a mutex" assertion.
PR: 200991
Submitted by: Chang-Hsien Tsai <luke.tw AT gmail.com>
and getboottimebin(9) KPI. Change consumers of boottime to use the
KPI. The variables were renamed to avoid shadowing issues with local
variables of the same name.
Issue is that boottime* should be adjusted from tc_windup(), which
requires them to be members of the timehands structure. As a
preparation, this commit only introduces the interface.
Some uses of boottime were found doubtful, e.g. NLM uses boottime to
identify the system boot instance. Arguably the identity should not
change on the leap second adjustment, but the commit is about the
timekeeping code and the consumers were kept bug-to-bug compatible.
Tested by: pho (as part of the bigger patch)
Reviewed by: jhb (same)
Discussed with: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
X-Differential revision: https://reviews.freebsd.org/D7302
