19 Commits

Author SHA1 Message Date
kevans
29870e52c0 EFIRT: SetVirtualAddressMap with 1:1 mapping after exiting boot services
This fixes a problem encountered on the Lenovo Thinkpad X220/Yoga 11e where
runtime services would try to inexplicably jump to other parts of memory
where it shouldn't be when attempting to enumerate EFI vars, causing a
panic.

The virtual mapping is enabled by default and can be disabled by setting
efi_disable_vmap in loader.conf(5).

Reviewed by:	kib (earlier version)
MFC after:	3 weeks
Differential Revision:	https://reviews.freebsd.org/D14677
2018-03-13 17:10:52 +00:00
imp
cb3889473c Prefer uintXX_t to u_intXX_t
A foolish consistency is the hobgoblin of little minds, adored by
little statesmen and philosophers and divines. With consistency a
great soul has simply nothing to do. -- Ralph Waldo Emerson
2018-03-13 16:33:00 +00:00
imp
a4533e5e02 Print the load and device path as well as BootCurrent and BootOrder
Sponsored by: Netflix
2018-03-12 21:40:24 +00:00
imp
9ee90910b8 Remove d_type from devdesc. It's not needed as we can fetch it from
d_dev->dv_type when we need it.
2018-03-12 21:39:59 +00:00
imp
c4b95a584f Use the actual struct devdesc at the start of all *_devdesc structs
The current system is fragile and requires very careful layout of all
*_devdesc structures. It also makes it hard to change the base
devdesc. Take a page from CAM and put the 'header' in all the derived
classes and adjust the code to match.

For OFW, move the iHandle h_handle out of a slot conflicting with
d_opendata. Due to quirks in the alignment rules, this worked.
However changing the code to use d_opendata storage now that it's a
pointer is hard, so just have a separate field for it.

All other cleanups were to make the *_devdesc structures match where
they'd taken some liberties that were none-the-less compatible enough
to work.
2018-03-12 21:39:49 +00:00
imp
96a5c39827 We can't use d_opendata for blkio storage.
open_disk uses d_opendata for it's own purpse. We can't store blkio
there. Fortunately, blkio is stored elsewhere and we never actually
retrieve blkio from d_opendata. Eliminate it as a source of confusion.
Eliminate all stores of d_opendata in efi since this layer doesn't own
that field.
2018-03-12 21:39:38 +00:00
imp
df01c2b09b Consolidate three copies of ZFS commands into a central location.
There's no reason to have multiple copies of lszfs and
reloadbe. Consolidate them into one location. Also ldi_get_size is the
same everywhere (except sparc64). Make it the same everywhere as the
common definition is more general and will work on spar64.
2018-02-21 15:57:36 +00:00
manu
941a6be66c efi: Only scan the BLKIO MEDIA once
Scan only the BLOCK IO MEDIA once instead of each time for each type of
device (fd, cd and hdd).
Leave the mechanism to free and reprobe all devices if one day we want
to implement a "dev rescan" thing.

Reviewed by:	imp, tsoome
MFC after:	2 weeks
Differential Revision:	https://reviews.freebsd.org/D14334
2018-02-14 18:05:37 +00:00
imp
6e1d5f978e Invent new LDR_INTERP for the loader interpreter to use. Use this in
preference to LIBFICL{,32}. LIBFICL{,32} are now always defined, but
LDR_INTERP{,32} is defined empty when building w/o forth (aka the
simple interpreter) and defined to LIBFICL{,32} when we are building
forth.
2018-02-02 15:40:49 +00:00
imp
b358fb5dee Centralize several variables.
MK_CTF, MK_SSP, MK_PROFILE, NO_PIC, and INTERNALLIB are always the
same, so set them in defs.mk. MAN= is common, so set it here too.
This removes a lot of boring repetition from the Makefiles that added
almost no value.
2018-02-02 06:32:26 +00:00
emaste
406a2e985f loader.efi: add missing EFI GUIDs
These were found during bring-up on a new arm64 platform and in an
amd64 VM.

Submitted by:	Arshan Khanifar <arshankhanifar_gmail.com>
Reviewed by:	imp
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D14036
2018-01-25 20:09:51 +00:00
imp
c319928065 Remove extra copy of bootinfo.c. It's a bit rotted copy of the one in
efi/loader.

Differential Review: https://reviews.freebsd.org/D13986
2018-01-19 19:09:17 +00:00
kevans
2832bf2f2a stand: Move sections around to fix stand/ build with ld.lld on armv7
When building loader bits, lld fails with the following error:
"ld: error: section: .dynamic is not contiguous with other relro sections"
on both ubldr and EFI loader.

Move .dynamic up to make ld.lld happy, adjust .got as necessary for ubldr.

Tested on:	OrangePi One (ld.lld, ubldr)
Tested on:	Banana Pi-M3 (ld.lld, ubldr)
Tested on:	qemu-armv7 (ld.lld, EFI)
Tested on:	qemu-armv7 (ld.bfd, EFI)
Tested on:	Raspberry Pi 2 (ld.bfd, ubldr) [manu]
Tested on:	Banana Pi-M2 (ld.bfd, ubldr) [manu]
Reviewed by:	andrew, emaste, imp
Differential Revision:	https://reviews.freebsd.org/D13942
2018-01-18 22:46:47 +00:00
imp
7f3384f4af Interact is always called with NULL. Simplify code a little by
removing this argument, and expanding when rc is NULL. This
effectively completes the back out of custom scripts for tftp booted
loaders from r269153 that was started in r292344 with the new path
tricks that obsoleted it.

Submitted by: Netflix
2017-12-19 04:05:55 +00:00
imp
3e70882dcb Move loader help file definitions to being 100% inside of loader.mk.
HELP_FILES is a loader only thing, so move it to loader.mk. Only
generate the help file if HELP_FILES is defined. Adjust Makefiles to
new convention. Fix a few cases where ${.CURDIR}/ was missing
resulting in missing bits from the help files.

Sponsored by: Netflix
2017-12-18 04:51:34 +00:00
imp
e5eb03c5be Revert r326792, r326784, r326772, r326712
Something subtle is creating problems for disk access on ubldr. Back
it out unti that can be sorted out.

Sponsored by: Netflix
2017-12-12 22:06:22 +00:00
imp
b8955e64b9 Fix regression with lua import
Don't print when we can't find a file. Copy it instead to the error
buffer. Higher level routines determine if it's appropriate to print
the error message.

Also, remove dead code (labeled bogusly lost functionality) since we
never used that functionality. Remove unused arg from interact() too.

Sponsored by: Netflix
2017-12-11 16:18:05 +00:00
imp
6cbf877860 Prefer stdint.h to inttypes.h since the added prototypes form the
latter aren't used. Prefer sys/link_elf.h to link.h so we're only
dependent on the kernel tree. The default installation of link.h just
includes this file, and any benefit from that is outweighed by the
hassle it causes. This reduces the footprint of files needed from the
system includes (or sysroot in buildworld).

Sponsored by: Netflix
2017-12-05 21:38:04 +00:00
imp
433bd38e3a Move sys/boot to stand. Fix all references to new location
Sponsored by:	Netflix
2017-11-14 23:02:19 +00:00