is in accordance with the information provided at
ftp://ftp.cs.berkeley.edu/pub/4bsd/README.Impt.License.Change
Also add $FreeBSD$ to a few files to keep svn happy.
Discussed with: imp, rwatson
Prior to this change, the addressing method wasn't getting set, and
so the LUN field could be set incorrectly in some instances.
This fix should allow for LUN numbers up to 16777215 (and return an error
for anything larger, which wouldn't fit into the flat addressing model).
Submitted by: scottl (in part)
to support PV drivers (such as xenpci), and non-adptive locking (along
with a comment about why).
This change eliminates the synchronisation problem between GENERIC and
XENHVM, which had become severely rotted in HEAD, and in 8-STABLE
included non-production kernel debugging features such as WITNESS.
However, it comes at the cost of enabling devices and options that may
not be present under Xen (such as random ethernet cards). For now, opt
for a simpler kernel configuration file rather than using nooptions/
nodevice to enumerate and eliminate them. This leads to a somewhat
larger XENHVM kernel.
This is an MFC candidate for 8-STABLE before 8.2, in order to provide
a production-worthy XENHVM kernel configuration for amd64.
Discussed with: gibbs, cperciva
Reported by: Piete Brooks <Piete.Brooks at cl.cam.ac.uk>
Sponsored by: DARPA, AFRL
MFC after: 3 days
This bug manifested itself after repeated device arrivals and
departures. The root of the problem was that the last entry in the
reply array wasn't initialized/allocated. So every time we got
around to that event, we had a bogus address.
There were a couple more problems with the code that are also fixed:
- The reply mechanism was being treated as sequential (indexed by
sc->replycurindex) even though the spec says that the driver
should use the ReplyFrameAddress field of the post queue
descriptor to figure out where the reply is. There is no
guarantee that the reply descriptors will be used in sequential
order.
- The second word of the reply post queue descriptor wasn't being
checked in mps_intr_locked() to make sure that it wasn't
0xffffffff. So the driver could potentially come across a
partially DMAed descriptor.
- The number of replies allocated was one less than the actual
size of the queue. Instead, it was the size of the number of
replies that can be used at one time. (Which is one less than
the size of the queue.)
mps.c: When initializing the entries in the reply free
queue, make sure we initialize the full number that
we tell the chip we have (sc->fqdepth), not the
number that can be used at any one time (sc->num_replies).
When allocating replies, make sure we allocate the
number of replies that we've told the chip exist,
not just the number that can be used simultaneously.
Use the ReplyFrameAddress field of the post queue
descriptor to figure out which reply is being
referenced. This is what the spec says to do, and
the spec doesn't guarantee that the replies will be
used in order.
Put a check in to verify that the reply address passed
back from the card is valid. (Panic if it isn't, we'll
panic when we try to deference the reply pointer in any
case.)
In mps_intr_locked(), verify that the second word of the
post queue descriptor is not 0xffffffff in addition to
verifying that the unused flag is not set, so we can
make sure we didn't get a partially DMAed descriptor.
Remove references to sc->replycurindex, it isn't needed
now.
mpsvar.h: Remove replycurindex from the softc, it isn't needed now.
Reviewed by: scottl
camcontrol.c: In buildbusdevlist(), don't attempt to get call
getdevid() for an unconfigured device, even when the
verbose flag is set. The cam_open_btl() call will almost
certainly fail.
Probe for the buffer size when issuing the XPT_GDEV_ADVINFO
CCB. Probing for the buffer size first helps us avoid
allocating the maximum buffer size when it really may not
be necessary. This also helps avoid errors from
cam_periph_mapmem() if we attempt to map more than MAXPHYS.
cam_periph.c: In cam_periph_mapmem(), if the XPT_GDEV_ADVINFO CCB
shows a bufsiz of 0, we don't have anything to map,
so just return.
Also, set the maximum mapping size to MAXPHYS
instead of DFLTPHYS for XPT_GDEV_ADVINFO CCBs,
since they don't actually go down to the hardware.
scsi_pass.c: Don't bother mapping the buffer in XPT_GDEV_ADVINFO
CCBs if bufsiz is 0.
functionality is the same, a difference is that the DS1775 has a better
precision than the LM75. But we do not use it in our setup. Make the
LM75 work the same as the DS1775.
Fix a typo in device_set_desc.
Tested by: Paul Mather <paul at gromit dlib vt edu>
Approved by: nwhitehorn (mentor)
pointer where data is to be returned by ibask() (currently unimplemented),
while __retval holds the value returned by the libgpib ibfoo() functions.
The confusion resulted in the ibfoo() functions returning an uninitialized
value except in situations where the GPIB activity has been terminated
abnormally.
MFC after: 3 days
in crt1.o. On other architectures crtbrand.c is included from crt1.c,
but that's not a C source code file on ia64. Instead it is compiled
separately and included in crt1.o using incremental linking.
Tested by: dim (previous version)
Approved by: kib (mentor)
"synchronize synopsis and usage; "-l", "-r", "-s" and "-x" are mutually
exclusive; while here, slightly improve spacing in the source code
so it fits on a 80-column display again.
diff greatly improved by martynas@"
Obtained from: sobrado@OpenBSD.org
vmspace_fork and vm_map_wire that would lead to "vm_fault_copy_wired: page
missing" panics. While faulting in pages for a map entry that is being
wired down, mark the containing map as busy. In vmspace_fork wait until the
map is unbusy, before we try to copy the entries.
Reviewed by: kib
MFC after: 5 days
Sponsored by: Isilon Systems, Inc.
the existing file descriptor. Instead, let dup2() atomically close the
old file descriptor when assigning the newly opened file to the same
descriptor. This closes a race in a multithreaded application where a
concurrent open() could allocate the existing file descriptor in between
the calls to close() and dup2().
PR: threads/79887
Submitted by: Dmitrij Tejblum tejblum of yandex-team.ru
Reviewed by: davidxu
MFC after: 1 week
lock from pmap_extract_and_hold(), it didn't take into account that
pmap_pte_quick() sometimes requires the page queues lock to be held.
This change reimplements pmap_extract_and_hold() such that it no
longer uses pmap_pte_quick(), and thus never requires the page queues
lock.
For consistency, adopt the same idiom as used by the new
implementation of pmap_extract_and_hold() in pmap_extract() and
pmap_mincore(). It also happens to make these functions shorter.
Fix a style error in pmap_pte().
Reviewed by: kib@
experimental NFSv4 server to a NFSv4 client when delegations are not
being issued, even if the client advertises a callback path.
This avoids a problem where a Linux client advertises a
callback path that doesn't work, due to a firewall, and then
times out an Open attempt before the FreeBSD server gives up
its callback connection attempt. (Suggested by
drb at karlov.mff.cuni.cz to fix the Linux client problem that
he reported on the fs-stable mailing list.)
The server should probably have
a 1sec timeout on callback connection attempts when there are
no delegations issued to the client, but that patch will require
changes to the krpc and this serves as a work around until then.
Tested by: drb at karlov.mff.cuni.cz
MFC after: 5 days
- remove unused code in mips/rmi/xlr_pci.c
- remove unused variable in mips/rmi/dev/nlge/if_nlge.c
- fix reference to old function in mips/mips/pmap.c
Reported by: Prabhath Raman (prabhath at netlogicmicro com)
Implement uma_small_alloc() and uma_small_free() for mips that allocates
pages from direct mapped memory. Uses the same mechanism as the page table
page allocator, so that we allocate from KSEG0 in 32 bit, and from XKPHYS
on 64 bit.
Reviewed by: alc, jmallett
It is possible a lower priority thread lending priority to higher priority
thread, in old code, it is ignored, however the lending should always be
recorded, add field td_lend_user_pri to fix the problem, if a thread does
not have borrowed priority, its value is PRI_MAX.
MFC after: 1 week
The #define BUILTIN was for building as a csh (not tcsh) builtin.
Given that csh was replaced by tcsh years ago there is no point in keeping
this.
The #define SHELL is for building as an sh builtin and is in active use.
This commit does not change the /bin/sh and /usr/bin/printf binaries.
while on i386 we have MAX_BPAGES=512. Implement this difference via
'#ifdef __i386__'.
With this commit, the i386 and amd64 busdma_machdep.c files become
identical; they will soon be replaced by a single file under sys/x86.
no-op currently, since FreeBSD/amd64 doesn't have (paravirtualized) Xen
support, but if/when that support is ever added we'll want this, and
until then it's harmless.
snmp_vacm modules and minimal user/view configurations needed to for
the modules to work properly.
Sponsored by: The FreeBSD Foundation
Reviewed by: philip@ (mostly)
Approved by: philip@
re-arming the watchdog timeout.
Sponsored by: Sandvine Incorporated
Submitted by: Mark Johnston <mjohnston at sandvine dot com>
Reviewed by: des
MFC after: 10 days
Sponsored by: The FreeBSD Foundation (the SNMPv3 bits), Google Summer of Code 2005
Reviewed by: philip@ (mostly), bz@ (earlier version based on p4 ch124545)
Approved by: philip@
