controller.
The gpiobus is responsible to keep track of the used pins and serialize
the access to pins.
Some of these features are important to devices that do not descend
directly from gpiobus and as such cannot make use of its features (one
classic example is gpioc that is attached to the GPIO controller and could
not, until now, make use of the gpiobus locking).
this codepath.)
(1<<30) is documented as BLM_PCH_OVERRIDE_ENABLE, which the current
i915 driver in Linux only sets for broadwell chips.
This fixes the backlight control on the Lenovo X230.
Approved by: kib
Obtained from: Linux 7aa1e7f06d6ea1bce3b27630d50769d13da28b1a
Add separate software Tx queue limit for non-TCP traffic to make total
limit higher and avoid local drops of TCP packets because of no
backpressure.
There is no point to make non-TCP limit high since without backpressure
UDP stream easily overflows any sensible limit.
Split early drops statistics since it is better to have separate counter
for each drop reason to make it unabmiguous.
Add software Tx queue high watermark. The information is very useful to
understand how big queues grow under traffic load.
Sponsored by: Solarflare Communications, Inc.
Approved by: gnn (mentor)
Most likely is was just memory leak on the error handling path since
typically efsys_mem_t is filled in by zeros on allocation.
Sponsored by: Solarflare Communications, Inc.
Approved by: gnn (mentor)
sfxge_dma_alloc() calls bus_dmamem_alloc() with BUS_DMA_ZERO flag, so
allocated memory is already filled in by zeros
Sponsored by: Solarflare Communications, Inc.
Approved by: gnn (mentor)
Remove the first member alignment to cacheline since it is nop.
Use __aligned() for the whole structure to make sure that the structure
size is cacheline aligned.
Remove lock alignment to make the structure smaller and fit all members
used on event queue processing into one cacheline (128 bytes) on x86-64.
The lock is obtained as well from different context when event queue
statistics are retrived from sysctl context, but it is infrequent.
Reorder members to avoid padding and go in usage order on event
processing.
As the result all structure members used on event queue processing fit
into exactly one cacheline (128 byte) now.
Sponsored by: Solarflare Communications, Inc.
Approved by: gnn (mentor)
In fact the pointer is used only if more than one TXQ is processed in
one interrupt.
It is used (read-write) on completion path only.
Also it makes the first part of the structure smaller and it fits now
into one 128byte cache line. So, TXQ structure becomes 128 bytes smaller.
Sponsored by: Solarflare Communications, Inc.
Approved by: gnn (mentor)
doesn't get truncated to 32 bits.
Without this, 3x3 NICs transmitting at an MCS rate whose rix (rate
index) in the rate table is > 31 end up returning errors, as the
sample rate code doesn't think the rate is set in the rate table.
Tested:
* AR9380, STA, speaking 3x3 to an AP
Without this change a local attacker could trigger a panic by
tricking the kernel into accessing undefined kernel memory.
We would like to acknowledge Francisco Falcon from CORE Security
Technologies who discovered the issue and reported to the
FreeBSD Security Team.
More information can be found at CORE Security's advisory at:
http://www.coresecurity.com/content/freebsd-kernel-multiple-vulnerabilities
This is an errata candidate for releng/10.1 and releng/9.3. Earlier
releases are not affected.
Reported by: Francisco Falcon from CORE Security Technologies
Security: CVE-2014-0998
Reviewed by: dumbbell
MFC after: 3 days
Also, split power_suspend into power_suspend and power_suspend_early.
power_suspend_early is called before the userland is frozen.
power_suspend is called after the userland is frozen.
Currently only VT switching is hooked to power_suspend_early.
This is needed because switching away from X server requires its
cooperation, so obviously X server must not be frozen when that happens.
Freezing userland during ACPI suspend is useful because not all drivers
correctly handle suspension concurrent with other activity. This is
especially applicable to drivers ported from other operating systems
that suspend all software activity between placing drivers and hardware
into suspended state.
In particular drm2/radeon (radeonkms) depends on the described
procedure. The driver does not have any internal synchronization
between suspension activities and processing of userland requests.
Many thanks to kib for the code that allows to freeze and thaw all
userland threads.
Note that ideally we also need to park / inhibit (non-special) kernel
threads as well to ensure that they do not call into drivers.
MFC after: 17 days
suspend/resume
The goal is to avoid that the vt(4) resume happens before the video
display is resumed. The original patch was provided by Andriy Gapon.
This new patch registers the handlers in vt_upgrade(). This is done
once, thanks to the VDF_ASYNC flag. I abused this flag because it was
already abused by the keyboard allocation. The event handlers then call
the backend if it provides callbacks for suspend/resume.
Differential Revision: https://reviews.freebsd.org/D1004
On behalf of: dumbbell
MFC after: 2 weeks
Previously, the driver resets the device and abandon the requests that
are caught in flight when the dump was initiated. This was problematic
if the system is resumed after the dump is completed.
While that is probably not the typical action, it is simple to rework
the driver to very likely have the device usable after the dump without
making it more likely for the dump to fail. The in flight requests are
simply queued for completion once the dump is finished.
Requested by: markj
MFC after: 1 month
the no-longer existant sb_cc sockbuf member.
- Use sbavail() instead of sbused() in t4_soreceive_ddp() to match the
usage in soreceive_stream() on which it is based.
Discussed with: glebius (2)
for i386, and from the code inspection, nothing in the
arm/mips/sparc64 implementations depends on it.
Discussed with: imp, nwhitehorn
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
The newer boards don't have the response field that indicates
whether the SCSI status byte is present. You have to just look to
see whether it is non-zero.
The code was looking to see whether the sense length was valid
before propagating the SCSI status byte (and sense information) up
the stack. With a status like Reservation Conflict, there is no
sense information, only the SCSI status byte. So it wasn't getting
correctly returned.
isp.c:
In isp_intr(), if we are on a 2400 or 2500 type board and
get a response, look at the actual contents of the
SCSI status value and set the RQSF_GOT_STATUS flag
accordingly so that return any SCSI status value we get. The
RQSF_GOT_SENSE flag will get set later on if there is
actual sense information returned.
Submitted by: ken
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1112791 on 2015/01/15
If the user sends an XPT_RESET_DEV CCB, make sure to reset the
Fibre Channel Command Reference Number if we're running on a FC
controller.
We send a SCSI Target Reset when we get this CCB, and as a result
need to reset the CRN to 1 on the next command.
isp_freebsd.c:
In the XPT_RESET_DEV implementation in isp_action(), reset
the CRN if we're on a FC controller.
Submitted by: ken
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1112787 on 2015/01/15
Fix SCSI status byte reporting on 4Gb and 8Gb Qlogic boards.
The newer boards don't have the response field that indicates
whether the SCSI status byte is present. You have to just look to
see whether it is non-zero.
The code was looking to see whether the sense length was valid
before propagating the SCSI status byte (and sense information) up
the stack. With a status like Reservation Conflict, there is no
sense information, only the SCSI status byte. So it wasn't getting
correctly returned.
isp.c:
In isp_intr(), if we are on a 2400 or 2500 type board and
get a response, look at the actual contents of the
SCSI status value and set the RQSF_GOT_STATUS flag
accordingly so that return any SCSI status value we get. The
RQSF_GOT_SENSE flag will get set later on if there is
actual sense information returned.
Submitted by: ken
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1112791 on 2015/01/15
systems with more than 4GB of physical memory.
To remotely debug the system 'stealthy' which has a kernel
with this change installed and firewire properly configured:
% fwcontrol -m stealthy (or stealthy's firewire EUI64)
% kgdb kernel /dev/fwmem0.0
sys/dev/firewire/fwohci.c:
Rather than hard code the upper limit for hw based
automatic responses to remote DMA requests at 4GB,
program the hardware using Maxmem, the page number
one higher than the highest physical page detected
in the system.
While here, garbage collect more useless splfw()
calls.
Submitted by: gibbs
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1110994 on 2015/01/06
asynchronous remote dma request (DMA request that the
hardware cannot automatically handle).
sys/dev/firewire/firewire.c
In fw_rcv(), add missing early return in the error
path for DMA requests to unregistered regions.
Submitted by: gibbs
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1110993 on 2015/01/06
