As of r295661 elfcopy supports PE format for EFI boot binaries and is a
viable objcopy implementation for the base system and ports.
The (temporary) src.conf knob WITHOUT_ELFCOPY_AS_OBJCOPY knob may be set
to obtain the GNU version if necessary.
PR: 207091 [exp-run]
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
It is built in libgcc_s.so and libgcc_eh.a to simplify transition.
It is enabled by default on arm64 (where we previously had no other
unwinder) and may be enabled for testing on other platforms by setting
WITH_LLVM_LIBUNWIND in src.conf(5).
Also add compiler-rt's __gcc_personality_v0 implementation for use with
the LLVM unwinder.
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D4787
for libraries that follow the soft float ABI. It's only supported on
armv6 as a transition to the new hard float ABI, so mark as broken
everywhere else.
LLDB is usable for userland core file and live debugging on amd64, and
for userland core file debugging on arm64. In general it works at least
as well on FreeBSD as our in-tree gdb version, so enable it by default
to allow for broader use and testing.
An LLDB tutorial is available at http://lldb.llvm.org/tutorial.html, and
a table mapping GDB commands to LLDB commands can be found at
http://lldb.llvm.org/lldb-gdb.html .
LLDB also has some level of support for FreeBSD on arm, mips, i386,
and powerpc, but is not yet ready to have them enabled by default.
Reviewed by: gnn
Relnotes: Yes
RISC-V is a new ISA designed to support computer research and education, and
is now become a standard open architecture for industry implementations.
This is a minimal set of changes required to run 'make kernel-toolchain'
using external (GNU) toolchain.
The FreeBSD/RISC-V project home: https://wiki.freebsd.org/riscv.
Reviewed by: andrew, bdrewery, emaste, imp
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
Differential Revision: https://reviews.freebsd.org/D4445
This is because the previous version was very obscure about the fact
that despite having Clang "on by default" for architectures such as powerpc, it
does not actually build due to the GCC it uses not having C++11 support.
Using an external compiler that supports C++11 does allow this to work.
This whole block should be rethought more given "on by default" is not
really default without extra work which could actually be surprising for
why Clang is showing up when using a newer GCC.
Sponsored by: EMC / Isilon Storage Division
For most cases they are equivalent, but BINUTILS_BOOTSTRAP is a
BROKEN_OPTION on arm64 as the in-tree GNU binutils do not support it,
so we need a separate internal flag for ELF Tool Chain.
Reviewed by: andrew, brooks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3381
We previously disabled CLANG_FULL on (little-endian) ARM because the
build failed. This is no longer the case and as of Clang 3.5 we cannot
build any part of the in-tree Clang with in-tree GCC, so it's no longer
necessary to disable CLANG_FULL.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D2525
ELF Tool Chain elfcopy is nearly a drop-in replacement for GNU objcopy,
but does not currently support PE output which is needed for building
x86 UEFI bits.
Add a src.conf knob to allow installing it as objcopy and set it by
default for aarch64 only, where we don't have a native binutils.
Reviewed by: bapt
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D2887
really need it can find it in the devel/fmake port or pkg install fmake.
Note: This commit is orthogonal to the question 'can we fmake buildworld'.
Differential Revision: https://reviews.freebsd.org/D2840
This change among other things improve search capabilities over the manpages
allowing fine grain query.
A new build option WITHOUT_MANDOCDB has been added to keep the ancient version
of the database and the tools. The plan is to entirely remove this option before
11.0-RELEASE.
Differential Revision: https://reviews.freebsd.org/D2603
pwrite(2) syscalls are wrapped to provide compatibility with pre-7.x
kernels which required padding before the off_t parameter. The
fcntl(2) contains compatibility code to handle kernels before the
struct flock was changed during the 8.x CURRENT development. The
shims were reasonable to allow easier revert to the older kernel at
that time.
Now, two or three major releases later, shims do not serve any
purpose. Such old kernels cannot handle current libc, so revert the
compatibility code.
Make padded syscalls support conditional under the COMPAT6 config
option. For COMPAT32, the syscalls were under COMPAT6 already.
Remove WITHOUT_SYSCALL_COMPAT build option, which only purpose was to
(partially) disable the removed shims.
Reviewed by: jhb, imp (previous versions)
Discussed with: peter
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
dependent functions have been implemented, but this is enough for world.
Differential Revision: https://reviews.freebsd.org/D2132
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
only adds support for kernel-toolchain, however it is expected further
changes to add kernel and userland support will be committed as they are
reviewed.
As our copy of binutils is too old the devel/aarch64-binutils port needs
to be installed to pull in a linker.
To build either TARGET needs to be set to arm64, or TARGET_ARCH set to
aarch64. The latter is set so uname -p will return aarch64 as existing
third party software expects this.
Differential Revision: https://reviews.freebsd.org/D2005
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
These tools are now from the ELF Tool Chain project:
* addr2line
* elfcopy (strip)
* nm
* size
* strings
The binutils versions are available by setting in src.conf:
WITHOUT_ELFTOOLCHAIN_TOOLS=yes
Thanks to antoine@ for multiple exp-runs and diagnosing many of the
failures.
PR: 195561 (ports exp-run)
Sponsored by: The FreeBSD Foundation
support, make this explicit in src.opts.mk, by updating the default
settings.
The defaults become as follows:
* If the host compiler is not C++11 capable, use gcc and disable clang.
* On x86, enable clang, make it the default cc, and disable gcc.
* On little-endian ARM, enable clang, but not the full build, make it
the default cc, and disable gcc.
* On PowerPC, enable clang, but enable gcc and make that the default cc.
* On everything else, use gcc, and disable clang.
This can be amended later, if we get e.g. sparc64 or big-endian ARM
working with clang.
Reviewed by: imp, brooks
Differential Revision: https://reviews.freebsd.org/D1294
Set WITH_ELFTOOLCHAIN_TOOLS in src.conf to use the elftoolchain version
of the following tools:
* addr2line
* elfcopy (strip / mcs)
* nm
* size
* strings
Reviewed by: bapt (earlier version)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D1224
issue. lib/atf isn't a prereq_lib, since it isn't required for other
libraries to build. Remove it. The old kludge of always building it
had effectively been retired. Since we don't want to build the
libraries with the tests when we're bootstrapping, invent
MK_TESTS_SUPPORT which normally defaults to the current MK_TESTS
value, except when explicitly defined. Make lib/atf depend on it being
yes. When building the libraries set MK_TESTS to no, and
MK_TESTS_SUPPORT to the current value of MK_TESTS so that later stages
of the build work correctly. This should fix (and does for me)
people's issues with parallel builds racing between lib/atf and
libexec/atf. Since lib/atf is built during the libraries phase, the
race disappears.
userland defaults to no. This caused issues for the automated option
documenation script. Turns out, this isn't used in userland at all, so
just remove it from here.
for i386/amd64. Rather, it only works on i386/amd64 and should only be
built there. Rather than change the default based on which
architecutre, do things more directly by only building it on
i386/amd64 and having it always on. This is how we handle other
options that are relevant only for a few architectures.
the oabi is still in the tree, but it is expected this will be removed
as developers work on surrounding code.
With this commit the ARM EABI is the only supported supported ABI by
FreeBSD on ARMa 32-bit processors.
X-MFC after: never
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D876
many thanks for their continued support of FreeBSD.
While I'm there, also implement a new build knob, WITHOUT_HYPERV to
disable building and installing of the HyperV utilities when necessary.
The HyperV utilities are only built for i386 and amd64 targets.
This is a stable/10 candidate for inclusion with 10.1-RELEASE.
Submitted by: Wei Hu <weh microsoft com>
MFC after: 1 week
This is a redo of r267424, which was reverted in r267432 because it broke
"make buildworld" from FreeBSD 9.x. This issue has been resolved and this
change is still "make tinderbox" clean.
