more topology change done that may require its attention. Add few missing
g_do_wither() calls in respective places to signal it.
This fixes potential infinite loop here when some provider is withered, but
still opened or connected for some reason and so can not be destroyed. For
example, see r227009 and r227510.
It includes three parts:
1) Modifications to CAM to detect media media changes and report them to
disk(9) layer. For modern SATA (and potentially UAS) devices it utilizes
Asynchronous Notification mechanism to receive events from hardware.
Active polling with TEST UNIT READY commands with 3 seconds period is used
for incapable hardware. After that both CD and DA drivers work the same way,
detecting two conditions: "NOT READY: Medium not present" after medium was
detected previously, and "UNIT ATTENTION: Not ready to ready change, medium
may have changed". First one reported to disk(9) as media removal, second
as media insert/change. To reliably receive second event new
AC_UNIT_ATTENTION async added to make UAs broadcasted to all periphs by
generic error handling code in cam_periph_error().
2) Modifications to GEOM core to handle media remove and change events.
Media removal handled by spoiling all consumers attached to the provider.
Media change event also schedules provider retaste after spoiling to probe
new media. New flag G_CF_ORPHAN was added to consumers to reflect that
consumer is in process of destruction. It allows retaste to create new
geom instance of the same class, while previous one is still dying.
3) Modifications to some GEOM classes: DEV -- to report media change
events to devd; VFS -- to handle spoiling same as orphan to prevent
accessing replaced media. PART class already handles spoiling alike to
orphan.
Reviewed by: silence on geom@ and scsi@
Tested by: avg
Sponsored by: iXsystems, Inc. / PC-BSD
MFC after: 2 months
r162200 delays provider orphanization until all running requests complete,
to workaround broken orphan() method implementation in some classes.
r215687 removes persistent periodic (10Hz) event thread wake ups.
Together these changes can indefinitely delay orphanization until some
other event wake up the event thread. One consequence of this is inability
of CAM to destroy device disconnected when busy and, as consequence, create
new one after reconnection.
While the best solution would be to revert r162200, it is not easy, as
some classes still look broken in that way. Instead conditionally wake up
event thread if there are some providers waiting for orphanization.
MFC after: 1 week
DEVFS, and make it accessible via the diskinfo utility.
Extend GEOM's generic attribute query mechanism into generic disk consumers.
sys/geom/geom_disk.c:
sys/geom/geom_disk.h:
sys/cam/scsi/scsi_da.c:
sys/cam/ata/ata_da.c:
- Allow disk providers to implement a new method which can override
the default BIO_GETATTR response, d_getattr(struct bio *). This
function returns -1 if not handled, otherwise it returns 0 or an
errno to be passed to g_io_deliver().
sys/cam/scsi/scsi_da.c:
sys/cam/ata/ata_da.c:
- Don't copy the serial number to dp->d_ident anymore, as the CAM XPT
is now responsible for returning this information via
d_getattr()->(a)dagetattr()->xpt_getatr().
sys/geom/geom_dev.c:
- Implement a new ioctl, DIOCGPHYSPATH, which returns the GEOM
attribute "GEOM::physpath", if possible. If the attribute request
returns a zero-length string, ENOENT is returned.
usr.sbin/diskinfo/diskinfo.c:
- If the DIOCGPHYSPATH ioctl is successful, report physical path
data when diskinfo is executed with the '-v' option.
Submitted by: will
Reviewed by: gibbs
Sponsored by: Spectra Logic Corporation
Add generic attribute change notification support to GEOM.
sys/sys/geom/geom.h:
Add a new attrchanged method field to both g_class
and g_geom.
sys/sys/geom/geom.h:
sys/geom/geom_event.c:
- Provide the g_attr_changed() function that providers
can use to advertise attribute changes.
- Perform delivery of attribute change notifications
from a thread context via the standard GEOM event
mechanism.
sys/geom/geom_subr.c:
Inherit the attrchanged method from class to geom (class instance).
sys/geom/geom_disk.c:
Provide disk_attr_changed() to provide g_attr_changed() access
to consumers of the disk API.
sys/cam/scsi/scsi_pass.c:
sys/cam/scsi/scsi_da.c:
sys/geom/geom_dev.c:
sys/geom/geom_disk.c:
Use attribute changed events to track updates to physical path
information.
sys/cam/scsi/scsi_da.c:
Add AC_ADVINFO_CHANGED to the registered asynchronous CAM
events for this driver. When this event occurs, and
the updated buffer type references our physical path
attribute, emit a GEOM attribute changed event via the
disk_attr_changed() API.
sys/cam/scsi/scsi_pass.c:
Add AC_ADVINFO_CHANGED to the registered asynchronous CAM
events for this driver. When this event occurs, update
the physical patch devfs alias for this pass instance.
Submitted by: gibbs
Sponsored by: Spectra Logic Corporation
and replace tsleep(9) with msleep(9) which doesn't use a timeout. The
previously used timeout caused the event process to wake up ten times
per second on an idle system.
one_event() is now called with the topology lock held and it returns
with both the topology and event locks held when there are no more
events in the queue.
Reported by: mav, Marius Nünnerich
Reviewed by: freebsd-geom
of the EV_DONE flag and use the mutex to protect against losing wakeups
in g_waitfor_event().
Reported by: davidxu
Tested by: davidxu
Discussed on: freebsd-current
Without this change the following situation was possible:
1. Provider is orphaned from within class' access() method on last write
close - orphan provider event is send.
2. GEOM detects last write close on a provider and sends new provider event.
3. g_orphan_register() is called, and calls all orphan methods of attached
consumers.
4. New provider event is executed on orphaned provider, all classes can
taste already orphaned provider, and some may attach consumers to it.
Those consumers will never go away, because the g_orphan_register()
was already called.
We end up with a zombie provider.
With this change, at step 3, we will cancel new provider event.
How to repeat this problem:
# mdconfig -a -t malloc -s 10m
# geli init -i 0 md0
# geli attach md0
# newfs -L test /dev/md0.eli
# mount /dev/ufs/test /mnt/tmp
# geli detach -l md0.eli
# umount /mnt/tmp
# glabel status
Name Status Components
ufs/test N/A N/A
Reviewed by: phk
Approved by: re (kensmith)
This way GEOM classes can safely detach from provider when an orphan
event is received. This fixes 'detach with active requests' panic for
gstripe/gconcat under load.
PR: kern/102766
Submitted by: mjacob
OK'ed by: phk
MFC after: 1 week
waiting for geom events to happen:
Instead of maintaining a count of outstanding events, simply look if
the queue is empty. Make sure to not remove events from the queue
until they are executed in order to not open a new race.
Much work by: pjd
Tested by: kris
MT6: yes, should be.
This flag gets set whenever the thread posts an event on the GEOM
event queue, and if the flag is set when the thread is prepared
to return to userland from the kernel, g_waitidle() will be called
to make sure that the posted events have completed.
This can replace an insufficient number of g_waitidle() calls in
various other places, and has the advantage of being failsafe: Any
system call which does a VOP_OPEN()/VOP_CLOSE will now correctly
wait for any geom events it posted as part of spoils or tastes.
Assert that topology and Giant is not held in g_waitidle().
When we orphan/wither a provider, an attached geom+consumer could
end up being withered as a result and it may be in front of us in
the normal object scanning order so we need to do multi-pass. On
the other hand, there may be withering stuff we can't get rid off
(yet), so we need to keep track of both the existence of withering
stuff and if there is more we can do at this time.
Retire g_sanity() and corresponding debugflag (0x8)
Retire g_{stall,release}_events().
Under #ifdef DIAGNOSTIC:
Make g_valid_obj() an official function and have it return an an
non-zero integer which indicates the kind of object when found.
Implement G_VALID_{CLASS,GEOM,CONSUMER,PROVIDER}() macros based
on g_valid_obj().
Sprinkle calls to these macros liberally over the infrastructure.
Always check that we do not free a live object.
test is built to test GEOM as running in the kernel.
This commit is basically "unifdef -D_KERNEL" to remove the mainly #include
related code to support the userland-harness.
event posting functions varargs to fill these.
Attribute g_call_me() to appropriate g_geom's where necessary.
Add a flag argument to g_call_me() methods which will be used to signal
cancellation of events in the future.
This commit should be a no-op.
