Not all systems use efifb; pull hw.vga.textmode and choose a good console
mode instead if it's set to something non-zero. This is basically a revival
of the code that used to live in boot1, but instead rebased onto this
different way of doing mode selection in loader.efi.
Interestingly enough, the regression that was previously introduced where
GOP would not reflect the console setting does not seem to exist when
console mode selection is done here. I've not done any investigation as to
why this is the case. Nevertheless, boot1.efi is still not the best place to
do mode selection.
This fixes an avoidable EINVAL when the user tries to disable AN after
the port is initialized but l1cfg doesn't have a valid speed to use.
MFC after: 1 week
Sponsored by: Chelsio Communications
Originally KVM set %eax to 0 in the cpuid leaf 0x4000000 rather than
to the highest supported leaf in the hypervisor "branch". Detect this
case and fixup the %eax value so that the hypervisor is still
detected.
Reported by: jpaetzel
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D14810
Default the max resolution to 1080p, we'll accept Width x Height
specifications along with the following presets:
- 480p
- 720p
- 1080p
- 2160p or 4k
- 5k
PR: 224825
Differential Revision: https://reviews.freebsd.org/D14801
UEFI booting requires an EFI System Partition (ESP). On most storage devices
this will be in a specific partition type. To allow booting from CD/ISO
filesystems, UEFI will look for an ESP in the form of a FAT filesystem image
embedded in the image. Historically FreeBSD has added one of these to its
amd64 ISO images but marked it as simply another i386 boot image. Luckily for
us most UEFI implementations are rather forgiving and work this out for us.
This change adds the ability to mark a boot image as being a UEFI image. It
also modifies our ISO generation to use this marking for the UEFI image we
embed.
Reported by: Thomas Schmitt <scdbackup@gmx.net>
Reviewed by: emaste, imp
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D14809
error state.
If the device is in internal error state the hardware will not
generate completions. Just move on to destroy the resources.
Submitted by: slavash@
MFC after: 1 week
Sponsored by: Mellanox Technologies
Change page cleanup flow when in internal error to properly decrement
the page counts when reclaiming pages. That prevents timing out
waiting for extra pages that were actually cleaned up previously.
Submitted by: slavash@
MFC after: 1 week
Sponsored by: Mellanox Technologies
When a PCI error is detected the PCI state could be corrupt, don't
save it in that flow. Save the state after initialization. After
restoring the PCI state during slot reset save it again, restoring
the state destroys the previously saved state info.
Submitted by: slavash@
MFC after: 1 week
Sponsored by: Mellanox Technologies
Since the FW can be shared between PCI functions it is common that
more than one health poll will detected a failure, this can lead to
multiple resets.
The solution is to use a FW locking mechanism using semaphore space to
provide a way to synchronize between functions. The FW semaphore is
acquired via config cycle access. First the VSEC gateway must be
acquired, then the semaphore can be locked by writing a value to it
and confirmed it's locked by reading the same value back. The process
in the same to free the semaphore, except the value written should be
zero.
Submitted by: slavash@
MFC after: 1 week
Sponsored by: Mellanox Technologies
If a FW assert is considered fatal, indicated by a new bit in the
health buffer, reset the FW. After the reset, follow the normal
recovery flow.
Submitted by: slavash@
MFC after: 1 week
Sponsored by: Mellanox Technologies
Some mlx5 adapter firmware allows the driver to reset the firmware in
the event of an error. When a software reset is issued on any physical
function all PFs enter reset state. This is a recoverable condition.
The existing recovery flow was designed to allow the recovery of a
VF after a PF driver reload. This patch expands the scope of that
flow to recover PFs or VFs after a SW reset has been issued.
When a software reset is issued the following occurs:
1. The NIC interface mode is set to SW_RESET (7) while the reset is in
progress.
2. Once the reset completes the NIC interface mode is set to NIC
disabled (1).
After the reset has been issued (added in a subsequent patch) the
health poll for other functions will detect that the NIC interface
state has been set to disabled. This will cause it to enter the
existing recovery flow. If the PCI is still working (meaning it
doesn't return 0xff on all reads) it means recovery can proceed
immediately instead of waiting 60 seconds.
The error detetion has also been refactored to avoid incorrect or
misleading log messages.
Submitted by: slavash@
MFC after: 1 week
Sponsored by: Mellanox Technologies
When mlx5_enter_error_state() operation is forced by shutdown, the
messages surrounding setting the error state are not informational
and confuse users.
Submitted by: kib@
MFC after: 1 week
Sponsored by: Mellanox Technologies
This patch accumulates the following Linux commits:
- 8812c24d28f4972c4f2b9998bf30b1f2a1b62adf
net/mlx5: Add fast unload support in shutdown flow
- 59211bd3b6329c3e5f4a90ac3d7f87ffa7867073
net/mlx5: Split the load/unload flow into hardware and software flows
- 4525abeaae54560254a1bb8970b3d4c225d32ef4
net/mlx5: Expose command polling interface
Submitted by: Matthew Finlay <matt@mellanox.com>
MFC after: 1 week
Sponsored by: Mellanox Technologies
This patch accumulates the following Linux commits:
- 04c0c1ab38e95105d950db5b84e727637e149ce7
net/mlx5: PCI error recovery health care simulation
- 0179720d6be2096b8d0a4d143254ff9e77747daa
net/mlx5: Introduce trigger_health_work function
- 3fece5d676939f42f434c63dfe1bd42d7d94e6f0
net/mlx5: Continue health polling until it is explicitly stopped
Submitted by: Matthew Finlay <matt@mellanox.com>
MFC after: 1 week
Sponsored by: Mellanox Technologies
Bring #includes closer to style(9) and reduce differences between the
(three) MD versions of linux_machdep.c and linux_sysvec.c.
Sponsored by: Turing Robotic Industries Inc.
The mlx5e_destroy_ifp() function may be called from the system workqueue and
in this case trying to flush all works will cause a dead lock.
Instead of using the system workqueue, create a designated workqueue
for each mlx5en(4) device instance.
Submitted by: slavash@
MFC after: 1 week
Sponsored by: Mellanox Technologies
Forwarded packets passed through PFIL_OUT, which made it difficult for
firewalls to figure out if they were forwarding or producing packets. This in
turn is an issue for pf for IPv6 fragment handling: it needs to call
ip6_output() or ip6_forward() to handle the fragments. Figuring out which was
difficult (and until now, incorrect).
Having pfil distinguish the two removes an ugly piece of code from pf.
Introduce a new variant of the netpfil callbacks with a flags variable, which
has PFIL_FWD set for forwarded packets. This allows pf to reliably work out if
a packet is forwarded.
Reviewed by: ae, kevans
Differential Revision: https://reviews.freebsd.org/D13715
have one pending. Otherwise, we can race and send two, which is
wasteful in close proximity. It can also cause the acaquire/release
count for TUR to be > 1, which is undexpected.
PR: 226510
Differential Review: https://reviews.freebsd.org/D14792
i386 was changed to only require critical section around the thread
FPU state manipulations, and vm86_bioscall callers already enter
critical section for other reasons.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Mark the table with PNP info.
Fix compilation by returning FILTER_STRAY in two places, as suggested by comments.
Create a simple module from this. Left unconnected because I can't test it as a module.
Many licenses on Linuxolator files contained small variations from the
standard FreeBSD license text. To avoid license proliferation switch to
the standard 2-Clause FreeBSD license for those files where I have
permission from each of the listed copyright holders.
Approved by: rdivacky, marcel
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
The mps(4) and mpr(4) drivers and hardware handle T10 Protection
Information, which is a system of checksums and guard blocks to protect
data while it is being transferred and while it is on disk. It is also
known as T10 DIF. For more details, see section 4.22 of the SBC-4 spec.
Supporting Type 2 protection requires using 32 byte CDBs, and filling in
the fields in those CDBs. We don't yet support that in the da(4) driver.
Type 1 and Type 3 protection don't require that, and can be handled by
the mps(4)/mpr(4) driver's code and firmware without any additional
input from the da(4) driver.
If a drive has Type 2 protection enabled (you frequently see this with
SAS drives shipped from Dell), don't set the various EEDP fields in the
mps(4)/mpr(4) driver command fields. Otherwise, you wind up with errors
like this that would otherwise make no sense:
(da9:mpr0:0:18:0): READ(10). CDB: 28 00 00 00 00 00 00 02 00 00
(da9:mpr0:0:18:0): CAM status: SCSI Status Error
(da9:mpr0:0:18:0): SCSI status: Check Condition
(da9:mpr0:0:18:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code)
(da9:mpr0:0:18:0):
(da9:mpr0:0:18:0): Field Replaceable Unit: 0
(da9:mpr0:0:18:0): Command Specific Info: 0
(da9:mpr0:0:18:0):
(da9:mpr0:0:18:0): Descriptor 0x80: f8 21
(da9:mpr0:0:18:0): Descriptor 0x81: 00 00 00 00 00 00
(da9:mpr0:0:18:0): Error 22, Unretryable error
In other words, what kind of strange SAS hard drive doesn't support a
standard 10 byte SCSI READ command? In this case, one that has Type 2
protection enabled.
We can revisit this when we put Type 2 protection support in the da(4)
driver, but for now this will help people who put Type 2 formatted drives
in a system and wonder what in the world is going on.
MFC after: 3 days
Sponsored by: Spectra Logic
endpoints. The Allwinner driver will need to set this as the EPINFO
register isn't useful there.
Submitted by: jmcneill
Reviewed by: hselasky
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D5881
vdev_dbgmsg_print_tree printed vdev_id of uint64_t type with %u format
specifier. That caused subsequent parameters to be incorrectly read
from the stack and lead to a crash when a wrong value was interpreted as
a string pointer.
This should be upstreamed.
Reported by: pho
MFC after: 3 days
It can be used to validate basic algorithm correctness on a variety of inputs,
by comarison to openssl.
While here, add some sanity to the crypto/Makefile.
The tool may not be perfect, but getting it in tree where collaboration can
happen is a nice first step. The pace of development outside of svn seems
to have slowed down mid-2017.
Obtained from: github bsdjhb/freebsd:cryptocheck
Sponsored by: Dell EMC Isilon
--- vm_reserv.o ---
In file included from /opt/src/svn-current/sys/vm/vm_reserv.c:48:
In file included from /opt/src/svn-current/sys/sys/counter.h:37:
./machine/counter.h:174:3: error: implicit declaration of function
'critical_enter' is invalid in C99 [-Werror,-Wimplicit-function-declarat
ion]
critical_enter();
Reviewed by: jeff@
There's no real annotation for it, so it's not immediately obvious to the
unfamiliar that these pointers are to locations in the EFI runtime map
unlike the system table pointer immediately above them.
illumos/illumos-gate@edc8ef7d92
Reviewed by: C Fraire <cfraire@me.com>
Reviewed by: Andy Fiddaman <omnios@citrus-it.co.uk>
Approved by: Joshua M. Clulow <josh@sysmgr.org>
Author: Toomas Soome <tsoome@me.com>
