combinations) by forcing FAILFILE into .CURDIR as we do for all other
universe output files. [1] Similarly make FAILFILE start with "_." as well.
Reviewed by: silence-on-src [1]
MFC after: 6 days
This produces a list of currently supported targets. Here "supported"
means "built in make universe" on the theory that those targets are
more supported than any that might work in 'make buildworld TARGET=x
TARGET_ARCH=y' since the latter are less tested.
Suggested by: rwatson
Implement MACHINE_ARCH=mips64e[lb] to build N64 images. This replaces
MACHINE_ARCH=mipse[lb] TARGET_ABI=n64.
MACHINE_ARCH=mipsn32e[lb] has been added, but currently requires
WITHOUT_CDDL due to atomic issues in libzfs. I've not investigated
this much, but implemented this to preserve as much of the TARGET_ABI
functionality that I could. Since its presence doesn't affect the
working cases, I've kept it in for now.
Added mips64e[lb] to make universe, so more kernels build.
And I think this (finally) closes the curtain on the tbemd tree.
not the one we build as part of make world. This means that make
universe will fail if building on a too-old current or any stable
system prior to a few days ago in weird ways (parse errors from
shell). This copes with these old systems in two ways:
(1) Works around the WARNING: issue by filtering all warnings that
sneak onto stdout.
(2) if TARGET_ARCH_${kernel} winds up being empty, then we error out
immediately with a semi-useful error message. This usually comes from
config not groking -m.
Ideally, we'd use a buildworld's config here, but that's tricky, so
I'll leave that detail to others to fix (it has to be done post make
world for the arch rather than at the top level makefile). This
should make 'make universe' usable from recent 8-stable systems
(recent == last few months or so) for building -current. They have
-m, but spewed warnings out stdout. Older systems will now at least
get a firm error early rather than a confusing error late.
and powerpc64 to universe for the first time. In general, provide
(slightly hacky) knowledge of multi-architecture TARGETs to universe as
well as the ability to distinguish the correct toolchain for a given
kernel using config -m.
semantics for JFLAG with tinderbox as for universe. Previously doing
'make JFLAG=-j4 tinderbox' was equivalent to 'make -j4 universe'
(i.e. 4 worlds in parallel) rather than 'make JFLAG=-j4 universe'
(i.e. worlds in sequence, each built with -j4).
MFC after: 1 month
TARGET_BIG_ENDIAN is now completely dead, except where it was
originally supposed to be used (internally in the toolchain building).
TARGET_ARCH has changed in three cases:
(1) Little endian mips has changed to mipsel.
(2) Big endian mips has changed to mipseb.
(3) Big endian arm has changed to armeb.
Some additional changes are needed to make 'make universe' work on arm
and mips after this change, so those are commented out for now.
UPDATING information will be forthcoming. Any remaining rough edges
will be hammered out in -current.
Remove __gnu89_inline.
Now that we use C99 almost everywhere, just use C99-style in the pmap
code. Since the pmap code is the only consumer of __gnu89_inline, remove
it from cdefs.h as well. Because the flag was only introduced 17 months
ago, I don't expect any problems.
Reviewed by: alc
It was backed out, because it prevented us from building kernels using a
7.x compiler. Now that most people use 8.x, there is nothing that holds
us back. Even if people run 7.x, they should be able to build a kernel
if they run `make kernel-toolchain' or `make buildworld' first.
make universe, split the logic into two parts:
- 1st to build worlds and generate kernel configs like LINT.
- 2nd to build kernels for a given TARGET architecture correctly
finding all newly generated configs, not knowing anything about
LINT anymore. (*)
(*) If you know better/cleaner/... ways to do this, let me know.
Discussed on/with: arch, jhb, rwatson
MFC after: 1 month
you can build the cross development tools and install them as
$XDEV-freebsd-xxx for each tool. This allows one to use autoconf to
find the tools for cross building scenarios.
`make universe'. This catches a few more arm and, once enabled, mips
configs and permits having local configs named like NOINET6.
Reviewed by: phk
MFC after: 4 weeks
a developer can rest reasonably assured that the tinderbox will not
be broken. This target leverages most of 'universe' but will exit
non-zero and output a summary at the end.
"make tinderbox"
no active development on it for over a year now and it isn't
reliable under a simple buildworld. Developers can't be expected to
test code targeted for it.
only matters in the early stages of bootstrapping, of course, but gnu make can't
handle bsd make Makefiles at all if they use any of the 'dot' directives, which
src/Makefile has in abudnance.
and that controls which platforms are being built as part of a "make
universe". By default TARGETS is set to the 8 platforms currently
being built. This variable is useful for running or re-running a
"make universe" with only a selected set of platforms. This makes the
universe target slightly more useful in cases the universe is limited
to a developer's scope or objectives. For example, when a universe
failed for a particular platform and fixes need to be tested for that
particular platform then a developer can restart the universe for
only that platform, even if the initial universe is still building
other platforms.
HISTORICAL_MAKE_WORLD from the text that's output. This was committed
against the previous consensus. Leave the documentation in this file
as a compromose. The HISTORICAL_MAKE_WORLD knob is intentionally
obfuscated and we only trust people smart enough to read the Makefile
to use it. All others have no business using it due to its danger,
unless DESTDIR is set.
Dissentors: grog, obrien, trhodes
undocumented HISTORICAL_MAKE_WORLD variable and set it. Note it
here so the blow up will not really be a surprise to people who
read.
Link the buildingworld chapter of our handbook in the README
while I'm here.
environment for cross building (the same one you'd get interactively
in make buildenv). This cannot be a simple
make -f Makefile.inc1 -V WMAKEENV
because in PATH is not set correctly unless one takes a trip through
the Makefile/Makefile.inc1 indirection, the logic of which is too
large to reproduce outside of Makefiles.
- removes obsolete files/dirs or libraries.
- works in interactive (default) and batch mode
- respects DISTDIR
- documented in UPDATING and build(7)
The head of the file ObsoleteFiles.inc contains instructions how to add
obsolete files/dirs/libs to the list. Obviously one should add obsolete
files to this list, when he removes a file/dir/lib from the basesystem.
Additionally add check-old target:
- allows re@ to check if a file on the obsolete list resurfaces
Design goals:
- allows full control by the user (default interactive mode)
- possibility of scripted removal of obsolete files (batch mode)
- opt-in removal of files (explicit list of files)
- seperate removal of libs (2 delete targets)
Important design decissions:
- structured list of files to remove instead of a plain text file:
* allows to remove additional files if a NO_foo knob is specified
without the need to change the targets (no NO_foo knob is respected
yet)
- not using mtree like NetBSD does:
* mtree doesn't has an interactive mode
Discussed on: arch (long ago), current (this year)
Additional input from: re (hrs)
Approved by: mentor (joerg)
the "make -n universe" output looks more builder (human) friendly.
- Wrap the "universe" target into a ".if make(universe)"; it's only
intended to be called directly so it should be safe to do it.
and adjust the path in the Makefile for the upgrade_checks target.
These checks are really feature upgrade checks that should be fast
and just find out whether we need to build a new make before
proceeding with other targets like buildworld. This makes the
place free for a real regression test suite in the old place.
testing for variables that are always defined (e.g.,
"make -V CC") would still print a false warning. Fix
this by only passing a submake the MAKEOBJDIRPREFIX=*
argument if it was present. As a result, we loose
the check for -DMAKEOBJDIRPREFIX, or an esoteric
"MAKEOBJDIRPREFIX = foo" (with embedded spaces), but
these are unorthodox enough to not care about them.
The make(1) bug mentioned in the previous revision
was just fixed in make/main.c,v 1.109.
When make flags are passed to make in the environment, the string is
chopped up in an (argc,argv) vector. This happens in brk_string() and
the chopped up string is stored in static buffer. When this includes
something like "-V BINMAKE", then a pointer into the static buffer is
put on the variables list for evaluation later. However, brk_string()
is used for more than just chopping up the MAKEFLAGS env. variable, so
it's very likely that the static buffer is clobbered. In fact, this is
exactly what happens.
The result is that _MAKEOBJDIRPREFIX gets assigned whatever garbage
the child make happens to emit, causing the test to fail. Like this:
pluto2% cd /usr/src
pluto2% make -V BINMAKE
"/q/6.x/src/Makefile", line 94: MAKEOBJDIRPREFIX can only be set in environment, not as a global (in /etc/make.conf) or command-line variable.
pluto2% make -dv -V BINMAKE | & grep _MAKEOBJDIRPREFIX
Global:_MAKEOBJDIRPREFIX = }
The fix is to not use MAKEFLAGS for this, but simple pass the flags
as arguments. Ideally make(1) should be fixed but that's beyond the
scope of my attention span.
This fixes release.
by forcing the creation of an object directory for the make regression
tests. Let make handle the tracking of the dependency and installation
of test_shell script.
Submitted by: ru
rates pretty high on the "hack!" scale, but it works for me. Adding
-DWANT_LIB32 to the world build command line, or 'WANT_LIB32=yes' to
/etc/make.conf will include the 32 bit libraries with the build.
I have not made this default behavior. Cross compiling this stuff is an
adventure I have not investigated.
This is still a WIP. We needed this at work so that we could install from
a readonly obj tree - lib32/build.sh wasn't up to that.
built in parallel. Examples:
make universe
Build worlds sequentially, each world sequentially.
make universe JFLAG=-j4
Build worlds sequentially, each world in parallel.
make -j4 universe
make -j4 universe JFLAG=-j2
Build four worlds in parallel, each world will be
built in parallel too. World parallelization is
set to four in the first synopsis, and to two in
the second.
make -j4 universe JFLAG=-B
Build worlds in parallel, each world sequentially.
("world" == buildworld followed by buildkernels.)
Prayers: obrien, phk
two -n flags. If only one -n flag is given the old behaviour
is retained (POLA). In order to make this working for installworld
change the IMAKEENV in this case so that the tools are found
(we have no temporary installation environment in this case).
Submitted by: ru (IMAKEENV part)
trying to upgrade their system with make world instead of following
the preferred and suggested sequence of commands. The fact remains
that make world does not upgrade the kernel.
Allow make world when DESTDIR has been specified, including when
DESTDIR specifies the root file system. Otherwise, print a useful
warning and fail.
Reviewed, tested and scrutinized by: gad@
but the biggest issue is that there are situatons when
${.OBJDIR} == ${.SRCDIR}, and in those situations the previous version
would happily remove all your /usr/src while it was cleaning out the objects.
Not that *you* would be happy about it... Thanks to bde for immediately
noticing this serious possibility.
More improvements will be made to this target, but I wanted to commit this
safer version right now, before anyone lost their /usr/src due to it.
Reviewed by: bde
MFC after: 10 days
that was built in previous 'make buildworld' and 'make buildkernel'. The
target knows enough to run a 'chflags -R 0' and a second 'rm' if the first
'rm' ran into any errors while removing files.
Suggested by: email with Richard Coleman Re: upcoming 64b-time_t changes.
Reviewed by: imp, marcel, and others on -hackers
MFC after: 1 week
Makefile.inc1 underscore targets with a big warning that they are
intentionally undocumented, subject to change without notice and
might poison your dog etc. If you don't know what they are, then they
are not meant for you to use.
I've added these by hand to so many many trees that I've lost count. I
find them rather useful.
buildworld targets by default, but allow it to be done for all user
targets by introducing a boolean option, named ALWAYS_CHECK_MAKE.
This change is by no means perfect and I don't even want to claim
this to be a solution. It does however address the fact that not
everybody likes to see make(1) rebuilt simply because the regression
test failed for some reason or other, including pilot error. It
therefore serves the purpose of keeping the crowd happy until we
have something better or simply reached a compromise.
The reasons for changing the default behaviour are:
o It avoids a negative, possibly non-intuitive option,
o It's according to POLA and fond of feet,
o Only buildworld is documented to do its best to be
successful at reasonably cost.
Reviewed by: gad, imp, obrien, peter
one is already available. This avoids sometimes unnecessary
step of attempting to rebuild the make binary again which may
fail at all if, for example, one has removed his /usr/include
before doing an installworld (to keep /usr/include tidied up).
Pointed out by: kris, marcel
comprised of the path to a make(1) binary (possibly the one
built by the "make" target in this Makefile), and a path to
a fresh share/mk. The idea is to allow "make release" pick
up the right "make" binary, if one exists.
This fixes release.5 I broke with the last commit here; the
second PATH here was overriding the right one from WMAKEENV
while rebuilding the "build-tools" for crunched binaries.
# If -DWANT_AOUT is specified, a `make world' with OBJFORMAT=elf will
# update the legacy support for aout. This includes all libraries, ld.so
# and boot objects. This part of build should be regarded as
# deprecated and you should _not_ expect to be able to do this past the
# release of 4.0. You have exactly one major release to move entirely
# to elf.
Now that we're past 5.0, these aren't needed at all anymore and it is
well past its freshness date.
When we call "distributeworld" as part of "make release", we set
MACHINE and MACHINE_ARCH to point to TARGET and TARGET_ARCH; this
confused src/Makefile's idea of what ${MAKEPATH}, and consequently
${MAKE}, is (well, it still confuses ${MAKEPATH}, but see below).
To overcome this problem, we now take the following approach:
- We preserve the make(1)'s idea of its argv[0], ${MAKE}.
- We check to see if ${MAKE} passes the regression tests.
- If it does, we use it. Otherwise, we build and use an
up-to-date make(1).
This fix is still not quite right, in a situation where a single
/usr/obj is shared between different architecture machines, but
it is less critical and I hope to fix that soon.
one space to make the dates line up for easy mental math.
# Too bad only i386 and pc98 are the only parts of the universe
# currently buildable on my box :-(
be suitable for building. The old action here was to upgrade the
make in /usr/bin. This is both bogus and does not work under non
root. So, rather than overwriting the existing /usr/bin/make, we
now install it into a safe location, and use it from there.
Reviewed by: imp, marcel
Approved by: re (rwatson)
for each arch i386 sparc64 alpha ia64
make buildworld TARGET_ARCH=$arch
if NOTES found
make LINT
foreach kern ${arch}/conf/[A-Z0-9]*
make buildkernel TARGET_ARCH=$arch KERNCONF=$kern
Errors from the individual steps are ignored and the stdout+stderr
are saved in distinct files in root of the source tree with names
like: _.${arch}.${target}
On my dual 1.6G Athlon it takes roughly four hours to run this target.
under way to move the remnants of the a.out toolchain to ports. As the
comment in src/Makefile said, this stuff is deprecated and one should not
expect this to remain beyond 4.0-REL. It has already lasted WAY beyond
that.
Notable exceptions:
gcc - I have not touched the a.out generation stuff there.
ldd/ldconfig - still have some code to interface with a.out rtld.
old as/ld/etc - I have not removed these yet, pending their move to ports.
some includes - necessary for ldd/ldconfig for now.
Tested on: i386 (extensively), alpha
which fails the make tests (doesn't understand ${notdef:U}) and therefore
fails on __FBSDID in usr.bin/make/*. -DBOOTSTRAPPING is no help here since
this is before we are using the new share/mk/* files, and it would conflict
with the builtin -DBOOTSTRAPPING support later.. so use a different flag.
same set of features as in recently added bsd.incs.mk
(FILESGROUPS, accessibility from both bsd.prog.mk and
bsd.lib.mk, de-pessimized typical installation path,
etc.) New standard targets: buildfiles, installfiles,
and files (buildfiles + installfiles).
via INCS. Implemented INCSLINKS (equivalent to SYMLINKS) to
handle symlinking include files. Allow for multiple groups of
include files to be installed, with the powerful INCSGROUPS knob.
Documentation to follow.
Added standard `includes' and `incsinstall' targets, use them
in Makefile.inc1. Headers from the following makefiles were
not installed before (during `includes' in Makefile.inc1):
kerberos5/lib/libtelnet/Makefile
lib/libbz2/Makefile
lib/libdevinfo/Makefile
lib/libform/Makefile
lib/libisc/Makefile
lib/libmenu/Makefile
lib/libmilter/Makefile
lib/libpanel/Makefile
Replaced all `beforeinstall' targets for installing includes
with the INCS stuff.
Renamed INCDIR to INCSDIR, for consistency with FILES and SCRIPTS,
and for compatibility with NetBSD. Similarly for INCOWN, INCGRP,
and INCMODE.
Consistently use INCLUDEDIR instead of /usr/include.
gnu/lib/libstdc++/Makefile and gnu/lib/libsupc++/Makefile changes
were only lightly tested due to the missing contrib/libstdc++-v3.
I fully tested the pre-WIP_GCC31 version of this patch with the
contrib/libstdc++.295 stuff.
These changes have been tested on i386 with the -DNO_WERROR "make
world" and "make release".
and `maninstall' targets. This fixes the issue where each subdir
was descended into twice during "make all", and also resurrects
the standardization of `maninstall'.
Urged by: bde
You need to set TARGET_ARCH and possibly TARGET, the same
way you normally do it for a cross build(7).
Renamed `distribworld' to a more natutal `distributeworld'.
Put pwd_mkdb(8) under ${INSTALLTMP}; for `distributeworld'.
Do not install games and profiled libraries to the ${CHROOTDIR}
with the initial installworld.
Eliminate the need in the second installworld. For that, make sure
_everything_ is built in the "world" environment, using the right
tool chain.
Added SUBDIR_OVERRIDE helper stuff to Makefile.inc1. Split the
buildworld process into stages, and skip some stages when
SUBDIR_OVERRIDE is set (used to build crypto, krb4, and krb5
dists).
Added NO_MAKEDB_RUN knob to Makefile.inc1 to avoid running
makewhatis(1) at the end of installworld (used when making crypto,
krb4, and krb5 dists).
In release/scripts/doFS.sh, ensure that the correct boot blocks are
used.
Moved the creation of the "crypto" dist from release.5 to
release.2.
In release.3 and doMFSKERN, build kernels in the "world"
environment. KERNELS now means "additional" kernels, GENERIC is
always built.
Ensure we build crunched binaries in the "world" environment.
Obfuscate release/Makefile some more (WMAKEENV) to achieve this.
Inline createBOOTMFS target.
Use already built GENERIC kernel modules to augment mfsfd's
/stand/modules. GC doMODULES as such.
Assorted fixes:
Get rid of the "afterdistribute" target by moving the single use
of it from sys/Makefile to etc/Makefile's "distribute".
Makefile.inc1: apparently "etc" no longer needs to be last for
"distribute" to succeed.
gnu/usr.bin/perl/library/Makefile.inc: do not override the
"install" and "distribute" targets, do it the "canonical" way.
release/scripts/{man,cat}pages-make.sh: make sure Perl manpages and
catpages appear in the right dists. Note that because Perl does
not respect the MANBUILDCAT (and NOMAN), this results in a loss of
/usr/share/perl/man/cat* empty directories. This will be fixed
soon.
Turn MAKE_KERBEROS4 into a plain boolean variable (if it is set it
means "make KerberosIV"), as documented in the make.conf(5)
manpage. Most of the userland makefiles did not test it for "YES"
anyway.
XXX Should specialized kerberized libpam versions be included into
the krb4 and krb5 dists? (libpam.a would be incorrect anyway if
both krb4 and krb5 dists were choosen.)
Make sure "games" dist is made before "catpages", otherwise games
catpages settle in the wrong dist.
Fast build machine provided by: Igor Kucherenko <kivvy@sunbay.com>
Ensure all standard targets honor SUBDIR. Now `make obj' descends into
SUBDIRs even if NOOBJ is set (some descendants may still need an object
directory, but we do not have such precedents). Now `make install' in
non-bsd.subdir.mk makefiles runs `afterinstall' target _after_ `install'
in SUBDIRs, like we do in bsd.subdir.mk. Nothing depended on the wrong
order anyway.
Fixed `distribute' targets (except for the bsd.subdir.mk version) so that
they do not depend on _SUBDIR; `distribute' calls `install' which already
depends on _SUBDIR.
De-standardize `maninstall', otherwise manpages would be installed twice.
(To be revised later.)
and UPDATING and has been posted to both freebsd-current and
freebsd-stable, users are still not adding the required smmsp user and
group before doing an installworld. Therefore, don't let users do an
installworld unless they have followed directions.
Add a new installcheck Makefile target which installworld runs before
actually starting the installation. This target can be used by other parts
of userland as well. The first addition to the target is to check for the
smmsp user and group if NO_SENDMAIL isn't defined.
Others may add checks to this target as they see fit.
MFC after: 1 week
The distribute target is basicly the same as an install. For
perl, this means that miniperl is needed. Since miniperl is
only present in the object directory, we need to make sure
the path is set correctly. To do this, we have make release
use a new distribworld target that sets the path before doing
a make distribute.
While here fix some minor style bugs (whitespacing) and move the
make target from Makefile.upgrade to this file.
Simplify the make target to make it readable.
/usr/games on purpose. All tools in /usr/games are built as part of
the tool stages to support building world on machines without games.
This fixes any build problems that have been caused by non-standard
paths and also removes the primary objection for not using absolute
paths.
non-root cross-building.
o Makefile.inc0 is not used anymore.
o The legacy aout build has been removed.
o Selectively build tools *before* building includes/libraries.
o Avoid using mtree to populate the obj tree.
be a good bit more successful at doing automated upgrades than the
previous aout-to-elf target, anyway. I'll MF3 in a couple of days
depending on how this does.
try and recurse if the lkm dir exists for some reason but there isn't any
Makefile there. (eg: stray files prevented cvs update -P from removing the
empty dirs)
checkdpadd, lint, maninstall, objlink, regress and tags.
Removed bogus user target cleanobj. It is the non-recursive base of
the cleandir target, so it is not useful (or usable) here.
Reported by: Justin Gibbs.
Add the move-aout-libs upgrade target so that people who have already
gone elf can put their libraries through the mincer. Anyone who hasn't
deleted aout libraries from /usr/lib (but has done a make world putting
the new aout libs in /usr/lib/aout) will be asked for confirmation
to delete them one by one.
- Moved most of the guts of Makefile to Makefile.inc1 to become the
backend for the build system.
- The new Makefile doesn't suffer from problems including the wrong
sys.mk because it doesn't use anything in there or bsd.own.mk. So,
from now on, the proper build command is just `make world' (or
buildworld).
- The intermediate makefiles called Makefile.inc0 and Makefile.upgrade
fiddle with the OBJFORMAT and MAKEOBJDIRPREFIX variables so that
both aout and elf object trees can coexist. Makefile.upgrade contains
the aout->elf transition build.
- A cross build environment is now very close to reality. Specifying
TOOLDIR, setting OBJFORMAT and MAKEOBJDIRPREFIX allow that.
See the comments in Makefile for more info.
for building and installing a local sendmail.cf..
I'm a little nervous about the implications of having an obj dir built
under etc (to get to the obj dir for sendmail), but the make rules appear
to DTRT.
recently added definitions from sys.mk to bsd.own.mk. Include the
src-relative bsd.own.mk in src/Makefile to pick up all new definitions.
Don't check that MACHINE_ARCH is defined in src/Makefile, since it is
(and should have been) guaranteed to be defined.
working when the target system is not binary compatible. Use various
hacks to work around minor problems in the source and binary tree
layouts:
- caesar and strfile are built normally (the source layout is good),
then installed by copying them to ${WORLDTMP}/usr/bin (they are
installed in ${WORLDTMP}/usr/games, but I don't want to put that
in $PATH).
- colldef and mklocale are built and installed normally. Messy and
incomplete relative path searches for them and caesar and strfile
can now go away.
- internal tools that aren't installed are now built and left lying
around for the `make all' pass to use. If the target system is
not binary compatible, it is critical that these tools don't get
rebuilt. Cleaning of the obj tree before building the internal
tools should ensure this.
- most internal tools are built using internal build-tools targets,
but tn3270 is simpler for a change - it has all the tools in a
separate tree, so they can be built using `make all'.
build at least compile_et and lex, and although almost any version
of yacc could work, the version in -stable doesn't actually work
with -current makefiles because it doesn't support -o.
Submitted by: Ian Holland <ianh@tortuga.com.au>
- don't announce `mtree' as `mtools'.
- don't install to ${DESTDIR}/usr/sbin (which often doesn't exist if
DESTDIR is set and may be read-only if DESTDIR is not set).
- install to (${WORLDTMP}/usr/sbin so that the new mtree is actually
in $PATH if DESTDIR is set.
- don't use the host make or the host sys.mk. This is probably
unimportant.
- use a temporary obj dir like the one for `make'. This was mainly
necessary because I forgot to remove the MAKEOBJDIRPREFIX unsetting
which was just a bug for mtree. A non-quick fix would handle mtree
more like a bootstrap tool (the only additional complications are to
create ${BINDIR} and avoid excessive cleaning). Except a non-quick
fix would change much more.
(in particular, if DESTDIR is empty or "/"), then the host's ldconfig will
be the target's ldconfig by the time it is run.
Fixed disordering of env.
Don't know too much about libcrypt. Use exactly the same definition of
_libcrypt as lib/Makefile.
Don't build strip twice.
commit - don't wander off to bootstrap mtree and include in the middle
of bootstrapping lex, and don't forget what we were doing and build
some lex obj dirs twice.
crypt library should be used when building bootstrap-libraries. This
make it work on machines that don't have the secure directory.
Thanks to Paul Allenby <pallenby@mikom.csir.co.za> for bringing it to
my attention.
for the rest of the build. I'm not certain, but I think this determines
which crypt() goes into /sbin/init. This change shouldn't hurt anyway. :-)
Based on a suggestion by: bde
real source tree, the bootstrap target would attempt have cpio copy the
files over themselves, unlinking them first. I think this only happened
with make -DNOCLEAN world at the transition between a symlinked
objdir/tmp/usr/include/{sys,net,..} and real files.
with real copies. I'm sick of !@#&!^!@#*& mtree chowning directories in
my src/sys/* tree after it follows the symlinks. I still believe that
mtree is broken for doing this (introduced in mtree.c rev 1.5).
helpful to stop it running /usr/libexec/aout/as for real while bootstrapping.
Only force a strict path when we really have built all the tools in
$OBJDIR/tmp/usr/libexec/*.
Move a.out libraries to /usr/lib/aout to make space for ELF libs.
Make rtld usr /usr/lib/aout as default library path.
Make ldconfig reject /usr/lib as an a.out library path.
Fix various Makefiles for LIBDIR!=/usr/lib breakage.
This will after a make world & reboot give a system that no
longer uses /usr/lib/*, infact one could remove all the old
libraries there, they are not used anymore.
We are getting close to an ELF make world, but I'll let this
all settle for a week or two...
Move our old a.out utils to /usr/libexec/aout.
Enable binutils and put the utils in /usr/libexec/elf
Enable objformat, a little helper program that calls the right
utils based on /etc/objformat and $OBJFORMAT.
This will enable the ELF generating tools.
Remember that this is only step one, the system is still compiled
and run in a.out format ONLY.
Problem left to solve: The BSD manpages wins over the GNU equivalents
as the are installed last. We need to distinguish between the manpages
somehow...
execution is usually unnecessary in BSD Makefiles because BSD make
invokes shells with -e. Using it to give conditional execution is
often wrong in BSD makefiles because BSD make joins shell commands
when invoked in certain ways (in particular, as `make -jN'). Example
makefile:
---
clean:
cd /
false && true
rm -rf * # a dangerous command
---
This should terminate after the `false && true' command fails, but
it doesn't when the commands are joined (`false && true' is a non-
simple command, so -e doesn't cause termination). The b-maked version:
---
clean:
cd /
false; true
rm -rf * # a dangerous command
---
terminates after the `false' command fails (`false' is a simple
command, so -e causes termination). However, for versions of
make like gnu make that don't invoke shells with -e, this change
completely breaks the makefile.
This is one of the fixes for the bug suite that caused `make world'
to sometimes put raw cpp output in .depend files. Building of cc
sometimes failed, but the failure did not terminate the build
immediately, and various wrong versions of the cc components were
used until one was wrong enough to cause a fatal error.
The headers that are installed in WORLDTMP are part of the interface
that includes libraries like libc, so they must be installed together.
This means that lib-tools and build-tools should be merged. The FreeBSD
build only works in hosted form where it is assumed that the installed
version contains adequate tools to build the latest release.
`make world' by about 14% here (down to 4490 seconds real on a
K6/233). Temporarily skip this optimization when building with
-j, since there are still many broken makefiles.
Fixed NOCLEANDIR option. Cleaning of `.depend' was broken.
Put -nostdinc in CFLAGS, not in CC, and don't override the default
CC. This fixes enforcing use of ${WORLDTMP}/usr/include.
Don't install library man pages in ${WORLDTMP}.
`make world' times by about 10%. Use a new `bootstrap-libraries'
target to build just enough (static) libraries to bootstrap the
tools, and delay building of shared libraries until all the tools
have been built.
Fixed `/usr/bin/make world'. The version of `make' that we buildis
nand use is named "make", not ${MAKE}.
cleaning doesn't affect the normal copy. Save a little time by not doing
unnecessary clean, depend nd cleandepend steps.
Reviewed by: mckay@freebsd.org
Added xargs to build-tools. It may be used for kdump and truss.
(slightly stale) shared libraries get installed before non-tools
are linked. The 2-stage build of the libraries has never really
worked, since we link to the libraries built in the first stage.
so that dirtier-than-previously tools aren't left lying around to be
installed.
Filter out NOPIC from ${MK_FLAGS} for `make ${OBJDIR}' for ld (and
some other things), so that the obj dir for ld/rtld always gets
re-made.
Fixed a literal "make".
Build libraries (for linking the tools to) in a more correct order
(for linking freshly created shared libraries to each other). This
is probably a no-op now that shared libraries for tools aren't
built, but I didn't test any intermediate versions. Security-related
directories that are not built by default may now be misordered
for the shared case.
Don't build libcompat specially. It isn't used for tools, and
shouldn't be used in /usr/src (it is only used for IPXrouted and
crufty games).
Added missing ${.CURDIR} to existence tests for library directories.
Existence tests for top-level directories are still broken.
Test for library directories actually being built, not for directories
above them.
earlier. This is probably unnecessary.
Added now-necessary -B for installing headers for libss.
Removed now-unnecessary -B for building cleandepend for rpcgen.
Add the path to the source .mk files to the beginning of .MAKEFLAGS
instead of to the end, so that there is more chance of it having
priority. Additions in /etc/make.conf still have priority for
sub-makes if they are also at the beginning, although this is
probably not wanted for building /usr/src.
Use ${MK_FLAGS} for building dependencies for tools. This saves
time building dependencies for tools that won't be created (mainly
profiled libraries) and will be necessary to give correct dependencies
when tools are built static.
Spell the object directory as ${OBJDIR} consistently (even when we know
that ${OBJDIR} == "obj").
Print ${DESTDIR} in messages where appropriate.
Fixed some misformattings.
- After the install has been done, but before makedb is run, run
'ldconfig -R' to pick up new shlib dependencies.
Suggested by: Amancio and a whole lot of other folks
of doing the normal build. When the alpha bootstrap is complete (there
is more work to do!), the alpha will build like the i386 does now.
I changed i386 references to ${MACHINE} now that we're multi-architecture.
Did I ever spam this file good with that last commit. Despite 3
reviewers, we still managed to revoke the eBones fixes, TCL 8.0 support,
libvgl and a host of other new things from this file in the process of
parallelizing the Makefile. DOH! I think we need more pointy hats - this
particular incident is worthy of a small children's birthday party's worth of
pointy hats. ;-)
I certainly intend to take more care with the processing of aged diffs
in the future, even if it does mean reading through 20K's worth of them.
I might also be a bit more anal about asking for more up-to-date changes
before looking at them. ;)
way - for buildworld only.
Rev.1.136 broke the (deprecated) external includes target. Rev.1.144 was
a half-baked backout of rev.1.136. It broke SHARED=symlinks for the
buildworld target and installation of subdirs of src/include for the
includes target.
wrong switches were being passed to 'make' that caused sys.mk to come from
the /usr/share/mk location but the bsd.*.mk files to come from the
source tree in src/share/mk. This was bound to break sooner or later.
Submitted by: Dmitrij Tejblum <dima@tejblum.dnttm.rssi.ru>
everything that a full install would (modulo bugs in rpcsvc/Makefile).
The missing things weren't used (except for mp.h from libmp), but
there are relatively few of them and it's easier to be complete.
call the 'symlinks' target to build the /usr/obj/tmp/install/sys tree since
In the includes target, call the header install target explicitly and then
call the 'symlinks' target to build the /usr/obj/tmp/install/sys tree since
we set this up manually earlier, and if we do a 'make all install', we
replace the symlink tree in the obj dirs with new copies of the files
which breaks any chance of -DNOCLEAN working.
a couple *.mk files to enable -current world building on really old
machines (e.g., 2.1.5).
Reviewed by: too many many people to list here, special thanks to bde
tree) instead of the system default ones in /usr/share/mk. This
only works for makes run from the top level, and a few not too out
of date system makefiles must be present to start up. Bootstraps
from can still be done from scratch by giving the path to an up to
date share/mk on the command line.
Removed bootstrap `mk' target and use of it. The bootstrap didn't
actually work for the non-null DESTDIR case.
instead of in the middle of it. Soon, "c++rt0.o" will be linked
into all shared libraries. An up-to-date version of it must be in
place before any shared libraries are built.
This is one piece of the solution for PR gnu/3035 (gcc -shared).
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.
Boy, I'm glad we're not using sup anymore. This update would have been
insane otherwise.
MK_FLAGS contains -DNOMAN and -DNOPROFILE for speed, so I assume
NOINFO is okay as well.
Add gnu/usr.bin/texinfo to build-tools so everything does the right
thing.
directory. Also, add gnu/usr.bin/as to the lib-tools target since libgcc
generates weak symbols, and libstdc++/libg++ use them. ie: coming from a
2.1.x system will fail without 'as'.
worked for me, but no guarantees yet.
Basically, move cc earlier to lib-tools target, before libraries are
built. libgcc is built at the same time, so it's special entry is
removed from the libraries target. Also, add bison/gperf immediately
before cc, since they are needed to build cc and are not present on an
earler-than-2.2 system. (libgcc is partly built with the freshly compiled
gcc-2.7.2.1, since it uses __attribute__'s that were not present until now)
This _should_ be enough to get running from older releases, perhaps as far
back as 2.0.5.
for bootstrap" tweak to the lex Makefile to stop it building the library
too early.
This untangles things a bit more, it stops new bootstraps failing because
libl/libfl uses 'ld -O' before ld is updated.
because lex has a library (libln.a) and bsd.lib.mk has been modified to use
'tsort -q'. Tsort has not been build yet...
tsort should be before lex. [Whoops! Thanks! -jkh]
Submitted-By: roberto@keltia.freenix.fr (Ollivier Robert)
readable, as well as fix up some of the warts along the way. Among the
things fixed is the infamous "cd foo && make depend all install" bogon,
which is particularly important for users of the -DNOCLEAN option.
Also, a few typo and DESTDIR fixes and a -DNOGAMES hack from Gary Jennejohn.
