ISA PNP card support (replace by hand version in if_ed). Move module
declarations to the end of some files. Fix PCCARD_PNP_INFO to use
nitems(). Remove some stale comments about pc98, turns out the comment
was simply wrong.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
The previous change to split the worker thread start out of fdc_attach()
did not start the worker thread if the fdc device in the ACPI namespace
did not have an _FDE method. This fixes hangs when booting with a
floppy controller enabled on certain machines with ACPI.
Tested by: joel
- Enable the commented out locking in fd_probe(). The worker thread
should not be running yet (even after these changes), but better to be
safe than sorry.
- Defer starting the worker thread until after the child drives have been
probed. The worker thread startup is moved into a fdc_start_worker()
thread that the various front ends call at the end of attach. As a
side effect this fixes a few edge cases that weren't shutting down the
worker thread if attach encountered a late failure.
- When executing the initial reset requested by attach in the worker
thread, use DELAY() instead of a tsleep() if cold is set.
Tested by: Howard Su <howard0su@gmail.com>
Sponsored by: Netflix
The fdc worker thread was using a one second timeout while waiting for
a new bio to arrive or for the device to detach. However, the driver
already does a wakeup when queueing a new bio or asking the thread to
detach, so the timeout only served to waste CPU time waking up the
thread once a second just so it could go right back to sleep. Use an
infinite timeout instead.
Discussed with: phk
Sponsored by: Netflix
tracks and 10 sectors per track. More exotic RX-50 types not
supported, nor is there support for de-interleaving the first two
tracks where the physical sectors are 0 1 2 3 4 5 6 7 8 9, but they
should be interpreted as 0 5 1 6 2 7 3 8 4 9. This is purely to read
the media with dd. The FAT that's on these disks won't work with
msdosfs anyway.
Most calls to bus_alloc_resource() use "anywhere" as the range, with a given
count. Migrate these to use the new bus_alloc_resource_anywhere() API.
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D5370
block. Use it in all the PNP drivers to export either the current PNP
table. For uart, create a custom table and export it using
MODULE_PNP_INFO since it's the only one that matches on function
number.
Differential Review: https://reviews.freebsd.org/D3461
It is needed for fdread(1) in order to be able to recover from CRC
errors in the data field of a floppy sector (by returning the sector
data that failed CRC, rather than inventing dummy data).
When closing the device, clear all transient device options.
MFC after: 1 week
breaks the "2step" feature of the driver, e.g. in order to read 360
KiB media on a 1200 KiB drive.
As the only potential advantage of implied (vs. explicit) seeks is to
minimize the software effort, yet our driver always contained the
logic needed for explicit seeks, simply dropping implied seeks is the
best solution without introducing risks for new bugs. There is no
performance penalty, reading a 1440 KiB medium takes exactly the same
time with both, implied or explicit seeks.
MFC after: 1 week
If I interpret the C standard correctly, the storage specifier should be
placed before the inline keyword. While at it, replace __inline by
inline in the files affected.
The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.
I removed too many lines and a wrong pointer was accidentally passed down.
Tested by: Scott Allendorf (scott-allendorf at uiowa dot edu), kib
MFC after: 3 days
functions are selfcontained (ie. they touch only isa_dma.c static variables
and hardware) so a private lock is sufficient to prevent races. This changes
only i386/amd64 while there are also isa_dma functions for ia64/sparc64.
Sparc64 are ones empty stubs and ia64 ones are unused as ia64 does not
have isa (says marcel).
This patch removes explicit locking of Giant from a few drivers (there
are some that requires this but lack ones - this patch fixes this) and
also removes the need for implicit locking of Giant from attach routines
where it's provided by newbus.
Approved by: ed (mentor, implicit)
Reviewed by: jhb, attilio (glanced by)
Tested by: Giovanni Trematerra <giovanni.trematerra gmail com>
IA64 clue: marcel
- Tear down the interrupt handler before killing the worker thread.
- Do geom withering as GEOM event to avoid acquiring the GEOM topology
lock under Giant.
PR: kern/104079
Reviewed by: joerg
Approved by: trasz (mentor)
longer useful for the FD_STYPE and FD_SOPTS ioctls to insist on being
issued on a writable file descriptor. Otherwise, there's no longer a
chance to set the drive type or options when a read-only medium is
present in the drive, as there is no way to obtain a writable fd then.
- If the flag is set and auto-select fails, assume disk is not present.
- Set disk empty flag only when the floppy controller reset is needed.
It fixes regression introduced in r1.311, which prevented it from ignoring
errors. Now fdformat(1) and dd(1) with conv=noerror option can continue
when read/write errors occur as they should.
- Do not retry disk probing as it is extremely slow and pointless.
- Move the disk probing code into a separate function.
- Do not reset disk empty flag if write-protect check fails somehow.
PR: kern/116538[1]
a panic race on module unload. The wakeup() is internal to
kproc_exit/kthread_exit. The correct fix is to fix the msleep() in
detach to sleep on fdc->fdc_thread instead of &fdc->fdc_thread.
Noted and reviewed by: jhb
Pointy hat to: kib
MFC after: 1 week
Wakeup the thread doing the fdc_detach() when the fdc worker thread exits [1].
Write access to the write-protected floppy shall call device_unbusy() to
pair the device_busy() in the fd_access() [2].
PR: 116537 [1], 116539 [2]
MFC after: 1 week
to kproc_xxx as they actually make whole processes.
Thos makes way for us to add REAL kthread_create() and friends
that actually make theads. it turns out that most of these
calls actually end up being moved back to the thread version
when it's added. but we need to make this cosmetic change first.
I'd LOVE to do this rename in 7.0 so that we can eventually MFC the
new kthread_xxx() calls.
specific privilege names to a broad range of privileges. These may
require some future tweaking.
Sponsored by: nCircle Network Security, Inc.
Obtained from: TrustedBSD Project
Discussed on: arch@
Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri,
Alex Lyashkov <umka at sevcity dot net>,
Skip Ford <skip dot ford at verizon dot net>,
Antoine Brodin <antoine dot brodin at laposte dot net>
significantly reduces booting time when there is broken floppy disk drive,
controller, cable, BIOS, etc.
When the floppy controller interface is correctly implemented, disk change
signal (DSKCHG) is reflected in the Digital Input Register (DIR) at 0x3f7.
However, there are many cases that the signal is unusable. Moreover, some
BIOS does not reserve the port at all. In those cases, the register may not
function.
Use it to reset controller and to select data rate. According to Intel
80277AA datasheet, software reset behaves the same as DOR reset except
that it is self clearing. National Semiconductor PC8477B datasheet says
the same. As a side effect, we no longer use Configuration Control
Register (CCR) at 0x3f7 for these controllers, which is often missing
in modern hardware.
mutex.
- Don't use callout_drain() to stop the toffhandle callout while holding the
fdc mutex (this could deadlock) in functions called from softclock
(callouts aren't allowed to do voluntary sleeps). Instead, use
callout_stop(). Note that since we hold the associated mutex and are now
using callout_init_mtx(), callout_stop() is just as effective as
callout_drain(). (Though callout_drain() is still needed in detach to
make sure softclock isn't contesting on our mutex before we destroy the
mutex.)
- Remove unused callout 'tohandle' from softc.
MFC after: 1 week
