- Detach the gpiobus and the gpioc devices from the GPIO controller.
- Fix the leak of gpiobus IRQ rman(9) region descriptor.
- Fix the leak of child ivars and IRQ resource list.
While here return NULL (instead of 0) for a device_t that fails to allocate
the ivar memory.
Tested with gpiobus built as a module.
Sponsored by: Rubicon Communications (Netgate)
if desired.
Retire randomdev_none.c and introduce random_infra.c for resident
infrastructure. Completely stub out random(4) calls in the "without
DEV_RANDOM" case.
Add RANDOM_LOADABLE option to allow loadable Yarrow/Fortuna/LocallyWritten
algorithm. Add a skeleton "other" algorithm framework for folks
to add their own processing code. NIST, anyone?
Retire the RANDOM_DUMMY option.
Build modules for Yarrow, Fortuna and "other".
Use atomics for the live entropy rate-tracking.
Convert ints to bools for the 'seeded' logic.
Move _write() function from the algorithm-specific areas to randomdev.c
Get rid of reseed() function - it is unused.
Tidy up the opt_*.h includes.
Update documentation for random(4) modules.
Fix test program (reviewers, please leave this).
Differential Revision: https://reviews.freebsd.org/D3354
Reviewed by: wblock,delphij,jmg,bjk
Approved by: so (/dev/random blanket)
doesn't get overrun by things like NFS that can and do shove more than 32 segs when
being used with em(4) and TSO4.
Update tso handling code in em_xmit() with update from jhb@ in email thread:
https://lists.freebsd.org/pipermail/freebsd-net/2014-July/039306.html
set ifp->if_hw_tsomax, ifp->if_hw_tsomaxsegcount & ifp->if_hw_tsomaxsegsize
to appropriate values.
Define a TSO workaround "magic" number of 4 that is used to avoid an
alignment issue in hardware.
Change a couple of integer values that were used as booleans to actual
bool types.
Ensure that em_enable_intr() enables the appropriate mask of interrupts
and not just a hardcoded define of values.
PR: 200221 199174 195078
Differential Revision: https://reviews.freebsd.org/D3192
Reviewed by: erj jhb hiren
MFC after: 2 weeks
Sponsored by: Limelight Networks
After CAM replaced old ATA stack, this driver processes no more then one
request at a time per channel. Using UMA after that is overkill, so
replace it with simple preallocation of one request per channel.
MFC after: 2 weeks
horizonal resolution (width). In those cases fb_bpp ended up
completely wrong -- as in 6 bytes per pixel or something like
that. Since we already have a way to calculate fb_depth given
the masks and fb_bpp is effectively the same as fb_depth, all
we need to do is make sure fb_bpp is rounded to the next
multiple of the number of bits in a byte -- we assume we can
divide by the number of bits in a byte throughout vt(4).
While here:
- simplify how we calculate fb_depth.
- use fb_bpp instead of fb_depth to calculate fb_stride;
we know we can divide fb_bpp.
- don't limit fb_width and fb_height by VT_FB_DEFAULT_WIDTH
and VT_FB_DEFAULT_HEIGHT (resp.). Those constants have
not relation to the size of the frame buffer.
This at least fixes "lower-resolution" Macs. We're talking
1280x1024 or so. There still is a problem with 27" Macs,
which typically have a horizontal resolution over 2K.
PR: 193745 (partial)
Ok'd by: emaste@
intervals less than 250us was not handled properly. Add support for
high-bandwidth ISOCHRONOUS packets. USB webcams, USB audio and USB DVB
devices are expected to work better. High-bandwidth INTERRUPT
endpoints is not yet supported.
MFC after: 2 weeks
the kernel is tapping an USB transfer. This leads to a NULL pointer
access. The solution is to only trace while the USB bus lock is
locked.
MFC after: 2 weeks
like RPI-B and RPI-2.
Description of problem:
USB transfers can process data in their callbacks sometimes causing
unacceptable latency for other USB transfers. Separate BULK completion
callbacks from CONTROL, INTERRUPT and ISOCHRONOUS callbacks, and give
BULK completion callbacks lesser execution priority than the
others. This way USB audio won't be interfered by heavy USB ethernet
usage for example.
Further serve USB transfer completion in a round robin fashion,
instead of only serving the most CPU hungry. This has been done by
adding a third flag to USB transfer queue structure which keeps track
of looping callbacks. The "command" callback function then decides
what to do when looping.
MFC after: 2 weeks
root disk. The embedded image is linked into the kernel in the .mfs
section.
Add rules and variables to kern.pre.mk and kern.post.mk that handle the
linking of the image. First objcopy is used to generate an object file.
Then, the object file is linked into the kernel.
Submitted by: Steve Kiernan <stevek@juniper.net>
Reviewed by: brooks@
Obtained from: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D2903
We first map 64KB at 0xA0000 and then determine whether to work
in text or graphics mode. When graphics mode, the mapping is
precisely what we need and everything is fine. But text mode,
has the frame buffer relocated to 0xB8000. We didn't map that
much to safely add 0x18000 bytes to the base address.
Now we first check whether to work in text or graphics mode and
then map the frame buffer at the right address and with the
right size (0xA0000+64KB for graphics, 0xB8000+32KB for text).
PR: 202276
Tested by: ed@
frame buffers and memory mapped UARTs.
1. Delay calling cninit() until after pmap_bootstrap(). This makes
sure we have PMAP initialized enough to add translations. Keep
kdb_init() after cninit() so that we have console when we need
to break into the debugger on boot.
2. Unfortunately, the ATPIC code had be moved as well so as to
avoid a spurious trap #30. The reason for which is not known
at this time.
3. In pmap_mapdev_attr(), when we need to map a device prior to the
VM system being initialized, use virtual_avail as the KVA to map
the device at. In particular, avoid using the direct map on amd64
because we can't demote by virtue of not being able to allocate
yet. Keep track of the translation.
Re-use the translation after the VM has been initialized to not
waste KVA and to satisfy the assumption in uart(4) that the handle
returned for the low-level console is the same as later returned
when the device is probed and attached.
4. In pmap_unmapdev() remove the mapping from the table when called
pre-init. Otherwise keep the mapping. During bus probe and attach
device resources are mapped and unmapped multiple times, which
would have us destroy the mapping used by the low-level console.
5. In pmap_init(), set pmap_initialized to signal that we're not
pre-init anymore. On amd64, bring the direct map in sync with the
translations created at that time.
6. Implement bus_space_map() and bus_space_unmap() for real: when
the tag corresponds to memory space, call the corresponding
pmap_mapdev() and pmap_unmapdev() functions to construct and
actual handle.
7. In efifb.c and vt_vga.c, remove the crutches and hacks and simply
call pmap_mapdev_attr() or bus_space_map() as desired.
Notes:
1. uart(4) already used bus_space_map() during low-level console
setup but since serial ports have traditionally been I/O port
based, the lack of a proper implementation for said function
was not a problem. It has always supported memory mapped UARTs
for low-level consoles by setting hw.uart.console accordingly.
2. The use of the direct map on amd64 without setting caching
attributes has been a bigger problem than previously thought.
This change has the fortunate (and unexpected) side-effect of
fixing various EFI frame buffer problems (though not all).
PR: 191564, 194952
Special thanks to:
1. XipLink, Inc -- generously donated an Intel Bay Trail E3800
based eval board (ADLE3800PC).
2. The FreeBSD Foundation, in particular emaste@ -- for UEFI
support in general and testing.
3. Everyone who tested the proposed for PR 191564.
4. jhb@ and kib@ for being a soundboard and applying a clue bat
if so needed.
define GID_VIDEO in sys/conf.h, and use it together with UID_ROOT
to define DRM_DEV_UID and DRM_DEV_GID in the drmP.h files.
So there is one place where the UID's and GID's are defined.
Submitted by: ed@
Reviewed by: ed@, dumbbell@
Differential Revision: https://reviews.freebsd.org/D3360
can be seen as the same as 0.2. There are changes with the data passed to
CPU_SUSPEND, however we don't yet use this call.
Sponsored by: ABT Systems Ltd
electrical signals on the serial port. Virtually all devices which output a
PPS signal generate a brief higher-voltage pulse, the leading edge of which
is the on-time point.
Both DCD and CTS are active-low signals on the wire, meaning the assertion
of their status bits in the modem status register corresponds to the lower
voltage level on the wire. So when the status bit transitions to not-set,
create a PPS assert event; when the status bit transitions to set, create a
PPS clear event.
eliminating the need to build a custom kernel to use the CTS signal.
The historical UART_PPS_ON_CTS kernel option is still honored, but now it
can be overridden at runtime using a tunable to configure all uart devices
(hw.uart.pps_mode) or specific devices (dev.uart.#.pps_mode). The per-
device config is both a tunable and a writable sysctl.
This syncs the PPS capabilities of uart(4) with the enhancements recently
recently added to ucom(4) for capturing from USB serial devices.
Relnotes: yes
devices in /dev/dri/ with this new group.
This will allow ports and users to more easily access to these devices
for OpenGL and OpenCL support.
Reviewed by: dumbbell@
Approved by: dumbbell@
Differential Revision: https://reviews.freebsd.org/D1260
Internal bridges in Cavium ThunderX SoC behave as subtractive,
but they are unable to be identified. Force setting an appropriate
flag.
Reviewed by: emaste, imp
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3277
time_pps_fetch() to be used in blocking mode.
Also, don't init the pps api for system devices (consoles) that provide a
custom attach routine. The device may actually be a keyboard or other non-
tty device. If it wants to do pps processing (unlikely) it must handle
everything for itself. (In reality, only a sun keyboard uses a custom
attach routine, and it doesn't make a good pps device.)
For some reason 32-bit PIO writes are not working on 6Gbit/s Intel SATA
ports, while 16/32-bit PIO reads and 16-bit PIO writes are working fine.
3Gbit/s ports on the same controllers have no this problem.
Workaround this by disabling 32-bit PIO for all Intel controllers that may
have 6Gbit/s ports. It halves PIO performance from 6MB/s to 3MB/s, but
who bother about speed of such rare and slow mode, which is also highly
discouraged by SATA specifications?
MFC after: 2 weeks
There are still several bugs, but I've been using it for a while now.
Thanks to all the testers and to Adrian for his help with this
driver.
This driver isn't connected to the build yet, but it will be soon.
There's no MFC planned because the driver isn't very stable yet.
Reviewed by: adrian
Obtained from: https://github.com/rpaulo/iwm
Tested by: adrian, gjb, dumbbell (others that I forgot).
Relnotes: yes
* 286410
* 286413
* 286416
The initial commit broke a variety of debug and features that aren't
in the GENERIC kernels but are enabled in other platforms.
Main problem there was PIO mode support, that required KVA mapping.
Handle that case using recently added pmap_quick_enter_page(9) KPI,
mapping data pages to KVA one at a time.
with the net80211 stack.
Historical background: originally wireless devices created an interface,
just like Ethernet devices do. Name of an interface matched the name of
the driver that created. Later, wlan(4) layer was introduced, and the
wlanX interfaces become the actual interface, leaving original ones as
"a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer
and a driver became a mix of methods that pass a pointer to struct ifnet
as identifier and methods that pass pointer to struct ieee80211com. From
user point of view, the parent interface just hangs on in the ifconfig
list, and user can't do anything useful with it.
Now, the struct ifnet goes away. The struct ieee80211com is the only
KPI between a device driver and net80211. Details:
- The struct ieee80211com is embedded into drivers softc.
- Packets are sent via new ic_transmit method, which is very much like
the previous if_transmit.
- Bringing parent up/down is done via new ic_parent method, which notifies
driver about any changes: number of wlan(4) interfaces, number of them
in promisc or allmulti state.
- Device specific ioctls (if any) are received on new ic_ioctl method.
- Packets/errors accounting are done by the stack. In certain cases, when
driver experiences errors and can not attribute them to any specific
interface, driver updates ic_oerrors or ic_ierrors counters.
Details on interface configuration with new world order:
- A sequence of commands needed to bring up wireless DOESN"T change.
- /etc/rc.conf parameters DON'T change.
- List of devices that can be used to create wlan(4) interfaces is
now provided by net.wlan.devices sysctl.
Most drivers in this change were converted by me, except of wpi(4),
that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing
changes to at least 8 drivers. Thanks to Olivier Cochard, gjb@, mmoll@,
op@ and lev@, who also participated in testing. Details here:
https://wiki.freebsd.org/projects/ifnet/net80211
Still, drivers: ndis, wtap, mwl, ipw, bwn, wi, upgt, uath were not
tested. Changes to mwl, ipw, bwn, wi, upgt are trivial and chances
of problems are low. The wtap wasn't compilable even before this change.
But the ndis driver is complex, and it is likely to be broken with this
commit. Help with testing and debugging it is appreciated.
Differential Revision: D2655, D2740
Sponsored by: Nginx, Inc.
Sponsored by: Netflix
The ftdi chip itself has a "get bitmode" command that doesn't actually
return the current bitmode, just a snapshot of the gpio lines. The chip
apparently has no way to provide the current bitmode.
This implements the functionality at the driver level. The driver starts
out assuming the chip is in UART mode (which it will be, coming out of
reset) and keeps track of every successful set-bitmode operation so that
it can always return the current mode with UFTDIIOC_GET_BITMODE.
use vtophys() directly instead of vtomach() and retire the no-longer-used
headers <machine/xenfunc.h> and <machine/xenvar.h>.
Reported by: bde (stale bits in <machine/xenfunc.h>)
Reviewed by: royger (earlier version)
Differential Revision: https://reviews.freebsd.org/D3266
