through the FreeBSD ABI. IPC_INFO, SHM_INFO, SHM_STAT were added
specifically for Linux binary support. They are not documented
as being a part of the FreeBSD ABI, also, the structures necessary
for them have been hidden away from the users for a long time.
Also, the Linux ABI layer uses it's own structures to populate the
responses back to the user to ensure that the ABI is consistent.
I think there is a bit more separation work that needs to happen.
Reviewed by: jhb
Discussed with: jhb
Discussed on: freebsd-arch@ (very briefly)
MFC after: 1 month
from Mac OS X Leopard--rationalize naming for entry points to
the following general forms:
mac_<object>_<method/action>
mac_<object>_check_<method/action>
The previous naming scheme was inconsistent and mostly
reversed from the new scheme. Also, make object types more
consistent and remove spaces from object types that contain
multiple parts ("posix_sem" -> "posixsem") to make mechanical
parsing easier. Introduce a new "netinet" object type for
certain IPv4/IPv6-related methods. Also simplify, slightly,
some entry point names.
All MAC policy modules will need to be recompiled, and modules
not updates as part of this commit will need to be modified to
conform to the new KPI.
Sponsored by: SPARTA (original patches against Mac OS X)
Obtained from: TrustedBSD Project, Apple Computer
- Remove also "MP SAFE" after prior "MPSAFE" pass. (suggested by bde)
- Remove extra blank lines in some cases.
- Add extra blank lines in some cases.
- Remove no-op comments consisting solely of the function name, the word
"syscall", or the system call name.
- Add punctuation.
- Re-wrap some comments.
system calls now enter without Giant held, and then in some cases, acquire
Giant explicitly.
Remove a number of other MPSAFE annotations in the credential code and
tweak one or two other adjacent comments.
ignored on other systems I investigated when accessing an existing
memory segment rather than creating a new one. This call to ipcperm()
is the only one to pass in a complete mode flag to the permission
checks rather than a simple access request mask, and caused problems
for the revised ipcperm() based on the priv(9) interface, which can
now be restored.
PR: 106078
begun with a repo-copy of mac.h to mac_framework.h. sys/mac.h now
contains the userspace and user<->kernel API and definitions, with all
in-kernel interfaces moved to mac_framework.h, which is now included
across most of the kernel instead.
This change is the first step in a larger cleanup and sweep of MAC
Framework interfaces in the kernel, and will not be MFC'd.
Obtained from: TrustedBSD Project
Sponsored by: SPARTA
appears to be serving a useful purpose, as it was used during initial
development of MAC support for System V IPC.
MFC after: 1 month
Obtained from: TrustedBSD Project
Suggested by: Christopher dot Vance at SPARTA dot com
- Move sonewconn(), which creates new sockets for incoming connections on
listen sockets, so that all socket allocate code is together in
uipc_socket.c.
- Move 'maxsockets' and associated sysctls to uipc_socket.c with the
socket allocation code.
- Move kern.ipc sysctl node to uipc_socket.c, add a SYSCTL_DECL() for it
to sysctl.h and remove lots of scattered implementations in various
IPC modules.
- Sort sodealloc() after soalloc() in uipc_socket.c for dependency order
reasons. Statisticize soalloc() and sodealloc() as they are now
required only in uipc_socket.c, and are internal to the socket
implementation.
After this change, socket allocation and deallocation is entirely
centralized in one file, and uipc_socket2.c consists entirely of socket
buffer manipulation and default protocol switch functions.
MFC after: 1 month
the MAC result, as well as avoid losing the DAC check result when MAC
is enabled.
MFC after: 3 days
Reported by: Patrick LeBlanc <Patrick dot LeBlanc at sparta dot com>
integer to an unsigned long. This lifts variables like the maximum
number of pages available for shared memory from 2^31 to 2^32 on 32
bit architectures, and from 2^31 to 2^64 on 64 bit architectures.
It should be noted that this changes breaks ABI on 64 bit architectures
because the size of the shmmax, shmmin, shmmni, shmseg and shmall members
of the shminfo structure has changed.
Silence on: current@
This information will be very useful for people who are tuning applications
which have a dependence on IPC mechanisms.
The following OIDs were documented:
Message queues:
kern.ipc.msgmax
kern.ipc.msgmni
kern.ipc.msgmnb
kern.ipc.msgtlq
kern.ipc.msgssz
kern.ipc.msgseg
Semaphores:
kern.ipc.semmap
kern.ipc.semmni
kern.ipc.semmns
kern.ipc.semmnu
kern.ipc.semmsl
kern.ipc.semopm
kern.ipc.semume
kern.ipc.semusz
kern.ipc.semvmx
kern.ipc.semaem
Shared memory:
kern.ipc.shmmax
kern.ipc.shmmin
kern.ipc.shmmni
kern.ipc.shmseg
kern.ipc.shmall
kern.ipc.shm_use_phys
kern.ipc.shm_allow_removed
kern.ipc.shmsegs
These new descriptions can be viewed using sysctl -d
PR: kern/65219
Submitted by: Dan Nelson <dnelson at allantgroup dot com> (modified)
No objections: developers@
Descriptions reviewed by: gnn
MFC after: 1 week
to be modified and extended without breaking the user space ABI:
Use _kernel variants on _ds structures for System V sempahores, message
queues, and shared memory. When interfacing with userspace, export
only the _ds subsets of the _kernel data structures. A lot of search
and replace.
Define the message structure in the _KERNEL portion of msg.h so that it
can be used by other kernel consumers, but not exposed to user space.
Submitted by: Dandekar Hrishikesh <rishi_dandekar at sbcglobal dot net>
Obtained from: TrustedBSD Project
Sponsored by: DARPA, SPAWAR, McAfee Research
- Push down Giant into shmexit(). (Giant is acquired only if the vmspace
contains shm segments.)
- Eliminate the acquisition of Giant from proc_rwmem().
- Reduce the scope of Giant in exit1(), uncovering the destruction of the
address space.
to vm_map_find() that is less likely to be outside of addressable memory
for 32-bit processes: just past the end of the largest possible heap.
This is the same hint that mmap() uses.
failed, the reference count for the virtual memory object referenced
by the specified shared memory segment would have been erroneously
incremented.
Reported by: Joost Pol <joost@pine.nl>
1.36 +73 -60 src/sys/compat/linux/linux_ipc.c
1.83 +102 -48 src/sys/kern/sysv_shm.c
1.8 +4 -0 src/sys/sys/syscallsubr.h
That change was intended to support vmware3, but
wantrem parameter is useless because vmware3 uses SYSV shared memory
to talk with X server and X server is native application.
The patch worked because check for wantrem was not valid
(wantrem and SHMSEG_REMOVED was never checked for SHMSEG_ALLOCATED segments).
Add kern.ipc.shm_allow_removed (integer, rw) sysctl (default 0) which when set
to 1 allows to return removed segments in
shm_find_segment_by_shmid() and shm_find_segment_by_shmidx().
MFC after: 1 week
argument to the functions shm{at,ctl}1 and shm_find_segment_by_shmid{x}.
The BSD semantics didn't allow the usage of shared segment after
being marked for removal through IPC_RMID.
The patch involves the following functions:
- shmat
- shmctl
- shm_find_segment_by_shmid
- shm_find_segment_by_shmidx
- linux_shmat
- linux_shmctl
Submitted by: Orlando Bassotto <orlando.bassotto@ieo-research.it>
Reviewed by: marcel
dereferenced when a process exits due to the vmspace ref-count being
bumped. Change shmexit() and shmexit_myhook() to take a vmspace instead
of a process and call it in vmspace_dofree(). This way if it is missed
in exit1()'s early-resource-free it will still be caught when the zombie is
reaped.
Also fix a potential race in shmexit_myhook() by NULLing out
vmspace->vm_shm prior to calling shm_delete_mapping() and free().
MFC after: 7 days
- Move jail checks and some other checks involving constants and stack
variables out from under Giant. This isn't perfectly safe atm because
jail_sysvipc_allowed is read w/o a lock meaning that its value could be
stale. This global variable will soon become a per-jail flag, however,
at which time it will either not need a lock or will use the prison lock.
Remove the explicit call to aio_proc_rundown() from exit1(), instead AIO
will use at_exit(9).
Add functions at_exec(9), rm_at_exec(9) which function nearly the
same as at_exec(9) and rm_at_exec(9), these functions are called
on behalf of modules at the time of execve(2) after the image
activator has run.
Use a modified version of tegge's suggestion via at_exec(9) to close
an exploitable race in AIO.
Fix SYSCALL_MODULE_HELPER such that it's archetecuterally neutral,
the problem was that one had to pass it a paramater indicating the
number of arguments which were actually the number of "int". Fix
it by using an inline version of the AS macro against the syscall
arguments. (AS should be available globally but we'll get to that
later.)
Add a primative system for dynamically adding kqueue ops, it's really
not as sophisticated as it should be, but I'll discuss with jlemon when
he's around.
Reviewed by: audit
Add tunables for the sem* and shm* syscontrols for tuning on boottime
until they become dynamic.
SAP R/3 doesn't like the compiled in defaults.
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.
Sorry john! (your next MFC will be a doosie!)
Reviewed by: peter@freebsd.org, dillon@freebsd.org
X-MFC after: ha ha ha ha
