ofw_bus_gen_get_*() for providing the ofw_bus KOBJ interface in order
to reduce code duplication.
- While here sync the various sparc64 bus drivers a bit (handle failure
to attach a child gracefully instead of panicing, move the printing
of child resources common to bus_print_child() and bus_probe_nomatch()
implementations of a bus into a <bus>_print_res() function, ...) and
fix some minor bugs and nits (plug memory leaks present when attaching
a bus or child device fails, remove unused struct members, ...).
Additional testing by: kris (central(4) and fhc(4))
front-end and the LSI64854 and NCR53C9x code in case one of these
functions fails. Add detach functions to these parts and make esp(4)
detachable.
- Revert rev. 1.7 of esp_sbus.c, since rev. 1.34 of sbus.c the clockfreq
IVAR defaults to the per-child values.
- Merge ncr53c9x.c rev. 1.111 from NetBSD (partial):
On reset, clear state flags and the msgout queue.
In NetBSD code to notify the upper layer (i.e. CAM in FreeBSD) on reset
was also added with this revision. This is believed to be not necessary
in FreeBSD and was not merged.
This makes ncr53c9x.c to be in sync with NetBSD up to rev. 1.114.
- Conditionalize the LSI64854 support on sbus(4) only instead of sbus(4)
and esp(4) as it's also required for the 'dma', 'espdma' and 'ledma'
busses/devices as well as the 'SUNW,bpp' device (printer port) which
all hang off of sbus(4).
- Add a driver for the 'dma', 'espdma' and 'ledma' (pseudo-)busses/
devices. These busses and devices actually represent the LSI64854 DMA
engines for the ESP SCSI and LANCE Ethernet controllers found on the
SBus of Ultra 1 and SBus add-on cards. With 'espdma' and 'ledma' the
'esp' and 'le' devices hang off of the respective DMA bus instead of
directly from the SBus. The 'dma' devices are either also used in this
manner or on some add-on cards also as a companion device to an 'esp'
device which also hangs off directly from the SBus. With the latter
variant it's a bit tricky to glue the DMA engine to the core logic of
the respective 'esp' device. With rev. 1.35 of sbus.c we are however
guaranteed that such a 'dma' device is probed before the respective
'esp' device which simplifies things a lot. [1]
- In the esp(4) SBus front-end read the part-unique ID code of Fast-SCSI
capable chips the right way. This fixes erroneously detecting some
chips as FAS366 when in fact they are not. Add explicit checks for the
FAS100A, FAS216 and FAS236 variants instead treating all of these as
ESP200. That way we can correctly set the respective Fast-SCSI config
bits instead of driving them out of specs. This includes adding the
FAS100A and FAS236 variants to the NCR53C9x core code. We probably
still subsume some chip variants as ESP200 while in fact they are
another variant which however shouldn't really matter as this will
only happen when these chips are driven at 25MHz or less which implies
not being able to run Fast-SCSI. [3]
- Add a workaround to the NCR53C9x interrupt handler which ignores the
stray interrupt generated by FAS100A when doing path inquiry during
boot and which otherwiese would trigger a panic.
- Add support for the 'esp' devices hanging off of a 'dma' or 'espdma'
busses or which are companions of 'dma' devices to esp(4). In case of
the variants that hang off of a DMA device this is a bit hackish as
esp(4) then directly uses the softc of the respective parent to talk
to the DMA engine. It might make sense to add an interface for this
in order to implement this in a cleaner way however it's not yet clear
how the requirements for the LANCE Ethernet controllers are and the
hack works for now. [2]
This effectively adds support for the onboard SCSI controller in
Ultra 1 as well as most of the ESP-based SBus add-on cards to esp(4).
With this the code for supporting the Performance Technologies SBS430
SBus SCSI add-on cards is also largely in place the remaining bits
were however omitted as it's unclear from the NetBSD how to couple
the DMA engine and the core logic together for these cards.
Obtained from: OpenBSD [1]
Obtained from: NetBSD [2]
Clue from: BSD/OS [3]
Reviewed by: scottl (earlier version)
Tested with: FSBE/S add-on card (FAS236), SSHA add-on card (ESP100A),
Ultra 1 (onboard FAS100A), Ultra 2 (onboard FAS366)
device and which also applies to the children. This is very usefull for
drivers for the various subordinate busses so they don't need to fiddle
with the OFW node of their parent themselves. As SBus busses hang of the
nexus and we don't use the ofw_bus interface for nexus devices, yet, this
would also require special knowledge about this in the drivers for the
SBus children which these shouldn't need to have.
This includes switching to use an unshifted IGN in the sc_ign member of
the sbus(4) softc internally.
- For SBus child devices where there are variants that are actually split
split into two SBus devices (as opposed to the first half of the device
being a SBus device and the second half hanging off of the first one)
like 'auxio' and 'SUNW,fdtwo' or 'dma' and 'esp' probe the SBus device
which is a prerequisite to the driver attaching to the second one with
a lower order. This saves us from dealing with different probe orders
in the respective device drivers which generally is more hackish.
- Remove a stale comment about the 'specials' array above the attaching
of the child devices. This is a remnant of the NetBSD/sparc origin of
this code. There the 'specials' array is also used to probe certain
devices which are prerequisites to others first. Why NetBSD soley
relies on the devices having the expected order in the OFW tree on
sparc64 isn't clear to me, as far as I can tell OFW doesn't guaranteed
such things.
- Merge lsi64854.c rev. 1.25 from NetBSD: nuke trailing whitespace.
- Update NetBSD RCS IDs according to what was actually already merged.
- Remove dv_name from the lsi64854_softc and use device_printf() instead.
- Use __func__ instead of hardcoded function names in error messages.
- Use ulmin() instead of min() for comparing the DMA sizes as the values
involved actually are represented by 64bit unsigned instead of 32bit
unsigned. As far as I can't tell this doesn't make a difference in
practice though.
- Some style(9) fixes (mainly indentation).
- Remove unnecessary braces.
at their old location in sys/dev/esp after they were repo-copied to
sys/sparc64/sbus at rev. 1.1:
sys/dev/esp/lsi64854.c rev. 1.2
sys/dev/esp/lsi64854var.h rev. 1.2
Add some style(9) touch ups; style(9) states that new code should follow
these conventions and, well, this is a new driver.
Tested on: i386, sparc64
Reviewed by: scottl
with the attaching of the children done in the bus attach function like
it's supposed to be.
- In the bus probe nomatch function print the resources of the children
like it's done in the other sparc64 specific bus drivers.
- For the clock frequency IVAR use the per-child values and fall back to
the bus default in case a child doesn't have the respective property
instead of always using the bus default so a child driver doesn't need
to obtain the per-child value itself (see also the commit message of
sys/dev/esp/esp_sbus.c rev. 1.7).
- Add support for pass-through allocations. The comment preceding
sbus_alloc_resource() wasn't quite correct, we need to support pass-
through allocations for the 'espdma' and 'ledma' (pseudo-)busses which
hang off of the SBus in Ultra 1 machines. There can also be actual
bridges like the SBus-to-PCMCIA bridge on the SBus and the XBox (SBus
extension box) probably also involves one.
- Use auto-generated typedefs for the prototypes of the device interface
functions.
- Style(9) fixes (mainly don't use function calls in initializers).
- Use __func__ instead of hardcoded function names in error messages.
- Try to make error messages sound uniform.
- Try to keep the code within 80 columns.
- Correct some typos.
- Correct some function declarations to match their prototypes.
- Remove unused headers, macros and variables.
- Remove a bzero() superfluous due to allocating with M_ZERO.
- Use FBSDID.
subset ("compatible", "device_type", "model" and "name") of the standard
properties in drivers for devices on Open Firmware supported busses. The
standard properties "reg", "interrupts" und "address" are not covered by
this interface because they are only of interest in the respective bridge
code. There's a remaining standard property "status" which is unclear how
to support properly but which also isn't used in FreeBSD at present.
This ofw_bus kobj-interface allows to replace the various (ebus_get_node(),
ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type()
vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one.
This in turn allows to simplify and remove code-duplication in drivers for
devices that can hang off of more than one OFW supported bus.
- Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the
drivers for their children to use the ofw_bus kobj-interface. The IVAR-
interfaces of the Central, EBus and FHC are entirely replaced by this. The
PCI bus driver used its own kobj-interface and now also uses the ofw_bus
one. The IVARs special to the SBus, e.g. for retrieving the burst size,
remain.
Beware: this causes an ABI-breakage for modules of drivers which used the
IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be
recompiled.
The style-inconsistencies introduced in some of the bus drivers will be
fixed by tmm@ in a generic clean-up of the respective drivers later (he
requested to add the changes in the "new" style).
- Convert the powerpc MacIO bus driver and the drivers for its children to
use the ofw_bus kobj-interface. This invloves removing the IVARs related
to the "reg" property which were unused and a leftover from the NetBSD
origini of the code. There's no ABI-breakage caused by this because none
of these driver are currently built as modules.
There are other powerpc bus drivers which can be converted to the ofw_bus
kobj-interface, e.g. the PCI bus driver, which should be done together
with converting powerpc to use the OFW PCI code from sparc64.
- Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take
advantage of the ofw_bus kobj-interface and simplify them a bit.
Reviewed by: grehan, tmm
Approved by: re (scottl)
Discussed with: tmm
Tested with: Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
its primary use is for the FEPS/FAS366 SCSI found in Sun Ultra 1e and 2
machines. Once the pci front-end is ported, this driver can replace the
amd(4) driver.
The code as-is is fairly stable. I've disabled tagged-queueing until I can
figure out a corruption bug related to it. I'm importing it now so that
people with these machines can (finally) stop netbooting and report bugs
before 5.3.
Add two new arguments to bus_dma_tag_create(): lockfunc and lockfuncarg.
Lockfunc allows a driver to provide a function for managing its locking
semantics while using busdma. At the moment, this is used for the
asynchronous busdma_swi and callback mechanism. Two lockfunc implementations
are provided: busdma_lock_mutex() performs standard mutex operations on the
mutex that is specified from lockfuncarg. dftl_lock() is a panic
implementation and is defaulted to when NULL, NULL are passed to
bus_dma_tag_create(). The only time that NULL, NULL should ever be used is
when the driver ensures that bus_dmamap_load() will not be deferred.
Drivers that do not provide their own locking can pass
busdma_lock_mutex,&Giant args in order to preserve the former behaviour.
sparc64 and powerpc do not provide real busdma_swi functions, so this is
largely a noop on those platforms. The busdma_swi on is64 is not properly
locked yet, so warnings will be emitted on this platform when busdma
callback deferrals happen.
If anyone gets panics or warnings from dflt_lock() being called, please
let me know right away.
Reviewed by: tmm, gibbs
- Move prototypes for sparc64-specific helper functions from bus.h to
bus_private.h
- Move the method pointers from struct bus_dma_tag into a separate
structure; this saves some memory, and allows to use a single method
table for each busdma backend, so that the bus drivers need no longer
be changed if the methods tables need to be modified.
- Remove the hierarchical tag method lookup. It was never really useful,
since the layering is fixed, and the current implementations do not
need to call into parent implementations anyway. Each tag inherits
its method table pointer and cookie from the parent (or the root tag)
now, and the method wrapper macros directly use the method table
of the tag.
- Add a method table to the non-IOMMU backend, remove unnecessary
prototypes, remove the extra parent tag argument.
- Rename sparc64_dmamem_alloc_map() and sparc64_dmamem_free_map() to
sparc64_dma_alloc_map() and sparc64_dma_free_map(), move them to a
better place and use them for all map allocations and deallocations.
- Add a method table to the iommu backend, and staticize functions,
remove the extra parent tag argument.
- Change the psycho and sbus drivers to just set cookie and method table
in the root tag.
- Miscellaneous small fixes.
BUS_DMASYNC_ definitions remain as before. The does not change the ABI,
and reverts the API to be a bit more compatible and flexible. This has
survived a full 'make universe'.
Approved by: re (bmah)
quite excessive, and caused the available space to be used up too
easily. The new limit should be a better estimation of how much the
caller will need at most.
- Double the IOTSB size 64kB, for a DVMA area size of 64MB.
This should fix DMA problems on e450s and other large machines due
to DVMA space exhaustion, which were introduced in my last IOMMU
code revision in January.
Reported and tested by: fenner
enum to an int and redefine the BUS_DMASYNC_* constants as
flags. This allows us to specify several operations in one
call to bus_dmamap_sync() as in NetBSD.
counterparts to bus_dmamem_alloc() and bus_dmamem_free(). This allows
the caller to specify the size of the allocation instead of it defaulting
to the max_size field of the busdma tag.
This is intended to aid in converting drivers to busdma. Lots of
hardware cannot understand scatter/gather lists, which forces the
driver to copy the i/o buffers to a single contiguous region
before sending it to the hardware. Without these new methods, this
would require a new busdma tag for each operation, or a complex
internal allocator/cache for each driver.
Allocations greater than PAGE_SIZE are rounded up to the next
PAGE_SIZE by contigmalloc(), so this is not suitable for multiple
static allocations that would be better served by a single
fixed-length subdivided allocation.
Reviewed by: jake (sparc64)
map. Use this new feature to implement iommu_dvmamap_load_mbuf() and
iommu_dvmamap_load_uio() functions in terms of a new helper function,
iommu_dvmamap_load_buffer(). Reimplement the iommu_dvmamap_load()
to use it, too.
This requires some changes to the map format; in addition to that,
remove unused or redundant members.
Add SBus and Psycho wrappers for the new functions, and make them
available through the respective DMA tags.
2.) pass the requesting child device (instead of the bus one) up when
handling interrupt resources
3.) remeber to mark the resource list entry as unused in
sbus_release_resource().
Reported by: scottl (3)
register to the one of the processor doing the interrupt setup. This
is required since this field is preinitialized to 0, but there exist
machines which have no processor with a MID of 0 (e.g. e450s with 1 or 2
processors).
Add some more macros for handle the interrupt mapping registers, and
rename some existing ones for consistency.
Approved by: re
of them, and couple them by always performing all operations on all
present IOMMUs. This is required because with the current API there
is no way to determine on which bus a busdma operation is performed.
While being there, clean up the iommu code a bit.
This should be a step in the direction of allow some of larger machines
to work; tests have shown that there still seem to be problems left.
- change the IOMMU support code so that it supports overcommittting the
available DVMA memory, while still allocating as lazily as possible.
This is achieved by limiting the preallocation, and deferring the
allocation to map load time when it fails. In the latter case, the
DVMA memory reserved for unloaded maps can be stolen to free up enough
memory for loading a map.
- allow NULL settings in the method tables, and search the parent tags
until an appropriate implementation is found. This allows to remove some
kluges in the old implementation.
