have implemented the PIM_NOSCAN rescan functionality will have it
enabled.
This is a no-op for head.
Reviewed by: slm
Sponsored by: Spectra Logic Corporation
MFC after: 3 days
TLR is necessary for reliable communication with SAS tape drives.
This was broken by change 246713 in the mps(4) driver. It changed the
cm_data field for SCSI I/O requests to point to the CCB instead of the data
buffer. So, instead, look at the CCB's data pointer to determine whether
or not we're talking to a tape drive.
Also, take the residual into account to make sure that we don't go off the
end of the request.
MFC after: 3 days
Sponsored by: Spectra Logic Corporation
Remove some other ifdefs that came in with a copy/paste that mean basically
"if this processor supports multicore stuff", because if you're starting up
an AP core... it does.
Since radix has been ignoring sa_family in passed sockaddrs,
no one ever has bothered filling valid sa_family in netmasks.
Additionally, radix adjusts sa_len field in every netmask not to
compare zero bytes at all.
This leads us to rt_mask with sa_family of AF_UNSPEC (-1) and
arbitrary sa_len field (0 for default route, for example).
However, rtsock have been passing that rt_mask intact for ages,
requiring all rtsock consumers to make ther own local hacks.
We even have unfixed on in base:
do `route -n monitor` in one window and issue `route -n get addr`
for some directly-connected address. You will probably see the following:
got message of size 304 on Thu May 8 15:06:06 2014
RTM_GET: Report Metrics: len 304, pid: 30493, seq 1, errno 0, flags:<UP,DONE,PINNED>
locks: inits:
sockaddrs: <DST,GATEWAY,NETMASK,IFP,IFA>
10.0.0.0 link#1 (255) ffff ffff ff em0:8.0.27.c5.29.d4 10.0.0.92
_________________^^^^^^^^^^^^^^^^^^
after the change:
got message of size 312 on Thu May 8 15:44:07 2014
RTM_GET: Report Metrics: len 312, pid: 2895, seq 1, errno 0, flags:<UP,DONE,PINNED>
locks: inits:
sockaddrs: <DST,GATEWAY,NETMASK,IFP,IFA>
10.0.0.0 link#1 255.255.255.0 em0:8.0.27.c5.29.d4 10.0.0.92
_________________^^^^^^^^^^^^^^^^^^
Sponsored by: Yandex LLC
MFC after: 1 month
cards. LSI has been maintaining this driver outside of the FreeBSD
tree. It overlaps support of ThunderBolt and Invader cards that mfi(4)
supports. By default mfi(4) will attach to cards. If the tunable:
hw.mfi.mrsas_enable=1
is set then mfi(4) will not probe and attach to these newer cards and
allow mrsas(4) to attach. So by default this driver will not effect
a FreeBSD system unless mfi(4) is removed from the kernel or the
tunable is enabled.
mrsas(4) attaches disks to the CAM layer so it depends on CAM and devices
show up as /dev/daX. mfiutil(8) does not work with mrsas. The FreeBSD
version of MegaCli and StorCli from LSI do work with mrsas. It appears
that StorCli only works with mrsas. MegaCli appears to work with mfi(4)
and mrsas(4).
It would be good to add mfiutil(4) support to mrsas, emulations modes,
kernel logging, device aliases to ease the transition between mfi(4)
and mrsas(4).
Style issues should be resolved by LSI when they get committers approved.
The plan is get this driver in FreeBSD 9.3 to improve HW support.
Thanks to LSI for developing, testing and working with FreeBSD to
make this driver co-exist in FreeBSD. This improves the overall
support of MegaRAID SAS.
Submitted by: Kashyap Desai <Kashyap.Desai@lsi.com>
Reviewed by: scottl
MFC after: 3 days
Sponsored by: LSI
allowed range or when one or more pages are not mapped. This according to
The Open Group Base Specifications Issue 7.
Discussed with: attilio, Bruce Evans
Reviewed by: alc, Garrett Cooper
Reported by: ATF
MFC after: 2 weeks
Sponsored by: EMC / Isilon storage division
mprsas_SSU_to_SATA_devices().
This fixes an assertion on shutdown with INVARIANTS enabled with SATA
drives present on an IR firmware controller.
Reviewed by: Steve McConnell <stephen.mcconnell@avagotech.com>.
MFC after: 3 days
a journal block even when there are no journal entries to be written.
Until the root cause is found, handle this case by ensuring that a
valid journal segment is always written.
Second, the data buffer used for writing journal entries was never
being scrubbed of old data. Fix this.
Submitted by: Takehara Mikihito
Obtained from: Netflix, Inc.
MFC after: 3 days
4730 metaslab group taskq should be destroyed in metaslab_group_destroy()
Reviewed by: Alex Reece <alex.reece@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Original author: George Wilson
MFC after: 3 days
case where the controller is already enabled.
Some of the pl310 configuration registers cannot be changed while the
controller is active, so if there is any platform-specific init to be done
it must happen before enabling the controller.
The controller should not be enabled upon entry to the kernel, but u-boot
has recently developed the bad habit of leaving caches enabled when
launching the kernel, and since we have no control over that source code
we have to do our best to cope with it. The PL310 manual doesn't document
a safe sequence for disabling the controller, but the sequence used here
(force write-through mode and disable linefill allocations, then clean and
invalidate the current contents before disabling the hardware) appears to
be sound both by analysis and empirical testing.
These changes were developed and tested in collaboration with
Svatopluk Kraus <onwahe@gmail.com>.
Reviewed by: cognet@
controller driver by piggybacking the SOF interrupt when issuing new
and checking old transfers. Number of interrupts was reduced by 30%
when doing Isochronous transfers.
Use correct GINTMSK_XXX macros when accessing the DWC OTG interrupt
mask register.
Add code to adjust the frame interval register which influences the
SOF rate.
MFC after: 2 weeks
This problem only occurs on versions of FreeBSD prior to the recent CAM
locking changes. (i.e. stable/9 and older versions of stable/10) This
change should be a no-op for head and stable/10.
If a path isn't specified, xpt_register_async() will create a fully
wildcarded path and acquire a lock (the XPT lock in older versions,
and via xpt_path_lock() in newer versions) to call xpt_action() for the
XPT_SASYNC_CB CCB. It will then drop the lock and if the requested event
includes AC_FOUND_DEVICE or AC_PATH_REGISTERED, it will get the caller up
to date with any device arrivals or path registrations.
The issue is that before the locking changes, each SIM lock would get
acquired in turn during the EDT tree traversal process. If a path is
specified for xpt_register_async(), it won't acquire and drop its own lock,
but instead expects the caller to hold its own SIM lock. That works for
the first part of xpt_register_async(), but causes a recursive lock
acquisition once the EDT traversal happens and it comes to the SIM in
question. And it isn't possible to call xpt_action() without holding a SIM
lock.
The locking changes fix this by using the XPT topology lock for EDT
traversal, so it is no longer an issue to hold the SIM lock while calling
xpt_register_async().
The solution for FreeBSD versions before the locking changes is to request
notification of all device arrivals (so we pass a NULL path into
xpt_register_async()) and then filter out the arrivals that are not ours.
MFC After: 3 days
Sponsored by: Spectra Logic Corporation
periodically update the reference status of the active pages. This function
was called, instead of vm_pageout_scan(), when memory was not scarce. The
objective was to provide up to date reference status for active pages in
case memory did become scarce and active pages needed to be deactivated.
The active page queue scan performed by vm_pageout_page_stats() was
virtually identical to that performed by vm_pageout_scan(), and so r254304
eliminated vm_pageout_page_stats(). Instead, vm_pageout_scan() is
called with the parameter "pass" set to zero. The intention was that when
pass is zero, vm_pageout_scan() would only scan the active queue. However,
the variable page_shortage can still be greater than zero when memory is not
scarce and vm_pageout_scan() is called with pass equal to zero.
Consequently, the inactive queue may be scanned and dirty pages laundered
even though that was not intended by r254304. This revision fixes that.
Reported by: avg
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
used.
It turns out that the RX DMA engine does the same last-descriptor-link-
pointer-re-reading trick that the TX DMA engine. That is, the hardware
re-reads the link pointer before it moves onto the next descriptor.
Thus we can't free a descriptor before we move on; it's possible the
hardware will need to re-read the link pointer before we overwrite
it with a new one.
Tested:
* AR5416, STA mode
TODO:
* more thorough AP and STA mode testing!
* test on other pre-AR9380 NICs, just to be sure.
* Break out the RX descriptor grabbing bits from the RX completion
bits, like what is done in the RX EDMA code, so ..
* .. the RX lock can be held during ath_rx_proc(), but not across
packet input.
same events that tcpstat's tcps_rcvmemdrop counter counts.
- Rename tcps_rcvmemdrop to tcps_rcvreassfull and improve its
description in netstat(1) output.
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
thicket of .if ${COMPILER_TYPE} == "clang" that controls
warnings. Also, use CFLAGS.clang in a couple places in preference to
having a similar construct that's related to the CWARNFLAGS changes.
o Declare vt(4) drivers dataset.
o Create single static structures for all early drivers.
o Add vt(4) to be by default in the kernel consoles list.
o Create one more sysinit point, to be able to initialize memory and lock
requirement of early drivers.
o Implement early drivers select. (Only best available will be selected).
o Fix one missed "return (0)" for VTYLOCK.
o Improve locking for cases when one driver replace another.
o Make driver replacement notification less debug-look-like.
Minor spell fixes.
Sponsored by: The FreeBSD Foundation
