amd64, and is a factor of 3 less than the value previously auto-sized on
a 12GB machine, which would cause an overflow in calculations involving the
maxbcache int, causing bufinit() to loop forever at boot.
Reviewed by: mlaier, peter
correspond to the commit log. It changed the maxswzone and maxbcache
parameters from int to long, without changing the extern definitions
in <sys/buf.h>.
In fact it's a good thing it did not, because other parts of the system
are not yet ready for this, and on large-memory sparc machines it causes
severe filesystem damage if you try.
The worst effect of the change was that the tunables controlling the
above variables stopped working. These were necessary to allow such
large sparc64 machines (with >12GB RAM) to boot, since sparc64 did not
set a hard-coded upper limit on these parameters and they ended
up overflowing an int, causing an infinite loop at boot in bufinit().
Reviewed by: mlaier
cards and teach the re(4) driver to attach to revision 3 cards.
Submitted by: Fredrik Lindberg fli+freebsd-current at shapeshifter dot se
MFC after: 2 weeks
Reviewed by: imp, mdodd
originally wrote it for 4.x and hasn't really had the time to fully update
it to 5.x and later. Also, the author doesn't use the hardware anymore as
well. If someone does need this driver they can always resurrect it from
the Attic.
Requested by: Frank Mayhar frank at exit dot com
the modified memory rather than using register operands that held a pointer
to the memory. The biggest effect is that we now correctly tell the
compiler that these functions change the memory that these functions
modify.
Reviewed by: cognet
expr and printf are not available during installworld, so
use /bin/sh arithmetic expansion instead of expr and simply
give up on vanity formatting. ;-)
do not support the GETINFO immediate command, unlike just about every other
variant of the hardware. Also document some magic values and fix some minor
nearby whitespace.
MFC After: 3 days
changes in MD code are trivial, before this change, trapsignal and
sendsig use discrete parameters, now they uses member fields of
ksiginfo_t structure. For sendsig, this change allows us to pass
POSIX realtime signal value to user code.
2. Remove cpu_thread_siginfo, it is no longer needed because we now always
generate ksiginfo_t data and feed it to libpthread.
3. Add p_sigqueue to proc structure to hold shared signals which were
blocked by all threads in the proc.
4. Add td_sigqueue to thread structure to hold all signals delivered to
thread.
5. i386 and amd64 now return POSIX standard si_code, other arches will
be fixed.
6. In this sigqueue implementation, pending signal set is kept as before,
an extra siginfo list holds additional siginfo_t data for signals.
kernel code uses psignal() still behavior as before, it won't be failed
even under memory pressure, only exception is when deleting a signal,
we should call sigqueue_delete to remove signal from sigqueue but
not SIGDELSET. Current there is no kernel code will deliver a signal
with additional data, so kernel should be as stable as before,
a ksiginfo can carry more information, for example, allow signal to
be delivered but throw away siginfo data if memory is not enough.
SIGKILL and SIGSTOP have fast path in sigqueue_add, because they can
not be caught or masked.
The sigqueue() syscall allows user code to queue a signal to target
process, if resource is unavailable, EAGAIN will be returned as
specification said.
Just before thread exits, signal queue memory will be freed by
sigqueue_flush.
Current, all signals are allowed to be queued, not only realtime signals.
Earlier patch reviewed by: jhb, deischen
Tested on: i386, amd64
<group> is a numeric user/group ID instead of a user/group name (as
explicitly intended to be allowed by both the manual page and the
implementation).
Before this fix, mdmfs(8) aborted:
| # mdmfs -s 32m -w 0:0 md /var/tmp/foo
| Assertion failed: (mip->mi_have_uid), function extract_ugid, file /usr/src/sbin/mdmfs/mdmfs.c, line 555.
| Abort trap (core dumped)
The "mi_have_[ug]id" fields were only set in case a name lookup was
successful. Instead they also have to be set in case the string to
integer conversion was successful.
Additionally, as a result of this fix, two assertions at the end of
the function are now always true and hence can be just be removed. It
is guarrantied that both the UID and the GID are set when the function
returns regularily, else it would have been already bailed out with
usage()/exit(3) or errx(3) before.
Spotted by: Christoph Schug <chris@schug.net>
MFC after: 3 days
The receive function em_process_receive_interrupts() unlocks the
adapter while ether_input() processes the packet, and then locks
it back. In the meantime, em_init() may be called, either from
em_watchdog() from softclock interrupt or from the ifconfig(8)
program. The em_init() resets the card, in particular it sets
adapter->next_rx_desc_to_check to 0 and resets hardware RX Head
and Tail descriptor pointers. The loop in
em_process_receive_interrupts() does not expect these things to
change, and a mess may result.
This fixes long wedges of em(4) interfaces receive part under high
load and IP fastforwarding enabled.
PR: kern/87418
Submitted by: Dmitrij Tejblum <tejblum yandex-team.ru>
that the following funtions are not used, wrap in '#ifdef noused' for the
moment.
bstp_enable_change_detection
bstp_disable_change_detection
bstp_set_bridge_priority
bstp_set_port_priority
bstp_set_path_cost
the ExCA spec, and close cousins:
o Write an activate routine that works.
o merge a couple of items from oldcard before they are lost
o write a deactivate routine
I suspect we're still a ways away from having this work, but maybe for
6.1/5.5?
- move the function pointer definitions to if_bridgevar.h
- move most of the logic to the new BRIDGE_INPUT and BRIDGE_OUTPUT macros
- remove unneeded functions from if_bridgevar.h and sort a little.
previous revision only restored the MP optimization.
Describe the optimization strategy for TLB invalidations in a comment.
Reviewed by: ups@
MFC after: 3 days
Use bridge_ifdetach() to notify the bridge that a member has been detached. The
bridge can then remove it from its interface list and not try to send out via a
dead pointer.
as a Novell NE-2000. This is necessary for unpatched qemu working
correctly. qemu claims to be a RTL8029, but doesn't implement the
RTL8029 specific registers at this time. I've created patches for
that, but there's no reason we can't use qemu's emulation w/o these
patches. This should make life easier for those folks that boot
FreeBSD via qemu.
ed_probe_generic8390 where we're calling it. It will be done as part
of ed_probe_Novel_generic after things are setup in a way that
ed_probe_generic8390 will grok.
o Fix operator precedence botch that causes a panic when setting the media
type for 10baseT connections.
o Save the type of device so that it prints with the rest of the probe.
# this should make it work with qemu again, but only if it has my patches
# to actually implement the RTL8029 specific registers.
- Use device_printf() and if_printf() and remove nge_unit.
- Use callout_init_mtx() and remove nge_tick_locked() as nge_tick() is now
always called with the driver lock held.
- Use M_ZERO to contigmalloc() when allocating nge_ldata. It was possible
for the random garbage to be used in certain cases otherwise.
- Cleanup attach error handling including no longer leaking nge_ldata.
- Add locking to the ifmedia callouts.
- Lock accesses to if_hwassist and if_capenable in nge_ioctl().
Submitted by: Yuriy N. Shkandybin jura at networks dot ru (1, 3, 4)
Tested by: Yuriy N. Shkandybin jura at networks dot ru
MFC after: 3 days
probed and attached, not on the first call to device_get_softc().
- Add a cross reference to DEVICE_PROBE regarding the caveats of using the
softc in a driver's probe routine.
- Fix a grammar bogon.
PR: docs/87176 (1)
Submitted by: Devon H. O'Dell dodell at offmyserver dot com (1)
MFC after: 3 days
microtime to bintime. However, one standaline .Nm wasn't changed, and as
a result, the manpage claimed that bintime was added in both 5.0 and 3.0.
Fix by listing microtime explicitly.
- Fix a grammar bogon.
PR: docs/87147 (1)
Submitted by: Matthew Luckie (1)
MFC after: 3 days
