- Virtualize interface cloner for gre(4). This fixes a panic when destroying
a vnet jail which has a gre(4) interface.
- Make net.link.gre.max_nesting vnet-local.
Fix for control endpoint handling in the DWC OTG driver. The data
stage processing is only allowed after the setup complete event has
been received. Else a race may occur and the OUT data can be corrupted.
While at it ensure resetting a FIFO has the required wait loop.
Merge 278459,278460,278461,278462 which define DTBDIR and other things
needed for install to work. Although the commit in head kinda fixed
install_as_user, it's unknown if that works in 10.x (it didn't the last
time I tried).
- Updated all files with 2015 Avago copyright, and updated LSI's copyright
dates.
- Changed all of the PCI device strings from LSI to Avago Technologies (LSI).
- Added a sysctl variable to control how StartStopUnit behavior works. User can
select to spin down disks based on if disk is SSD or HDD.
- Inquiry data is required to tell if a disk will support SSU at shutdown or
not. Due to the addition of mprssas_async, which gets Advanced Info but not
Inquiry data, the setting of supports_SSU was moved to the
mprsas_scsiio_complete function, which snoops for any Inquiry commands. And,
since disks are shutdown as a target and not a LUN, this process was
simplified by basing it on targets and not LUNs.
- Added a sysctl variable that sets the amount of time to retry after sending a
failed SATA ID command. This helps with some bad disks and large disks that
require a lot of time to spin up. Part of this change was to add a callout to
handle timeouts with the SATA ID command. The callout function is called
mprsas_ata_id_timeout(). (Fixes PR 191348)
- Changed the way resets work by allowing I/O to continue to devices that are
not currently under a reset condition. This uses devq's instead of simq's and
makes use of the MPSSAS_TARGET_INRESET flag. This change also adds a function
called mprsas_prepare_tm().
- Some changes were made to reduce code duplication when getting a SAS address
for a SATA disk.
- Fixed some formatting and whitespace.
- Bump version of mpr driver to 9.255.01.00-fbsd
PR: 191348
The NFS client wasn't handling getdirentries(2) requests for sizes
that are not an exact multiple of DIRBLKSIZ correctly. Fortunately
readdir(3) always uses an exact multiple of DIRBLKSIZ, so few applications
were affected. This patch fixes this problem by reducing the size
of the directory read to an exact multiple of DIRBLKSIZ.
Extend the maximum number of allowed PCM channels in a PCM stream to
127 and decrease the maximum number of sub-channels to 1. These
definitions are only used inside the kernel and can be changed later
if more than one sub-channel is desired. This has been done to allow
so-called USB audio rack modules to work with FreeBSD.
Add support for more than 8 audio channels per PCM stream for USB
audio class compliant devices under FreeBSD. Tested using 16 recording
and 16 playback audio channels simultaneously.
Bump the FreeBSD version to force recompiling all external modules.
It's common for multi-threaded processes to create a thread for
the purpose of synchronously processing signals. Allow such processes to
utilize a capabilities sandbox.
- Remove mac_get_fd/mac_set_fd - those are not syscalls. The
__mac_get_fd() and __mac_set_fd() syscalls are listed earlier.
- Correct typo in syscall name. It should be sched_rr_get_interval,
not sched_rr_getinterval.
In the reply to SADB_X_SPDGET message use the same sequence number that
was in the request. Some IKE deamons expect it will the same. Linux and
NetBSD also follow this behaviour.
PR: 137309
Remove THRMISC_VERSION. The thrmisc structure doesn't include a version
number, so this wasn't used (and can't easily be added). If at some point
we want to extend thrmisc, we will probably need to just add a new note
type and ensure that the new type includes a version number.
Move the 32-bit compatible procfs types from freebsd32.h to <sys/procfs.h>
and export them to userland.
- Define __HAVE_REG32 on platforms that define a reg32 structure and check
for this in <sys/procfs.h> to control when to export prstatus32, etc.
- Add prstatus32_t and prpsinfo32_t typedefs for the 32-bit structures.
libbfd looks for these types, and having them fixes 'gcore' in gdb of a
32-bit process on a 64-bit platform.
- Use the structure definitions from <sys/procfs.h> in gcore's elf32 core
dump code instead of duplicating the definitions.
Teach key_expire() send SADB_EXPIRE message with the SADB_EXT_LIFETIME_HARD
extension header type. The key_flush_sad() now will send SADB_EXPIRE
message when HARD lifetime expires. This is required by RFC 2367 and some
keying daemons rely on these messages. HARD lifetime messages have
precedence over SOFT lifetime messages, so now they will be checked first.
Also now SADB_EXPIRE messages will be send even the SA has not been used,
because keying daemons might want to rekey such SA.
PR: 200282, 200283
MFC r283102:
Change SA's state before sending SADB_EXPIRE message. This state will
be reported to keying daemon.
Remove route chaching support from ipsec code. It isn't used for some time.
* remove sa_route_union declaration and route_cache member from struct secashead;
* remove key_sa_routechange() call from ICMP and ICMPv6 code;
* simplify ip_ipsec_mtu();
* remove #include <net/route.h>;
Sponsored by: Yandex LLC
Read GEOM_UNCOMPRESS metadata using several requests that fit into
MAXPHYS. For large compressed images the metadata size can be bigger
than MAXPHYS and this triggers KASSERT in g_read_data().
Also use g_free() to free memory allocated by g_read_data().
PR: 199476
Fix two bugs that could result in PMC sampling effectively stopping.
In both cases, the the effect of the bug was that a very small positive
number was written to the counter. This means that a large number of
events needed to occur before the next sampling interrupt would trigger.
Even with very frequently occurring events like clock cycles wrapping all
the way around could take a long time. Both bugs occurred when updating
the saved reload count for an outgoing thread on a context switch.
First, the counter-independent code compares the current reload count
against the count set when the thread switched in and generates a delta
to apply to the saved count. If this delta causes the reload counter
to go negative, it would add a full reload interval to wrap it around to
a positive value. The fix is to add the full reload interval if the
resulting counter is zero.
Second, occasionally the raw counter value read during a context switch
has actually wrapped, but an interrupt has not yet triggered. In this
case the existing logic would return a very large reload count (e.g.
2^48 - 2 if the counter had overflowed by a count of 2). This was seen
both for fixed-function and programmable counters on an E5-2643.
Workaround this case by returning a reload count of zero.
PR: 198149
Sponsored by: Norse Corp, Inc.
- Move hwpmc(4) debugging code under a new HWPMC_DEBUG option instead of
the broader DEBUG option.
- Convert hwpmc(4) debug printfs over to KTR.
Sponsored by: Norse Corp, Inc.
r273480:
cxgbe/iw_cxgbe: wake up waiters after flushing the qp.
r273750:
Some cxgbe/iw_cxgbe fixes:
- Free rt in c4iw_connect only if it is allocated.
- Call soclose instead of so_shutdown if there is an abort from the peer.
- Close socket and return failure if TOE is not enabled.
r273753:
iwcm_event status needs to be populated for close_complete_upcall
r273797:
Always request a completion for every work request for iWARP. The
initial MPA exchange must be tracked this way so that t4_tom's state for
the tid is all clean at the time the tid transitions to RDMA mode. Once
it does, t4_tom is out of the way and iw_cxgbe uses the qp endpoints
directly.
r274461:
iw_cxgbe: don't forget to close the socket in c4iw_connect if soconnect
fails.
Properly update TX statistics for wlan(4).
ieee80211_pwrsave() can fail due to queue overflow, check its return code
and increment oerrors counter when it fails. Also handle more error cases
and update oerrors counter when we don't send mbuf due to some errors.
Return ENETDOWN when parent interface isn't ready. Update obytes and omcasts
counters in corresponding places.
PR: 184626
Differential Revision: https://reviews.freebsd.org/D2621
Add an ability accept encapsulated packets from different sources by one
gif(4) interface. Add new option "ignore_source" for gif(4) interface.
When it is enabled, gif's encapcheck function requires match only for
packet's destination address.
Differential Revision: https://reviews.freebsd.org/D2004
Sponsored by: Yandex LLC
Take source and destination address into account when determining
the scope.
This fixes a problem when a client with a global address
connects to a server with a private address.
Thanks to Irene Ruengeler in helping me to find the issue.
Fix a bug where messages would not be sent in SHUTDOWN_RECEIVED state.
This problem was reported by Mark Bonnekessel and Markus Boese.
Thanks to Irene Ruengeler for helping me to fix the cause of
the problem. It can be tested with the following packetdrill script:
+0.0 socket(..., SOCK_STREAM, IPPROTO_SCTP) = 3
+0.0 fcntl(3, F_GETFL) = 0x2 (flags O_RDWR)
+0.0 fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0
// Check the handshake with an empty(!) cookie
+0.1 connect(3, ..., ...) = -1 EINPROGRESS (Operation now in progress)
+0.0 > sctp: INIT[flgs=0, tag=1, a_rwnd=..., os=..., is=..., tsn=0, ...]
+0.1 < sctp: INIT_ACK[flgs=0, tag=2, a_rwnd=10000, os=1, is=1, tsn=0, STATE_COOKIE[len=4, val=...]]
+0.0 > sctp: COOKIE_ECHO[flgs=0, len=4, val=...]
+0.1 < sctp: COOKIE_ACK[flgs=0]
+0.0 getsockopt(3, SOL_SOCKET, SO_ERROR, [0], [4]) = 0
+0.0 write(3, ..., 1024) = 1024
+0.0 > sctp: DATA[flgs=BE, len=1040, tsn=0, sid=0, ssn=0, ppid=0]
+0.0 write(3, ..., 1024) = 1024 // Pending due to Nagle
+0.0 < sctp: SHUTDOWN[flgs=0, cum_tsn=0]
+0.0 > sctp: DATA[flgs=BE, len=1040, tsn=1, sid=0, ssn=1, ppid=0]
+0.0 < sctp: SACK[flgs=0, cum_tsn=1, a_rwnd=10000, gaps=[], dups=[]] // Do we need another SHUTDOWN here?
+0.0 > sctp: SHUTDOWN_ACK[flgs=0]
+0.0 < sctp: SHUTDOWN_COMPLETE[flgs=0]
+0.0 close(3) = 0
Ensure that the COOKIE-ACK can be sent over UDP if the COOKIE-ECHO was
received over UDP.
Thanks to Felix Weinrank for makeing me aware of the problem and to
Irene Ruengeler for providing the fix.
