It seems that if range within one page is given this page will not be
invalidated at all. Clean it up.
Submitted by: Dominik Ermel <der@semihalf.com>
Obtained from: Semihalf
Sponsored by: Cavium
Reviewed by: wma, zbb
Approved by: cognet (mentor)
Differential Revision: https://reviews.freebsd.org/D5569
This commit provides attachment of xhci-platform for A38X boards, making
it possible to mount FreeBSD world from USB3.0 flash. 'xhci' device was
added to files.mv (as optional) and kernconf of Armada38x was enhanced.
It was also necessary to open programmable memory windows of USB3.0.
fdt_win_setup needed improvement so it's able to traverse through
children of internal-regs node.
Submitted by: Bartosz Szczepanek <bsz@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Reviewed by: hselasky
Approved by: cognet (mentor)
Differential Revision: https://reviews.freebsd.org/D5031
After ARM_INTRNG introduction, MPIC code needed several modifications:
- IRQ resource and its handler added
- several DEVMETHODs of INTRNG interface implemented
- defines enhanced to ensure code compiles as well for AXP as for A38X
- added dummy MSI_IRQ, ERR_IRQ defines for Armada38x
- MPIC driver was added to files.armada38x, ARM_INTRNG option enabled in
kernconf file and regs of MPIC corrected in dts file.
Instead of modifying Armada38X DTS, offsets to CPU registers defined in
driver were changed. That required restoring 'reg' property of mpic node
in ArmadaXP to state compliant with Linux DTS.
Additionally, required ARM_INTRNG definitions were added to mv_common.c.
Submitted by: Bartosz Szczepanek <bsz@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Reviewed by: adrian, andrew, ian, skra
Approved by: cognet (mentor)
Differential Revision: https://reviews.freebsd.org/D5030
This displays the IE names in ifconfig but it doesn't yet decode things.
Submitted by: Idwer Vollering <vidwer@gmail.com>
Differential Revision: https://reviews.freebsd.org/D3782
strlens is somewhat suboptimal, but it's a temporary measure that will
be replaced with red-black trees later on.
PR: 204417
Reviewed by: kib@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5266
In timer2sbintime(), calculate the second and fractional second portions of
the sbintime separately. When calculating the the fractional second portion,
use a 64bit multiply to prevent excess truncation. This avoids the ~7% error
in the original conversion for ns, and smaller errors of the same type for us
and ms.
PR: 198139
Reviewed by: jhb
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D5397
The base system libc is only used to run binaries built on FreeBSD 7.0 and
later. It does not need to include system call wrappers for system calls
only used by FreeBSD binaries built on versions older than 7.0. This was
already true for "COMPAT" system calls, but now wrappers for system calls
used on FreeBSD 4 and 6 are excluded as well.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D5597
Both objdump and nm are equally capable of reporting undefined symbols.
This gets us a step closer to building without binutils as we have an nm
implementation from ELF Tool Chain.
Reviewed by: bdrewery
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5613
This makes sure the default context of each ring is cleaned up with the
ring itself and fixes a memory leak.
Author: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Date: Fri May 3 16:29:08 2013 +0300
drm/i915: unreference default context on module unload
Before module unload is called, gpu_idle() will switch
to default context. This will increment ref count of base
object as the default context is 'running' on module unload
time. Unreference the drm object so that when context
is freed, base object is freed as well.
v2: added comment to explain the refcounts (Ben Widawsky)
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Obtained from: Linux
defined:
sys/dev/cxgbe/t4_main.c:7474: warning: 'sysctl_tp_tick' defined but not used
sys/dev/cxgbe/t4_main.c:7505: warning: 'sysctl_tp_dack_timer' defined but not used
sys/dev/cxgbe/t4_main.c:7519: warning: 'sysctl_tp_timer' defined but not used
This just adds a bunch of #ifdef TCP_OFFLOAD in the right places.
Reviewed by: np
Differential Revision: https://reviews.freebsd.org/D5620
This fixes several memory leaks. Apparently, this problem exists in
Linux 3.8 but the code changed in Linux 3.9 so it may be fixed upstream
already. Still, this is something we need to pay attention to.
... when __wait_seqno() is interrupted by a signal. In this case,
__wait_seqno() returns -ERESTARTSYS. Like we already do in drm_ioctl(),
we need to convert this error to a common code such as -EINTR, so the
page fault handler is restarted.
Reported by: Frederic Chardon <chardon.frederic@gmail.com>
Tested by: Frederic Chardon <chardon.frederic@gmail.com>
The i915 video driver doesn't depend on agp(4) anymore for Sandybridge
and later GPUs. Therefore, there is no need to attach agp(4) to those
devices.
While here, fix `agp_i965_res_spec` to include the aperture base for
GEN4 and GEN5.
Reviewed by: kib
Approved by: kib
Differential Revision: https://reviews.freebsd.org/D5586
192.168.1.1, with share "share". This commit fixes a problem
where "mkdir /net/192.168.1.1/share/meh" would return spurious
error instead of creating the directory if the target filesystem
wasn't mounted yet; subsequent attempts would work correctly.
The failure scenario is kind of complicated to explain, but it all
boils down to calling VOP_MKDIR() for the target filesystem (NFS)
with wrong dvp - the autofs vnode instead of the filesystem root
mounted over it.
Reviewed by: kib@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5442
This fixes the following error:
kernel: error: [drm:pid1167:drm_release] *ERROR* Device busy: 2
Because of that, drm_lastclose() was not called, leading to a few memory
leaks once the driver was unloaded.
MFC after: 1 week
pfs_visible(). The recursion does not cause deadlock because the sx
implementation does not prefer exclusive waiters over the shared, but
this is an implementation detail.
Reported by: pho, Matthew Bryan <matthew.bryan@isilon.com>
Reviewed by: jhb
Tested by: pho
Approved by: des (pseudofs maintainer)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
The inclusion of .MAKE.DEPENDFILE (.depend) has special logic in make
to ignore stale/missing dependencies. bmake 20160220 added a '.dinclude'
directive that uses the special logic for .depend when including the file.
This fixes a build error when a file is moved or deleted that exists in a
.depend.OBJ file. This happened in r292782 when sha512c.c "moved" and an
incremental build of lib/libmd would fail with:
make: don't know how to make /usr/src/lib/libcrypt/../libmd/sha512c.c. Stop
Now this will just be seen as a stale dependency and cause a rebuild:
make: /usr/obj/usr/src/lib/libmd/.depend.sha512c.o, 13: ignoring stale .depend for /usr/src/lib/libcrypt/../libmd/sha512c.c
--- sha512c.o ---
...
This rebuild will only be done once since the .depend.sha512c.o will
be updated on the build with the -MF flags.
This also removes -MP being passed for the .depend.OBJ generation (which
would create fake targets for system headers) since the logic is no
longer needed to protect from missing files.
Sponsored by: EMC / Isilon Storage Division
- Query the location of the log very early during attach. Refresh the
location later after establishing contact with the firmware.
- Save the log's location as a flat address in devlog_params.
- Use a memory window instead of backdoor access to the EDC/MC to read
the log.
