115 Commits

Author SHA1 Message Date
peter
2ed5055d26 SIG_SETMASK is 3, not 1. Sigh. 2003-05-08 07:41:24 +00:00
peter
be706ebe0c Fix an embarresing transcription error from i386 to amd64. Put the arguments
to sigprocmask(2) int the correct order. *blush*.
For sigsetjmp(), match up the pushq/popq in the non-savemask case.
2003-05-08 06:25:03 +00:00
peter
223b5925cf Tidy up modf.S and make it actually work. It wasn't extracting
the value out of ST(0) before copying it to %xmm0.  Also remove bogus stack
frame and work in the red zone.
2003-05-08 03:19:37 +00:00
peter
c0c9e85781 Fix typo, even though this is unused. 2003-05-08 00:02:47 +00:00
peter
b4ea6939e7 Like ia64, amd64 has got a 16 byte sized and aligned 'long double'.
Obtained from:	re (blanket amd64)
2003-05-08 00:02:03 +00:00
peter
8527540b90 Turn off alloca.S - it cannot possibly work like this since on AMD64, gcc
doesn't use stack frames.  It uses offsets relative to %rsp, not %rbp.  So
we cannot just change %rsp like this.

Approved by:	re (blanket amd64)
2003-05-07 23:49:24 +00:00
peter
43041fec8c Actually use the correct values for AMD64. It is a 64 bit platform,
configure gdtoa as such.
2003-05-07 23:48:05 +00:00
obrien
f98a708c20 Convert the i386 alloca(3) to the x86-64 ISA.
Alignment hack from:	NetBSD
2003-05-01 16:04:38 +00:00
peter
08afc1caa9 Delete i386_* syscall wrappers and manpages. Rename Ovfork.S to vfork.S. 2003-04-30 18:17:07 +00:00
peter
415054f8cb Update for AMD64 after repocopy from i386/sys/*. This means:
- strip out the nasty PIC_PROLOGUE/EPILOGUE stuff, since we dont have
to lose a register in PIC mode anymore (we use %rip-relative addressing).
- update for C register argument passing conventions.
- convert 32 bit to 64 bit register sizes etc.
2003-04-30 18:16:33 +00:00
peter
d25ffe9c8c I have no idea why the reboot(2) syscall wrapper ends with iret, but
update it to be iretq for completeness.
2003-04-30 18:14:44 +00:00
peter
2c555e9f24 Update for AMD64. Depend on %rdi (first syscall argument) being preserved
across a "syscall"-style syscall
2003-04-30 18:13:48 +00:00
peter
44164f8178 Update for AMD64 (repocopied from i386/sys/Ovfork.S - why is it O?)
Depend on %rsi being preserved across the "syscall"-style syscall and strip
out the PIC stuff (this cpu has full PC-relative addressing, at last!)
2003-04-30 18:13:13 +00:00
peter
0b2f0dc371 Update for AMD64 contexts. Note that this still has some x87-style FPU
instructions here, these may need to be updated for SSE.
(Repocopied from i386/gen)
2003-04-30 18:09:33 +00:00
peter
9e23a6c68f Reduce the SRCS to what compiles 2003-04-30 18:08:01 +00:00
peter
5219e46960 Update for AMD64 (repocopied from i386/net). We can depend on having
the bswap instruction (yay!).  Update for register parameter passing
instead of i386 style stack based param passing.
2003-04-30 18:07:23 +00:00
peter
6ca367c854 Update for AMD64-style syscalls. Repocopied from i386/SYS.h.
Note that the syscall instruction clobbers %rcx, which is inconvenient
because it is the fourth syscall argument, so we use %r10 (another scratch
register) for the 4th syscall arg instead (I picked %r10 to be the same as
NetBSD).  int 0x80 is still possible though, and it uses %rcx as usual.
Note that the syscall style syscall does *NOT* preserve all the registers,
unlike int 0x80.  We do not preserve the scratch registers except for
%rdi and %rsi.  int 0x80 does preserve everything but the return values.
2003-04-30 18:06:14 +00:00
obrien
76d866f25c Floating point libc functions traditionally written in ASM.
AMD64 does away with the x87 in 64-bit long mode, so we have to play the
SSE/SSE2 game now.

Obtained from:	NetBSD/x86-64
2003-04-30 16:21:03 +00:00
das
2d9148b622 Add __ldtoa(), a wrapper around gdtoa() to make it look like dtoa().
In support of this, add some MD macros to assist in converting long
doubles to the format expected by gdtoa().

Reviewed by:	silence on standards@
2003-04-05 22:10:13 +00:00
das
d02cfc3692 Replace our ancient dtoa/strtod implementation with the gdtoa
package, a more recent, generalized set of routines.  Among the
changes:
- Declare strtof() and strtold() in stdlib.h.
- Add glue to libc to support these routines for all kinds
  of ``long double''.
- Update printf() to reflect the fact that dtoa works slightly
  differently now.

As soon as I see that nothing has blown up, I will kill
src/lib/libc/stdlib/strtod.c.  Soon printf() will be able
to use the new routines to output long doubles without loss
of precision, but numerous bugs in the existing code must
be addressed first.

Reviewed by:	bde (briefly), mike (mentor), obrien
2003-03-12 20:30:00 +00:00
mike
1998abeb23 o Implement C99 classification macros isfinite(), isinf(), isnan(),
isnormal().  The current isinf() and isnan() are perserved for
  binary compatibility with 5.0, but new programs will use the macros.
o Implement C99 comparison macros isgreater(), isgreaterequal(),
  isless(), islessequal(), islessgreater(), isunordered().

Submitted by:	David Schultz <dschultz@uclink.Berkeley.EDU>
2003-02-12 20:03:41 +00:00
mike
b4e3f2f94a Implement fpclassify():
o Add a MD header private to libc called _fpmath.h; this header
  contains bitfield layouts of MD floating-point types.
o Add a MI header private to libc called fpmath.h; this header
  contains bitfield layouts of MI floating-point types.
o Add private libc variables to lib/libc/$arch/gen/infinity.c for
  storing NaN values.
o Add __double_t and __float_t to <machine/_types.h>, and provide
  double_t and float_t typedefs in <math.h>.
o Add some C99 manifest constants (FP_ILOGB0, FP_ILOGBNAN, HUGE_VALF,
  HUGE_VALL, INFINITY, NAN, and return values for fpclassify()) to
  <math.h> and others (FLT_EVAL_METHOD, DECIMAL_DIG) to <float.h> via
  <machine/float.h>.
o Add C99 macro fpclassify() which calls __fpclassify{d,f,l}() based
  on the size of its argument.  __fpclassifyl() is never called on
  alpha because (sizeof(long double) == sizeof(double)), which is good
  since __fpclassifyl() can't deal with such a small `long double'.

This was developed by David Schultz and myself with input from bde and
fenner.

PR:		23103
Submitted by:	David Schultz <dschultz@uclink.Berkeley.EDU>
		(significant portions)
Reviewed by:	bde, fenner (earlier versions)
2003-02-08 20:37:55 +00:00
ru
40e2359f4b libc_r wasn't so tied to libc for 22 months. 2002-11-18 09:50:57 +00:00
deischen
4cf0594a9e Disconnect the userland get/set/swapcontext() functions from
libc.  I want to keep these in some version for the thread
library/ies, but don't know whether to have them repo-copied
to libc_r or renamed and kept in libc.

Change the name of an alpha macro that was changed with the
system call commit.
2002-11-16 06:39:11 +00:00
archie
d93f84495b Re-apply the previously backed-out commit that fixes the problem where
HUGE_VAL is not properly aligned on some architectures. The previous
fix now works because the two versions of 'math.h' (include/math.h
and lib/msun/src/math.h) have since been merged into one.

PR:	bin/43544
2002-10-31 23:05:20 +00:00
archie
207fb06f80 Revert previous commit to unbreak world until we figure out the
right way to do it.
2002-09-20 15:43:26 +00:00
archie
59b24d359e Fix a problem with the definition of HUGE_VAL causing the gcc warning
"cast increases required alignment of target type" on some platforms.

Reviewed by:	bde
2002-09-19 19:47:27 +00:00
bde
4e1f277a4f Fixed editing error in previous commit (*blush*). 2002-09-17 19:43:53 +00:00
bde
e6b86f5f97 Fixed unsorting of SRCS. 2002-09-17 14:33:23 +00:00
peter
a51c9b6627 Initiate deorbit burn for the i386-only a.out related support. Moves are
under way to move the remnants of the a.out toolchain to ports.  As the
comment in src/Makefile said, this stuff is deprecated and one should not
expect this to remain beyond 4.0-REL.  It has already lasted WAY beyond
that.

Notable exceptions:
gcc - I have not touched the a.out generation stuff there.
ldd/ldconfig - still have some code to interface with a.out rtld.
old as/ld/etc - I have not removed these yet, pending their move to ports.
some includes - necessary for ldd/ldconfig for now.

Tested on: i386 (extensively), alpha
2002-09-17 01:49:00 +00:00
mini
94a57caeb2 Save and restore FPU state properly in ucontext_t's.
Reviewed by:	deischen, julian
Approved by:	-arch
2002-09-16 19:24:31 +00:00
kan
c1490b1966 Use '_end' symbol instead of 'end' to initialize minbrk and curbrk
variables. Both symbols are set to the same value by the linker,
and _end symbol has less chances to clash with application defined
global symbols.

alpha, ia64 and sparc64 ports already use _end, i386 is now
consistent with them.

Reviewed by:	bde
Approved by:	obrien
Reported by:	pirzyk
2002-08-08 17:28:07 +00:00
jake
d6dcf86c81 Generate the normal asm stubs for all sysv system calls. Use these instead
of C wrappers for the *sys indirect system calls.  The indirect system calls
are horribly broken on sparc64.

Submitted by:	tmm
2002-05-23 23:51:57 +00:00
obrien
2fdb91d36d Restore CSRG ID's lost in January 1995. 2002-03-23 02:10:28 +00:00
obrien
b1189e8930 Fix the style of the SCM ID's.
I believe have made all of libc .h's as consistent as possible.
2002-03-22 23:42:05 +00:00
obrien
d90536e35b Fix the style of the SCM ID's.
I believe have made all of libc .c's as consistent as possible.
2002-03-22 21:53:29 +00:00
peter
e0773a724e Move swapcontext.c to the ${MACHINE_ARCH}/gen/Makefile.inc area, otherwise
it causes undefined references to getcontext() and setcontext() on
platforms other than i386 and alpha.
2002-03-21 06:45:32 +00:00
mike
bcee06d42c o Move NTOHL() and associated macros into <sys/param.h>. These are
deprecated in favor of the POSIX-defined lowercase variants.
o Change all occurrences of NTOHL() and associated marcros in the
  source tree to use the lowercase function variants.
o Add missing license bits to sparc64's <machine/endian.h>.
  Approved by: jake
o Clean up <machine/endian.h> files.
o Remove unused __uint16_swap_uint32() from i386's <machine/endian.h>.
o Remove prototypes for non-existent bswapXX() functions.
o Include <machine/endian.h> in <arpa/inet.h> to define the
  POSIX-required ntohl() family of functions.
o Do similar things to expose the ntohl() family in libstand, <netinet/in.h>,
  and <sys/param.h>.
o Prepend underscores to the ntohl() family to help deal with
  complexities associated with having MD (asm and inline) versions, and
  having to prevent exposure of these functions in other headers that
  happen to make use of endian-specific defines.
o Create weak aliases to the canonical function name to help deal with
  third-party software forgetting to include an appropriate header.
o Remove some now unneeded pollution from <sys/types.h>.
o Add missing <arpa/inet.h> includes in userland.

Tested on:	alpha, i386
Reviewed by:	bde, jake, tmm
2002-02-18 20:35:27 +00:00
bde
dc0928a2d4 Fixed unsorting and splitting of SRCS in previous commit. 2002-01-11 17:10:35 +00:00
deischen
e1f74be694 Add getcontext, setcontext, makecontext, and swapcontext. These
functions are defined in SUSv2 and the latest POSIX spec.

Thanks to Bernd Walter <ticso@cicely8.cicely.de> for helping debug my
alpha assembly.

Approved by:	-arch
2002-01-10 02:40:59 +00:00
jhb
1dc519633c Use 'mov' instead of 'lea' for setting the syscall number in %eax as that
is clearer about what we are actually doing.

Requested by:	bde
2001-11-27 20:51:26 +00:00
jhb
28f45ce3d0 Cleanups after previous change:
- Renumber labels since the previous revision removed one.
- Remove useless and wrong comment.
  - Repeating the function name is just redundant.
  - The previous revision made the comment about %edx useless.
  - The comment about %eax was wrong (but did explain why %eax used to be
    fixed up).

Submitted by:	bde
2001-11-13 16:58:43 +00:00
jhb
a2b7af5b3c The kernel already fixes up %eax for parents that return from fork, so
don't bother manually fixing up %eax for the parent process by testing
the value in %edx and zeroing and already zeroed %eax.
2001-11-13 06:36:43 +00:00
peter
314a1d3362 De-orbit DEFS.h - the other arches do not use it, and it got replaced
with <machine/asm.h>.

Reviewed by:	bde
2001-10-24 20:29:14 +00:00
ru
77fafc4065 Just use RSYSCALL. 2001-10-19 13:32:24 +00:00
ru
95ce4d2cdc Removed duplicate VCS ID tags, as per style(9). 2001-08-13 14:06:34 +00:00
ru
25ef23ac1c MAN[1-9] -> MAN. 2001-03-27 17:27:19 +00:00
deischen
ca55abf319 Clean up syscall generation in libc by removing HIDDEN_SYSCALLS
and treating (almost) all system calls the same way:

	__sys_foo - actual syscall
	foo, _foo - weak definitions to __sys_foo

Change PSEUDO syscalls (currently only _exit and _getlogin) to
be __sys_foo (T) and _foo (W).

Add $FreeBSD$ to a few files to satisfy commitprep.

Suggested by:	bde
2001-01-29 03:23:46 +00:00
deischen
56363d25db Comment only change; s/_thread_sys_/__sys_/ 2001-01-26 02:41:07 +00:00
deischen
1635c221b7 Remove _THREAD_SAFE and make libc thread-safe by default by
adding (weak definitions to) stubs for some of the pthread
functions.  If the threads library is linked in, the real
pthread functions will pulled in.

Use the following convention for system calls wrapped by the
threads library:
	__sys_foo - actual system call
	_foo - weak definition to __sys_foo
	foo - weak definition to __sys_foo

Change all libc uses of system calls wrapped by the threads
library from foo to _foo.  In order to define the prototypes
for _foo(), we introduce namespace.h and un-namespace.h
(suggested by bde).  All files that need to reference these
system calls, should include namespace.h before any standard
includes, then include un-namespace.h after the standard
includes and before any local includes.  <db.h> is an exception
and shouldn't be included in between namespace.h and
un-namespace.h  namespace.h will define foo to _foo, and
un-namespace.h will undefine foo.

Try to eliminate some of the recursive calls to MT-safe
functions in libc/stdio in preparation for adding a mutex
to FILE.  We have recursive mutexes, but would like to avoid
using them if possible.

Remove uneeded includes of <errno.h> from a few files.

Add $FreeBSD$ to a few files in order to pass commitprep.

Approved by:	-arch
2001-01-24 13:01:12 +00:00