Commit Graph

4139 Commits

Author SHA1 Message Date
Dag-Erling Smørgrav
cd3ee173f9 Switch from BIND 8 to BIND 9.
Submitted by:	(in part) dougb@, trhodes@
Reviewed by:	dougb@, trhodes@, re@
MFC after:	5 days
2004-09-21 19:01:48 +00:00
Dag-Erling Smørgrav
5a70daa23f If $dumpdev is set to AUTO, use the first suitable swap partition listed
in /etc/fstab, or print an error message if no suitable device was found.

MFC after:	4 weeks
2004-09-20 17:48:45 +00:00
Pawel Jakub Dawidek
9468063a70 Teach swap1 script how to remove added swap devices on system shutdown.
Without this change, if one had a swap-on-mirror configuration, gmirror
will rebuild mirror component(s) on boot, because they are dirty (they
were open on shutdown).
2004-09-17 17:58:19 +00:00
Gleb Smirnoff
27ca43f3cb Change tabs to whitespaces.
Noticed by:	ru
Pointy hat to:	glebius
2004-09-16 21:33:56 +00:00
Gleb Smirnoff
fdbe44b0cd Install netflow includes.
Approved by:	julian (mentor)
2004-09-16 20:42:03 +00:00
Giorgos Keramidas
a73af104ef We don't have any providers of `beforenetlkm' in FreeBSD. Remove the
dependency to it from our rc.d scripts.

Approved by:	mtm
2004-09-16 17:04:20 +00:00
Giorgos Keramidas
a71fcfed55 Fix requirement of network' to NETWORK' because the former isn't
provided by any rc.d script.

Approved by:	mtm
2004-09-16 17:03:12 +00:00
Sean Chittenden
6e03664cc4 Bring back etc/rc.d/ntpdate as requested by scads of people. This isn't a
complete backout as the ntpd_sync_on_start etc/rc.conf tunable is still
present, though the default is now NO (was YES).  Since we're no longer
syncing time at startup by default when ntpd is enabled (as was the case
24hrs ago), remove UPDATING entry pointing out that ntpd(1) -g is slower
than ntpdate(1).

Hopefully ntpd_sync_on_start="YES" can be made the default for -CURRENT
after 5.3 is cut.  At the very least, this should be set to YES when a
user requests to have ntpd enabled via sysinstall(1).

Requested by:	many
2004-09-15 01:08:33 +00:00
Sean Chittenden
756b0fff51 Stop using ntpdate(1) in our startup procedure. Replace ntpdate(1) with
calls to ntpd -g.  ntpd is noticeably slower than ntpdate, but is also more
accurate.  This removes the nasty hackery in rc.d/ntpdate that would parse
out ntp servers from /etc/ntp.conf (ntpd knows how to read its own config
file).  By default, ntpd *will* sync with its listed time servers.  To
turn this off so that ntpd does not sync, ntpd_sync_on_start="NO" can be
added to /etc/rc.conf.  If ntpd is not enabled (the default), then time is
not synced on startup.  ntpdate has been depreciated by the ntpd authors
for quite some time so this change shouldn't be unexpected.

Suggested by:	des
Approved by:	roberto (resident ntp guru)
2004-09-14 03:04:50 +00:00
Sean Chittenden
0050f9ec3c Stop using ntpdate(1) in our startup proceedure. Replace ntpdate(1) with
calls to ntpd -g.  ntpd is noticably slower than ntpdate, but is also more
accurate.  This removes the nasty hackery in rc.d/ntpdate that would parse
out ntp servers from /etc/ntp.conf (ntpd knows how to read its own config
file).  By default, ntpd *will* sync with its listed time servers.  To
turn this off so that ntpd does not sync, ntpd_sync_on_start="NO" can be
added to /etc/rc.conf.  If ntpd is not enabled (the default), then time is
not synced on startup.  ntpdate's use has been depreciated by the ntpd
authors for quite some time so this change shouldn't be unexpected.

Suggested by:	des
Approved by:	roberto (resident ntp guru)
2004-09-14 03:01:38 +00:00
Max Laier
9d7ccc0ffa Bring in some examples (and create space for future work here):
- Add OpenBSD example rulesets as advertised in etc/pf.conf and pf.conf(5)
- Tweak the pointer to fit the FreeBSD default location share/examples/pf
- Account for the new directory in BSD.usr.dist (no hier(7) change required
  as share/examples is an opaque item there).

Obtained from:	OpenBSD
Reminded by:	Thomas T. Veldhouse
PR:		docs/71691
MFC after:	2 days
2004-09-14 01:07:19 +00:00
Max Laier
27bc4862bd Update the passive OS fingerprint database from OpenBSD.
Obtained from:	lcamtuf.coredump.cx (via OpenBSD)
2004-09-14 00:30:14 +00:00
Ruslan Ermilov
e114c8953a A power failure left the temporary /var/.diskless directory
on my system, and since then my /var was always created as
MFS which was very surprising.  Fix this for /tmp and /var.
2004-09-13 17:40:14 +00:00
Bill Paul
a07bd003bf Add device driver support for the VIA Networking Technologies
VT6122 gigabit ethernet chip and integrated 10/100/1000 copper PHY.
The vge driver has been added to GENERIC for i386, pc98 and amd64,
but not to sparc or ia64 since I don't have the ability to test
it there. The vge(4) driver supports VLANs, checksum offload and
jumbo frames.

Also added the lge(4) and nge(4) drivers to GENERIC for i386 and
pc98 since I was in the neighborhood. There's no reason to leave them
out anymore.
2004-09-10 20:57:46 +00:00
David E. O'Brien
28b81da2d8 Restore NetBSD SCM ID.
Submitted by:	delphij@beastie.frontfree.net
2004-09-09 16:41:55 +00:00
Gleb Smirnoff
b52b98d627 Add axe(4) to ethernet-nic-regex.
PR:		conf/71410
Submitted by:	Andrew Thompson <thompsa AT thingy.tbd.co.nz>
Approved by:	julian (mentor)
MFC after:	3 days
2004-09-06 20:09:00 +00:00
Alfred Perlstein
0793d4d1e4 Hook autofs to the build. 2004-09-02 20:44:56 +00:00
Brooks Davis
e3a9804180 When an USB keyboard is plugged in to a machine with a builtin keyboard,
cause the USB keyboard to take over from the builtin one.  This means my
laptop just works when I'm using it as a desktop.

Reviewed by:	imp
2004-09-01 00:08:15 +00:00
Max Laier
9b56caaef4 Don't rely on properly setup linker.hints to figure out that pflog is now
part of the pf module.
While here fix a comment that was c'n'ped from rc.d/pf

PR:		bin/71096 (partly)
Submitted by:	Ville-Pertti Keinonen
MFC after:	2 days
2004-08-31 14:23:51 +00:00
Ken Smith
11980247d9 Protect the command flags set in the rc.conf files in case they're
more than one word, adding some quotes.

Advice from:	mtm (my first attempt wasn't quite right)
Reviewed by:	mtm
MFC after:	3 days
2004-08-29 15:02:43 +00:00
Tim J. Robbins
1bbc832cce Add Basque (Spain) locales: eu_ES.ISO8859-1, eu_ES.ISO8859-15, eu_ES.UTF-8.
(This differs somewhat from the version originally submitted - any mistakes
are my own.)

PR:		68524
Submitted by:	J. Vicente Carrasco -Bixen-
2004-08-28 12:52:31 +00:00
Yaroslav Tykhiy
cd9d7d4d0c Avoid double appearing of cloned interfaces in the output
from list_net_interfaces() when network_interfaces=auto.

Rationale: Since the auto case is special, the lesser evil
had to be chosen among not adding cloned interfaces to
_tmplist or removing duplicates from _tmplist after adding
cloned interfaces.  Since list_net_interfaces() must not use
/usr/bin tools, the former "evil" appeared clearer and much
more efficient.  (See the PR audit trail for discussion.)

PR:		conf/63700
Reviewed by:	brooks
MFC after:	5 days
2004-08-28 07:58:02 +00:00
Yaroslav Tykhiy
044d85099a Fix a typo in a variable name. 2004-08-27 12:11:47 +00:00
Ruslan Ermilov
05731cd2e1 share/examples/worm is dead. 2004-08-24 19:03:55 +00:00
Dag-Erling Smørgrav
da5d8b9395 Always quote variables in tests, to ensure correct evaluation even when
they are empty or undefined.

MFC after:	3 days
2004-08-19 08:55:24 +00:00
Thomas Quinot
8f6270dbb4 Skip entries for GBDE swap devices if they are commented out in /etc/fstab.
Reviewed by:	des
2004-08-18 21:54:40 +00:00
Jacques Vidrine
fc94eecc8f Create temporary files safely.
Submitted by:	Jon Passki <cykyc@yahoo.com>
2004-08-16 16:37:06 +00:00
Colin Percival
a05f27bb53 Add 3653/tcp and 3653/udp, since they were specifically requested.
PR:		conf/63907
Submitted by:	Marc Blanchet
MFC after:	3 days
2004-08-16 11:52:22 +00:00
David Malone
7f28a4189b Add Hungarian calendar entries.
PR:		42725
Submitted by:	Janos Mohacsi <janos.mohacsi@bsd.hu>
2004-08-16 09:31:09 +00:00
Pawel Jakub Dawidek
e81856c34c Connect RAID3 GEOM class to the build. 2004-08-16 06:36:21 +00:00
Gregory Neil Shapiro
d1fb385c10 Fix the startup logic for sendmail. If sendmail_enable=yes, don't start
the submit and outbound daemon, else if sendmail_submit_enable=yes, don't
start the outbound daemon.  Only one daemon should be started.

Also, do not rebuild database maps at boot time.  The code didn't pay
attention to SENDMAIL_MAP_TYPE and assumed 'hash'.  Also, admins may
not want maps automatically rebuilt just because the back end database
has changed.  Finally, some maps are built with mode tools than just
makemap (e.g., using cidrexpand on the access text file before sending
it to makemap).

Noticed by:	ache
Reviewed by:	ache
2004-08-05 03:09:54 +00:00
Mark Murray
e46792f8f1 Give sshd a secure startup, but with a tweakable timeout so that
the box won't hang forever at startup.
2004-08-04 08:10:37 +00:00
Hajimu UMEMOTO
bd872c1ccb Use RFC 3849 address for examples.
Pointed out by:	mistral@imasy.or.jp
MFC after:	1 week
2004-08-03 08:58:34 +00:00
Hajimu UMEMOTO
f6c223ace3 allow ::1 explicitly.
Pointed out by:	mistral@imasy.or.jp
MFC after:	1 week
2004-08-03 08:47:35 +00:00
Mark Murray
4c22eb57f3 UUCP's uucico(8) has not been in the base system for some time now,
so reflect this in the default. The uucp uid is a bit funny, and
is used by mtree in /var/spool for locks, so we can't remove it
without thinking about it a bit harder.
2004-08-01 21:33:47 +00:00
Pawel Jakub Dawidek
8a8fbaca32 Connect GEOM_MIRROR class to the build. 2004-07-30 23:18:53 +00:00
Mike Makonnen
83f00c3c07 Finish cleanup of rc.d/netif. It's now possible to start/stop more
than one interface from the command line:
	# /etc/rc.d/netif start bfe0 xl0
It's also possible to restart an interface(s):
	# /etc/rc.d/netif restart bfe0

This required some changes to rc.subr(8) so that if the start/stop commands
are overidden the rest of the command line (after the start/stop/etc... cmd)
is passed through to the subroutines.
2004-07-30 17:19:35 +00:00
Alexander Kabaev
81efba8c9e Bmake glue for GCC 3.4.2-prerelease. 2004-07-28 05:27:21 +00:00
Oliver Eikemeier
e193a85e5b back out the localkg changes until things have settled.
Discussed with:	mtm
2004-07-28 00:09:19 +00:00
Mike Makonnen
c6cb9d2e4b Even though binaries will give 0 matches, make it explicit. 2004-07-27 16:59:35 +00:00
Ruslan Ermilov
8d59f4fd45 Fixed style of previous commit. 2004-07-27 12:31:38 +00:00
Max Laier
a31f99f887 Fix typo in description of pflog_logfile.
Submitted by:	Mike Jakubik
2004-07-27 00:28:16 +00:00
Mike Makonnen
8f5490f5fe Correct typo.
Submitted by: eik (and probably many others)
2004-07-24 16:30:31 +00:00
Mike Makonnen
15eb1e8b45 Ports related rc.d cleanups:
o Separate out local (ports) scripts that use rc.d, and the old style
  startup/shutdown scripts and execute them separately. On startup the
  rc.d style scripts are executed first and then the old-style scripts.
  On shutdown, exactly the reverse happens.
o The rc.d ports scripts should now behave more like base system scripts.
  Scripts ending in .sh will be sourced into the current shell, while the
  rest will be executed in a subshell. Previously, all ports scripts,
  regardless of the .sh suffix, were executed in a subshell.
o The parent script, /etc/rc.d/localpkg, passes its command line arguments
  straight to the rc.d ports scripts. This means they should now honor
  faststop and faststart commands as well. Old style scripts, should not see
  any differences. They will still get either a start or stop command.
o The initial phrase shown during shutdown has been changed to use
  "local packages" instead of "daemon processes" to be more inline with the
  phrase used during local package startup. The phrases are also used only for
  old-style ports script startup/shutdown, whereas previously they were being
  used for both rc.d and old-style scripts. This should make startup/shutdown
  output a bit less ugly.

Discussed with:	portmgr
Has Reservations: eik
2004-07-24 14:56:21 +00:00
Ollivier Robert
5c0b01b427 Add /etc/ntp to hold keys for ntpd. 2004-07-21 10:14:10 +00:00
Simon L. B. Nielsen
64785dbd46 For the gbde attach script:
- Ask the user up to X times (3 by default) for the pass-phrase, if
  it is incorrect the first time.
- Add support for storing the lockfiles in another other directory
  than /etc.
- Document that it is possible to override the location of each single
  lockfile.

Approved by:	pjd
2004-07-18 18:01:48 +00:00
Colin Percival
39280ed384 Whitespace cleanup. This will simplify a future merge from
IANA's official list of port assignments.
2004-07-11 19:20:47 +00:00
Hartmut Brandt
598cbe94d5 Add a directory for the API include files. 2004-07-08 16:48:43 +00:00
Colin Percival
6242f82d07 Sort entries correctly. 2004-07-07 06:15:32 +00:00
Warner Losh
bbcf4bf60d Disable rescanning of the scsi bus for the scsi controllers. There
are some that really hate this, so now that devd is default, be more
conservative about what we do.

Noticed by: marcel
2004-07-05 20:16:30 +00:00
Colin Percival
f5e16e6131 Wrap rc.subr inside
if [ -z "${_rc_subr_loaded}" ]; then
_rc_subr_loaded="YES"
...
fi

in order to avoid re-interpreting rc.subr every time an rc.d
script is run.  In my tests, this speeds up rc time by about
8-10%.
2004-07-04 07:21:18 +00:00
Pawel Jakub Dawidek
e1237b285b Introduce GEOM_LABEL class.
This class is used for detecting volume labels on file systems:
UFS, MSDOSFS (FAT12, FAT16, FAT32) and ISO9660.
It also provide native labelization (there is no need for file system).

g_label_ufs.c is based on geom_vol_ffs from Gordon Tetlow.
g_label_msdos.c and g_label_iso9660.c are probably hacks, I just found
where volume labels are stored and I use those offsets here,
but with this class it should be easy to do it as it should be done by
someone who know how.
Implementing volume labels detection for other file systems also should
be trivial.

New providers are created in those directories:
/dev/ufs/ (UFS1, UFS2)
/dev/msdosfs/ (FAT12, FAT16, FAT32)
/dev/iso9660/ (ISO9660)
/dev/label/ (native labels, configured with glabel(8))

Manual page cleanups and some comments inside were submitted by
Simon L. Nielsen, who was, as always, very helpful. Thanks!
2004-07-02 19:40:36 +00:00
Maxim Konovalov
0d055a20bf Add user _pflogd. 2004-06-30 16:47:08 +00:00
Warner Losh
d8dbb9937b devd is now on by default
Reviewed by: dfr,njr (not nate!)
2004-06-30 15:58:46 +00:00
Mike Makonnen
3621fa11d7 Make the stop command respect the 'fast' prefix.
Most notably, this cleans up messages when shutting down from
single user. In such a case there are usually no daemons running,
but their pid files are still in /var/run. This causes rc.d to
output diagnostics about daemons with pidfiles, but that are
not running.
2004-06-26 09:27:30 +00:00
Mike Makonnen
0247998d45 Fix typo.
Submitted by: kuriyama
2004-06-24 16:57:49 +00:00
Max Laier
ae194ff619 It's /usr/sbin/nologin not /sbin/nologin
Found-by:	brueffer
Pointy-hat-to:	mlaier
2004-06-23 09:42:19 +00:00
Max Laier
b78518bb34 Swap order of ruleset load and enabling pf to work around a problem on altq
startup. Moreover, this is the "more logic" order.
2004-06-23 01:42:06 +00:00
Max Laier
8ee2ac9ef3 Add "privsep" user/group _pflogd:_pflogd (64:64) to make pflogd(8) work
again. This user/group is not required for install* targets, hence do not
add them to CHECK_UIDS/CHECK_GIDS in Makefile.inc1 (no need to annoy
people).

Discussed-on:	-current
2004-06-23 01:32:28 +00:00
Dag-Erling Smørgrav
e0ae81f32a Correct an error carried over from the nsswitch.conf(5) manual page; add
a note to UPDATING since users may have to manually remove an incorrect
nsswitch.conf.

Noticed by:	simon
2004-06-21 19:38:58 +00:00
Brian Feldman
d5ed4f061e Allow setting the system console keyboard via the ${keyboard} rc.conf
directive.
2004-06-18 20:09:30 +00:00
Max Laier
02b199f158 Link ALTQ to the build and break with ABI for struct ifnet. Please recompile
your (network) modules as well as any userland that might make sense of
sizeof(struct ifnet).
This does not change the queueing yet. These changes will follow in a
seperate commit. Same with the driver changes, which need case by case
evaluation.

__FreeBSD_version bump will follow.

Tested-by:	(i386)LINT
2004-06-13 17:29:10 +00:00
Olivier Houchard
79ef6aa9d1 Import the ttys file for arm.
make TARGET_ARCH=arm world now works (but still with external patches for
the toolchain bits).
2004-06-11 15:37:49 +00:00
David E. O'Brien
1a32b4cbcf Back out rev 1.3.
This is one of the few RC scripts that doesn't use rc.subr, and thus
doesn't source rc.conf. :-(
2004-06-08 19:53:25 +00:00
David E. O'Brien
749fdbb557 Don't assume everyone's /etc/[default/]rc.conf 'entropy_file' is "/entropy". 2004-06-07 09:16:19 +00:00
Mike Makonnen
30e2462c71 Restore pre-rcNG behaviour:
SIGINT (Ctrl-c) kills the current script
SIGQUIT (Ctrl-\) kills /etc/rc (dropping you into single-user)

Prodded by:	harti
2004-06-06 18:06:09 +00:00
Gregory Neil Shapiro
022f504564 Remove trailing space.
Submitted by:	jens
2004-06-06 17:28:31 +00:00
Jens Schweikhardt
d8beb0fd3b Removed whitespace at BOF, EOL & EOF. 2004-06-06 11:46:29 +00:00
MIHIRA Sanpei Yoshiro
ce62a94c13 fix MELCO LPC3-TX entry.
I mistaked at 1.166.

Submitted by:	SARUMARU Yoshihiko <mistral@imasy.or.jp>
Pointed out by:	MORIYASU Hirano <m-hirano@konsei.co.jp>
	FreeBSD-users-jp 79808
	FreeBSD-users-jp 79816
2004-06-05 06:11:54 +00:00
Hajimu UMEMOTO
389faa192d fix typo in comment in my previous commit. 2004-06-02 09:58:18 +00:00
Hajimu UMEMOTO
b351b78a10 Add ip6addrctl_enable and ip6_addrctl_verbose option. If
ip6addrctl_enable is set to YES, address selection policy is installed
into kernel.
If there is /etc/ip6addrctl.conf, it is used for address selection
policy.  Even if there is no /etc/ip6addrctl.conf, we install default
policy.  In this case, if ipv6_enable is set to YES, we use address
selection policy described in RFC 3484 as default.  Otherwise, we
install priority policy for IPv4 address.
The default of ip6addrctl_enable is NO for now.  However, it may
better to enable it by default.
2004-06-02 09:39:49 +00:00
Kris Kennaway
0adbaf30d9 Add common share/locale directories (everything used by >= 5 ports [1]) and
/usr/local/www

[1] Semi-arbitrary cutoff, but I didn't want to add every locale directory
    used by ports, because a lot are only used by one or two, and it's less
    intrusive for these ports to just clean up after themselves.

MFC after:	2 days
2004-05-31 07:34:40 +00:00
Nate Lawson
e6228fcfdc Throw the switch and enable use of the lowest idle states while online in
addition to offline.  This can be overridden in /etc/rc.conf if it causes
trouble although this has been stable since 2003/12.
2004-05-29 04:52:37 +00:00
Max Laier
0164e9d382 Add ftp-proxy 8021/tcp in order to make the inetd.conf entry actually work.
Submitted-by:	brueffer
Approved-by:	bms(mentor)
2004-05-27 23:42:26 +00:00
Dag-Erling Smørgrav
5f3ba2f5d4 Install nsswitch. 2004-05-24 14:17:19 +00:00
Dag-Erling Smørgrav
cba155c0c2 If nsswitch.conf does not exist, create it with the default settings.
The reason for doing this is that (at least some) 4.x binaries are very
unhappy if host.conf does not exist, and if we create host.conf but not
nsswitch.conf, nsswitch.conf will be created at the next reboot, so it
is better to create a correct nsswitch.conf right away.
2004-05-24 11:53:26 +00:00
Dag-Erling Smørgrav
749f60c715 Move the task of updating nsswitch.conf / host.conf into a separate
script called nsswitch.
2004-05-24 11:48:58 +00:00
Hajimu UMEMOTO
f269dc02de drop packet which has ::1 as src or dst via other than lo0
like as rc.firewall does.

MFC after:	1 week
2004-05-24 07:27:26 +00:00
Mike Makonnen
56d01be439 Really remove the return statement this time. Thanks to
ru for noticing.
2004-05-20 15:53:49 +00:00
Mike Makonnen
63d260104a The err routine requires two arguments: an exit value and a string.
Additionaly, it will exit the script so an return statements after
calling it are superflous.
2004-05-20 14:16:05 +00:00
Pawel Jakub Dawidek
680e586479 - Install includes used by STRIPE and NOP GEOM classes.
- Create needed directories.

Supported by:	Wheel - Open Technologies - http://www.wheel.pl
2004-05-20 10:29:26 +00:00
Josef Karthauser
bb1e7a5e19 Allow the location of the INDEX file to specified to pkg_version.
This is particularly convenient on a cluster of machines to prevent
having to rebuild the INDEX file on each.

Reviewed by:	portmgr
2004-05-19 09:18:08 +00:00
Nate Lawson
ccc09458fa Change hw.acpi.cpu.cx_lowest to accept values in the form of C1,
C2, ...  Update power_profile to use the new format.  Update the
man page to reflect this and give more info on Cx states.
2004-05-07 05:22:38 +00:00
Pawel Jakub Dawidek
b6d37dc477 Add g_concat.h and g_gate.h to be installed in
/usr/include/geom/(concat|gate)/.
2004-04-30 16:21:39 +00:00
Poul-Henning Kamp
d8337944e0 Protect som cross-script invocations by checks to see that the target
script exists.  This allows pruning of rc.d scripts without getting
too many ugly boottime error message
2004-04-28 13:20:15 +00:00
Poul-Henning Kamp
8956ceaff0 Initdiskless must run before ipfw, or people will not be able to
use the conf/* stuff for their firewall configuration.

Running ipfw before could seem to make sense in that it would allow
one to setup access to the NFS server on a "default-deny" kernel,
but it is pretty obvious to the casual observer that such a configuration
never makes it far enough to mount the NFS-root in the first place.
2004-04-28 13:18:22 +00:00
Ruslan Ermilov
3ee3cd3165 Replace shell's positional parameters safely. 2004-04-28 09:09:27 +00:00
Poul-Henning Kamp
edf28a672b When using this in non-NFSroot circumstances, mount -t nfs may
return empty.  Add a dummy element to prevent the alternate action
of the shell builtin "set"
2004-04-27 15:42:34 +00:00
Simon L. B. Nielsen
f59f70e231 Removes the check for the existence of the sysctl variable
debug.watchdog since it is not created by hardware watchdog(4) devices.
The watchdog(4) device is always compiled in the kernel, so removing the
check should not cause any problems.

Approved by:	phk
2004-04-26 19:41:37 +00:00
Tim J. Robbins
ab670aebec Add an Israel Hebrew locale: he_IL.UTF-8.
PR:		65826
Submitted by:	Hye-Shik Chang
2004-04-21 15:28:23 +00:00
Darren Reed
167992ad9a Add script for checking ipv6 blocked packets from PR.
PR:		misc/50154
Submitted by:	Kimura Fuyuki <fuyuki@hadaly.org>
2004-04-20 13:44:57 +00:00
Darren Reed
da48dbe191 apply patch so pr can be closed
PR:		misc/56715
Submitted by:	grant@NetBSD.org
Reviewed by:	darrenr
2004-04-20 13:30:49 +00:00
Max Khon
ca813d2986 sendmail_submit_enable and sendmail_outbound_enable checks were reverted.
Found by:	Morten Rodal <morten@rodal.no>
2004-04-17 19:09:09 +00:00
Brooks Davis
7aa81b88a2 Actually install preseedrandom.
Reported by:	bde
2004-04-17 04:12:27 +00:00
Brooks Davis
21462105eb Remove bogus checks on the value of ${entropy_file} and hardcode out
entropy source to /entropy.  We have to assume there is no rc.conf at
this stage of the boot process.

Reported by:	njl
2004-04-15 18:23:14 +00:00
Brooks Davis
6ea20e1c98 Band-aid diskless booting by running a new preseedrandom script before
initdiskless.  The output of several commands and if available the
contents of /entropy are feed into /dev/random to kickstart the PRNG.
/etc/rc.d/initrandom is left alone to maintain the previous behavior as
much as possiable.

Further work in this area is probably needed.

Discussed with:	markm
2004-04-15 17:52:53 +00:00
Hartmut Brandt
9de3b3505c Move the SNMP MIBs and tree definitions from /usr/share/bsnmp to
/usr/share/snmp. This mirrors the use of /usr/local/share/snmp and
makes also more sense when non-bsnmp-specific MIBs go in.
2004-04-14 16:06:19 +00:00
Brooks Davis
ff356053a1 Catch up with diskless split "diskless" is no longer provided.
Suggested by:	cperciva
2004-04-12 18:11:00 +00:00
Brian Feldman
87bd2f457b Document devfs_set_rulesets a little. 2004-04-10 22:13:27 +00:00
Scott Mitchell
24c8ae76c2 Add Xircom XEM5600 card (appears to be a renamed REM56).
Observe that Xircom CEM28 and CEM33 are known to work in Ethernet mode.

Reviewed by:	imp (mentor)
2004-04-09 17:15:18 +00:00
Mark Murray
37c79b8006 Take into account hardware-supplied entropy. If the entropy source
is hardware, the Yarrow initialisations don't need to be done.
2004-04-09 15:56:16 +00:00
Wes Peters
85d4d6aa5b Style fixes, as suggested by Jens Schweikhardt <schweikh@schweikhardt.net> 2004-04-06 23:15:48 +00:00
Wes Peters
6e46025ebf Split ramdisk processing in two so it can actually work. Ownerships
and permissions specified per rc.conf(5) now apply both to the md
device and to the mountpoint directory, after the mount has completed.
This has to be done in two steps, because chown is not available
until after /usr has been mounted, but the mdconfig and newfs steps
have to complete before fstab processing.
2004-04-06 18:26:43 +00:00
Max Khon
a3e34d6908 Add separate script for natd. This fixes race condition with "ipfw restart"
(when new natd is started before old natd died) and allows to manage natd
without touching ipfw.

natd should probably be killed with SIGKILL when stopping natd.
2004-04-05 16:29:45 +00:00
Max Khon
299b2a180b Allow this script to be used for Postfix:
- Use sendmail_foo variables after load_rc_config so that they actually work.
- Utilize sendmail_procname.
- Check sendmail_submit_enable instead of sendmail_enable when dealing
with mail submission MTA.
2004-04-05 16:26:22 +00:00
Max Khon
934c5da9c4 Document sendmail_pidfile variable.
Add sendmail_procname variable.
2004-04-05 16:22:14 +00:00
Max Laier
042d501cc7 Style:
- do not comment out entries in newsyslog.conf
 - use tabs to line up inetd.conf

Requested by:	bde
Approved by:	bms(mentor)
2004-04-03 17:52:29 +00:00
Max Laier
6cd9ebedd7 Add rc.d script to start pflogd and add rcvars etc. Also document vars in
rc.conf(5) and put a sample entry to newsyslog.conf

Reviewed by:	-current
Approved by:	bms(mentor)
2004-04-02 19:25:27 +00:00
Kirill Ponomarev
0a25d7a9ea - Use "/bin/hostname" explicitly instead of "hostname".
Approved by:	tobez
MFC after:	1 week
2004-04-02 12:18:40 +00:00
Kirill Ponomarev
c6e88cbf92 - Use absolute path for hostname(1)
Approved by:	green
2004-04-01 19:28:00 +00:00
Luigi Rizzo
99e9614386 Extensive documentation changes to the script, but only
comments and empty lines have been touched.

All of this should go in the diskless(8) manpage, now if we had
some kind of 'literate programming' tool to extract the comments
from the script and put them in a reasonable nroff format, it
would be a lot easier to keep code and docs in sync
2004-03-31 08:43:20 +00:00
Luigi Rizzo
220ee8be37 Minor changes mostly as discussed on the lists a few days ago:
+ SUBDIR.cpio.gz prevents files from SUBDIR/ to be copied when
   priming the memory filesystems. This restores the old behaviour
   and makes the copy process a lot more efficient

 + look for templates also in the list of directories supplied by
   bootp/dhcp via the T134 option aka kern.bootp_cookie

 + keep track of directories temporarily mounted with "remount"
   or "diskless_remount" commands and unmount them once we are done
   with them (at the end of this script).
2004-03-31 07:24:15 +00:00
Colin Percival
06dd89cd02 Synchronize with reality: nologin(8) is now in /usr/sbin
Reminded by:	trhodes
2004-03-30 19:19:02 +00:00
Dag-Erling Smørgrav
269c3d05f4 Remove the POSIX and en_US.US-ASCII links after ache@ explained why they
are unnecessary (and a bad idea).
2004-03-30 14:20:45 +00:00
Dag-Erling Smørgrav
696733c7fa Fix the case where $ntpdate_hosts was not specified and /etc/ntp.conf
does not exist.

Submitted by:	ru
2004-03-29 20:00:54 +00:00
Tim J. Robbins
83e01a4eab Add directories under /usr/share/nls and /usr/local/share/nls
for the new UTF-8 locales.

Reminded by:	ache
2004-03-29 11:07:35 +00:00
Doug Barton
af85ab16a3 A few small cleanups:
1. Add the shutdown keyword so that the script is run at shutdown time,
and the mixer* files are saved.
2. Twiddle whitespace.
3. Remove an unecessary function, and therefore collapse one variable.
2004-03-27 09:26:22 +00:00
Tim J. Robbins
839b21a6f4 Add UTF-8 versions of all the currently supported system locales. Most of
the hard work was done by Hye-Shik Chang in the misc/utf8locale port; I made
a few minor adjustments and merged the makefiles.

PR:	44307
2004-03-27 08:14:15 +00:00
Ruslan Ermilov
fd3fbdbe46 Removed more vestiges of the stl(4) driver. 2004-03-26 18:49:11 +00:00
Max Laier
f5559064a9 Install the pf rc.d-script (missed Makefile update in original commit)
Approved by:	bms(mentor)
2004-03-24 21:54:44 +00:00
David E. O'Brien
999daea6a5 Back out revision 1.295. share/libdata/gcc/ is valid and used. 2004-03-24 19:37:53 +00:00
Pawel Jakub Dawidek
b4dae77e8b Added 'nojail' keyword for rc.d/mixer script, while mixer(8) is not
usable in jail by default (no /dev/mixer).
2004-03-24 12:49:34 +00:00
Dag-Erling Smørgrav
3a895c1a1b Previous commit should have read: remove share/libdata/doscmd/{,fonts/}.
This time around, remove share/libdata/gcc/ which seems unused.
2004-03-24 08:21:30 +00:00
Dag-Erling Smørgrav
f13afd61f8 Remove share/doscmd/{,fonts/} 2004-03-24 08:19:46 +00:00
Brooks Davis
3e091039ee Overhaul the /etc/rc.d/diskless script by splitting it out into
hostname, resolve, tmp, and var scripts.  The latter three are new and
were repo copied.  These scripts no longer depend on being booted with
and NFS root instead attempt to automaticly create mfs /tmp and /var
volumes if the they are not writable.  This behavior can be overridden
in /etc/rc.conf.

Reviewed by:    luigi, pjd
2004-03-23 23:22:35 +00:00
Max Laier
1f4408f321 Add rc.d script for pf(4) (more to come once pflogd(8) works as well).
Update defaults and write some lines for rc.conf(5) also.
Mostly dup'ed from ipf

Reviewed by:	-current
Approved by:	bms(mentor)
2004-03-23 22:30:15 +00:00
Dag-Erling Smørgrav
dde5634ff5 Drop the -d argument to mtree since some of the spec files now list
symlinks.
2004-03-23 22:17:34 +00:00
Dag-Erling Smørgrav
35f65ad07d Add share/nls/{POSIX,en_US.US-ASCII} as symlinks to C. 2004-03-23 22:16:38 +00:00
Dag-Erling Smørgrav
75213c3ed7 Set start_cmd and stop_cmd correctly so the code that extracts the names
of the ntp servers from ntp.conf is actually used.  Remove pidfile since
ntpdate is not a daemon.
2004-03-22 16:35:35 +00:00
Maxim Konovalov
0f8f86b71f o Add user proxy. 2004-03-20 19:13:06 +00:00
Brian Feldman
1cc06a21b6 Add a way for rc.d/devfs to set more than just the system devfs up.
Yes, this means for stuff OTHER than jails, too.  Example usage:
#devfs_system_ruleset="root"
devfs_set_rulesets="/dev=root /etc/namedb/dev=named_devfs"
2004-03-20 07:10:16 +00:00
Chad David
450e8255a1 Echo and pass dumpdev as the device argument to savecore.
PR: bin/51655
2004-03-18 15:18:20 +00:00
John Baldwin
659dc72f99 Add a mixer script that saves the current settings of all mixers present
in the system on shutdown and restores the settings on boot.  The settings
can also be reset to the saved values via 'mixer reload'.

Reviewed by:	current@
2004-03-15 23:09:17 +00:00
Wes Peters
68898c7350 Add script for creating ramdisks at boot time, in time to be processed
by fstab.
2004-03-15 18:36:21 +00:00
Doug Barton
0a54defb08 1. Remove the named_rcng variable. Mike's caution in this area was a good
thing, but we're ready to move on.

2. Remove the -g default argument in named_flags. It doesn't actually do
what most users think it does, and what most users want it to do is already
accomplished with a proper default group for the bind user, which we have.
Also, the -g knob does something entirely different in BIND 9, which leads
to a lot of needless confusion/aggravation.

3. In the rc.d script, don't bogusly override $command, or $rc_flags. Both
are adequately handled in rc.conf[.local].

4. DO properly override $rc_flags if user has named_chrootdir set.
This may need to be revisited, but should be ok for now.

5. Protect all chrootdir-related bits under that variable, instead of
named_rcng.

There is more work to be done here, especially in the area of BIND 9
compatibility, but this is a start at least.

Prompted in part by (legitmate) grousing from: kuriyama, Randy Bush
2004-03-14 19:10:06 +00:00
Ruslan Ermilov
920fa8dcbd I believe most of /boot/device.hints out there are based (if not
identical) on GENERIC.hints, hence the following change:

Moved the creation of /boot/device.hints where it belongs.  This
should aid in merging GENERIC.hints changes to /boot/device.hints,
using mergemaster(8) or a similar approach.
2004-03-14 17:18:39 +00:00
Colin Percival
0d9f6ca061 Fix odd grammar in comment.
PR:		docs/64190
Submitted by:	Dan Langille
2004-03-13 05:16:42 +00:00
Brooks Davis
14b34e45f8 If /conf/diskless_remount exists, use it to remount the entire /conf
directory.  This allows multiple roots (say for different architectures)
to share the same set of /conf files.
2004-03-12 04:40:16 +00:00
Dag-Erling Smørgrav
dc9e0bf4e5 Turn on logging for tftpd. 2004-03-11 22:15:28 +00:00
Tim Kientzle
9a7e5d92a7 Don't run fsck if there's no /etc/fstab.
In particular, this allows a "virgin" system installed from
source (installworld, installkernel, cd etc && make distribution)
to boot correctly and modestly simplifies the creation
of single-partition network/cdrom/CF bootable images.
2004-03-11 20:00:10 +00:00
Max Laier
cf339f9bb9 ftp-proxy no longer lives in /usr/local/...
Noticed by:	Pyun YongHyeon
Approved by:	bms(mentor)
2004-03-10 15:06:17 +00:00
Max Laier
be3e0526c2 Add trailing collon
Noticed by:	dwhite
Approved by:	bms(mentor)
2004-03-10 15:04:29 +00:00
Poul-Henning Kamp
4238829d77 Make this file more generally usable:
Trigger not only on diskless booting sysctls being set, but also
on the existence of the file "/etc/diskless".  But do not try to
extract IP# related keywords in that case.

Add a general "remount" facility to allow non-NFS remounting.
2004-03-09 23:06:50 +00:00
Alex Dupre
c99b727a37 Fix typos.
Approved by:	blackend (mentor/implicitly)
2004-03-08 23:18:50 +00:00
Max Laier
8d69c48be5 Link pf to the build and install:
This adds the former ports registered groups: proxy and authpf as well as
the proxy user. Make sure to run mergemaster -p in oder to complete make
installworld without errors.

This also provides the passive OS fingerprints from OpenBSD (pf.os) and an
example pf.conf.

For those who want to go without pf; it provides a NO_PF knob to make.conf.

__FreeBSD_version will be bumped soon to reflect this and to be able to
change ports accordingly.

Approved by:	bms(mentor)
2004-03-08 22:03:29 +00:00
Pawel Jakub Dawidek
bd57d5b0f5 Mark scripts as not usable inside a jail by adding keyword 'nojail'.
Some suggestions from:	rwatson, Ruben de Groot <mail25@bzerk.org>
2004-03-08 12:25:05 +00:00
Pawel Jakub Dawidek
01b373bed7 Fix skipping scripts with given keywords.
Proper syntax is '-s keyword1 -s keyword2', not '-s keyword1 keyword2'.
2004-03-08 12:02:07 +00:00
Bruce Evans
6ed53a0a05 Removed definition of NOPROG. It was just a style bug (a NetBSD macro
that became obsolete in NetBSD 22 months ago).

Submitted by:	ru
2004-03-05 16:13:22 +00:00
Pawel Jakub Dawidek
6be8dbad95 One tab too much. 2004-03-05 09:18:40 +00:00
Pawel Jakub Dawidek
303d38369a Teach 'hostname' script how to act inside a jail.
No objections from:	mtm, arch@
2004-03-05 09:17:01 +00:00