system calls now enter without Giant held, and then in some cases, acquire
Giant explicitly.
Remove a number of other MPSAFE annotations in the credential code and
tweak one or two other adjacent comments.
PRIO_USER case, possibly also other places that deferences
p_ucred.
In the past, we insert a new process into the allproc list right
after PID allocation, and release the allproc_lock sx. Because
most content in new proc's structure is not yet initialized,
this could lead to undefined result if we do not handle PRS_NEW
with care.
The problem with PRS_NEW state is that it does not provide fine
grained information about how much initialization is done for a
new process. By defination, after PRIO_USER setpriority(), all
processes that belongs to given user should have their nice value
set to the specified value. Therefore, if p_{start,end}copy
section was done for a PRS_NEW process, we can not safely ignore
it because p_nice is in this area. On the other hand, we should
be careful on PRS_NEW processes because we do not allow non-root
users to lower their nice values, and without a successful copy
of the copy section, we can get stale values that is inherted
from the uninitialized area of the process structure.
This commit tries to close the race condition by grabbing proc
mutex *before* we release allproc_lock xlock, and do copy as
well as zero immediately after the allproc_lock xunlock. This
guarantees that the new process would have its p_copy and p_zero
sections, as well as user credential informaion initialized. In
getpriority() case, instead of grabbing PROC_LOCK for a PRS_NEW
process, we just skip the process in question, because it does
not affect the final result of the call, as the p_nice value
would be copied from its parent, and we will see it during
allproc traverse.
Other potential solutions are still under evaluation.
Discussed with: davidxu, jhb, rwatson
PR: kern/108071
MFC after: 2 weeks
set real-time priority on a thread. It looks like this suser(9)
call was introduced after my first pass through replacing superuser
checks with named privilege checks.
Make part of John Birrell's KSE patch permanent..
Specifically, remove:
Any reference of the ksegrp structure. This feature was
never fully utilised and made things overly complicated.
All code in the scheduler that tried to make threaded programs
fair to unthreaded programs. Libpthread processes will already
do this to some extent and libthr processes already disable it.
Also:
Since this makes such a big change to the scheduler(s), take the opportunity
to rename some structures and elements that had to be moved anyhow.
This makes the code a lot more readable.
The ULE scheduler compiles again but I have no idea if it works.
The 4bsd scheduler still reqires a little cleaning and some functions that now do
ALMOST nothing will go away, but I thought I'd do that as a separate commit.
Tested by David Xu, and Dan Eischen using libthr and libpthread.
specific privilege names to a broad range of privileges. These may
require some future tweaking.
Sponsored by: nCircle Network Security, Inc.
Obtained from: TrustedBSD Project
Discussed on: arch@
Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri,
Alex Lyashkov <umka at sevcity dot net>,
Skip Ford <skip dot ford at verizon dot net>,
Antoine Brodin <antoine dot brodin at laposte dot net>
triggers.
This should eliminate all the trivial messages which result from minor
increases in cpu_tick frequency.
Machines which don't du cpu clock fiddling shouldn't issue "backwards"
messages now.
Laptops and other machines where the initial estimate of cputicks may be
waaaay off will still issue warnings.
a calcru() wrapper that passes a local rusage_ext on the stack that is
a snapshot to do the calculations on. Now we can pass p->p_crux to
calcru1() in calccru() again which fixes the issues with runtime going
backwards messages when dead processes are harvested by init.
Reviewed by: phk
Tested by: Stefan Ehmann shoesoft at gmx dot net
Keep accounting time (in per-cpu) cputicks and the statistics counts
in the thread and summarize into struct proc when at context switch.
Don't reach across CPUs in calcru().
Add code to calibrate the top speed of cpu_tickrate() for variable
cpu_tick hardware (like TSC on power managed machines).
Don't enforce monotonicity (at least for now) in calcru. While the
calibrated cpu_tickrate ramps up it may not be true.
Use 27MHz counter on i386/Geode.
Use TSC on amd64 & i386 if present.
Use tick counter on sparc64
Keep track of time spent by the cpu in various contexts in units of
"cputicks" and scale to real-world microsec^H^H^H^H^H^H^H^Hclock_t
only when somebody wants to inspect the numbers.
For now "cputicks" are still derived from the current timecounter
and therefore things should by definition remain sensible also on
SMP machines. (The main reason for this first milestone commit is
to verify that hypothesis.)
On slower machines, the avoided multiplications to normalize timestams
at every context switch, comes out as a 5-7% better score on the
unixbench/context1 microbenchmark. On more modern hardware no change
in performance is seen.
the raw values including for child process statistics and only compute the
system and user timevals on demand.
- Fix the various kern_wait() syscall wrappers to only pass in a rusage
pointer if they are going to use the result.
- Add a kern_getrusage() function for the ABI syscalls to use so that they
don't have to play stackgap games to call getrusage().
- Fix the svr4_sys_times() syscall to just call calcru() to calculate the
times it needs rather than calling getrusage() twice with associated
stackgap, etc.
- Add a new rusage_ext structure to store raw time stats such as tick counts
for user, system, and interrupt time as well as a bintime of the total
runtime. A new p_rux field in struct proc replaces the same inline fields
from struct proc (i.e. p_[isu]ticks, p_[isu]u, and p_runtime). A new p_crux
field in struct proc contains the "raw" child time usage statistics.
ruadd() has been changed to handle adding the associated rusage_ext
structures as well as the values in rusage. Effectively, the values in
rusage_ext replace the ru_utime and ru_stime values in struct rusage. These
two fields in struct rusage are no longer used in the kernel.
- calcru() has been split into a static worker function calcru1() that
calculates appropriate timevals for user and system time as well as updating
the rux_[isu]u fields of a passed in rusage_ext structure. calcru() uses a
copy of the process' p_rux structure to compute the timevals after updating
the runtime appropriately if any of the threads in that process are
currently executing. It also now only locks sched_lock internally while
doing the rux_runtime fixup. calcru() now only requires the caller to
hold the proc lock and calcru1() only requires the proc lock internally.
calcru() also no longer allows callers to ask for an interrupt timeval
since none of them actually did.
- calcru() now correctly handles threads executing on other CPUs.
- A new calccru() function computes the child system and user timevals by
calling calcru1() on p_crux. Note that this means that any code that wants
child times must now call this function rather than reading from p_cru
directly. This function also requires the proc lock.
- This finishes the locking for rusage and friends so some of the Giant locks
in exit1() and kern_wait() are now gone.
- The locking in ttyinfo() has been tweaked so that a shared lock of the
proctree lock is used to protect the process group rather than the process
group lock. By holding this lock until the end of the function we now
ensure that the process/thread that we pick to dump info about will no
longer vanish while we are trying to output its info to the console.
Submitted by: bde (mostly)
MFC after: 1 month
somewhat clearer, but more importantly allows for a consistent naming
scheme for suser_cred flags.
The old name is still defined, but will be removed in a few days (unless I
hear any complaints...)
Discussed with: rwatson, scottl
Requested by: jhb
where it is known to detect a problem but the problem is not very easy
to fix. The warning became very common recently after a call to calcru()
was added to fill_kinfo_thread().
Another (much older) cause of "negative times" (actually non-monotonic
times) was fixed in rev.1.237 of kern_exit.c.
Print separate messages for non-monotonic and negative times.
It's not quite correct from a posix Point Of view, but it is a lot better
than what was there before. This will be revisited later
when we decide what form our priority extensions will take. Posix doesn't
specify how a system scope thread can change its priority so you need to
add non-standard extensions to be able to do it..
For now make this slightly non standard to allow it to be done.
Submitted by: Dan Eischen originally, changed by myself.
RLIM_INFINITY case for ogetrlimit().
- Use %jd and intmax_t to output negative time in usec in calcru().
- Rework getrusage() to make a copy of the rusage struct into a local
variable while holding Giant and then do the copyout from the local
variable to avoid having to have the original process rusage struct
locked while doing the copyout (which would not be safe). This also
includes a few style fixes from Bruce to getrusage().
Submitted by: bde (1, parts of 3)
Suggested by: bde (2)
- struct plimit includes a mutex to protect a reference count. The plimit
structure is treated similarly to struct ucred in that is is always copy
on write, so having a reference to a structure is sufficient to read from
it without needing a further lock.
- The proc lock protects the p_limit pointer and must be held while reading
limits from a process to keep the limit structure from changing out from
under you while reading from it.
- Various global limits that are ints are not protected by a lock since
int writes are atomic on all the archs we support and thus a lock
wouldn't buy us anything.
- All accesses to individual resource limits from a process are abstracted
behind a simple lim_rlimit(), lim_max(), and lim_cur() API that return
either an rlimit, or the current or max individual limit of the specified
resource from a process.
- dosetrlimit() was renamed to kern_setrlimit() to match existing style of
other similar syscall helper functions.
- The alpha OSF/1 compat layer no longer calls getrlimit() and setrlimit()
(it didn't used the stackgap when it should have) but uses lim_rlimit()
and kern_setrlimit() instead.
- The svr4 compat no longer uses the stackgap for resource limits calls,
but uses lim_rlimit() and kern_setrlimit() instead.
- The ibcs2 compat no longer uses the stackgap for resource limits. It
also no longer uses the stackgap for accessing sysctl's for the
ibcs2_sysconf() syscall but uses kernel_sysctl() instead. As a result,
ibcs2_sysconf() no longer needs Giant.
- The p_rlimit macro no longer exists.
Submitted by: mtm (mostly, I only did a few cleanups and catchups)
Tested on: i386
Compiled on: alpha, amd64
multiple mutex pools with different options and sizes. Mutex pools can
be created with either the default sleep mutexes or with spin mutexes.
A dynamically created mutex pool can now be destroyed if it is no longer
needed.
Create two pools by default, one that matches the existing pool that
uses the MTX_NOWITNESS option that should be used for building higher
level locks, and a new pool with witness checking enabled.
Modify the users of the existing mutex pool to use the appropriate pool
in the new implementation.
Reviewed by: jhb
kg_nice is now protected by both. Being protected by both means that
other places in the kernel that want to read kg_nice only need one of the
two locks.
of ksegs since they primarily operation on processes.
- KSEs take ticks so pass the kse through sched_clock().
- Add a sched_class() routine that adjusts a ksegrp pri class.
- Define a sched_fork_{kse,thread,ksegrp} and sched_exit_{kse,thread,ksegrp}
that will be used to tell the scheduler about new instances of these
structures within the same process. These will be used by THR and KSE.
- Change sched_4bsd to reflect this API update.
used to share resource limits between rfork threads, but never was.
Removing it makes resource limit locking much simpler -- only the current
process can change the contents of the structure that p_limit points to.
