but committing it helps to get everyone on the same page and makes
sure we make progress.
Tinderbox breakages that are the result of this commit are entirely
the committer's fault -- in other words: buildworld testing on amd64
only.
Credits follow:
Submitted by: Garrett Cooper <yanegomi@gmail.com>
Sponsored by: Isilon Systems
Based on work by: keramida@
Thanks to: gnn@, mdf@, mlaier@, sjg@
Special thanks to: keramida@
1. Don't do upgrade_checks when using bmake. As long as we have WITH_BMAKE,
there's a bootstrap complication in ths respect. Avoid it. Make the
necessary changes to have upgrade_checks work wth bmake anyway.
2. Remove the use of -E. It's not needed in our build because we use ?= for
the respective variables, which means that we'll take the environment
value (if any) anyway.
3. Properly declare phony targets as phony as bmake is a lot smarter (and
thus agressive) about build avoidance.
4. Make sure CLEANFILES is complete and use it on .NOPATH. bmake is a lot
smarter about build avoidance and should not find files we generate in
the source tree. We should not have files in the repository we want to
generate, but this is an easier way to cross this hurdle.
5. Have behavior under bmake the same as it is under make with respect to
halting when sub-commands fail. Add "set -e" to compound commands so
that bmake is informed when sub-commands fail.
6. Make sure crunchgen uses the same make as the rest of the build. This
is important when the make utility isn't called make (but bmake for
example).
7. While here, add support for using MAKEOBJDIR to set the object tree
location. It's the second alternative bmake looks for when determining
the actual object directory (= .OBJDIR).
Submitted by: Simon Gerraty <sjg@juniper.net>
Submitted by: John Van Horne <jvanhorne@juniper.net>
of FreeBSD's make by setting WITH_BMAKE. The WITH_BMAKE build makes it
easy for people to switch while working out the kinks -- think ports
tree here. The option will be removed in due time.
Submitted by: Simon Gerraty (sjg@juniper.net)
versions. Instead use Imp's good work on "legacy" and follow the outcome
of the previous TRB discussions on this topic.
Now use the libc getline() if it exists, and only where it doesn't
create a bootstraping version.
deprecated sysinstall(8). NOTE: WITH_BSDCONFIG is currently required.
Submitted by: Devin Teske (dteske), Ron McDowell <rcm@fuzzwad.org>
Reviewed by: Ron McDowell <rcm@fuzzwad.org>
Approved by: Ed Maste (emaste)
to build FreeBSD (they are used in Perl man pages). We never needed embedded
"!" in targets that I can find.
We got this from OpenBSD and I cannot find any other make that supports
such things -- contrary to their commit message claim: "This behaviour
is also consistent with other versions of make.".
Do not condition usr.sbin/pkg building on WITHOUT_PKGTOOLS anymore, so that users can
remove the old pkg_* tools without removing the pkgng boostrap
Approved by: des (mentor)
MFC after: 1 month
"gnusort". Most of the BSD sort development work was done by
Oleg Moskalenko <oleg.moskalenko@citrix.com>.
- GNU grep can be set to default by setting WITH_GNU_GREP. It will cause
BSD sort to be installed as "bsdsort".
Portbuild tested by: linimon
The NAND Flash environment consists of several distinct components:
- NAND framework (drivers harness for NAND controllers and NAND chips)
- NAND simulator (NANDsim)
- NAND file system (NAND FS)
- Companion tools and utilities
- Documentation (manual pages)
This work is still experimental. Please use with caution.
Obtained from: Semihalf
Supported by: FreeBSD Foundation, Juniper Networks
"bsdsort" and GNU sort will be the default "sort". When WITH_BSD_SORT
is set, BSD sort will be the default "sort" and GNU sort will be installed
as "gnusort".
several new kerberos related libraries and applications to FreeBSD:
o kgetcred(1) allows one to manually get a ticket for a particular service.
o kf(1) securily forwards ticket to another host through an authenticated
and encrypted stream.
o kcc(1) is an umbrella program around klist(1), kswitch(1), kgetcred(1)
and other user kerberos operations. klist and kswitch are just symlinks
to kcc(1) now.
o kswitch(1) allows you to easily switch between kerberos credentials if
you're running KCM.
o hxtool(1) is a certificate management tool to use with PKINIT.
o string2key(1) maps a password into key.
o kdigest(8) is a userland tool to access the KDC's digest interface.
o kimpersonate(8) creates a "fake" ticket for a service.
We also now install manpages for some lirbaries that were not installed
before, libheimntlm and libhx509.
- The new HEIMDAL version no longer supports Kerberos 4. All users are
recommended to switch to Kerberos 5.
- Weak ciphers are now disabled by default. To enable DES support (used
by telnet(8)), use "allow_weak_crypto" option in krb5.conf.
- libtelnet, pam_ksu and pam_krb5 are now compiled with error on warnings
disabled due to the function they use (krb5_get_err_text(3)) being
deprecated. I plan to work on this next.
- Heimdal's KDC now require sqlite to operate. We use the bundled version
and install it as libheimsqlite. If some other FreeBSD components will
require it in the future we can rename it to libbsdsqlite and use for these
components as well.
- This is not a latest Heimdal version, the new one was released while I was
working on the update. I will update it to 1.5.2 soon, as it fixes some
important bugs and security issues.
installs clang as /usr/bin/cc, /usr/bin/c++ and /usr/bin/cpp.
Note this does *not* disable building and installing gcc, which will
still be available as /usr/bin/gcc, /usr/bin/g++ and /usr/bin/gcpp. If
you want to disable gcc completely, you must use WITHOUT_GCC.
MFC after: 2 weeks
At first, I added a utility called utxrm(8) to remove stale entries from
the user accounting database. It seems there are cases in which we need
to perform different operations on the database as well. Simply rename
utxrm(8) to utx(8) and place the old code under the "rm" command.
In addition to "rm", this tool supports "boot" and "shutdown", which are
going to be used by an rc-script which I am going to commit separately.
kernel modules that include binary-only code.
More fine-grained control is provided via MK_SOURCELESS_HOST (for native code
that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode).
Reviewed by: julian, delphij, freebsd-arch
Approved by: kib (mentor)
MFC after: 2 weeks
The wtmpcvt(1) utility converts wtmp files to the new format used by
utmpx(3). Now that HEAD has been branched to stable/9 and 9.0 is
released, there is no need for it in HEAD.
MFC after: never
allow the built-in operations to be redefined, at least not without
excessive force).
Instead, just disable LLVM's support for atomic operations for now.
Nothing in either clang or the tablegen tools currently depends on it.
This still allows users of head built before r198344 to upgrade to
top-of-head seamlessly.
emits calls for them, rather than expanding them inline. Older FreeBSD
versions compile for i386 by default and as such we end up with
unresolved symbols when we build LLVM's TableGen utility as a build
tool on them. Add the functions that GCC emits here, but don't bother
to make them atomic. Such is not needed.
Submitted by: marcel
MFC after: 1 week
This knob removes the tools that are exclusively used to view and
maintain the databases maintained by utmpx, namely last, users, who,
wtmpcvt, ac, lastlogin and utxrm.
The tool w is not in this list, because it has some other functionality
which is unrelated to utmpx; it is hardlinked to the uptime tool.
The WITHOUT_ACCT switch is supposed to omit tools related to process
accounting, namely accton and sa. ac(8) is just a simple tool that
prints statistics based on data in the utx.log database. It has nothing
to do with the former.
