This commit adds the priv(9) that waters down the sysctl to make it only
allow read(2) of a dirfd by the system root. Jailed root is not allowed, but
jail policy and superuser policy will abstain from allowing/denying it so
that a MAC module can fully control the policy.
Such a MAC module has been written, and can be found at:
https://people.freebsd.org/~kevans/mac_read_dir-0.1.0.tar.gz
It is expected that the MAC module won't be needed by many, as most only
need to do such diagnostics that require this behavior as system root
anyways. Interested parties are welcome to grab the MAC module above and
create a port or locally integrate it, and with enough support it could see
introduction to base. As noted in mac_read_dir.c, it is released under the
BSD 2 clause license and allows the restrictions to be lifted for only
jailed root or for all unprivileged users.
PR: 246412
Reviewed by: mckusick, kib, emaste, jilles, cy, phk, imp (all previous)
Reviewed by: rgrimes (latest version)
Differential Revision: https://reviews.freebsd.org/D24596
Historically, we've allowed read() of a directory and some filesystems will
accommodate (e.g. ufs/ffs, msdosfs). From the history department staffed by
Warner: <<EOF
pdp-7 unix seemed to allow reading directories, but they were weird, special
things there so I'm unsure (my pdp-7 assembler sucks).
1st Edition's sources are lost, mostly. The kernel allows it. The
reconstructed sources from 2nd or 3rd edition read it though.
V6 to V7 changed the filesystem format, and should have been a warning, but
reading directories weren't materially changed.
4.1b BSD introduced readdir because of UFS. UFS broke all directory reading
programs in 1983. ls, du, find, etc all had to be rewritten. readdir() and
friends were introduced here.
SysVr3 picked up readdir() in 1987 for the AT&T fork of Unix. SysVr4 updated
all the directory reading programs in 1988 because different filesystem
types were introduced.
In the 90s, these interfaces became completely ubiquitous as PDP-11s running
V7 faded from view and all the folks that initially started on V7 upgraded
to SysV. Linux never supported this (though I've not done the software
archeology to check) because it has always had a pathological diversity of
filesystems.
EOF
Disallowing read(2) on a directory has the side-effect of masking
application bugs from relying on other implementation's behavior
(e.g. Linux) of rejecting these with EISDIR across the board, but allowing
it has been a vector for at least one stack disclosure bug in the past[0].
By POSIX, this is implementation-defined whether read() handles directories
or not. Popular implementations have chosen to reject them, and this seems
sensible: the data you're reading from a directory is not structured in some
unified way across filesystem implementations like with readdir(2), so it is
impossible for applications to portably rely on this.
With this patch, we will reject most read(2) of a dirfd with EISDIR. Users
that know what they're doing can conscientiously set
bsd.security.allow_read_dir=1 to allow read(2) of directories, as it has
proven useful for debugging or recovery. A future commit will further limit
the sysctl to allow only the system root to read(2) directories, to make it
at least relatively safe to leave on for longer periods of time.
While we're adding logic pertaining to directory vnodes to vn_io_fault, an
additional assertion has also been added to ensure that we're not reaching
vn_io_fault with any write request on a directory vnode. Such request would
be a logical error in the kernel, and must be debugged rather than allowing
it to potentially silently error out.
Commented out shell aliases have been placed in root's chsrc/shrc to promote
awareness that grep may become noisy after this change, depending on your
usage.
A tentative MFC plan has been put together to try and make it as trivial as
possible to identify issues and collect reports; note that this will be
strongly re-evaluated. Tentatively, I will MFC this knob with the default as
it is in HEAD to improve our odds of actually getting reports. The future
priv(9) to further restrict the sysctl WILL NOT BE MERGED BACK, so the knob
will be a faithful reversion on stable/12. We will go into the merge
acknowledging that the sysctl default may be flipped back to restore
historical behavior at *any* point if it's warranted.
[0] https://www.freebsd.org/security/advisories/FreeBSD-SA-19:10.ufs.asc
PR: 246412
Reviewed by: mckusick, kib, emaste, jilles, cy, phk, imp (all previous)
Reviewed by: rgrimes (latest version)
MFC after: 1 month (note the MFC plan mentioned above)
Relnotes: absolutely, but will amend previous RELNOTES entry
Differential Revision: https://reviews.freebsd.org/D24596
A logic bug in remove_protocol() meant that it would remove (leak) all
structures in the list preceding the one intended for removal.
PR: 245971
Submitted by: joost@jodocus.org (original version)
MFC after: 1 week
Remove world-readability from the root directory. Sensitive information may be
stored in /root and we diverge here from normative administrative practice, as
well as installation defaults of other Unix-alikes. The wheel group is still
permitted to read the directory.
750 is no more restrictive than defaults for the rest of the open source
Unix-alike world. In particular, Ben Woods surveyed DragonFly, NetBSD,
OpenBSD, ArchLinux, CentOS, Debian, Fedora, Slackware, and Ubuntu. None have a
world-readable /root by default.
Submitted by: Gordon Bergling <gbergling AT gmail.com>
Reviewed by: ian, myself
Discussed with: emaste (informal approval)
Relnotes: sure?
Differential Revision: https://reviews.freebsd.org/D23392
Now options -g/-G allow to select/unselect interfaces by groups
in the "ifconfig -a" output just like already existing -d/-u.
Examples:
to exclude loopback from the list: ifconfig -a -G lo
to show vlan interfaces only: ifconfig -a -g vlan
to show tap interfaces that are up: ifconfig -aug tap
Arguments to -g/-G may be shell patterns and both may be specified.
Later options -g/-G override previous ones.
MFC after: 2 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D25029
That assumption should be true when superio(4) uses the hardware
exlusively. But it turns out to not hold on some real systems.
So, err on the side of correctness rather than performance.
Clear current_ldn in sio_conf_exit.
Reported by: bz
Tested by: bz
MFC after: 1 week
Some capability descriptions under list scan actually described flags.
Some capability descriptions were missing.
Some flag descriptions under list sta actually described capabilites.
Reviewed by: adrian
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25014
The fdatasync() description in POSIX specifies that
all I/O operations shall be completed as defined for synchronized I/O
data integrity completion.
and then the explanation of Synchronized I/O Data Integrity Completion says
The write is complete only when the data specified in the write
request is successfully transferred and all file system
information required to retrieve the data is successfully
transferred.
For UFS this means that all pointers must be on disk. Indirect
pointers already contribute to the list of dirty data blocks, so only
direct blocks and root pointers to indirect blocks, both of which
reside in the inode block, should be taken care of. In ffs_balloc(),
mark the inode with the new flag IN_IBLKDATA that specifies that
ffs_syncvnode(DATA_ONLY) needs a call to ffs_update() to flush the
inode block.
Reviewed by: mckusick
Discussed with: tmunro
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D25072
As with r361769 (man page), PROT_* are properly called protections, not
permissions.
MFC after: 1 week
MFC with: r361769
Sponsored by: The FreeBSD Foundation
Prior to r174547, getgrouplist(3) always returned a groups list with
element 0 and 1 set to the basegid argument, so long as ngroups was > 1.
Post-r174547 this is not the case. r328304 disabled the deduplication that
removed the duplicate, but the duplicate still does not occur unless the
group for a user in the password database is also entered in the group
database.
This patch fixes mountd so that it handles the case where a user specified
with the -maproot or -mapall exports option has a getgrouplist(3) groups
list where groups[0] != groups[1].
Found while testing another mountd patch.
MFC after: 2 weeks
This specifically fixes that TX frames are large enough now to hold a 3900 odd
byte AMSDU (the little ones); me flipping it on earlier messed up transmit!
Tested:
* if_run, STA mode, TX/RX TCP/UDP iperf. TCP is now back to normal and
correctly does ~ 3200 byte AMSDU/fast frames (2x1600ish byte MSDUs).
for pthread_get_name_np() and pthread_set_name_np(), to be
compatible with Linux.
PR: 238404
Proposed and reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D25117
One of the error descriptions referred to permissions; in context the
meaning was probably clear, but the prot values are properly called
protections.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
This flips on basic 11n for 2GHz/5GHz station operation.
* It flips on HT20 and MCS rates;
* It enables A-MPDU decap - the payload format is a bit different;
* It does do some basic checks for HT40 but I haven't yet flipped on
HT40 support;
* It enables software A-MSDU transmit; I honestly don't want to make
A-MPDU TX work and there are apparently issues with QoS and A-MPDU TX.
So I totally am ignoring A-MPDU TX;
* MCS rate transmit is fine.
I haven't:
* A-MPDU TX, as I said above;
* made radiotap work fully;
* HT40;
* short-GI support;
* lots of other stuff that honestly no-one is likely to use.
But! Hey, this is another ye olde 11n USB NIC that now works pretty OK
in 11n rates. A-MPDU receive seems fine enough given it's a draft-n
device from before 2010.
Tested:
* Ye olde UB82 Test NIC (AR9170 + AR9104) - 2GHz/5GHz
As with the previous import, only the MdePkg subdirectory has been
brought in. The line-endings were also converted using:
% find . -type f | xargs -n 1 sed -I.BAK -e `printf "s/\r//g"`
% find . -name \*.BAK | xargs rm
The filename is nearly always wrong since it's /boot/lua/loader.lua, which
is not useful for diagnostics. The actual errmsg will include a lua filename
if this is relevant.
Dropping "LUA" while we're here because that's almost universally
irrelevant to whatever error follows, unless the error states that it's
actually a lua problem.
Both of these are minor nits that just detract from identifying the
pertinent information.
MFC after: 3 days
This change prevents a race that happens when rxsync dequeues
N-1 rx packets (with N being the size of the netmap rx ring).
In this situation, the loop exits without re-enabling the
rx interrupts, thus causing the VQ to stall.
MFC after: 1 week
The new index tracks the next netmap slot that is going
to be enqueued into the virtqueue. The index is necessary
to prevent the receive VQ and the netmap rx ring from going
out of sync, considering that we never enqueue N slots, but
at most N-1. This change fixes a bug that causes the VQ
and the netmap ring to go out of sync after N-1 packets
have been received.
MFC after: 1 week
The u-boot EFI implementation of the ReadBlocks and WriteBlocks methods
requires that the provided buffer meet the IO alignment requirements of
the underlying disk. Unlike loader.efi, gptboot.efi doesn't check this
requirement, and therefore fails to perform a successful read. Adjust
secbuf's alignment to 4K in hopes that we will always meet this
requirement.
Reviewed by: imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25111
connected to or sent to. This was fond when working with Michael
Tuexen and Skyzaller. Skyzaller seems to want to use either of
these two addresses to connect to at times. And it really is
an error to do so, so lets not allow that behavior.
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D24852
of them have to do with TFO. Even the default stack
had one of the issues:
1) We need to make sure for rack that we don't advance
snd_nxt beyond iss when we are not doing fast open. We
otherwise can get a bunch of SYN's sent out incorrectly
with the seq number advancing.
2) When we complete the 3-way handshake we should not ever
append to reassembly if the tlen is 0, if TFO is enabled
prior to this fix we could still call the reasemmbly. Note
this effects all three stacks.
3) Rack like its cousin BBR should track if a SYN is on a
send map entry.
4) Both bbr and rack need to only consider len incremented on a SYN
if the starting seq is iss, otherwise we don't increment len which
may mean we return without adding a sendmap entry.
This work was done in collaberation with Michael Tuexen, thanks for
all the testing!
Sponsored by: Netflix Inc
Differential Revision: https://reviews.freebsd.org/D25000
Enabling TCP-FASTOPEN on an end-point which is in a state other than
CLOSED or LISTEN, is a bug in the application. So it should not work.
Also the TCP code does not (and needs not to) handle this.
While there, also simplify the setting of the TF_FASTOPEN flag.
This issue was found by running syzkaller.
Reviewed by: rrs
MFC after: 1 week
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D25115
After r339550 tunneling interfaces have started handle appearing and
disappearing of ingress IP address on the host system.
When such interfaces are moving into VNET jail, they lose ability to
properly handle ifaddr_event_ext event. And this leads to need to
reconfigure tunnel to make it working again.
Since moving an interface into VNET jail leads to removing of all IP
addresses, it looks consistent, that tunnel configuration should also
be cleared. This is what will do if_reassing method.
Reported by: John W. O'Brien <john saltant com>
MFC after: 1 week
On 64-bit platforms, the two short fields in `struct tmpfs_fid` are padded to
the 64-bit alignment of the long field. This pushes the offsets of the
subsequent fields by 4 bytes and makes `struct tmpfs_fid` bigger than
`struct fid`. `tmpfs_vptofh()` casts a `struct fid *` to `struct tmpfs_fid *`,
causing 4 bytes of adjacent memory to be overwritten when the struct fields are
set. Through several layers of indirection and embedded structs, the adjacent
memory for one particular call to `tmpfs_vptofh()` happens to be the stack
canary for `nfsrvd_compound()`. Half of the canary ends up being clobbered,
going unnoticed until eventually the stack check fails when `nfsrvd_compound()`
returns and a panic is triggered.
Instead of duplicating fields of `struct fid` in `struct tmpfs_fid`, narrow the
struct to cover only the unique fields for tmpfs and assert at compile time
that the struct fits in the allotted space. This way we don't have to
replicate the offsets of `struct fid` fields, we just use them directly.
Reviewed by: kib, mav, rmacklem
Approved by: mav (mentor)
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D25077
The netmap_rx_irq() function normally wakes up user-space threads
waiting for more packets. In this case, it is not necessary to
call it under the driver queue lock. However, if the interface is
attached to a VALE switch, netmap_rx_irq() ends up calling rxsync
on the interface (see netmap_bwrap_intr_notify()). Although
concurrent rxsyncs are serialized through the kring lock
(see nm_kr_tryget()), the lock acquire operation is not blocking.
As a result, it may happen that netmap_rx_irq() is called on
an RX ring while another instance is running, causing the
second call to fail, and received packets stall in the receive VQ.
We fix this issue by calling netmap_irx_irq() under the VQ lock.
MFC after: 1 week
The netmap_rx_irq() function may return NM_IRQ_RESCHED to inform the
driver that more work is pending, and that netmap expects netmap_rx_irq()
to be called again as soon as possible.
This change implements this behaviour in the vtnet driver.
MFC after: 1 week
When I did some bus_dma cleanup in r320528, I brought forward some sketchy
WITNESS checks from the prior x86 busdma wrappers, instead of recognizing
them as technical debt and just dropping them. Two of these were removed in
r346351 and r346851, but one remains in bounce_bus_dmamem_alloc(). This check
could be constrained to only apply in the BUS_DMA_NOWAIT case, but it's cleaner
to simply remove it and rely on the checks already present in the sleepable
allocation paths used by this function.
While here, remove another unnecessary witness check in bus_dma_tag_create
(the tag is always allocated with M_NOWAIT), and fix a couple of typos.
Reported by: cem
Reviewed by: kib, cem
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25107
