* If the first call succeeded but failed to transmit, a timer would
reschedule it via bar_timeout(). Unfortunately bar_timeout() didn't
check the return value from the ieee80211_send_bar() reattempt and
if that failed (eg the driver ic_raw_xmit() failed), it would never
re-arm the timer.
* If BARPEND is cleared (which ieee80211_send_bar() will do if it can't
TX), then re-arming the timer isn't enough - once bar_timeout() occurs,
it'll see BARPEND is 0 and not run through the rest of the routine.
So when rearming the timer, also set that flag.
* If the TX wasn't occuring, bar_tx_complete() wouldn't be called and the
driver callback wouldn't be called either. So the driver had no idea
that the BAR TX attempt had failed. In the ath(4) case, TX would stay
paused.
(There's no callback to indicate that BAR TX had failed or not;
only a "BAR TX was attempted". That's a separate, later problem.)
So call the driver callback (ic_bar_response()) before the ADDBA session
is torn down, so it has a chance of being notified that things didn't
quite go to plan.
I've verified that yes, this does suspend traffic for ath(4), retry BAR
TX even if the driver is failing ic_raw_xmit(), and then eventually giving
up and sending a DELBA. I'll address the "out of ath_buf" issue in ath(4)
in a subsequent commit - this commit just fixes the edge case where any
driver is (way) out of internal buffers/descriptors and fails frame TX.
PR: kern/168170
Reviewed by: bschmidt
MFC after: 1 month
works with new generations of GPUs (IronLake, SandyBridge and
supposedly IvyBridge).
The driver is not connected to the build yet.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
operations required by GEMified i915.ko. It also attaches to SandyBridge
and IvyBridge CPU northbridges now.
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
vn_rlimit_fsize takes uio->uio_offset and uio->uio_resid into account
when determining whether given write would exceed RLIMIT_FSIZE.
When APPEND flag is specified, ZFS updates uio->uio_offset to point to the
end of file.
But this happens after a call to vn_rlimit_fsize, so vn_rlimit_fsize check
can be rendered ineffective by thread that opens some file with O_APPEND
and lseeks below RLIMIT_FSIZE before calling write.
Submitted by: Mateusz Guzik <mjguzik at gmail dot com>
MFC after: 2 weeks
into partitions.
Partitions are created based on data in dts file which are
extracted and interpreted by slicer.
Obtained from: Semihalf
Supported by: FreeBSD Foundation, Juniper Networks
this is a VNET-kernel or not. gcc used to put the static symbol into
the symbol table, clang does not. This fixes the 'netstat: no namelist'
error seen on clang+VNET systems.
In PHYS_TO_VM_PAGE() when VM_PHYSSEG_DENSE is set the check if we are past
the end of vm_page_array was incorrect causing it to return NULL. This
value is then used in vm_phys_add_page causing a data abort.
Reviewed by: alc, kib, imp
Tested by: stas
I've come across a weird scenario in net80211 where two TX streams will
happily attempt to setup an aggregation session together.
If we're very lucky, it happens concurrently on separate CPUs and the
total lack of locking in the net80211 aggregation code causes this stuff
to race. Badly.
So >1 call would occur to the ath(4) addba start, but only one call would
complete to addba complete or timeout. The TID would thus stay paused.
The real fix is to implement some proper per-node (or maybe per-TID)
locking in net80211, which then could be leveraged by the ath(4) TX
aggregation code.
Whilst I'm at it, shuffle around the debugging messages a bit.
I like to keep people on their toes.
queued internally. This works around issue in the isci HAL where it cannot
accept new I/O to a device after a resetting->ready state transition until
the completion context has unwound.
This issue was found by submitting non-tagged CCBs through pass(4) interface
to a SATA disk with an extremely small timeout value (5ms). This would trigger
internal resets with I/O in the isci(4) internal queues.
The small timeout value had not been intentional (and original reporter has
since changed his test to use 5sec instead), but it did uncover this corner
case that would result in a hung disk.
Sponsored by: Intel
Reported and tested by: Ravi Pokala <rpokala at panasas dot com>
Reviewed by: scottl (earlier version)
MFC after: 1 week
Eliminate bpf_buffer_alloc() and allocate BPF buffers on descriptor creation and BIOCSBLEN ioctl.
This permits us not to allocate buffers inside bpf_attachd() which is protected by global lock.
Approved by: kib(mentor)
MFC in: 4 weeks
'flags' field is added to the end of bpf_if structure. Currently the only
flag is BPFIF_FLAG_DYING which is set on bpf detach and checked by bpf_attachd()
Problem can be easily triggered on SMP stable/[89] by the following command (sort of):
'while true; do ifconfig vlan222 create vlan 222 vlandev em0 up ; tcpdump -pi vlan222 & ; ifconfig vlan222 destroy ; done'
Fix possible use-after-free when BPF detaches itself from interface, freeing bpf_bif memory,
while interface is still UP and there can be routes via this interface.
Freeing is now delayed till ifnet_departure_event is received via eventhandler(9) api.
Convert bpfd rwlock back to mutex due lack of performance gain (currently checking if packet
matches filter is done without holding bpfd lock and we have to acquire write lock if packet matches)
Approved by: kib(mentor)
MFC in: 4 weeks
Fix panic on tcpdump being attached to interface being removed (introduced by r233937, pointed by hrs@ and adrian@)
Protect most of bpf_setf() by BPF global lock
Add several forgotten assertions (thanks to adrian@)
Document current locking model inside bpf.c
Document EVENTHANDLER(9) usage inside BPF.
Approved by: kib(mentor)
Tested by: gnn
MFC in: 4 weeks
frequency in the at91_pmc_clock_init rather than passing it in. Allow
for frequencies >= 21MHz by rounding to the nearest 500Hz (Idea from
Ian Lapore whose company uses a similar arrangement in their product).
at91_pmc_clock_init() is now nearly independent of the rest of the pmc
driver (which means we may be able to call it much earlier in boot
soon to eliminate the master clock config file requirement for printf
to work during early boot and also eliminate some interdependencies
with the device ordering which requires pmc to be the first device
added).
to this pmap.c. This new r/w lock is used primarily to synchronize access
to the PV lists. However, it will be used in a somewhat unconventional
way. As finer-grained PV list locking is added to each of the pmap
functions that acquire this r/w lock, its acquisition will be changed from
write to read, enabling concurrent execution of the pmap functions with
finer-grained locking.
Reviewed by: kib
X-MFC after: r235598
The generic ELF loading code maps the kernel into low memory
by subtracting KERN_BASE. So the copyin/copyout/readin functions
are always called with low addresses. This code finds the largest
DRAM block from the U-Boot memory map and adds that base to
the addresses.
In particular, this fixes ubldr on AM3358, which has DRAM
mapped to 0x80000000 at power-on.
disabled or the system is in shutdown procedure.
This should fix the problem which kernel never response to the sleep
button press events after the message `suspend request ignored (not
ready yet)'.
MFC after: 3 days
range operations like pmap_remove() and pmap_protect() as well as allowing
simple operations like pmap_extract() not to involve any global state.
This substantially reduces lock coverages for the global table lock and
improves concurrency.
casted to structs by getting rid of these buffers entirely. In r169832, it
was tried to paper over this issue by 32-bit aligning the buffers. Depending
on compiler optimizations that still was insufficient for 64-bit architectures
with strong alignment requirements though.
While at it, add comments regarding the total lack of locking in this area.
Tested by: bz
Reviewed by: bz (slightly earlier version), yongari (earlier version)
MFC after: 1 week
There's some TX path TDMA code in if_ath_tx.c which should be migrated
out, but first I should likely try and verify/fix/repair the TDMA support
in 9.x and -HEAD.
* migrate the rx processing out into if_ath_rx.c
* migrate the TSF functions into if_ath_tsf.h, as inlines
This is in prepration for supporting the EDMA RX routines, required to
support the AR93xx series NICs.
TODO:
* ath_start() shouldn't be private, but it's called as part of
the RX path. I should likely migrate ath_rx_tasklet() back into
if_ath.c and then return this to be 'static'. The RX code really
shouldn't need to see TX routines (and vice versa.)
* ath_beacon_* should be in if_ath_beacon.[ch].
* ath_tdma_* should be in if_ath_tdma.[ch] ...
The configuration is:
* RGMII, both ports
* arge0 - connected to PHY4 as a dedicated port (CPU port)
* arge1 - connected to the switch ports
I've verified this on my routerstation pro board.
Most part is merged from amd64.
- i386/acpica/acpi_wakecode.S
Replaced with amd64 code (from realmode to paging enabling code).
- i386/acpica/acpi_wakeup.c
Replaced with amd64 code (except for wakeup_pagetables stuff).
- i386/include/pcb.h
- i386/i386/genassym.c
Added PCB new members (CR0, CR2, CR4, DS, ED, FS, SS, GDT, IDT, LDT
and TR) needed for suspend/resume, not for context switch.
- i386/i386/swtch.s
Added suspendctx() and resumectx().
Note that savectx() was not changed and used for suspending (while
amd64 code uses it).
BSP and AP execute the same sequence, suspendctx(), acpi_wakecode()
and resumectx() for suspend/resume (in case of UP system also).
- i386/i386/apic_vector.s
Added cpususpend().
- i386/i386/mp_machdep.c
- i386/include/smp.h
Added cpususpend_handler().
- i386/include/apicvar.h
- kern/subr_smp.c
- sys/smp.h
Added IPI_SUSPEND and suspend_cpus().
- i386/i386/initcpu.c
- i386/i386/machdep.c
- i386/include/md_var.h
- pc98/pc98/machdep.c
Moved initializecpu() declarations to md_var.h.
MFC after: 3 days
vm_pager_object_lookup() already referenced the object.
Note that there is no in-tree consumers of cdev_pager_lookup(). The
only known user of the function is i915 gem driver, which is not yet
imported. This should make the KPI change minor.
Submitted by: avg
MFC after: 1 week
longer uses the active and inactive paging queues. Instead, the pmap now
maintains an LRU-ordered list of pv entry pages, and pmap_pv_reclaim() uses
this list to select pv entries for reclamation.
Note: The old pmap_collect() tried to avoid reclaiming mappings for pages
that have either a hold_count or a busy field that is non-zero. However,
this isn't necessary for correctness, and the locking in pmap_collect() was
insufficient to guarantee that such mappings weren't reclaimed. The new
pmap_pv_reclaim() doesn't even try.
Reviewed by: kib
MFC after: 6 weeks
to freebsd-fs@, where the setfacl of an NFSv4 acl would fail.
This was caused by the VOP_ACLCHECK() call for ZFS replying
EOPNOTSUPP. After discussion with rwatson@, it was determined
that a call to VOP_ACLCHECK() before doing VOP_SETACL() is not
required. This patch fixes the problem by deleting the
VOP_ACLCHECK() call.
Tested by: Andrew Leonard (previous version)
MFC after: 1 week
Supermicro LCD screen modules seem to not support accessing reports through
the control pipes, but working fine with the interrupt pipes.
Sponsored by: iXsystems, Inc.
MFC after: 1 week
The NAND Flash environment consists of several distinct components:
- NAND framework (drivers harness for NAND controllers and NAND chips)
- NAND simulator (NANDsim)
- NAND file system (NAND FS)
- Companion tools and utilities
- Documentation (manual pages)
This work is still experimental. Please use with caution.
Obtained from: Semihalf
Supported by: FreeBSD Foundation, Juniper Networks
The code previously assumed that copyin/copyout did no
address translation and that the device tree blob could
be manipulated in-place (with only a few adjustments for
the ELF loader offset). This isn't possible on all platforms,
so the revised code uses copyout() to copy the device tree
blob into a heap-allocated buffer and then updates the
device tree with copyout(). This isn't ideal, since it
bloats the loader memory usage, but seems the only feasible
approach (short of rewriting all of the fdt manipulation
routines).
8.x code:
- If the lock cannot be acquired immediately unlocks 'bar' vnode
and then locks both vnodes in order.
- wrong vnode type panics from cache_enter_time after calls by
ext2_lookup.
The fix merges the fixes from ufs/ufs_lookup.c.
Submitted by: Mateusz Guzik
Approved by: jhb@ (mentor)
Reviewed by: kib@
MFC after: 1 week
Entries with zero inode number are considered placeholders by libc and
UFS. Fix remaining uses of VOP_READDIR in kernel: vop_stdvptocnp,
unionfs.
Sponsored by: Google Summer of Code 2011
add some more BAR debugging logic.
* Change the definition of ath_debug and ath_softc.sc_debug from
int to uint64_t;
* Change the relevant sysctls;
* Add a new BAR TX debugging field;
* Use this in if_ath_tx.
This has been tested by using the sysctl program, which happily allows
for fields > 32 bits to be configured.
Although I _should_ handle the other errors in various ways (specifically
errors like FILT), treating them as having transmitted successfully
is completely wrong. Here, they'd be counted as successful and the BAW
would be advanced.. but the RX side wouldn't have received them.
The specific errors I've been seeing here are HAL_TXERR_FILT.
This patch does fix the issue - I've tested it using -i 0.001 pings
(enough to start aggregation) and now the behaviour is correct:
* The RX side never sees a "moved window" error, and
* The TX side sends BARs as needed, with the RX side correctly handling
them.
PR: kern/167902
compatible with the sched provider implemented by Solaris and its open-
source derivatives. Full documentation of the sched provider can be found
on Oracle's DTrace wiki pages.
Note that for compatibility with scripts originally written for Solaris,
serveral probes are defined that will never fire. These probes are defined
to fire when Solaris-specific features perform certain actions. As these
features are not present in FreeBSD, the probes can never fire.
Also, I have added a two probes that are not defined in Solaris, lend-pri
and load-change. These probes have been added to make it possible to
collect schedgraph data with DTrace.
Finally, a few probes are defined in Solaris to take a cpuinfo_t *
argument. As it was not immediately clear to me how to translate that to
FreeBSD, currently those probes are passed NULL in place of a cpuinfo_t *.
Sponsored by: Sandvine Incorporated
MFC after: 2 weeks
used, when the code should actually protect the tested
variable with a mutex. Since the tsleep()s had a 10sec
timeout, the race would have only delayed the allocation
of a new clientid for a client. The sleeps will also
rarely occur, since having a callback in progress when
a client acquires a new clientid, is unlikely.
in practice, since having a callback in progress when
a fresh clientid is being acquired by a client is unlikely.
MFC after: 1 month
