simplify it a bit, and make use of that method to determine if an
interface is a candidate for IPv6 rtsol rather than listing all of the
possible wireless interfaces that should _not_ get rtsol'ed.
This change is only relevant for 8.0+ unless the "wlan mandatory" code
gets ported back to RELENG_7.
top of ZVOLs. The problem is that rc.d/fsck runs before rc.d/zfs. The
latter makes ZVOLs to appear in /dev/. In such case rc.d/fsck cannot
find devfs entry and aborts. We cannot simply move rc.d/zfs before
rc.d/fsck, because we first want kern.hostid to be configured (by
rc.d/hostid). If we won't wait (hostid will be 0) we can reuse disks
which are in use by different systems (eg. in SAN/NAS environment).
We also cannot move rc.d/hostid before rc.d/fsck, because rc.d/hostid on
first system start stores generated kern.hostuuid in /etc/hostid file,
so it needs root file system to be mounted read-write.
The fix is to split rc.d/hostid so that rc.d/hostid (which will now run
before rc.d/fsck) only generates hostid and sets up sysctls, but doesn't
touch root file system and rc.d/hostid_save (which is run after
rc.d/root) and only creates /etc/hostid file.
With that in place, we can move ZVOL initialization to dedicated
rc.d/zvol script which runs before rc.d/fsck.
PR: conf/120194
Reported by: James Snow <snow@teardrop.org>
Reviewed by: brooks
Approved by: re (kib)
MFC after: 2 weeks
allow them to start after netif. There were too many problems reported
with this change in the short period of time that it lived in HEAD, and
we are too late in the release cycle to properly shake it out.
IMO the issue of having the firewalls up before the network is still a
valid concern, particularly for pf whose default state is wide open.
However properly solving this issue is going to take some investment
on the part of the people who actually use those tools.
This is not a strict reversion of all the changes for r193198 since it
also included some simplification of the BEFORE/REQUIRE logic which is
still valid for ipfilter and ip6fw.
- Remove redundant debugging of consolelog.
- Use `while :', instead of `while [ true ]'. This is done in other
places as well.
Submitted by: Jille Timmermans <jille quis cx> (not jilles)
Reviewed by: jilles
/etc/rc.d. They use the following new rc variables:
nfsv4_server_enable - set to "YES" to run the experimental server
nfsuserd_enable - set to "YES" to run nfsuserd for NFSv4 client and
server
nfsuserd_flags - command line flags for nfsuserd
nfscbd_enable - set to "YES" to run the experimental nfs client's
NFSv4 callback daemon
nfscbd_flags - command line flags for nfscbd
Reviewed by: dougb
Approved by: kib (mentor)
happen right after ypbind, and before anything that uses NIS. The only
change in rcorder accomplished by this patch is make that happen.
PR: conf/117555
Submitted by: John Marshall <john@rwsrv05.mby.riverwillow.net.au>
(localhost by default) can be successfully looked up. Off by default.
2. New feature: option to create a forwarder configuration file based on
the contents of /etc/resolv.conf. This allows you to utilize a local
resolver for better performance, less network traffic, custom zones, etc.
while still relying on the benefits of your local network resolver.
Off by default.
3. Add named-checkconf into the startup routine. This will prevent named
from trying to start in a situation where it would not be possible to do
so.
arbitrary commands (outside the jail) associated with said events,
e.g. to bring up/down CARP interfaces representing services run in
jails.
Reviewed by: simon
is set and "natd_enable" is NOT set;
- Accept and pass firewall type to the external firewall script.
Submitted by: Yuri Kurenkov < y -dot- kurenkov -at- init -dot- ru >
MFC after: 3 days
No response from: freebsd-rc
the jail case specifically. In case we find a proper pre-seeded
devfs in the chroot path (mounted from the base system) permit
starting chrooted else give proper warn/error messages.
PR: conf/103489
Reviewed by: dougb
MFC after: 5 days
time to boot an unplugged system 30 sec. longer for no good reason. Therefore,
add a check to make sure that any DHCP interfaces are plugged in before
waiting.
the -g and -q options. They do a slightly different thing and
both are necessary when the time difference is large.
Noticed by: danger, in the forums
Approved by: roberto
MFC after: 1 week
Note: this is only really necessary because of the ifconfig
logic to add/remove the jail IPs upon start/stop.
Consensus among simon and I is that the logic should
really be factored out from the startup script and put
into a proper management solution.
- We now support starting of no-IP jails.
- Remove the global jail_<jname>_netmask option as it is only
helpful to set netmasks/prefixes for the right address
family and per address.
- Implement jail_<jname>_ip options to support both
address familes with regard to ifconfig logic.
- Implement _multi<n> support suffix to the jail_<jname>_ip
option to configure additional addresses to avoid overlong,
unreadbale jail_<jname>_ip lines with lots of addresses.
Submitted by: initial work from Ruben van Staveren
Discussed on: freebsd-jail in Nov 2008.
Reviewed by: simon, ru (partial, older version)
MFC after: 1 week
newline when it fails to obtain an address via DHCP. This made the next
rc script begin its output on the same line.
PR: conf
Submitted by: Bruce Cran <bruce at cran dot org dot uk>
MFC after: 3 days
and server. This replaces the RPC implementation of the NFS client and
server with the newer RPC implementation originally developed
(actually ported from the userland sunrpc code) to support the NFS
Lock Manager. I have tested this code extensively and I believe it is
stable and that performance is at least equal to the legacy RPC
implementation.
The NFS code currently contains support for both the new RPC
implementation and the older legacy implementation inherited from the
original NFS codebase. The default is to use the new implementation -
add the NFS_LEGACYRPC option to fall back to the old code. When I
merge this support back to RELENG_7, I will probably change this so
that users have to 'opt in' to get the new code.
To use RPCSEC_GSS on either client or server, you must build a kernel
which includes the KGSSAPI option and the crypto device. On the
userland side, you must build at least a new libc, mountd, mount_nfs
and gssd. You must install new versions of /etc/rc.d/gssd and
/etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf.
As long as gssd is running, you should be able to mount an NFS
filesystem from a server that requires RPCSEC_GSS authentication. The
mount itself can happen without any kerberos credentials but all
access to the filesystem will be denied unless the accessing user has
a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There
is currently no support for situations where the ticket file is in a
different place, such as when the user logged in via SSH and has
delegated credentials from that login. This restriction is also
present in Solaris and Linux. In theory, we could improve this in
future, possibly using Brooks Davis' implementation of variant
symlinks.
Supporting RPCSEC_GSS on a server is nearly as simple. You must create
service creds for the server in the form 'nfs/<fqdn>@<REALM>' and
install them in /etc/krb5.keytab. The standard heimdal utility ktutil
makes this fairly easy. After the service creds have been created, you
can add a '-sec=krb5' option to /etc/exports and restart both mountd
and nfsd.
The only other difference an administrator should notice is that nfsd
doesn't fork to create service threads any more. In normal operation,
there will be two nfsd processes, one in userland waiting for TCP
connections and one in the kernel handling requests. The latter
process will create as many kthreads as required - these should be
visible via 'top -H'. The code has some support for varying the number
of service threads according to load but initially at least, nfsd uses
a fixed number of threads according to the value supplied to its '-n'
option.
Sponsored by: Isilon Systems
MFC after: 1 month
to allow them to do a "clean" shutdown.
I purposely avoided making changes to network-related stuff since the
system shutting down is pretty conclusive, and there may be complicated
dependencies on the network that I would rather not try to unravel.
I also skipped kerberos-related stuff for the reasons above, and
because I have no way to test it.
