Unconditionally install bsdgrep as grep, bootstrap or not. Remove all
build glue and stop installing both gnugrep and libgnuregex now that
all consumers of the latter are gone.
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D27732
In order to efficiently serve web traffic on a NUMA
machine, one must avoid as many NUMA domain crossings as
possible. With SO_REUSEPORT_LB, a number of workers can share a
listen socket. However, even if a worker sets affinity to a core
or set of cores on a NUMA domain, it will receive connections
associated with all NUMA domains in the system. This will lead to
cross-domain traffic when the server writes to the socket or
calls sendfile(), and memory is allocated on the server's local
NUMA node, but transmitted on the NUMA node associated with the
TCP connection. Similarly, when the server reads from the socket,
he will likely be reading memory allocated on the NUMA domain
associated with the TCP connection.
This change provides a new socket ioctl, TCP_REUSPORT_LB_NUMA. A
server can now tell the kernel to filter traffic so that only
incoming connections associated with the desired NUMA domain are
given to the server. (Of course, in the case where there are no
servers sharing the listen socket on some domain, then as a
fallback, traffic will be hashed as normal to all servers sharing
the listen socket regardless of domain). This allows a server to
deal only with traffic that is local to its NUMA domain, and
avoids cross-domain traffic in most cases.
This patch, and a corresponding small patch to nginx to use
TCP_REUSPORT_LB_NUMA allows us to serve 190Gb/s of kTLS encrypted
https media content from dual-socket Xeons with only 13% (as
measured by pcm.x) cross domain traffic on the memory controller.
Reviewed by: jhb, bz (earlier version), bcr (man page)
Tested by: gonzo
Sponsored by: Netfix
Differential Revision: https://reviews.freebsd.org/D21636
- skipping paragraph macro: Pp before Bl
- skipping paragraph macro: Pp after Ss
- skipping paragraph macro: Pp at the end of Ss
- unusual Xr punctuation: none before bhnd_driver_get_erom_class(9)
- unusual Xr punctuation: none before bus_space(9)
MFC after: 1 week
- skipping paragraph macro: Pp before Bl
- skipping paragraph macro: Pp at the end of Ss
- missing section argument: Xr device_set_desc
- unusual Xr punctuation: none before bhnd_erom(9)
MFC after: 1 week
- function name without markup: g_io_deliver()
- function name without markup: disk_gone()
- sections out of conventional order: Sh SEE ALSO
- referenced manual not found: Xr MAKE_DEV 9
Actually the man page of MAKE_DEV has never existed.
MFC after: 3 days
The argument is a void * so there's no need to cast it to caddr_t.
Update documentation to match function decleration.
Reviewed by: freqlabs
Obtained from: CheriBSD
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D27093
nids(4) was a clever idea in the early 2000's when the market was
flooded with 10/100 NICs with Windows-only drivers, but that hasn't been
the case for ages and the driver has had no meaningful maintenance in
ages. It only supports Windows-XP era drivers.
Reviewed by: imp, bcr
MFC after: 3 days
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D27527
The hme (Happy Meal Ethernet) driver was the onboard NIC in most
supported sparc64 platforms. A few PCI NICs do exist, but we have seen
no evidence of use on non-sparc systems.
Reviewed by: imp, emaste, bcr
Sponsored by: DARPA
Macfilter to route packets through different hooks based on sender MAC address.
Based on ng_macfilter written by Pekka Nikander
Sponsered by Retina b.v.
Reviewed by: afedorov
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D27268
As discussed on -current, -stable, -toolchain, and with jhb@ and imp@,
disable the obsolete in-tree GDB 6.1.1 by default. This was kept only
to provide kgdb for the crashinfo tool, but is long-obsolete, does not
support all architectures that FreeBSD does, and held back other work
(such as forcing the use of DWARF2 for kernel debug).
Crashinfo will use kgdb from the gdb package or devel/gdb port, and will
privde a message referencing those if no kgdb is found.
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
This has been years in the making, and we all knew it was bound to happen
some day. Switch to the BSDL grep implementation now that it's been a
little more thoroughly tested and theoretically supports all of the
extensions that gnugrep in base had with our libregex(3).
Folks shouldn't really notice much from this update; bsdgrep is slower than
gnugrep, but this is currently the price to pay for fewer bugs. Those
dissatisfied with the speed of grep and in need of a faster implementation
should check out what textproc/ripgrep and textproc/the_silver_searcher
can do for them.
I have some WIP to make bsdgrep faster, but do not consider it a blocker
when compared to the pros of switching now (aforementioned bugs, licensing).
PR: 228798 (exp-run)
PR: 128645, 156704, 166842, 166862, 180937, 193835, 201650
PR: 232565, 242308, 246000, 251081, 191086, 194397
Relnotes: yes, please
Sync serial (T1/E1) interfaces are largely irrelevant today and phk
confirms this driver is unnecessary in review D23928.
This leaves ce(4) and cp(4) in the tree. They're likely not relevant
either, but glebius contacted the manufacturer and those devices are
still available for purchase. At glebius' suggestion leave them in
the tree as long as they do not impose a maintenace burden.
Approved by: phk
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
This was introduced and then disabled by default primarily to avoid dealing
with bugs in libgnuregex. rS363823 switched to using libregex for it, so
let's just rip the option out now so we can make sure we're getting tested
with libregex via bsdgrep.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D27476
Enable in-kernel acceleration of SHA1 and SHA2 operations on arm64 by adding
support for the ossl(4) crypto driver. This uses OpenSSL's assembly routines
under the hood, which will detect and use SHA intrinsics if they are
supported by the CPU.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27390
We are seeing regular build failures due to libc.so being installed again and
another parallel make job tries to read the partially written libc.so at the
same time. When building with -j32 or higher this almost always happens on
the first clean build (subsequent incremental builds always work fine).
Using -S should "fix" the "section header table goes past the end of the
file: e_shoff = 0x..." errors that have started to plague our builds.
We originally thought this only affected CheriBSD, but I just got the same
error while building the latest upstream FreeBSD.
The real fix should be to not install libraries twice, but until then this
workaround is needed.
Original patch by jrtc27@, I only made some minor changes to the comment.
Obtained from: CheriBSD (49837edd3e)
Reviewed By: markj, bdrewery
Differential Revision: https://reviews.freebsd.org/D27102
This subsumes some of the content from tcp(4) describing the socket
options but also adds additional notes.
Reviewed by: gallatin, hselasky
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D27272
Crypto file descriptors were added in the original OCF import as a way
to provide per-open data (specifically the list of symmetric
sessions). However, this gives a bit of a confusing API where one has
to open /dev/crypto and then invoke an ioctl to obtain a second file
descriptor. This also does not match the API used with /dev/crypto on
other BSDs or with Linux's /dev/crypto driver.
Character devices have gained support for per-open data via cdevpriv
since OCF was imported, so use cdevpriv to simplify the userland API
by permitting ioctls directly on /dev/crypto descriptors.
To provide backwards compatibility, CRIOGET now opens another
/dev/crypto descriptor via kern_openat() rather than dup'ing the
existing file descriptor. This preserves prior semantics in case
CRIOGET is invoked multiple times on a single file descriptor.
Reviewed by: markj
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D27302
This driver provides support for Realtek PCI SD card readers. It attaches
mmc(4) bus on card insertion and detaches it on card removal. It has been
tested with RTS5209, RTS5227, RTS5229, RTS522A, RTS525A and RTL8411B. It
should also work with RTS5249, RTL8402 and RTL8411.
PR: 204521
Submitted by: Henri Hennebert (hlh at restart dot be)
Reviewed by: imp, jkim
Differential Revision: https://reviews.freebsd.org/D26435
This removes 288KB (36%) of the driver code and zillions of hacks and
workarounds, making single driver uniformly support several different
generations of hardware interfaces, not counting minor card variations.
After years of the hopeless fight, I don't think it worth to continue
support for hardware obsolete for 15-20 years. Instead much cleaner
now code should allow to move forward toward better locking, multiple
queues and other cool features.
All the remaining Qlogic cards starting from 4Gb 24xx to 32Gb 27xx use
the same hardware/firmware interface with minor incremental improvements,
so it seems to be a good new starting point. Except one PCI-X model all
all of them are PCIe and so still usable in modern systems.
Discussed with: ken, scottl, jpaetzel, imp
Relnotes: yes
There are many cases where one would choose avoid entering the debugger
on a normal panic, opting instead to reboot and possibly save a kernel
dump. However, recursive kernel panics are an unusual case that might
warrant attention from a human, so provide a secondary tunable,
debug.debugger_on_recursive_panic, to allow entering the debugger only
when this occurs.
For for simplicity in maintaining existing behaviour, the tunable
defaults to zero.
Reviewed by: cem, markj
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D27271
First stab at documenting the different disk ioctl commands defined in
sys/disk.h.
Reviewed by: phk (prior version)
Differential Revision: https://reviews.freebsd.org/D26994
Section 7 of the manual pages contain lots of very useful information, but
finding the pages is not always obvious - to assist people in finding the
information, add missing cross-references.
Reviewed by: 0mp (mentor), mhorne, yuripv
Approved by: 0mp (mentor
Differential Revision: https://reviews.freebsd.org/D27284
Refering to guide: https://wiki.freebsd.org/SPDX the SPDX tag should not
replace the standard license text, however it should be added over the
standard license text to make the automation easier.
Because of that, the old license was kept, but the SPDX tag was added
on top of every ENA driver file.
Submited by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D27117
As this ABI is still fresh (r367287), let's correct some mistakes now:
- Version the structure to allow for future changes
- Include sender's pid in control message structure
- Use a distinct control message type from the cmsgcred / sockcred mess
Discussed with: kib, markj, trasz
Differential Revision: https://reviews.freebsd.org/D27084
Check for the variable SUBDIR. and error as it usually means someone
forgot to include src.opts.mk.
This guard from CheriBSD found the bugs in r367655 and r367728.
Reviewed by: bdrewery, arichardson
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D27211
WITH_INIT_ALL_ZERO and WITH_INIT_ALL_PATTERN are mutually exclusive.
The .error when they were both set broke makeman so demote it to a
warning (and presumably the compiler will fail on an error later on).
We could improve this to make one take precedence but this is sufficient
for now.
MFC with: r367577
Sponsored by: The FreeBSD Foundation
I've not removed the Er macro from one of the lists in example.9, however,
because it seems to be doing some special kind of magic. Let's leave it
there for now.
There are two options:
- WITH_INIT_ALL_ZERO: Zero all variables on the stack.
- WITH_INIT_ALL_PATTERN: Initialize variables with well-defined patterns.
The exact pattern are a compiler implementation detail and vary by type.
They are somewhat documented in the LLVM commit message:
https://reviews.llvm.org/rL349442
I've used WITH_INIT_ALL_* to match Microsoft's InitAll feature rather
than naming them after the LLVM specific compiler flags.
In a range of consumer products, options like these are used in
both debug and production builds with debugs builds using patterns
(intended to provoke crashes on use of uninitialized values) and
production using zeros (deemed more likely to lead to harmless
misbehavior or NULL-pointer dereferences).
Reviewed by: emaste
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D27131
Perhaps it made sense in 1998 (r32836), but now it feels a bit out of
place. We tend to avoid documenting non-essential ports variables in
the manual page (we try to document them in the Porter's Handbook instead).
MFC after: 1 week
- map those IPv4 / IPv6 socket options which exist in FreeBSD
+ most of them visually verified to have the same type/layout of arguments
+ not tested with linux programs to behave as intended
- be more human readable for known options which are not handled
- be more verbose for unhandled socket message flags we know about
- print the jail ID in linux_msg if run in a jail
- add possibility to print debug message about known missing parts only once
- add multiple levels of sysctl linux.debug:
1: print debug messages, tell about unimplemented stuff (only once)
2: like 1, but also print messages about implemented but not tested
stuff (only once)
3+: like 2, but no rate limiting of messages
- increase default linux debug level from 1 to 3
We are a lot more verbose in as we need to be (e.g. some of the IP socket
options which are the same, and share the same memory layout, and are
believed to work). The reason is that we have no good testsuite to test those
linux-bits. The LTP or other test suites like the python one, are not fully
up to the task we need. As such the excessive messages about emulated but not
tested socket options.
IMO any MFC (possible, but most probably not by me) should set the default
debug level to 1.
Discussed with: trasz
Provide a way to ask for an opaque version string for a locale_t, so
that potential changes in sort order can be detected. Similar to
ICU's ucol_getVersion() and Windows' GetNLSVersionEx(), this API is
intended to allow databases to detect when text order-based indexes
might need to be rebuilt.
The CLDR version is extracted from CLDR source data by the Makefile
under tools/tools/locale, written into the machine-generated Makefile
under shared/colldef, passed to localedef -V, and then written into
LC_COLLATE file headers. The initial version is 34.0.
tools/tools/locale was recently updated to pull down 35.0, but the
output hasn't been committed under share/colldef yet, so that will
provide the first observable change when it happens. Other versioning
schemes are possible in future, because the format is unspecified.
Reviewed by: bapt, 0mp, kib, yuripv (albeit a long time ago)
Differential Revision: https://reviews.freebsd.org/D17166
This provides an OpenCrypto driver for Intel QuickAssist devices. The
driver was initially ported from NetBSD and comes with a few
improvements:
- support for GMAC/AES-GCM, AES-CTR and AES-XTS, and support for
SHA/HMAC-authenticated encryption
- support for detaching the driver
- various bug fixes
- DH895X support
Discussed with: jhb
MFC after: 3 days
Sponsored by: Rubicon Communications, LLC (Netgate)
Differential Revision: https://reviews.freebsd.org/D26963
The former is intended for use in vmspace_exit(). The latter is to
encourage use of explicit loads rather than relying on the volatile
qualifier. This works better with kernel sanitizers, which can
intercept atomic(9) calls, and makes tricky lockless code easier to read
by not forcing the reader to remember which variables are declared
volatile.
Reviewed by: kib, mjg, mmel
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27056
LLVM's demangler supports more modern C++ constructs such as lambdas and
unnamed types, and is actively maintained. The command line tool is
usable as a drop-in replacement for GNU c++filt, or elftoolchain's
cxxfilt. The latter is still available by using WITHOUT_LLVM_CXXFILT, if
needed.
PR: 250702
MFC after: 2 weeks
Since elftoolchain's cxxfilt is rather far behind on features, and we
ran into several bugs, add an option to use llvm-cxxfilt as an drop-in
replacement.
It supports the same options as elftoolchain cxxfilt, though it doesn't
have support for old ARM (C++ Annotated Reference Manual, not the CPU)
and GNU v2 manglings. But these are irrelevant in 2020.
Note: as we already compile the required libraries as part of libllvm,
this will not add any significant build time either.
PR: 250702
Reviewed by: emaste, yuri
Differential Revision: https://reviews.freebsd.org/D27071
MFC after: 2 weeks
This option is intended to be semantically identical to Linux's
SOL_SOCKET:SO_PASSCRED. For now, it is mutually exclusive with the
pre-existing sockopt SOL_LOCAL:LOCAL_CREDS.
Reviewed by: markj (penultimate version)
Differential Revision: https://reviews.freebsd.org/D27011
Our own Ports Collection is not targeting those systems at the moment,
so let's stop documenting bits specific to OpenBSD and NetBSD in the ports
documentation. Especially, that it might bit rot one day.
MFC after: 1 week
It is rather common for the ports users to replace su(1) with sudo(8)
within the SU_CMD variable. Let's document it in the manual page (so far
it's been hidden in a comment within bsd.commands.mk).
MFC after: 2 weeks
This patch also introduces an environment variable BE_UTILITY,
which can be used to specify the utility to use for managing
ZFS boot environments (which can be either bectl or beadm).
While here, fix some typos in the manual page and
remove beadm from section "SEE ALSO".
Reviewed by: bcr, kevans, rpokala
Approved by: will
Differential Revision: https://reviews.freebsd.org/D21111
If you need / want to includerd sys/systm.h, it has to be just after
param.h/types.h. Document this existing practice. Not all kernel files
include systm.h, but when you do, it should be done out of order.
Reviewed by: vangyzen, kib, emaste
Differential Review: https://reviews.freebsd.org/D26981
Foundation copyrights, approved by emaste@. It does not include
files which carry other people's copyrights; if you're one
of those people, feel free to make similar change.
Reviewed by: emaste, imp, gbe (manpages)
Differential Revision: https://reviews.freebsd.org/D26980
libjail is pretty small, so it makes for a good proof of concept demonstrating
how a system library can be wrapped to create a loadable Lua module for flua.
* Introduce 3lua section for man pages
* Add libjail module
Reviewed by: kevans, manpages
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D26080
The NTB hardware starting with Skylake has some changes to the register
map and the doorbell interface. Add a new NTB_XEON_GEN3 device type and
use it to conditionalize driver logic that differs from the existing
Xeon code.
Reviewed by: vangyzen
Discussed with: cem, Bret Ketchum <Bret.Ketchum@dell.com>
MFC after: 1 month
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D26683
the failover protocol is supported due to limitations in the IPoIB
architecture. Refer to the lagg(4) manual page for how to configure
and use this new feature. A new network interface type,
IFT_INFINIBANDLAG, has been added, similar to the existing
IFT_IEEE8023ADLAG .
ifconfig(8) has been updated to accept a new laggtype argument when
creating lagg(4) network interfaces. This new argument is used to
distinguish between ethernet and infiniband type of lagg(4) network
interface. The laggtype argument is optional and defaults to
ethernet. The lagg(4) command line syntax is backwards compatible.
Differential Revision: https://reviews.freebsd.org/D26254
Reviewed by: melifaro@
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
